arXiv subjects

Igor S. Lobanov

Publications and source records attributed to Igor S. Lobanov.

9 recordsLinked to original sources

arXiv2026

Harnessing the skyrmion Hall effect for low-power skyrmion transport in a tubular synthetic antiferromagnet

We show that optimal control can turn the skyrmion Hall effect from a source of typically unwanted transverse motion into a mechanism for reducing Ohmic losses in skyrmion transport. We consider a pair of antiferromagnetically coupled skyrmions confined to a tubular geometry, where their relative transverse displacement becomes a periodic internal coordinate. The skyrmion Hall effect drives this coordinate, while finite interlayer coupling makes the resulting relation between applied current and longitudinal velocity nonlinear, allowing different current protocols to produce the same prescribed average velocity. We determine which of these protocols minimizes Joule heating. Depending on the interlayer coupling and spin-transfer-torque parameters, the optimal current is either constant, with the skyrmion pair maintaining a fixed relative position, or time dependent, with the pair undergoing periodic relative motion around the tube. In either case, the additional internal degree of freedom created by the skyrmion Hall effect and interlayer coupling enables skyrmion transport at a lower power than in the uncoupled limit.

cond-mat.mes-hall↗

arXiv2024

Optimal field-free magnetization switching via spin-orbit torque on the surface of a topological insulator

We present an optimal field-free protocol for current-induced switching of a perpendicularly magnetized ferromagnetic insulator nanoelement on the surface of a topological insulator. The time dependence of in-plane components of the surface current, which drives the magnetization reversal via the Dirac spin-orbit torque with minimal Joule heating, is derived analytically as a function of the switching time and material properties. Our analysis identifies that energy-efficient switching is achieved for vanishing damping-like torque. The optimal reversal time that balances switching speed and energy efficiency is determined. When we compare topological insulators to heavy-metal systems, we find similar switching costs for the optimal ratio between the spin-orbit torque coefficients. However, topological insulators offer the advantage of tunable material properties. Finally, we propose a robust and efficient simplified switching protocol using a down-chirped rotating current pulse, tailored to realistic ferromagnetic/topological insulator systems.

cond-mat.mes-hall↗

arXiv2023

Heliknoton in a film of cubic chiral magnet

Cubic chiral magnets exhibit a remarkable diversity of two-dimensional topological magnetic textures, including skyrmions. However, the experimental confirmation of topological states localized in all three spatial dimensions remains challenging. In this paper, we investigate a three-dimensional topological state called a heliknoton, which is a hopfion embedded into a helix or conic background. We explore the range of parameters at which the heliknoton can be stabilized under realistic conditions using micromagnetic modeling, harmonic transition state theory, and stochastic spin dynamics simulations. We present theoretical Lorentz TEM images of the heliknoton, which can be used for experimental comparison. Additionally, we discuss the stability of the heliknoton at finite temperatures and the mechanism of its collapse. Our study offers a pathway for future experimental investigations of three-dimensional topological solitons in magnetic crystals.

cond-mat.mes-hall↗

arXiv2022

Optimal protocol for spin-orbit torque switching of a perpendicular nanomagnet

It is demonstrated by means of the optimal control theory that the energy cost of the spin-orbit torque induced reversal of a nanomagnet with perpendicular anisotropy can be strongly reduced by proper shaping of both in-plane components of the current pulse. The time-dependence of the optimal switching pulse that minimizes the energy cost associated with Joule heating is derived analytically in terms of the required reversal time and material properties. The optimal reversal time providing a tradeoff between the switching speed and energy efficiency is obtained. A sweet-spot balance between the field-like and damping-like components of the spin-orbit torque is discovered; it permits for a particularly efficient switching by a down-chirped rotating current pulse whose duration does not need to be adjusted precisely.

cond-mat.mes-hall↗

arXiv2020

Stability of in-plane and out-of-plane chiral skyrmions in epitaxial MnSi(111)/Si(111) thin films: surface twists versus easy-plane anisotropy

The revisited theoretical phase diagrams for thin films of cubic helimagnets with the easy-plane anisotropy are shown to have different topology as previously reported [Phys. Rev. B 85, 094429 (2012)]. For both in-plane and out-of-plane directions of an applied magnetic field, the phase diagrams exhibit extensive areas of stable skyrmions, which overlap for a wide range of anisotropy parameters. Although the existence of the out-of-plane skyrmions was contradicted within the previous theoretical models, we prove that additional surface twists lead to their stability, while the moderate easy-plane anisotropy increases the stability range of in-plane skyrmions. Moreover, the interplay between the anisotropy and the surface twists gives rise to a stable spiral state canted with respect to the surfaces. Being absent in bulk helimagnets, this oblique spiral occupies vast areas at the phase diagrams in thin-film nanosystems and serves as a connecting-link between cones and helicoids. Our theory gives clear directions for renewed experimental studies of in-plane and out-of-plane skyrmions in epitaxial MnSi(111)/Si(111) thin films.

