arXiv subjects

Ilya A. Rodionov

Publications and source records attributed to Ilya A. Rodionov.

At least 19 recordsLinked to original sources

arXiv2026

High-fidelity two-qubit gates with transmon qubits using bipolar flux pulses and tunable couplers

High-fidelity two-qubit gates are essential for scalable quantum computing. We present a scheme based on superconducting transmon qubits and a control pulse delivery protocol that enables arbitrary controlled-phase gates modulated solely by an independent arbitrary waveform generator pulse. We combined a tunable coupler design with bipolar flux-pulsing to demonstrate a high-fidelity gate with a peak performance of $99.5\%$. Our gates inherit the advantages of both approaches: minimal residual ZZ coupling, built-in echo-like low-frequency noise protection, and time-scale control pulse reproducibility, while remaining easy to calibrate. We optimize the system energy levels to mitigate leakage to the coupler and suppress residual interactions. Numerical simulations of the scheme as three qutrits indicate that an error below $1 \times 10^{-3}$ is achievable. We confirm the scalability potential of the proposed scheme on high-fidelity 4-qubit and 8-qubit quantum processors

quant-ph↗

arXiv2026

Tantalum as a base material for superconducting integrated circuits

The performance of superconducting integrated circuits for quantum applications is fundamentally limited by material-related losses. Tantalum, as an emerging material for next-generation quantum circuits, has attracted considerable attention in recent years after demonstrating breakthrough performance in both superconducting microwave resonators and qubits. Concurrently, a growing body of work is devoted to the operation of tantalum-based circuits and related fabrication techniques. This interest is further stimulated by tantalum thin films polymorphism resulting in a variety of its crystalline structure, superconducting properties, coherence, etc. Furthermore, tantalum circuits exhibit distinctive features in cryogenic experiments, which have not been observed in aluminum- or niobium-based ones. In this review, we summarize the recent research of tantalum thin films growth and phase selection mechanisms on various substrates, key aspects of fabrication and performance of superconducting circuit, including a material first-principles theoretical study. In conclusion, we address a number of open issues, including the role of \b{eta}-phase impurities, the effect of hydrofluoric acid solutions on chain characteristics, and the anomalous behavior of α-tantalum chains at cryogenic temperatures.

quant-ph↗

arXiv2026

Superconducting single-photon detectors for integrated quantum photonics

Single-photon detection possibility is a fundamental requirement for quantum technologies, including communication, computing and sensing. To achieve scalability and practical deployment, increasing attention is being directed toward integration of detectors with photonic integrated circuits, which offer compactness and compatibility with mass production. Superconducting nanowire single-photon detectors have emerged as the leading solution, combining near-unity efficiency, high temporal performance and the ability to be embedded across a wide range of photonic material platforms. In this review we trace the development of integrated superconducting nanowire single-photon detectors from early demonstrations to recent advances, outlining the progress in device architectures, material engineering and integration strategies. We also discuss performance benchmarks, emerging alternative designs, the future opportunities and challenges for this rapidly evolving field.

physics.optics↗

arXiv2026

Superconducting integrated on-demand quantum memory with microwave pulse preservation

Microwave quantum memory represents a critical component for quantum radars and resource-efficient approaches to quantum error correction. Superconducting microwave resonators provide highly efficient storage, long coherence times, on-demand reading and even in memory pulse engineering, but it is still challenging to overcome design and materials induced loss channels for on-chip realization. In this work, we present a novel architecture of integrated superconducting quantum memory with a dynamically controlled RF-SQUID coupling element in pulse regime, thus ensuring high efficiency storage and cycling storage time. It demonstrates a memory cycle time of 1.51 $μs$ and 57.5% storage fidelity with preservation of the stored pulse shape during the retrieval at single-photon level excitations. We establish that while the proposed active coupler realization introduces no measurable fidelity degradation, the primary limitation arises from impedance matching and materials imperfections. Still the device was used only for storing finite-duration near-single-photon classical microwave pulses, we assert that it operates as a linear device when the photon population in the common resonator remains low so it should be compatible with quantum state storage.The proposed architecture highlights a disruptive potential for on-chip qubit and memory integration for scalable quantum error correction, while identifying specific avenues for near-unity storage fidelity.

