arXiv subjects

Igor Aharonovich

Publications and source records attributed to Igor Aharonovich.

At least 127 records · Page 7Linked to original sources

arXiv2020

Photonic nanobeam cavities with nano-pockets for efficient integration of fluorescent nanoparticles

Integrating fluorescent nanoparticles with high-Q, small mode volume cavities is indispensable for nanophotonics and quantum technologies. To date, nanoparticles have largely been coupled to evanescent fields of cavity modes, which limits the strength of the interaction. Here, we developed both a cavity design and a fabrication method that enable efficient coupling between a fluorescent nanoparticle and a cavity optical mode. The design consists of a fishbone-shaped, one-dimensional photonic crystal cavity with a nano-pocket located at the electric field maximum of the fundamental optical mode. Furthermore, the presence of a nanoparticle inside the pocket reduces the mode volume substantially and induces subwavelength light confinement. Our approach opens exciting pathways to achieve strong light confinement around fluorescent nanoparticles for applications in energy, sensing, lasing and quantum technologies.

physics.app-ph↗

arXiv2020

Strain Engineering of Quantum Emitters in Hexagonal Boron Nitride

Quantum emitters in hexagonal boron nitride (hBN) are promising building blocks for the realization of integrated quantum photonic systems. However, their spectral inhomogeneity currently limits their potential applications. Here, we apply tensile strain to quantum emitters embedded in few-layer hBN films and realize both red and blue spectral shifts with tuning magnitudes up to 65 meV, a record for any two-dimensional quantum source. We demonstrate reversible tuning of the emission and related photophysical properties. We also observe rotation of the optical dipole in response to strain, suggesting the presence of a second excited state. We derive a theoretical model to describe strain-based tuning in hBN, and the rotation of the optical dipole. Our work demonstrates the immense potential for strain tuning of quantum emitters in layered materials to enable their employment in scalable quantum photonic networks.

cond-mat.mtrl-sci↗

arXiv2019

Coupling hBN quantum emitters to 1D photonic crystal cavities

Quantum photonics technologies require a scalable approach for integration of non-classical light sources with photonic resonators to achieve strong light confinement and enhancement of quantum light emission. Point defects from hexagonal Boron Nitride (hBN) are amongst the front runners for single photon sources due to their ultra bright emission, however, coupling of hBN defects to photonic crystal cavities has so far remained elusive. Here we demonstrate on-chip integration of hBN quantum emitters with photonic crystal cavities from silicon nitride (Si3N4) and achieve experimentally measured Q-factor of 3,300 for hBN/Si3N4 hybrid cavities. We observed 9-fold photoluminescence enhancement of a hBN single photon emission at room temperature. Our work paves the way towards hybrid integrated quantum photonics with hBN, and outlines an excellent path for further development of cavity quantum electrodynamic experiments and on-chip integration of 2D materials.

physics.app-ph↗

arXiv2019

Second-harmonic generation in multilayer hexagonal boron nitride flakes

We report second-harmonic generation (SHG) from thick hexagonal boron nitride (hBN) flakes with approximately 109-111 layers. The resulting effective second-order susceptibility is similar to previously reported few-layer experiments. This confirms that thick hBN flakes can serve as a platform for nonlinear optics, which is useful because thick flakes are easy to exfoliate while retaining a large flake size. We also show spatial second-harmonic maps revealing that SHG remains a useful tool for the characterization of the layer structure even in the case of a large number of layers.

physics.optics↗

arXiv2019

Near-field energy transfer between a luminescent 2D material and color centers in diamond

Energy transfer between fluorescent probes lies at the heart of many applications ranging from bio-sensing and -imaging to enhanced photo-detection and light harvesting. In this work, we study Förster resonance energy transfer (FRET) between shallow defects in diamond --- nitrogen-vacancy (NV) centers --- and atomically-thin, two-dimensional materials --- tungsten diselenide (WSe$_2$). By means of fluorescence lifetime imaging, we demonstrate the occurrence of FRET in the WSe$_2$/NV system. Further, we show that in the coupled system, NV centers provide an additional excitation pathway for WSe$_2$ photoluminescence. Our results constitute the first step towards the realization of hybrid quantum systems involving single-crystal diamond and two-dimensional materials that may lead to new strategies for studying and controlling spin transfer phenomena and spin valley physics.

