arXiv subjects

Iman Rahbari

Publications and source records attributed to Iman Rahbari.

3 recordsLinked to original sources

arXiv2022

Unsteadiness of Shock-Boundary Layer Interactions in a Mach 2.0 Supersonic Turbine Cascade

The physics of shock-boundary layer interactions (SBLIs) in a supersonic turbine cascade at Mach 2.0 and Reynolds number 395,000, based on the axial chord, is investigated through a wall-resolved large eddy simulation. Special attention is given to the characterization of the low-frequency dynamics of the separation bubbles using flow visualization, spectral analysis, space-time cross correlations, and flow modal decomposition. The mean flowfield shows different shock structures formed on both sides of the airfoil. On the suction side, an oblique shock impinges on the turbulent boundary layer, whereas a Mach reflection interacts with the pressure side boundary layer. The interactions taking place in the present turbine cascade show similarities and discrepancies with respect to more canonical cases. For example, the characteristic frequencies of the shock/bubble motions are comparable to those described in the literature of canonical cases. However, the suction side bubble leads to compression waves that do not coalesce into a separation shock, and a thin bubble forms on the pressure side despite the strong normal shock from the Mach reflection. Instantaneous flow visualizations illustrate elongated streamwise structures on the incoming boundary layers and their interactions with the shocks and separation bubbles. The space-time cross-correlations reveal that the near-wall streaks drive the motion of the suction side separation bubble, which in turn promotes oscillations of the reattachment shock and shear layer flapping. Organized motions in the SBLIs and their corresponding characteristic frequencies and spatial support are identified using proper orthogonal decomposition.

physics.flu-dyn↗

arXiv2017

Quasi-Spectral Sparse Bi-Global Stability Analysis of Compressible Channel Flow over Complex Impedance

We have developed a fully sparse, compact-scheme based biglobal stability analysis numerical solver applied, for the scope of the current paper, to the investigation of the effects of impedance boundary conditions (IBCs) on the structure of a fully developed compressible turbulent channel flow. A sixth-order compact finite difference scheme is used to discretize the linearized Navier-Stokes equations leading to a Generalized Eigenvalue Problem (GEVP). Sparsity is retained by explicitly introducing derivatives of the perturbation as additional unknowns, increasing the overall problem size (number of columns $\times$ number of rows) while significantly reducing the number of non-zeros and the computational cost with respect to traditional implementations yielding otherwise dense matrix blocks. The resulting GEVP is coded in Python and solved employing an Message Passing Interface (MPI) parallelized PETSc-based sparse eigenvalue solver adopting a modified Arnoldi algorithm. Base flow is taken from impermeable isothermal-wall turbulent channel flow simulations at bulk Reynolds number, $Re_b= 6900$ and Mach number, $M_b = 0.85$. The eigenvalue spectrum calculated in the biglobal stability analysis shows distinct groups of modes associated with a discrete set of streamwise wave numbers accommodated by computational domain. An iterative strategy for the imposition of the complex IBCs, which are a nonlinear function of the real-valued (Fourier) frequency in the GEVP, has been devised. The adopted IBC specifically represents an array of sub-surface-mounted Helmholtz cavities with resonant frequency, $f_{res}$, covered by a porous sheet with permeability inversely proportional to the impedance resistance $R$. The tunable resonant frequency has been shown to be an attractor for the instability, yielding a single unstable mode at that frequency.

physics.flu-dyn↗

arXiv2015

Linear Stability Analysis of Compressible Channel Flow with Porous Walls

We have investigated the effects of permeable walls, modeled by linear acoustic impedance with zero reactance, on compressible channel flow via linear stability analysis (LSA). Base flow profiles are taken from impermeable isothermal-wall laminar and turbulent channel flow simulations at bulk Reynolds number, $Re_b$= 6900 and Mach numbers, $M_b$ = 0.2, 0.5, 0.85. For a sufficiently high value of permeability, Two dominant modes are made unstable: a bulk pressure mode, causing symmetric expulsion and suction of mass from the porous walls (Mode 0); a standing-wave-like mode, with a pressure node at the centerline (Mode I). In the case of turbulent mean flow profiles, both modes generate additional Reynolds shear stresses augmenting the (base) turbulent ones, but concentrated in the viscous sublayer region; the trajectories of the two modes in the complex phase velocity space follow each other closely for values of wall permeability spanning two orders of magnitude, suggesting their coexistence. The transition from subcritical to supercritical permeability does not alter the structure of the two modes for the range of wavenumbers investigated, suggesting that wall permeability simply accentuates pre-existing otherwise stable modes. Results from the present investigation will inform the design of new compressible turbulent boundary layer control strategies via assigned wall-impedance.

physics.flu-dyn↗