quant-ph↗

arXiv2025

An engineering guide to superconducting quantum circuit shielding

In this review, we provide a practical guide on protection of superconducting quantum circuits from broadband electromagnetic and infrared-radiation noise by using cryogenic shielding and filtering of microwave lines. Recently, superconducting multi-qubit processors demonstrated quantum supremacy and quantum error correction below the surface code threshold. However, the decoherence-induced loss of quantum information still remains a challenge for more than 100 qubit quantum computing. Here, we review the key aspects of superconducting quantum circuits protection from stray electromagnetic fields and infrared radiation, namely, multilayer shielding design, materials, filtering of the fridge lines and attenuation, cryogenic setup configurations, and methods for shielding efficiency evaluation developed over the last 10 years. In summary, we make recommendations for creation of an efficient and compact shielding system as well as microwave filtering for a large-scale superconducting quantum systems.

quant-ph↗

arXiv2024

Integrated Electro-Optic Absorption Modulator for Silicon Nitride Platform

Silicon nitride (SiN) is currently the most prominent platform for photonics at visible and near-IR wavelength bandwidth. However, realizing fast electro-optic (EO) modulators, the key components of any integrated optics platform, remains challenging in SiN. Recently, transparent conductive oxides (TCO) have emerged as a promising platform for photonic integrated circuits. Here we make an important step towards exceeding possibilities of both platforms, reporting for the first-time high-speed ITO electro-optic modulators based on silicon nitride waveguides. The insertion losses of 5.7 dB and bandwidth of about 1 GHz are shown for 300 nm-thickness SiN waveguide platform with 9.3-um-length hybrid waveguide. The fabrication process of devices requires only standard clean room tools, is repeatable and compatible with the CMOS technology. Simulation results of optimized device designs indicate that further improvement is possible and offer promising opportunities towards silicon nitride photonic computation platforms based on ITO.

physics.optics↗

arXiv2024

Tutorial on Silicon Photonics Integrated Platform Fiber Edge Coupling

Photonic integrated circuits (PICs) play a crucial role in almost every aspect of modern life, such as data storage, telecommunications, medical diagnostics, green energy, autonomous driving, agriculture, and high-performance computing. To fully harness their benefits, an efficient coupling mechanism is required to successfully launch light into waveguides from fibers. This study introduces low-loss coupling strategies and their implementation for a silicon nitride integrated platform. Here we present an overview of coupling technologies, optimized designs, and a tutorial on manufacturing techniques for inverted tapers, which enable effective coupling for both transverse-magnetic and transverse-electric modes. The optimized coupling losses for the UHNA-7 fiber and the inverted taper Si3N4 coupler reached -0.15 dB at 1550 nm per connection for single-mode waveguides with 220x1200 nm cross section. The measured coupling losses in the inverted taper coupler with a standard single-mode fiber were -1.50 dB at 1550 nm per connection for the same platform.

physics.optics↗

arXiv2024

Silicon nitride integrated photonics from visible to mid-infrared spectra

Recently, silicon nitride (Si3N4) photonic integrated circuits (PICs) are of a great interest due to their extremely low waveguides losses. The number of Si3N4 integrated photonics platform applications is constantly growing including the Internet of Things (IoT), artificial intelligence (AI), light detection and ranging (LiDAR) devices, hybrid neuromorphic and quantum computing. Their heterogeneous integration with a III-V platform leads to a new advanced large scale PICs with thousands of elements. Here, we review key trends in Si3N4 integrated circuits technology and fill an information gap in the field of state-of-the-art photonic devices operating from visible to mid-infrared spectra. A comprehensive overview of Si3N4 integrared circtuis microfabrication process details (deposition, lithography, etching, etc.) is introduced. Finally, we point out the limits and challenges of silicon nitride photonics performance in an ultrawide range providing routes and prospects for their future scaling and optimization.

