arXiv subjects

Imad Agha

Publications and source records attributed to Imad Agha.

At least 19 recordsLinked to original sources

arXiv2022

Photonic Integrated Circuit for Rapidly Tunable Orbital Angular Momentum Generation Using Sb2Se3 Ultra-Low-Loss Phase Change Material

The generation of rapidly tunable Optical Vortex (OV) beams is one of the most demanding research areas of the present era as they possess Orbital Angular Momentum (OAM) with additional degrees of freedom that can be exploited to enhance signal-carrying capacity by using mode division multiplexing and information encoding in optical communication. Particularly, rapidly tunable OAM devices at a fixed wavelength in the telecom band stir extensive interest among researchers for both classical and quantum applications. This article demonstrates the realistic design of a Si-integrated photonic device for rapidly tunable OAM wave generation at a 1550-nm wavelength by using an ultra-low-loss Phase Change Material (PCM) embedded with a Si-ring resonator with angular gratings. Different OAM modes are achieved by tuning the effective refractive index using rapid electrical switching of Sb2Se3 film from amorphous to crystalline states and vice versa. The generation of OAM waves relies on a traveling wave modulation of the refractive index of the micro-ring, which breaks the degeneracy of oppositely oriented whispering gallery modes. The proposed device is capable of producing rapidly tunable OV beams, carrying different OAM modes by using electrically controllable switching of ultra-low-loss PCM Sb2Se3.

physics.optics↗

arXiv2021

Chiral Phase Change Nanomaterials

Chiral nanostructures offer the ability to respond to the vector nature of a light beam at the nanoscale. While naturally chiral materials offer a path towards scalability, engineered structures offer a path to wavelength tunability through geometric manipulation. Neither approach, however, allows for temporal control of chirality. Therefore, in the best of all worlds, it is crucial to realize chiral materials that possess the quality of scalability, tailored wavelength response, and dynamic control at high speeds. Here, a new class of intrinsically chiral phase change nanomaterials (PCNMs) is proposed and explored, based on a scalable bottom-up fabrication technique with a high degree of control in three dimensions. Angular resolved Mueller Matrix and spectroscopic ellipsometry are performed to characterize the optical birefringence and dichroism, and a numerical model is provided to explain the origin of optical activity. This work achieves the critical goal of demonstrating high-speed dynamic switching of chirality over 50,000 cycles via the underlying PCNM.

physics.optics↗

arXiv2021

Generation of four-dimensional hyperentangled N00N states and beyond with photonic orbital angular momentum and detection-basis control

Hyperentanglement of photonic light modes is a valuable resource in quantum information processing and quantum communication. Here we propose a new protocol using the interference of two optical nonlinearities and control of the heralding (detection) basis in the orbital-angular-momentum degree of freedom. This setup is capable of generating states which are both maximally- and hyper- entangled in at least four dimensions. The resultant state in the four-dimensional case is a generalization of the so-called N00N state (a maximally path-entangled state well known in quantum optics). The production of this state is "perfect" (in other words noise-less) at least in the ideal case, excluding experimental imperfections. The presented setup is very versatile, and with control of the detection and pumping protocols a massively-large parameter space, of arbitrarily-large dimensionality, may be searched for other states of interest. Also, we present specific cases demonstrating how the state may be tuned from two, to three, to four dimensions -- which may be of further theoretical and experimental interest.

quant-ph↗

arXiv2021

Ince-Gauss Photons in Turbulent Atmosphere: Effect of quantum numbers on beam resilience

In this work, we present an extensive analysis on the nature and performance of Ince-Gauss beams, elliptical solutions of the paraxial wave equation that have orbital angular momentum, as information carriers in turbulent atmosphere. We perform numerical simulations of the propagation of these beams, and focus on the effects that the order, degree and ellipticity parameters have on the robustness of the beams. We find that the choice of basis in which a mode is constructed does not greatly influence the mode performance and it is instead strongly affected by the combination of order and degree values.

physics.optics↗

arXiv2019

Phase change dynamics and 2-dimensional 4-bit memory in Ge2Sb2Te5 via telecom-band encoding