quant-ph↗

arXiv2019

Low-temperature electron-phonon interaction of quantum emitters in hexagonal Boron Nitride

Quantum emitters based on atomic defects in layered hexagonal Boron Nitride (hBN) have emerged as promising solid state 'artificial atoms' with atom-like photophysical and quantum optoelectronic properties. Similar to other atom-like emitters, defect-phonon coupling in hBN governs the characteristic single-photon emission and provides an opportunity to investigate the atomic and electronic structure of emitters as well as the coupling of their spin- and charge-dependent electronic states to phonons. Here, we investigate these questions using photoluminescence excitation (PLE) experiments at T=4K on single photon emitters in multilayer hBN grown by chemical vapor deposition. By scanning up to 250 meV from the zero phonon line (ZPL), we can precisely measure the emitter's coupling efficiency to different phonon modes. Our results show that excitation mediated by the absorption of one in-plane optical phonon increases the emitter absorption probability ten-fold compared to that mediated by acoustic or out-of-plane optical phonons. We compare these measurements against theoretical predictions by first-principles density-functional theory of four defect candidates, for which we calculate prevalent charge states and their spin-dependent coupling to bulk and local phonon modes. Our work illuminates the phonon-coupled dynamics in hBN quantum emitters at cryogenic temperature, with implications more generally for mesoscopic quantum emitter systems in 2D materials and represents possible applications in solid-state quantum technologies.

cond-mat.mes-hall↗

arXiv2019

Photonic devices fabricated from (111) oriented single crystal diamond

Diamond is a material of choice in the pursuit of integrated quantum photonic technologies. So far, the majority of photonic devices fabricated from diamond, are made from (100)-oriented crystals. In this work, we demonstrate a methodology for the fabrication of optically-active membranes from (111)-oriented diamond. We use a liftoff technique to generate membranes, followed by chemical vapour deposition of diamond in the presence of silicon to generate homogenous silicon vacancy colour centers with emission properties that are superior to those in (100)-oriented diamond. We further use the diamond membranes to fabricate high quality microring resonators with quality factors exceeding ~ 3000. Supported by finite difference time domain calculations, we discuss the advantages of (111) oriented structures as building blocks for quantum nanophotonic devices.

physics.optics↗

arXiv2019

Integrated on chip platform with quantum emitters in layered materials

Integrated quantum photonic circuitry is an emerging topic that requires efficient coupling of quantum light sources to waveguides and optical resonators. So far, great effort has been devoted to engineering on-chip systems from three-dimensional crystals such as diamond or gallium arsenide. In this study, we demonstrate room temperature coupling of quantum emitters embedded within a layered hexagonal boron nitride to an on-chip aluminium nitride waveguide. We achieved 1.2% light coupling efficiency of the device and realise transmission of single photons through the waveguide. Our results serve as a foundation for the integration of layered materials with on-chip components and for the realisation of integrated quantum photonic circuitry.

physics.app-ph↗

arXiv2019

Quantum Nanophotonics with Group IV defects in Diamond

Diamond photonics is an ever growing field of research driven by the prospects of harnessing diamond and its colour centres as suitable hardware for solid-state quantum applications. The last two decades have seen the field been shaped by the nitrogen-vacancy (NV) centre both with breakthrough fundamental physics demonstrations and practical realizations. Recently however, an entire suite of other diamond defects has emerged. They are M V colour centres, where M indicates one of the elements in the IV column of the periodic table Si, Ge, Sn and Pb, and V indicates lattice vacancies, i.e. missing next-neighbour carbon atoms. These centres exhibit a much stronger emission into the zero phonon line then the NV centre, they display inversion symmetry, and can be engineered using ion implantation all attractive features for scalable quantum photonic architectures based on solid-state, single-photon sources. In this perspective, we highlight the leading techniques for engineering and characterizing these diamond defects, discuss the current state-of-the-art of group IV-based devices and provide an outlook of the future directions the field is taking towards the realisation of solid-state quantum photonics with diamond.

physics.optics↗

arXiv2019

Revealing multiple classes of stable quantum emitters in hexagonal boron nitride with correlated cathodoluminescence, photoluminescence, and strain mapping