physics.optics↗

arXiv2024

Wafer-scale uniformity improvement of Dolan-bridge Josephson junction by shadow evaporation bias correction

One of the practical limitations of solid-state superconducting quantum processors technology is frequency crowding due to low qubits fabrication reproducibility. Josephson junction 100 nm-scale nonlinear inductance of the qubits still suffers from Dolan-bridge shadow evaporation process. Here, we report on a robust wafer-scale Al/AlOx/Al Dolan-bridge Josephson junction (JJ) process using preliminary shadow evaporation bias resist mask correction and comprehensive oxidation optimization. We introduce topology correction model for two-layer resist mask biasing at a wafer-scale, which takes into account an evaporation source geometry. It results in Josephson junction area variation coefficient improvement down to 1.1% for the critical dimensions from 130x170 nm2 to 130x670 nm2 over 70x70 mm2 (49 cm2) wafer working area. Next, we investigate JJ oxidation process (oxidation method, pressure and time) and its impact on a room temperature resistance reproducibility. Finally, we combine both shadow evaporation bias correction and oxidation best practices for 4-inch wafers improving room temperature resistance variation coefficient down to 6.0/5.2/4.1% for 0.025 μm2 JJ area and 4.0/3.4/2.3% for 0.090 μm2 JJ area for 49/25/16 cm2 wafer working area correspondingly. The proposed model and oxidation method can be useful for robust wafer-scale superconducting quantum processors fabrication.

quant-ph↗

arXiv2023

Wiring surface loss of a superconducting transmon qubit

Quantum processors using superconducting qubits suffer from dielectric loss leading to noise and dissipation. Qubits are usually designed as large capacitor pads connected to a non-linear Josephson junction (or SQUID) by a superconducting thin metal wiring. Here, we report on finite-element simulation and experimental results confirming that more than 50% of surface loss in transmon qubits can originated from Josephson junctions wiring and can limit qubit relaxation time. Extracting dielectric loss tangents capacitor pads and wiring based on their participation ratios, we show dominant surface loss of wiring can occur for real qubits designs. Then, we simulate a qubit coupled to a bath of individual TLS defects and show that only a small fraction (~18%) of coupled defects is located within the wiring interfaces, however, their coupling strength is much higher due to stronger electromagnetic field. Finally, we fabricate six tunable floating transmon qubits and experimentally demonstrate up to 20% improvement in qubit quality factor by wiring design optimization.

quant-ph↗

arXiv2023

Sputtered NbN Films for Ultrahigh Performance Superconducting Nanowire Single-Photon Detectors

Nowadays ultrahigh performance superconducting nanowire single-photon detectors are the key elements in a variety of devices from biological research to quantum communications and computing. Accurate tuning of superconducting material properties is a powerful resource for fabricating single-photon detectors with a desired properties. Here, we report on the major theoretical relations between ultrathin niobium nitride (NbN) films properties and superconducting nanowire single-photon detectors characteristics, as well as ultrathin NbN films properties dependence on reactive magnetron sputtering recipes. Based on this study we formulate the exact requirements to ultrathin NbN films for ultrahigh performance superconducting nanowire single-photon detectors. Then, we experimentally study ultrathin NbN films properties (morphology, crystalline structure, critical temperature, sheet resistance) on silicon, sapphire, silicon dioxide and silicon nitride substrates sputtered with various recipes. We demonstrate ultrathin NbN films (obtained with more than 100 films deposition) with a wide range of critical temperature from 2.5 to 12.1 K and sheet resistance from 285 to 2000 ~$Ω$/sq, as well as investigate a sheet resistance evolution over for more than 40\% within two years. Finally, we found out that one should use ultrathin NbN films with specific critical temperature near 9 K and sheet resistance of 400 ~$Ω$/sq for ultrahigh performance SNSPD.