As modern computing gets continuously pushed up against the von Neumann Bottleneck -- limiting the ultimate speeds for data transfer and computation -- new computing methods are needed in order to bypass this issue and keep our computer's evolution moving forward, such as hybrid computing with an optical co-processor, all-optical computing, or photonic neuromorphic computing. In any of these protocols, we require an optical memory: either a multilevel/accumulator memory, or a computational memory. Here, we propose and demonstrate a 2-dimensional 4-bit fully optical non-volatile memory using Ge2Sb2Te5 (GST) phase change materials, with encoding via a 1550 nm laser. Using the telecom-band laser, we are able to reach deeper into the material due to the low-loss nature of GST at this wavelength range, hence increasing the number of optical write/read levels compared to previous demonstrations, while simultaneously staying within acceptable read/write energies. We verify our design and experimental results via rigorous numerical simulations based on finite element and nucleation theory, and we successfully write and read a string of characters using direct hexadecimal encoding.

physics.app-ph↗

arXiv2018

Influence of symmetry breaking on Fano-like resonances in high Figure of Merit planar terahertz metafilms

It is well established that nearly all high-quality (Q) Fano-like resonances in terahertz (THz) metasurfaces broaden as asymmetry increases, resulting in a decline of Q-factor and an increase in the resonance intensity. Therefore, in order to determine the optimal design for applications in THz sensing, a Figure of Merit (FoM) is required. Previous studies have identified the asymmetry regimes at which the peak FoM occurs for various, specific unit cell geometries. However to date, there is no systematic comparison of the resulting FoMs for common and novel geometries. Here, a THz planar metafilm featuring split ring resonators with four distributed capacitive gaps is investigated to compare three unique methods of implementing asymmetry: (1) adjacent L-bracket translation, (2) capacitive gap translation and (3) increasing gap width. The results obtained find that by translating two gaps and increasing the bottom gap width of the unit cell, the high-Q Fano-like resonances are $6 \times$ higher than the FoM for the fundamental dipole mode. This work further informs the design process for THz metasurfaces and as such will help to define their applications in photonics and sensing.

physics.app-ph↗

arXiv2018

Harmonic Generation in Metal-Insulator and Metal-Insulator-Metal Nanostructures

We report that the second and third harmonic signal reductions with insulator film surface coverage over a gold substrate gives a measure of the electron density in the spill out volume of the insulator, which is dubbed metal insulator gap states. For metal-insulator-metal (MIM) structures we observe enhancement saturation and quenching of the third harmonic efficiencies well above the efficiencies for metal-insulator (MI) samples. The measured optical harmonics of scattered light from MI and MIM systems are compared with detailed simulations of the nonlinear interactions including free electron spill out into the insulator, nonlocal and electron quantum tunneling effects. Gold coated substrates are covered with variable thin insulator film thicknesses using atomic layer deposition. Optical harmonics of light scattered from two insulator materials (ZnO and Al2O3) are measured in our experiments. Based on our simulations we conclude that the observed MIM signal enhancement effects are primarily due to nonlocal phenomena in an electron gas.

physics.optics↗

arXiv2018

Improving the performance of Ge$_2$Sb$_2$Te$_5$ materials via nickel doping: Towards RF-compatible phase-change devices

High-speed electrical switching of Ge2Sb2Te5 (GST) remains a challenging task due to the large impedance mismatch between the low-conductivity amorphous state and the high-conductivity crystalline state. In this letter, we demonstrate an effective doping scheme using nickel to reduce the resistivity contrast between the amorphous and crystalline states by nearly three orders of magnitude. Most importantly, our results show that doping produces the desired electrical performance without adversely affecting the film's optical properties. The nickel doping level is approximately 2% and the lattice structure remains nearly unchanged when compared with undoped-GST. The refractive indices at amorphous and crystalline states were obtained using ellipsometry which echoes the results from XRD. The material's thermal transport properties are measured using time-domain thermoreflectance (TDTR), showing no change upon doping. The advantages of this doping system will open up new opportunities for designing electrically reconfigurable high speed optical elements in the near-infrared spectrum.

