arXiv subjects

Ioannis Krikidis

Publications and source records attributed to Ioannis Krikidis.

At least 37 records · Page 2Linked to original sources

arXiv2026

Quantum Rotation Diversity in Displaced Squeezed Binary Phase-Shift Keying

We propose a quantum rotation diversity (QRD) scheme for optical quantum communication using binary phase-shift-keying displaced squeezed states and homodyne detection over Gamma-Gamma turbulence channels. Consecutive temporal modes are coupled by a passive orthogonal rotation that redistributes the displacement amplitude between slots, yielding a diversity order of two under independent fading and joint maximum-likelihood detection. Analytical expressions for the symbol-error rate performance, along with asymptotic results for the diversity and coding gains, are derived. The optimal rotation angle and energy allocation between displacement and squeezing are obtained in closed form. Furthermore, we show that when both the displacement amplitude and the squeezing strength scale with the total photon number, an effective diversity order of four is achieved. Numerical results validate the analysis and demonstrate the super-diversity behaviour of the proposed QRD scheme.

cs.IT↗

arXiv2026

Quantum Optical Integrated Sensing and Communication with Homodyne BPSK Detection

In this letter, we propose a quantum integrated sensing and communication scheme for a quantum optical link using binary phase-shift keying modulation and homodyne detection. The link operates over a phase-insensitive Gaussian channel with an unknown deterministic phase rotation, where the homodyne receiver jointly carries out symbol detection and phase estimation. We formulate a design problem that minimizes the bit-error rate subject to a Fisher information-based constraint on estimation accuracy. To solve it, we develop an iterative algorithm composed of an inner expectation-maximization loop for joint detection and estimation and an outer loop that adaptively retunes the local oscillator phase. Numerical results confirm the effectiveness of the proposed approach and demonstrate a fundamental trade-off between communication reliability and sensing accuracy.

cs.IT↗

arXiv2025

Sub-6 GHz Beam-Reconfigurable Microfluidic Antenna Using Graphene Liquid for 5G Network

As wireless communication systems continue to grow rapidly, high-performance antennas become increasingly crucial for expanding coverage, improving capacity, and enhancing transmission quality. In light of this, research has focused considerable attention on liquid antennas due to their unique characteristics, which include small size, flexibility, reconfigurability and transparency. Recently, graphene liquid has been explored for numerous applications due to its low cost, high conductivity, flexibility, and ease of processing. Specifically for antenna applications, graphene liquid performs better than conventional liquid metal. This paper presents a graphene-liquid antenna with beam reconfiguration ability for sub-6 GHz communication system. The graphene-liquid movement within the microfluidic channel is taken into consideration by the reconfiguration mechanism. The antenna achieves beam reconfiguration in 360° directions with 6 dBi of gain at 5.5 GHz, featuring a wideband impedance bandwidth of 24%. The antenna main beam is specifically reconfigured into six directions (0°, 45°, 135°, 180°, 225° and 315°) at 5.5 GHz. Additionally, in all six reconfigurable scenarios at 5.5 GHz, the antenna provides a stable reflection coefficient. Therefore, for the next generation of wireless communication systems, this novel design of graphene-liquid-based reconfigurable sub-6 GHz antennas holds promise.

eess.SP↗

arXiv2025

Joint Power Allocation and Reflecting-Element Activation for Energy Efficiency Maximization in IRS-Aided Communications Under CSI Uncertainty

We study the joint power allocation and reflecting element (RE) activation to maximize the energy efficiency (EE) in communication systems assisted by an intelligent reflecting surface (IRS), taking into account imperfections in channel state information (CSI). The robust optimization problem is mixed integer, i.e., the optimization variables are continuous (transmit power) and discrete (binary states of REs). In order to solve this challenging problem we develop two algorithms. The first one is an alternating optimization (AO) method that attains a suboptimal solution with low complexity, based on the Lambert W function and a dynamic programming (DP) algorithm. The second one is a branch-and-bound (B&B) method that uses AO as its subroutine and is formally guaranteed to achieve a globally optimal solution. Both algorithms do not require any external optimization solver for their implementation. Furthermore, numerical results show that the proposed algorithms outperform the baseline schemes, AO achieves near-optimal performance in most cases, and B&B has low computational complexity on average.