cond-mat.supr-con↗

arXiv2023

Coupler microwave-activated controlled phase gate on fluxonium qubits

Tunable couplers have recently become one of the most powerful tools for implementing two-qubit gates between superconducting qubits. A tunable coupler typically includes a nonlinear element, such as a SQUID, which is used to tune the resonance frequency of an LC circuit connecting two qubits. Here we propose a complimentary approach where instead of tuning the resonance frequency of the tunable coupler by applying a quasistatic control signal, we excite by microwave the degree of freedom associated with the coupler itself. Due to strong effective longitudinal coupling between the coupler and the qubits, the frequency of this transition strongly depends on the computational state, leading to different phase accumulations in different states. Using this method, we experimentally demonstrate a CZ gate of 44 ns duration on a fluxonium-based quantum processor, obtaining a fidelity of $97.6\pm 0.4 \%$ characterized by cross-entropy benchmarking.

quant-ph↗

arXiv2022

Integrated membrane-free thermal flow sensor for silicon-on-glass microfluidics

Lab-on-a-chip (LOC) forms the basis of the new-generation portable analytical systems. LOC allows the manipulation of ultralow flows of liquid reagents and multistep reactions on a microfluidic chip, which requires a robust and precise instrument to control the flow of liquids on a chip. However, commercially available flow meters appear to be a standalone option adding a significant dead volume of tubes for connection to the chip. Furthermore, most of them cannot be fabricated within the same technological cycle as microfluidic channels. Here, we report on a membrane-free microfluidic thermal flow sensor (MTFS) that can be integrated into a silicon-glass microfluidic chip with a microchannel topology. We propose a membrane-free design with thin-film thermo-resistive sensitive elements isolated from microfluidic channels and 100 mm wafers silicon-glass fabrication route. It ensures MTFS compatibility with corrosive liquids, which is critically important for biological applications. MTFS design rules for the best sensitivity and measurement range are proposed. A method for automated thermo-resistive sensitive elements calibration is described. The device parameters are experimentally tested for hundreds of hours with a reference Coriolis flow sensor demonstrating a relative flow error of less than 5% within the range of 2-30 uL/min along with a sub-second time response.

physics.flu-dyn↗

arXiv2022

Low-loss silicon nitride photonic ICs for single-photon applications

Low-loss photonic integrated circuits (PICs) are the key elements in future quantum technologies, nonlinear photonics and neural networks. The low-loss photonic circuits technology targeting C-band application is well established across multi-project wafer (MPW) fabs, whereas near-infrared (NIR) PICs suitable for the state-of-the-art single-photon sources are still underdeveloped. Here, we report the labs-scale process optimization and optical characterization of low-loss tunable photonic integrated circuits for single-photon applications. We demonstrate the lowest propagation losses to the date (as low as 0.55 dB/cm at 925 nm wavelength) in single-mode silicon nitride submicron waveguides (220x550 nm). This performance is achieved due to advanced e-beam lithography and inductively coupled plasma reactive ion etching steps which yields waveguides vertical sidewalls with down to 0.85 nm sidewall roughness. These results provide a chip-scale low-loss PIC platform that could be even further improved with high quality SiO2 cladding, chemical-mechanical polishing and multistep annealing for extra-strict single-photon applications.

physics.optics↗

arXiv2022

Robust cryogenic matched low-pass coaxial filters for quantum computing applications

