arXiv subjects

Ihar Antonau

Publications and source records attributed to Ihar Antonau.

4 recordsLinked to original sources

arXiv2026

One-Way Thermo-Mechanical Coupled System Identification Using Displacement and Temperature Measurements

Structural system identification in the presence of thermal loads is challenging, as unmeasured or poorly modeled thermal effects can mask or mimic damage, leading to unreliable conclusions. This work presents an optimization-driven, adjoint-based high-fidelity system identification framework for localizing structural weakness and recovering the temperature field in one-way thermo-mechanical coupled structures. The methodology builds upon a standard optimization formulation that minimizes weighted discrepancies between simulated responses and measured data from a sparse displacement and temperature sensor network. To account for thermal effects, two strategies are proposed: a monolithic approach, which simultaneously identifies Young's modulus and temperature distributions, and a partitioned approach, which iteratively couples two inexact sub-problems through a Gauss-Seidel type fixed-point scheme. The proposed approaches are evaluated using two numerical examples -- a Plate With a Hole and a Footbridge model -- under linearly varying and localized thermal fields, and for different sensor layouts. Both approaches successfully recover the Young's modulus and temperature distributions, even when sensor placement does not fully capture the underlying thermal trends. Compared with a constant-temperature assumption and interpolation of the temperature field from sensor data, the proposed approach achieves the most accurate damage localization and temperature reconstruction. The largest gains occur when localized thermal features are poorly sampled by sensors, where interpolation and constant-temperature assumptions underperform. Furthermore, results show that the location of the temperature sensors is as influential as the number of sensors: well-placed sensors substantially improve identification, while additional sensors that miss critical thermal features provide limited benefit.

math.OC↗

arXiv2024

Adjoint-based Recovery of Thermal Fields from Displacement or Strain Measurements

A finite-element method dependant adjoint-based procedure to determine the temperature field of structures based on measured displacements or strains and a set of standard loads is developed and tested. Given a series of force and deformation measurements, the temperature field is obtained by minimizing the adequately weighted differences between the measured and computed values. Three numerical examples - a Plate With a Hole, a Bridge, and a Hoover Dam example - each with multiple sensors distributed in different configurations, demonstrate the procedure's capabilities. A target temperature distribution is prescribed in all cases, and the displacement sensor data is recorded. The optimization algorithm (here, steepest descent with Barzilai-Borwein step) uses this data to optimize the temperatures such that the same deformation is obtained at the sensor locations. Vertex Morphing is used as a filter to mitigate the ill-conditioning. Results show that the proposed approach can accurately reconstruct the target thermal distribution, especially when more sensors are used. Additionally, it is observed that the sensors do not need to be positioned in the region of interest; the method remains effective as long as the sensors can detect changes related to that area. A comparison with standard spatial interpolation techniques, namely, k-nearest neighbors and ordinary and universal kriging, is performed using temperature sensors in the same configurations. The proposed approach performs remarkably better than the interpolation techniques with a reduction in the root-mean-squared error of up to 38.4%, 94%, and 40%, for the Plate With a Hole, the Bridge, and the Dam examples, respectively.

math.OC↗

arXiv2024

Partitioned Surrogates and Thompson Sampling for Multidisciplinary Bayesian Optimization

The long runtime associated with simulating multidisciplinary systems challenges the use of Bayesian optimization for multidisciplinary design optimization (MDO). This is particularly the case if the coupled system is modeled in a partitioned manner and feedback loops, known as strong coupling, are present. This work introduces a method for Bayesian optimization in MDO called "Multidisciplinary Design Optimization using Thompson Sampling", abbreviated as MDO-TS. Instead of replacing the whole system with a surrogate, we substitute each discipline with such a Gaussian process. Since an entire multidisciplinary analysis is no longer required for enrichment, evaluations can potentially be saved. However, the objective and associated uncertainty are no longer analytically estimated. Since most adaptive sampling strategies assume the availability of these estimates, they cannot be applied without modification. Thompson sampling does not require this explicit availability. Instead, Thompson sampling balances exploration and exploitation by selecting actions based on optimizing random samples from the objective. We combine Thompson sampling with an approximate sampling strategy that uses random Fourier features. This approach produces continuous functions that can be evaluated iteratively. We study the application of this infill criterion to both an analytical problem and the shape optimization of a simple fluid-structure interaction example.

cs.CE↗

arXiv2019

A partitioned scheme for adjoint shape sensitivity analysis of fluid-structure interactions involving non-matching meshes

This work presents a partitioned solution procedure to compute shape gradients in fluid-structure interaction (FSI) using black-box adjoint solvers. Special attention is paid to project the gradients onto the undeformed configuration. This is due to the mixed Lagrangian-Eulerian formulation of large-displacement FSI in this work. Adjoint FSI problem is partitioned as an assembly of well-known adjoint fluid and structural problems, without requiring expensive cross-derivatives. The sub-adjoint problems are coupled with each other by augmenting the target functions with auxiliary functions, independent of the concrete choice of the underlying adjoint formulations. The auxiliary functions are linear force-based or displacement-based functionals which are readily available in well-established single-disciplinary adjoint solvers. Adjoint structural displacements, adjoint fluid displacements, and domain-based adjoint sensitivities of the fluid are the coupling fields to be exchanged between the adjoint solvers. A reduced formulation is also derived for the case of boundary-based adjoint shape sensitivity analysis for fluids. Numerical studies show that the complete formulation computes accurate shape gradients whereas inaccuracies appear in the reduced gradients, specially in regions of strong flow gradients and near singularities. Nevertheless, reduced gradient formulations are found to be a compromise between computational costs and accuracy. Mapping techniques including nearest element interpolation and the mortar method are studied in computational adjoint FSI. It is numerically shown that the mortar method does not introduce spurious oscillations in primal and sensitivity fields along non-matching interfaces, unlike the nearest element interpolation.

math.NA↗