eess.SP↗

arXiv2025

Quantum Optimization in Wireless Communication Systems: Principles and Applications

Quantum optimization is poised to play a transformative role in the design of next-generation wireless communication systems by addressing key computational and technological challenges. This paper provides an overview of the principles of adiabatic quantum computing, the foundation of quantum optimization, and explores its two primary computational models: quantum annealing and the gate-based quantum approximate optimization algorithm. By highlighting their core features, performance benefits, limitations, and distinctions, we position these methods as promising tools for advancing wireless communication system design. As a case study, we examine the design of passive reconfigurable intelligent surface beamforming with binary phase-shift resolution, supported by experimental results obtained from real-world quantum hardware.

cs.IT↗

arXiv2025

Lightwave Power Transfer-Enabled Underwater Optical ISAC Systems under Ship Attitude Variation

In this paper, we propose a lightwave power transfer-enabled underwater optical integrated sensing and communication (O-ISAC) system, where an access point (AP) mounted on a seasurface ship transmits lightwave signals to two nodes, namely ($i$) a seabed sensor that harvests energy and transmits uplink information to the AP, and ($ii$) a sensing target whose position is estimated by the AP using an array of pinhole cameras. To capture practical deployment conditions, the ship attitude variation is modeled through its roll, pitch, and yaw angles, each following a Gaussian distribution under low-to-moderate sea states. Closed-form approximations are derived for the mean squared error (MSE) of target localization and the achievable uplink data rate. Analytical and simulation results demonstrate excellent agreement, validating the proposed models and derived expressions, while revealing the fundamental communication-sensing tradeoff in the O-ISAC system. The results further provide valuable design insights, including the optimal camera placement on the ship to minimize localization error, achieving a minimum MSE of $10^{-2}$ $\text{m}^2$ with multiple cameras under roll, pitch, and yaw angle variation of $10^{\circ}$, and the optimal harvest-use ratio of $0.55$ for the considered setup.

eess.SY↗

arXiv2025

Quantum Approximate Optimization Algorithm for MIMO with Quantized b-bit Beamforming

Multiple-input multiple-output (MIMO) is critical for 6G communication, offering improved spectral efficiency and reliability. However, conventional fully digital designs face significant challenges due to high hardware complexity and power consumption. Low-bit MIMO architectures, such as those employing b-bit quantized phase shifters, provide a cost-effective alternative but introduce NP-hard combinatorial problems in the pre- and post-coding design. This paper explores the use of the Quantum Approximate Optimization Algorithm (QAOA) and alternating optimization to address the problem of b-bit quantized phase shifters both at the transmitter and the receiver. We demonstrate that the structure of this quantized beamforming problem aligns naturally with hybrid-classical methods like QAOA, as the phase shifts used in beamforming can be directly mapped to rotation gates in a quantum circuit. Notably, this paper is the first to show that theoretical connection. Then, the Hamiltonian derivation analysis for the b-bit case is presented, which could have applications in different fields, such as integrated sensing and communication, and emerging quantum algorithms such as quantum machine learning. In addition, a warm-start QAOA approach is studied which improves computational efficiency. Numerical results highlight the effectiveness of the proposed methods in achieving an improved quantized beamforming gain over their classical optimization benchmarks from the literature.

cs.ET↗

arXiv2025

Chaotic Noncoherent SWIPT in Multi-Functional RIS-Aided Systems

In this letter, we investigate the design of chaotic signal-based transmit waveforms in a multi-functional reconfigurable intelligent surface (MF-RIS)-aided set-up for simultaneous wireless information and power transfer. We propose a differential chaos shift keying-based MF-RIS-aided set-up, where the MF-RIS is partitioned into three non-overlapping surfaces. The elements of the first sub-surface perform energy harvesting (EH), which in turn, provide the required power to the other two sub-surfaces responsible for transmission and reflection of the incident signal. By considering a frequency selective scenario and a realistic EH model, we characterize the chaotic MF-RIS-aided system in terms of its EH performance and the associated bit error rate. Thereafter, we characterize the harvested energy-bit error rate trade-off and derive a lower bound on the number of elements required to operate in the EH mode. Accordingly, we propose novel transmit waveform designs to demonstrate the importance of the choice of appropriate system parameters in the context of achieving self-sustainability.