cond-mat.mtrl-sci↗

arXiv2017

Electromagnetically induced transparency control in terahertz metasurfaces based on bright-bright mode coupling

We demonstrate a classical analogue of electromagnetically induced transparency (EIT) in a highly flexible planar terahertz metamaterial (MM) comprised of three-gap split ring resonators. The keys to achieve EIT in this system are the frequency detuning and hybridization processes between two bright modes coexisting in the same unit cell as opposed to bright-dark modes. We present experimental verification of two-bright mode coupling for a terahertz EIT-MM in the context of numerical results and theoretical analysis based on a coupled Lorentz oscillator model. In addition, a hybrid variation of the EIT-MM is proposed and implemented numerically in order to dynamically tune the EIT window by incorporating photosensitive silicon pads in the split gap region of the resonators. As a result, this hybrid MM enables the potential active optical control of a transition from the on-state (EIT mode) to the off-state (dipole mode).

physics.app-ph↗

arXiv2017

Polarization-dependent electromagnetic responses of ultrathin and highly flexible asymmetric terahertz metasurfaces

We report the polarization-dependent electromagnetic response from a series of novel terahertz (THz) metasurfaces where asymmetry is introduced through the displacement of two adjacent metallic arms separated by a distance $δ$. For all polarization states, the symmetric metasurface exhibits a low quality (Q) factor fundamental dipole mode. By breaking the symmetry, we experimentally observe a secondary dipole-like mode with a Q factor nearly $9\times$ higher than the fundamental resonance. As $δ$ increases, the fundamental dipole mode $f_{1}$ redshifts and the secondary mode $f_{2}$ blueshifts creating a highly transmissive spectral window. Polarization-dependent measurements reveal a full suppression of $f_{2}$ for all asymmetries at $θ\geq 60^\circ$. Furthermore, at $δ\geq 60 \text{ }μ\text{m}$, we observe a polarization selective electromagnetic induced transparency (EIT) for the fundamental mode. This work paves the way for applications in filtering, sensing and slow-light devices common to other high Q factor THz metasurfaces with EIT-like response.

physics.app-ph↗

arXiv2016

All-optical switching via four-wave mixing Bragg scattering in a silicon platform

We employ the process of non-degenerate four-wave mixing Bragg scattering (FWM-BS) to demonstrate all-optical control in a silicon platform. In our configuration, a strong, non-information-carrying pump is mixed with a weak control pump and an input signal in a silicon-on-insulator waveguide. Through the optical nonlinearity of this highly-confining waveguide, the weak pump controls the wavelength conversion process from the signal to an idler, leading to a controlled depletion of the signal. The strong pump, on the other hand, plays the role of a constant bias. In this work, we show experimentally that it is possible to implement this low-power switching technique as a first step towards universal optical logic gates, and test the performance with random binary data. Even at very low powers, where the signal and control pump levels are almost equal, the eye-diagrams remain open, indicating a successful operation of the logic gates.

physics.optics↗

arXiv2014

Spectral broadening and shaping of nanosecond pulses: towards shaping of single photons from quantum emitters

We experimentally demonstrate spectral broadening and shaping of exponentially-decaying nanosecond pulses via nonlinear mixing with a phase-modulated pump in a periodically-poled lithium niobate (PPLN) waveguide. A strong, 1550~nm pulse is imprinted with a temporal phase and used to upconvert a weak 980 nm pulse to 600 nm while simultaneously broadening the spectrum to that of a Lorentzian pulse up to 10 times shorter. While the current experimental demonstration is for spectral shaping, we also provide a numerical study showing the feasibility of subsequent spectral phase correction to achieve temporal compression and re-shaping of a 1~ns mono-exponentially decaying pulse to a 250 ps Lorentzian, which would constitute a complete spectro-temporal waveform shaping protocol. This method, which uses quantum frequency conversion in PPLN with >100:1 signal-to-noise ratio, is compatible with single photon states of light.

physics.optics↗

arXiv2013

A chip-scale, telecommunications-band frequency conversion interface for quantum emitters