cond-mat.mes-hall↗

arXiv2020

Skyrmions in antiferromagnets: thermal stability and the effect of external field and impurities

Calculations of skyrmions in antiferromagnets (AFMs) are presented, and their properties compared with skyrmions in corresponding ferromagnets (FMs). The rates of skyrmion collapse and escape through the boundary of a track, as well as the binding to and collapse at a non-magnetic impurity, are calculated as a function of applied magnetic field. The activation energy for skyrmion annihilation is the same in AFMs and corresponding FMs in the absence of an applied magnetic field. The pre-exponential factor in the Arrhenius rate law is, however, different because skyrmion dynamics is different in the two systems. An applied magnetic field has opposite effects on skyrmions in the two types of materials. In AFMs the rate of collapse of skyrmions as well as the rate of escape through the edge of a magnetic strip decreases slightly with increasing field, while these rates increase strongly for a skyrmion in the corresponding FMs when the field is directed antiparallel to the magnetization in the center of the skyrmion. A non-magnetic impurity is less likely to trap a skyrmion in AFMs especially in the presence of a magnetic field. This, together with the established fact that a spin polarized current moves skyrmions in AFMs in the direction of the current, while in FMs skyrmions move at an angle to the current, demonstrates that skyrmions in AFMs have several advantageous properties over skyrmions in FMs for memory and spintronic devices.

cond-mat.mtrl-sci↗

arXiv2020

Magnetic Skyrmion Annihilation by Quantum Mechanical Tunneling

Magnetic skyrmions are nano-scale magnetic states that could be used in various spintronics devices. A central issue is the mechanism and rate of various possible annihilation processes and the lifetime of metastable skyrmions. While most studies have focused on classical over-the-barrier mechanism for annihilation, it is also possible that quantum mechanical tunneling through the energy barrier takes place. Calculations of the lifetime of magnetic skyrmions in a two-dimensional lattice are presented and the rate of tunneling compared with the classical annihilation rate. A remarkably strong variation in the crossover temperature and the lifetime of the skyrmion is found as a function of the values of parameters in the extended Heisenberg Hamiltonian, i.e. the out-of-plane anisotropy, Dzyaloshinskii-Moriya interaction (DMI) and applied magnetic field. Materials parameters and conditions are identified where the onset of tunneling could be observed on a laboratory time scale. In particular, it is predicted that skyrmion tunneling could be observed in the PdFe/Ir(111) system when an external magnetic field on the order of 6 T is applied.

cond-mat.mes-hall↗

arXiv2017

Energy surface and lifetime of magnetic skyrmions

The stability of skyrmions in various environments is estimated by analyzing the multidimensional surface describing the energy of the system as a function of the directions of the magnetic moments in the system. The energy is given by a Heisenberg-like Hamiltonian that includes Dzyaloshinskii-Moriya interaction, anisotropy and external magnetic field. Local minima on this surface correspond to the ferromagnetic and skyrmion states. Minimum energy paths (MEP) between the minima are calculated using the geodesic nudged elastic band method. The maximum energy along an MEP corresponds to a first order saddle point on the energy surface and gives an estimate of the activation energy for the magnetic transition, such as creation and annihilation of a skyrmion. The pre-exponential factor in the Arrhenius law for the rate, the so-called attempt frequency, is estimated within harmonic transition state theory where the eigenvalues of the Hessian at the saddle point and the local minima are used to characterize the shape of the energy surface. For some degrees of freedom, so-called 'zero modes', the energy of the system remains invariant. They need to be treated separately and give rise to temperature dependence of the attempt frequency. As an example application of this general theory, the lifetime of a skyrmion in a track of finite width for a PdFe overlayer on a Ir(111) substrate is calculated as a function of track width and external magnetic field. Also, the effect of non-magnetic impurities is studied. Various MEPs for annihilation inside a track, via the boundary of a track and at an impurity are presented. The attempt frequency as well as the activation energy has been calculated for each mechanism to estimate the transition rate as a function of temperature.

cond-mat.mtrl-sci↗

arXiv2017

The effect of confinement and defects on the thermal stability of skyrmions

The stability of magnetic skyrmions against thermal fluctuations and external perturbations is investigated within the framework of harmonic transition state theory for magnetic degrees of freedom. The influence of confined geometry and atomic scale non-magnetic defects on the skyrmion lifetime is estimated. It is shown that a skyrmion on a track has lower activation energy for annihilation and higher energy for nucleation if the size of the skyrmion is comparable with the width of the track. Two mechanisms of skyrmion annihilation are considered: inside the track and escape through the boundary. For both mechanisms, the dependence of activation energy on the track width is calculated. Non-magnetic defects are found to localize skyrmions in their neighborhood and strongly decrease the activation energy for creation and annihilation. This is in agreement with experimental measurements that have found nucleation of skyrmions in presence of spin-polarized current preferably occurring near structural defects.

cond-mat.mtrl-sci↗