eess.SY↗

arXiv2025

Constrained Higher-Order Binary Optimization for Wireless Communications Systems Using Ising Machines

This paper develops an algorithmic solution using Ising machines to solve large-scale higher-order binary optimization (HOBO) problems with inequality constraints for resource optimization in wireless communications systems. Quadratic unconstrained binary optimization (QUBO) aims to solve a special category of these problems widely encountered in engineering and science. To solve QUBO instances, specialized Ising machines have been designed, while sophisticated quantum annealing algorithm and quantum-inspired classical heuristics have been developed. However, the application of QUBO in wireless communications has limited practical interest mainly due to the complexity of resource optimization problems which are often characterized by high-order polynomial terms and strict inequality constraints. To overcome these bottlenecks and take advantage of recent advancements in Ising machines, in this paper, we propose an iterative algorithmic solution to solve HOBO problems, which is based on the augmented Lagrangian method to handle constraints. Specifically, Taylor expansion is employed to approximate higher-order polynomials to quadratic ones in the augmented Lagrangian function, which enables the solution of a single QUBO problem at each iteration without auxiliary variables. As an illustrative case study, we consider the problem of phase optimization in a simultaneous wireless information and power transfer system, where a reconfigurable intelligent surface with 1-bit phase resolution is used to facilitate information/energy transfer. Simulation results verify that the proposed algorithm achieves satisfactory performance and outperforms heuristic benchmark schemes.

cs.IT↗

arXiv2025

1-bit RIS-aided Index Modulation with Quantum Annealing

In this paper, we investigate a new index modulation (IM) scheme for reconfigurable intelligent surface (RIS)-assisted communications with 1-bit RIS phase resolution. In addition to the traditional modulated symbols, extra bits of information are embedded in the binary RIS phase vector by indexing the cardinality of the positive phases shifts. To maximize capacity, the IM-based RIS vector is selected so as to maximize the signal-to-noise ratio at the receiver. The proposed IM design requires the solution of a quadratic binary optimization problem with an equality constraint at the transmitter as well as a quadratic unconstrained binary optimization (QUBO) problem at the receiver. Since commercial solvers cannot directly handle constraints, a penalty method that embeds the equality constraint in the objective function is investigated. To overcome the empirical tuning of the penalty parameter, an iterative Augmented Lagrangian optimization technique is also investigated where a QUBO problem is solved at each iteration. The proposed design and associated mathematical framework are tested in a real-world quantum annealing device provided by D-WAVE. Rigorous experimental results demonstrate that the D-WAVE heuristic efficiently solves the considered combinatorial problems. Furthermore, theoretical bounds on the average capacity are provided. Both experimental and theoretical results show that the proposed design outperforms conventional counterparts.

cs.IT↗

arXiv2025

Tesla meets Helstrom: a Wireless-Powered Quantum Optical System

This letter investigates a novel wireless-powered quantum optical communication system, in which a batteryless quantum transmitter harvests energy from a classical radio-frequency source to transmit quantum coherent states. The transmission employs M-ary phase shift keying (M-PSK) modulation over an optical channel impaired by thermal noise, and the fundamental detection performance is evaluated using the Helstrom bound. An optimization framework is proposed that jointly determines the optimal quantum measurement and the energy-harvesting time fraction to maximize the effective rate under a block time constraint. Analytical expressions are derived for special cases, while semidefinite programming techniques are employed for the general M-PSK scenario. Numerical results validate the unimodal nature of the effective rate function and demonstrate the impact of the optimal design parameters.

