arXiv subjects

Inna Popov

Publications and source records attributed to Inna Popov.

5 recordsLinked to original sources

arXiv2026

Direct large-area observation of subsurface plastic activity in conditioned copper electrodes

High-field conditioning is the process by which radio-frequency structures in particle accelerators and other high-gradient devices reach their operating fields, yet the underlying physical mechanism remains an open question. Models and indirect measurements point to subsurface dislocation dynamics, but large-area structural measurements have been missing. We present electron backscatter diffraction measurements spanning millimeter-scale regions on a copper cathode conditioned at pulsed direct-current fields up to $\sim$80~MV/m in a sloped-anode geometry, which imposes a known gradient of field exposure across a single electrode. Across nine regions of interest spanning this exposure range, the mean intragrain misorientation of field-exposed regions exceeds that of unexposed references by $\sim$75\%; the difference is reproduced by three independent misorientation metrics and confirmed by Kolmogorov--Smirnov tests. To our knowledge, this is the first large-area observation of structural differences between conditioned and unconditioned regions of a high-field electrode. The misorientation separates into three tiers (high-field center and edge, low-field periphery, and unexposed reference) that match the spatial profile of the conditioning-state variable $E_S$ predicted by Monte Carlo simulations. These observations point to the evolving subsurface dislocation population as a candidate physical basis of conditioning.

cond-mat.mtrl-sci↗

arXiv2024

Surface and sub-surface modifications of copper electrodes exposed to high-field conditioning at cryogenic temperatures

In order to investigate the dependence of conditioning and field-holding on temperature, three pairs of copper electrodes underwent high voltage conditioning with direct current (DC) pulses while kept at a single temperature, unique for each set (300~K, 30~K and 10~K), until saturation field for each set was found. The sets conditioned at cold showed a significant increase in the field holding capability, reaching fields up to 147 MV/m after tens of millions of pulses and very few breakdowns (BDs). We interpret this as an indication of the conditioning effect being due to high field pulsing rather than exposure to BDs. The effect of the warm and cold conditioning was investigated with high-resolution microscopy, characterizing the BD spots on the anode and cathode according to their morphology and with scanning transmission electron microscopy (STEM) analyzing the changes in the sub-surface regions. Atypical BD spot features were found on the cryogenically conditioned cathode surfaces, with very shallow craters of a star-like shape. The number of atypical spots increased with decreased temperatures, reaching 26 and 53 percent of the total number of spots at 30~K and 10~K, respectively. A hypothesis explaining the formation of these features is also presented. The very different morphology of the anode and cathode BD spots is presented in detail that suggesting an unknown shielding mechanism that prevents the center of the anode spot from melting. These results provide important experimental input for the development of quantitative theories and models for BD initiation and inter-electrode plasma formation.

physics.acc-ph↗

arXiv2021

Synthesis of InAs/CdSe/ZnSe Core/Shell1/Shell2 Structures with Bright and Stable Near-Infrared Fluorescence

A complex InAs/CdSe/ZnSe Core/Shell1/Shell2 (CSS) structure is synthesized, where the intermediate CdSe buffer layer decreases strain between the InAs core and the ZnSe outer shell. This structure leads to significantly improved fluorescence quantum yield as compared to previously prepared core/shell structures and enables growth of much thicker shells. The shell growth is done using a layer-by-layer method in which the shell cation and anion precursors are added sequentially allowing for excellent control and a good size distribution is maintained throughout the entire growth process. The CSS structure is characterized using transmission electron microscopy, as well as by X-ray diffraction and X-ray-photoelectron spectroscopy which provide evidence for shell growth. The quantum yield for CSS with small InAs cores reaches over 70% - exceptional photoluminescence intensity for III-V semiconductor nanocrystals. In larger InAs cores there is a systematic decrease in the quantum yield, with a yield of ~40% for intermediate size cores down to a few percent in large cores. The CSS structures also exhibit very good photostability, vastly improved over those of organically coated cores, and transformation into water environment via ligand exchange is performed without significant decrease of the quantum yield. These new InAs/CdSe/ZnSe CSS nanocrystals are therefore promising near-IR chromophores for biological fluorescence tagging and optoelectronic devices.

physics.app-ph↗

arXiv2019

Theory of electric field breakdown nucleation due to mobile dislocations

A model is described, in which electrical breakdown in high-voltage systems is caused by stochastic fluctuations of the mobile dislocation population in the cathode. In this model, the mobile dislocation density normally fluctuates, with a finite probability to undergo a critical transition due to the effects of the external field. It is suggested that once such a transition occurs, the mobile dislocation density will increase deterministically, leading to electrical breakdown. Model parametrization is achieved via microscopic analysis of OFHC Cu cathode samples from the CERN CLIC project, allowing the creation and depletion rates of mobile dislocations to be estimated as a function of the initial physical condition of the material and the applied electric field. We find analytical expressions for the mean breakdown time and quasistationary probability distribution of the mobile dislocation density, and verify these results by using a Gillespie algorithm. A least-squares algorithm is used to fit these results with available experimental data of the dependence of the breakdown rate on the applied strength of the electric field and on temperature. The effects of the variation of some of the assumptions of the physical model are considered, and a number of additional experiments to validate the model are proposed, which include examining the effects of the temperature and pulse length, as well as of a time-dependent electric field, on the breakdown rate. Finally, applications of the model are discussed, including the usage of the quasistatic probability distribution to predict breakdowns, and applying the predictions of the model to improve the conditioning process of the cathode material.

physics.acc-ph↗

arXiv2019

Coupled Colloidal Quantum Dot Molecules

Coupling of atoms is the basis of chemistry, yielding the beauty and richness of molecules. We utilize semiconductor nanocrystals as artificial atoms to form nanocrystal molecules that are structurally and electronically coupled. CdSe/CdS core/shell nanocrystals are linked to form dimers which are then fused via constrained oriented attachment. The possible nanocrystal facets in which such fusion takes place are analyzed with atomic resolution revealing the distribution of possible crystal fusion scenarios. Coherent coupling and wavefunction hybridization are manifested by a red shift of the band gap, in agreement with quantum mechanical simulations. Single nanoparticle spectroscopy unravels the attributes of coupled nanocrystal dimers related to the unique combination of quantum mechanical tunneling and energy transfer mechanisms. This sets the stage for nanocrystals chemistry to yield a diverse selection of coupled nanocrystal molecules constructed from controlled core/shell nanocrystal building blocks. These are of direct relevance for numerous applications in displays, sensing, biological tagging and emerging quantum technologies.

physics.app-ph↗