Single photon emitters (SPEs) in solids have emerged as promising candidates for quantum photonic sensing, communications, and computing. Defects in hexagonal boron nitride (hBN) exhibit high-brightness, room-temperature quantum emission, but their large spectral variability and unknown local structure significantly challenge their technological utility. Here, we directly correlate hBN quantum emission with the material's local strain using a combination of photoluminescence (PL), cathodoluminescence (CL) and nano-beam electron diffraction. Across 40 emitters and 15 samples, we observe zero phonon lines(ZPLs) in PL and CL ranging from 540-720 nm. CL mapping reveals that multiple defects and distinct defect species located within an optically-diffraction-limited region can each contribute to the observed PL spectra. Local strain maps indicate that strain is not required to activate the emitters and is not solely responsible for the observed ZPL spectral range. Instead, four distinct defect classes are responsible for the observed emission range. One defect class has ZPLs near 615 nm with predominantly matched CL-PL responses; it is not a strain-tuned version of another defect class with ZPL emission centered at 580 nm. A third defect class at 650 nm has low visible-frequency CL emission; and a fourth defect species centered at 705 nm has a small, ~10 nm shift between its CL and PL peaks. All studied defects are stable upon both electron and optical irradiation. Our results provide an important foundation for atomic-scale optical characterization of color centers, as well as a foundation for engineering defects with precise emission properties.

cond-mat.mtrl-sci↗

arXiv2019

Charge transition levels of quantum emitters in hexagonal boron nitride

Quantum emitters in layered materials are promising candidates for applications in nanophotonics. Here we present a technique based on charge transfer to graphene for measuring the charge transition levels ($\rm E_t$) of fluorescent defects in a wide bandgap 2D material, and apply it to quantum emitters in hexagonal boron nitride (hBN). Our results will aid in identifying the atomic structures of quantum emitters in hBN, as well as practical applications since $\rm E_t$ determines defect charge states and plays a key role in photodynamics.

cond-mat.mtrl-sci↗

arXiv2019

Room Temperature Initialisation and Readout of Intrinsic Spin Defects in a Van der Waals Crystal

Optically addressable spins in widebandgap semiconductors have become one of the most prominent platforms for exploring fundamental quantum phenomena. While several candidates in 3D crystals including diamond and silicon carbide have been extensively studied, the identification of spindependent processes in atomically thin 2D materials has remained elusive. Although optically accessible spin states in hBN are theoretically predicted, they have not yet been observed experimentally. Here, employing rigorous electron paramagnetic resonance techniques and photoluminescence spectroscopy, we identify fluorescence lines in hexagonal boron nitride associated with a particular defect, the negatively charged boron vacancy and determine the parameters of its spin Hamiltonian. We show that the defect has a triplet ground state with a zero field splitting of 3.5 GHz and establish that the centre exhibits optically detected magnetic resonance at room temperature. We also demonstrate the spin polarization of this centre under optical pumping, which leads to optically induced population inversion of the spin ground state a prerequisite for coherent spin manipulation schemes. Our results constitute a leap forward in establishing two dimensional hBN as a prime platform for scalable quantum technologies, with extended potential for spin based quantum information and sensing applications, as our ODMR studies on hBN NV diamonds hybrid structures show.

physics.optics↗

arXiv2019

Direct Measurement of Quantum Efficiency of Single Photon Emitters in Hexagonal Boron Nitride

Single photon emitters in two-dimensional materials are promising candidates for future generation of quantum photonic technologies. In this work, we experimentally determine the quantum efficiency (QE) of single photon emitters (SPE) in few-layer hexagonal boron nitride (hBN). We employ a metal hemisphere that is attached to the tip of an atomic force microscope to directly measure the lifetime variation of the SPEs as the tip approaches the hBN. This technique enables non-destructive, yet direct and absolute measurement of the QE of SPEs. We find that the emitters exhibit very high QEs approaching $(87 \pm 7)\,\%$ at wavelengths of $\approx\,580\,\mathrm{nm}$, which is amongst the highest QEs recorded for a solid state single photon emitter.

cond-mat.mes-hall↗

arXiv2019

Optical switching of resonance fluorescence from a single germanium vacancy color center in diamond

Scalable quantum photonic networks require coherent excitation of quantum emitters. However, many solid-state systems can undergo a transition to a dark shelving state that inhibits the fluorescence. Here we demonstrate that a controlled gating using a weak non-resonant laser, the resonant excitation can be recovered and amplified for single germanium vacancies (GeVs). Employing the gated resonance excitation, we achieve optically stable resonance fluorescence of GeV centers. Our results are pivotal for the deployment of diamond color centers as reliable building blocks for scalable solid state quantum networks.