cs.IT↗

arXiv2025

Asymmetric Modulation Design for Fluid-Antenna SWIPT Systems

In this work, we propose the design of modulation schemes that improve the rate-energy region of fluid antenna-assisted simultaneous wireless information and power transfer (SWIPT) systems. By considering the nonlinear characteristics of practical energy harvesting circuits, we formulate a dual-objective rate-energy (RE) region optimization problem to jointly maximize the discrete-input mutual information (DIMI) and harvested current. The problem is solved using the epsilon-constraint method and optimized constellations are designed for various energy harvesting thresholds. We then evaluate the performance of the optimized constellations under three different fluid antenna (FA) port selection strategies: (i) Best Port, (ii) Fixed Port, and (iii) Random Port. Our simulation results demonstrate significant performance gains of optimized constellations over conventional constellations in both information rate and energy harvesting.

eess.SP↗

arXiv2025

Soft Robotics-Inspired Flexible Antenna Arrays

In this work, a novel soft continuum robot-inspired antenna array is proposed, featuring tentacle-like structures with multiple antenna elements. The proposed array achieves reconfigurability through continuous deformation of its geometry, in contrast to reconfigurable antennas which incur a per-element control. More specifically, the deformation is modeled by amplitude and spatial frequency parameters. We consider a multi-user multiple-input single-output downlink system, whereby the optimal deformation parameters are found to maximize the sum rate in the network. A successive convex approximation method is adopted to solve the problem. Numerical results show that the proposed deformable array significantly outperforms fixed geometry and per-element reconfigurable arrays in sum rate, demonstrating the benefits of structure-level flexibility for next-generation antenna arrays.

cs.IT↗

arXiv2025

Optimization of Liquid Lens-based Imaging Receiver for MIMO VLC Systems

In this paper, a liquid lens-based imaging receiver is proposed for multiple-input multiple-output (MIMO) visible light communication (VLC) systems. By dynamically adjusting the focal length and orientation angles of the liquid lens, the spatial correlation between MIMO channel gains is reduced, leading to enhanced bit-error rate (BER) performance. Unlike static lenses, liquid lenses offer adaptability in dynamic conditions, including user mobility and random receiver orientation. An accurate mathematical framework is developed to model the channel gains of the proposed system, and an optimization problem is formulated to minimize its BER. Due to the complexity of the resulting channel model, two lens adjustment schemes, namely, ($i$) the CLS scheme, and ($ii$) the VULO scheme are introduced. Numerical results demonstrate that the proposed liquid lens-based system offers substantial BER improvements over conventional static lens-based receivers across a wide range of random receiver orientation conditions. Specifically, at a random receiver orientation variance of $10^{\circ}$, the BER is improved from $4\times 10^{-2}$ to $5\times 10^{-4}$ by employing the proposed liquid lens.

eess.SP↗

arXiv2025

Dependability Theory-based Statistical QoS Provisioning of Fluid Antenna Systems

Fluid antenna systems (FAS) have recently emerged as a promising technology for next-generation wireless networks, offering real-time spatial reconfiguration to enhance reliability, throughput, and energy efficiency. Nevertheless, existing studies often overlook the temporal dynamics of channel fading and their implications for mission-critical operations. In this paper, we propose a dependability-theoretic framework for statistical quality-of-service (QoS) provisioning of FAS under finite blocklength (FBL) constraints. Specifically, we derive new closed-form expressions for the level-crossing rate (LCR) and average fade duration (AFD) of an $N$-port FAS over Nakagami-$m$ fading channels. Leveraging these second-order statistics, we define two key dependability metrics such as mission reliability and mean time-to-first-failure (MTTFF), to quantify the probability of uninterrupted operation over a defined mission duration. We further extend the classical effective capacity (EC) concept to incorporate mission reliability in the FBL regime, yielding a mission EC (mEC). To capture energy efficiency under bursty traffic and latency constraints, we also develop the mission effective energy efficiency (mEEE) metric and formulate its maximization as a non-convex fractional optimization problem. This problem is then solved via a modified Dinkelbach's method with an embedded line search. Extensive simulations uncover critical trade-offs among port count, QoS exponent, signal-to-noise ratio, and mission duration, offering insights for the design of ultra-reliable, low-latency, and energy-efficient industrial internet-of-things (IIoT) systems.