We describe a chip-scale, telecommunications-band frequency conversion interface designed for low-noise operation at wavelengths desirable for common single photon emitters. Four-wave mixing Bragg scattering in silicon nitride waveguides is used to demonstrate frequency upconversion and downconversion between the 980 nm and 1550 nm wavelength regions, with signal-to-background levels >10 and conversion efficiency of approximately -60 dB at low continuous wave input pump powers (<50 mW). Finite element simulations and the split-step Fourier method indicate that increased input powers of approximately 10 W (produced by amplified nanosecond pulses, for example) will result in a conversion efficiency >25 % in existing geometries. Finally, we present waveguide designs that can be used to connect shorter wavelength (637 nm to 852 nm) quantum emitters with 1550 nm.

quant-ph↗

arXiv2012

Experimental wavelength division multiplexed photon pair distribution

We have experimentally implemented the distribution of photon pairs produced by spontaneous parametric down conversion through telecom dense wavelength division multiplexing filters. Using the measured counts and coincidences between symmetric channels, we evaluate the maximum fringe visibility that can be obtained with polarization entangled photons and compare different filter technologies.

quant-ph↗

arXiv2012

Improving the performance of bright quantum dot single photon sources using amplitude modulation

Single epitaxially-grown semiconductor quantum dots have great potential as single photon sources for photonic quantum technologies, though in practice devices often exhibit non-ideal behavior. Here, we demonstrate that amplitude modulation can improve the performance of quantum-dot-based sources. Starting with a bright source consisting of a single quantum dot in a fiber-coupled microdisk cavity, we use synchronized amplitude modulation to temporally filter the emitted light. We observe that the single photon purity, temporal overlap between successive emission events, and indistinguishability can be greatly improved with this technique. As this method can be applied to any triggered single photon source, independent of geometry and after device fabrication, it is a flexible approach to improve the performance of solid-state systems, which often suffer from excess dephasing and multi-photon background emission.

quant-ph↗

arXiv2012

Two-photon interference using background-free quantum frequency conversion of single photons from a semiconductor quantum dot

We show that quantum frequency conversion (QFC) can overcome the spectral distinguishability common to inhomogeneously broadened solid-state quantum emitters. QFC is implemented by combining single photons from an InAs quantum dot (QD) at 980 nm with a 1550 nm pump laser in a periodically-poled lithium niobate (PPLN) waveguide to generate photons at 600 nm with a signal-to-background ratio exceeding 100:1. Photon correlation and two-photon interference measurements confirm that both the single photon character and wavepacket interference of individual QD states are preserved during frequency conversion. Finally, we convert two spectrally separate QD transitions to the same wavelength in a single PPLN waveguide and show that the resulting field exhibits non-classical two-photon interference.

quant-ph↗

arXiv2012

Low-noise on-chip frequency conversion by four-wave-mixing Bragg scattering in SiNx waveguides

Low-noise, tunable wavelength-conversion through non-degenerate four-wave mixing Bragg scattering in SiNx waveguides is experimentally demonstrated. Finite element method simulations of waveguide dispersion are used with the split-step Fourier method to predict device performance, and indicate a strong dependence of the conversion efficiency on phase matching, which is controlled by the waveguide geometry. Two 1550 nm wavelength band pulsed pumps are used to achieve tunable conversion of a 980 nm signal over a range of 5 nm with a peak conversion efficiency of \approx 5 %. The demonstrated Bragg scattering process is suitable for frequency conversion of quantum states of light.

physics.optics↗

arXiv2012

Background-free quantum frequency conversion of single photons from a semiconductor quantum dot

We demonstrate background-free quantum frequency conversion of single photons from an epitaxially-grown InAs quantum dot. Single photons at \approx 980 nm are combined with a pump laser near 1550 nm inside a periodically-poled lithium niobate (PPLN) waveguide, generating single photons at \approx 600 nm. The large red-detuning between the pump and signal wavelengths ensures nearly background-free conversion, avoiding processes such as upconversion of anti-Stokes Raman scattered pump photons in the PPLN crystal. Second-order correlation measurements on the single photon stream are performed both before and after conversion, confirming the preservation of photon statistics during the frequency conversion process.

quant-ph↗