cond-mat.mes-hall↗

arXiv2019

A Diamond-Photonics Platform Based on Silicon-Vacancy Centers in a Single Crystal Diamond Membrane and a Fiber-Cavity

We realize a potential platform for an efficient spin-photon interface, namely negatively-charged silicon-vacancy centers in a diamond membrane coupled to the mode of a fully-tunable, fiber-based, optical resonator. We demonstrate that introducing the thin ($\sim 200 \, \text{nm}$), single crystal diamond membrane into the mode of the resonator does not change the cavity properties, which is one of the crucial points for an efficient spin-photon interface. In particular, we observe constantly high Finesse values of up to $3000$ and a linear dispersion in the presence of the membrane. We observe cavity-coupled fluorescence froman ensemble of SiV$^{-}$ centers with an enhancement factor of $\sim 1.9$. Furthermore from our investigations we extract the ensemble absorption and extrapolate an absorption cross section of $(2.9 \, \pm \, 2) \, \cdot \, 10^{-12} \, \text{cm}^{2}$ for a single SiV$^{-}$ center, much higher than previously reported.

physics.app-ph↗

arXiv2019

Selective Defect Formation in Hexagonal Boron Nitride

Luminescent defect-centers in hexagonal boron nitride (hBN) have emerged as a promising 2D-source of single photon emitters (SPEs) due to their high brightness and robust operation at room temperature. The ability to create such emitters with well-defined optical properties is a cornerstone towards their integration into on-chip photonic architectures. Here, we report an effective approach to fabricate hBN single photon emitters (SPEs) with desired emission properties in two isolated spectral regions via the manipulation of boron diffusion through copper during atmospheric pressure chemical vapor deposition (APCVD)--a process we term gettering. Using the gettering technique we deterministically place the resulting zero-phonon line (ZPL) between the regions 550-600 nm or from 600-650 nm, paving the way for hBN SPEs with tailored emission properties across a broad spectral range. Our ability to control defect formation during hBN growth provides a simple and cost-effective means to improve the crystallinity of CVD hBN films, and lower defect density making it applicable to hBN growth for a wide range of applications. Our results are important to understand defect formation of quantum emitters in hBN and deploy them for scalable photonic technologies.

physics.app-ph↗

arXiv2019

Suppression of Spectral Diffusion by Anti-Stokes Excitation of Quantum Emitters in Hexagonal Boron Nitride

Solid-state quantum emitters are garnering a lot of attention due to their role in scalable quantum photonics. A notable majority of these emitters, however, exhibit spectral diffusion due to local, fluctuating electromagnetic fields. In this work, we demonstrate efficient Anti-Stokes (AS) excitation of quantum emitters in hexagonal boron nitride (hBN), and show that the process results in the suppression of a specific mechanism responsible for spectral diffusion of the emitters. We also demonstrate an all-optical gating scheme that exploits Stokes and Anti-Stokes excitation to manipulate spectral diffusion so as to switch and lock the emission energy of the photon source. In this scheme, reversible spectral jumps are deliberately enabled by pumping the emitter with high energy (Stokes) excitation; AS excitation is then used to lock the system into a fixed state characterized by a fixed emission energy. Our results provide important insights into the photophysical properties of quantum emitters in hBN, and introduce a new strategy for controlling the emission wavelength of quantum emitters.

physics.optics↗

arXiv2018

Hexagonal boron nitride cavity optomechanics

Hexagonal boron nitride (hBN) is an emerging layered material that plays a key role in a variety of two-dimensional devices, and has potential applications in nanophotonics and nanomechanics. Here, we demonstrate the first cavity optomechanical system incorporating hBN. Nanomechanical resonators consisting of hBN beams with predicted thickness between 8 nm and 51 nm were fabricated using electron beam induced etching and positioned in the optical nearfield of silicon microdisk cavities. A 160 fm/$\sqrt{\text{Hz}}$ sensitivity to the hBN nanobeam motion is demonstrated, allowing observation of thermally driven mechanical resonances with frequencies between 1 and 23 MHz, and mechanical quality factors reaching 1100 at room temperature in high vacuum. In addition, the role of air damping is studied via pressure dependent measurements. Our results constitute an important step towards realizing integrated optomechanical circuits employing hBN.

physics.optics↗