Electromagnetic noise is one of the key external factors decreasing superconducting qubits coherence. Matched coaxial filters can prevent microwave and IR photons negative influence on superconducting quantum circuits. Here, we report on design and fabrication route of matched low-pass coaxial filters for noise-sensitive measurements at milliKelvin temperatures. A robust transmission coefficient with designed linear absorption (-1dB/GHz) and ultralow reflection losses less than -20 dB up to 20 GHz is achieved. We present a mathematical model for evaluating and predicting filters transmission parameters depending on their dimensions. It is experimentally approved on two filters prototypes different lengths with compound of Cu powder and Stycast commercial resin demonstrating excellent matching. The presented design and assembly route are universal for various compounds and provide high repeatability of geometrical and microwave characteristics. Finally, we demonstrate three filters with almost equal reflection and transmission characteristics in the range from 0 to 20 GHz, which is quite useful to control multiple channel superconducting quantum circuits.

quant-ph↗

arXiv2022

Beyond single-crystalline metals: ultralow-loss silver films on lattice-mismatched substrates

High-quality factor plasmonic devices are crucial components in the fields of nanophotonics, quantum computing and sensing. The majority of these devices are required to be fabricated on non-lattice matched or transparent amorphous substrates. Plasmonic devices quality factor is mainly defined by ohmic losses, scattering losses at grain boundaries, and in-plane plasmonic scattering losses of a metal - substrate system. Here, we demonstrate the deposition technique to e-beam evaporate ultralow-loss silver thin films on transparent lattice-mismatched substrates. The process is based on evolutionary selection growth. The key feature of our approach is a well-defined control of deposition on a cooled substrate, self-crystallization and subsequent annealing for precise stress relaxation that promote further grains growth. We are able to deposit 100-nm thick ultraflat polycrystalline silver films with micrometer-scale grains and ultralow optical losses. Finally, we show ultra-high-quality factor plasmonic silver nanostructures on transparent lattice-mismatched substrate comparable to epitaxial silver. This can be of the great interest for high performance or single-molecule optical sensorics applications.

physics.optics↗

arXiv2022

Greatly Enhanced Emission from Spin Defects in Hexagonal Boron Nitride Enabled by a Low-Loss Plasmonic Nano-Cavity

Two-dimensional hexagonal boron nitride (hBN) has been known to host a variety of quantum emitters with properties suitable for a broad range of quantum photonic applications. Among them, the negatively charged boron vacancy (VB-) defect with optically addressable spin states has emerged recently due to its potential use in quantum sensing. Compared to spin defects in bulk crystals, VB- preserves its spin coherence properties when placed at nanometer-scale distances from the hBN surface, enabling nanometer-scale quantum sensing. On the other hand, the low quantum efficiency of VB- has hindered its use in practical applications. Several studies have reported improving the overall quantum efficiency of VB- defects using plasmonic effects; however, the overall enhancements of up to 17 times reported to date are relatively modest. In this study, we explore and demonstrate much higher emission enhancements of VB- with ultralow-loss nano-patch antenna (NPA) structures. An overall intensity enhancement of up to 250 times is observed for NPA-coupled VB- defects. Since the laser spot exceeds the area of the NPA, where the enhancement occurs, the actual enhancement provided by the NPA is calculated to be ~1685 times, representing a significant increase over the previously reported results. Importantly, the optically detected magnetic resonance (ODMR) contrast is preserved at such exceptionally strong enhancement. Our results not only establish NPA-coupled VB- defects as high-resolution magnetic field sensors operating at weak laser powers, but also provide a promising approach to obtaining single VB- defects.

physics.optics↗

arXiv2022

High fidelity two-qubit gates on fluxoniums using a tunable coupler

Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale superconductor-based quantum computing due to their better coherence and larger anharmonicity. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture with high fidelity single-qubit and two-qubit gates, single-shot readout and state initialization. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element following our theoretical proposal [DOI: 10.1063/5.0064800]. We experimentally demonstrate fSim-type and controlled-Z gates with $99.55\%$ and $99.23\%$ fidelities, respectively. The residual ZZ interaction is suppressed down to the few kHz level. Using a galvanically coupled flux control line, we implement high fidelity single-qubit gates and ground state initialization with a single arbitrary waveform generator channel per qubit.

quant-ph↗