eess.SP↗

arXiv2025

Liquid Lens-Based Imaging Receiver for MIMO VLC Systems

In this paper, we consider a tunable liquid convex lens-assisted imaging receiver for indoor multiple-input multiple-output (MIMO) visible light communication (VLC) systems. In contrast to existing MIMO VLC receivers that rely on fixed optical lenses, the proposed receiver leverages the additional degrees of freedom offered by liquid lenses via adjusting both focal length and orientation angles of the lens. This capability facilitates the mitigation of spatial correlation between the channel gains, thereby enhancing the overall signal quality and leading to improved bit-error rate (BER) performance. We present an accurate channel model for the liquid lens-assisted VLC system by using three-dimensional geometry and geometric optics. To achieve optimal performance under practical conditions such as random receiver orientation and user mobility, optimization of both focal length and orientation angles of the lens are required. To this end, driven by the fact that channel models are mathematically complex, we present two optimization schemes including a blockwise machine learning (ML) architecture that includes convolution layers to extract spatial features from the received signal, long-short term memory layers to predict the user position and orientation, and fully connected layers to estimate the optimal lens parameters. Numerical results are presented to compare the performance of each scheme with conventional receivers. Results show that a significant BER improvement is achieved when liquid lenses and presented ML-based optimization approaches are used. Specifically, the BER can be improved from $6\times 10^{-2}$ to $1.4\times 10^{-3}$ at an average signal-to-noise ratio of $30$ dB.

eess.SP↗

arXiv2025

Hybrid RIS With Sub-Connected Active Partitions: Performance Analysis and Transmission Design

The emerging reflecting intelligent surface (RIS) technology promises to enhance the capacity of wireless communication systems via passive reflect beamforming. However, the product path loss limits its performance gains. Fully-connected (FC) active RIS, which integrates reflect-type power amplifiers into the RIS elements, has been recently introduced in response to this issue. Also, sub-connected (SC) active RIS and hybrid FC-active/passive RIS variants, which employ a limited number of reflect-type power amplifiers, have been proposed to provide energy savings. Nevertheless, their flexibility in balancing diverse capacity requirements and power consumption constraints is limited. In this direction, this study introduces novel hybrid RIS structures, wherein at least one reflecting sub-surface (RS) adopts the SC-active RIS design. The asymptotic signal-to-noise-ratio of the FC-active/passive and the proposed hybrid RIS variants is analyzed in a single-user single-input single-output setup. Furthermore, the transmit and RIS beamforming weights are jointly optimized in each scenario to maximize the energy efficiency of a hybrid RIS-aided multi-user multiple-input single-output downlink system subject to the power consumption constraints of the base station and the active RSs. Numerical simulation and analytic results highlight the performance gains of the proposed RIS designs over benchmarks, unveil non-trivial trade-offs, and provide valuable insights.

cs.IT↗

arXiv2025

DCSK-based Waveform Design for Self-sustainable RIS-aided Noncoherent SWIPT

This paper investigates the problem of transmit waveform design in the context of a chaotic signal-based self-sustainable reconfigurable intelligent surface (RIS)-aided system for simultaneous wireless information and power transfer (SWIPT). Specifically, we propose a differential chaos shift keying (DCSK)-based RIS-aided point-to-point set-up, where the RIS is partitioned into two non-overlapping surfaces. The elements of the first sub-surface perform energy harvesting (EH), which in turn, provide the required power to the other sub-surface operating in the information transfer (IT) mode. In this framework, by considering a generalized frequency-selective Nakagami-m fading scenario as well as the nonlinearities of the EH process, we derive closed-form analytical expressions for both the bit error rate (BER) at the receiver and the harvested power at the RIS. Our analysis demonstrates, that both these performance metrics depend on the parameters of the wireless channel, the transmit waveform design, and the number of reflecting elements at the RIS, which switch between the IT and EH modes, depending on the application requirements. Moreover, we show that, having more reflecting elements in the IT mode is not always beneficial and also, for a given acceptable BER, we derive a lower bound on the number of RIS elements that need to be operated in the EH mode. Furthermore, for a fixed RIS configuration, we investigate a trade-off between the achievable BER and the harvested power at the RIS and accordingly, we propose appropriate transmit waveform designs. Finally, our numerical results illustrate the importance of our intelligent DCSK-based waveform design on the considered framework.

eess.SP↗