arXiv subjects

Ioannis Krikidis

Publications and source records attributed to Ioannis Krikidis.

At least 91 records · Page 5Linked to original sources

arXiv2022

RC Filter Design for Wireless Power Transfer: A Fourier Series Approach

In this letter, we study the impact of the low-pass resistor-capacitor (RC) filter on radio frequency (RF) wireless power transfer (WPT). The RC filter influences both the RF bandwidth by removing the harmonics as well as the ripple voltage at the output of the rectifier. In particular, a large (small) RC time constant, reduces (increases) the ripple but decreases (enhances) the direct-current (DC) component. By following a Fourier series approach, we obtain closed-form expressions for the rectifier's output voltage, the RC filter's output as well as the DC voltage. Our analytical framework provides a complete characterization of the RC filter's impact on the WPT performance. We show that this complete and tractable analytical framework is suitable for the proper design of the RC filter in WPT systems.

eess.SP↗

arXiv2022

An Evolutionary Game for Mobile User Access Mode Selection in sub-$6$ GHz/mmWave Cellular Networks

By utilizing the combination of two powerful tools i.e., stochastic geometry (SG) and evolutionary game theory (EGT), in this paper, we study the problem of mobile user (MU) mode selection in heterogeneous sub-$6$ GHz/millimeter wave (mmWave) cellular networks. Particularly, by using SG tools, we first propose an analytical framework to assess the performance of the considered networks in terms of average signal-to-interference-plus-noise (SINR) ratio, average rate, and mobility-induced time overhead, for scenarios with user mobility{.} According to the SG-based framework, an EGT-based approach is presented to solve the problem of access mode selection. Specifically, two EGT-based models are considered, where for each MU its utility function depends on the average SINR and the average rate, respectively, while the time overhead is considered as a penalty term. A distributed algorithm is proposed to reach the evolutionary equilibrium, where the existence and stability of the equilibrium is theoretically analyzed and proved. Moreover, we extend the formulation by considering information delay exchange and evaluate its impact on the convergence of the proposed algorithm. Our results reveal that the proposed technique can offer better spectral efficiency and connectivity in heterogeneous sub-$6$ GHz/mmWave cellular networks with mobility, compared with the conventional access mode selection techniques.

eess.SP↗

arXiv2021

On the Design of Magnetic Resonant Coupling for Wireless Power Transfer in Multi-Coil Networks

Wireless power transfer (WPT) is a promising technology for powering up distributed devices in machine type networks. Over the last decade magnetic resonant coupling (MRC) received significant interest from the research community, since it is suitable for realizing mid-range WPT. In this paper, we investigate the performance of a single cell MRC-WPT network with multiple receivers, each equipped with an electromagnetic coil and a load. We first consider pre-adjusted loads for the receivers and by taking into account spatial randomness, we derive the harvesting outage probability of a receiver; for both the strong and loosely coupling regions. Then, we develop a non-cooperative game for a fixed receiver topology, in order to acquire the optimal load which maximizes each receiver's harvested power. Throughout our work, we obtain insights for key design parameters and present numerical results which validate our analysis.

eess.SP↗

arXiv2021

Design and Analysis of SWIPT with Safety Constraints

Simultaneous wireless information and power transfer (SWIPT) has long been proposed as a key solution for charging and communicating with low-cost and low-power devices. However, the employment of radio frequency (RF) signals for information/power transfer needs to comply with international health and safety regulations. In this paper, we provide a complete framework for the design and analysis of far-field SWIPT under safety constraints. In particular, we deal with two RF exposure regulations, namely, the specific absorption rate (SAR) and the maximum permissible exposure (MPE). The state-of-the-art regarding SAR and MPE is outlined together with a description as to how these can be modeled in the context of communication networks. We propose a deep learning approach for the design of robust beamforming subject to specific information, energy harvesting and SAR constraints. Furthermore, we present a thorough analytical study for the performance of large-scale SWIPT systems, in terms of information and energy coverage under MPE constraints. This work provides insights with regards to the optimal SWIPT design as well as the potentials from the proper development of SWIPT systems under health and safety restrictions.

eess.SP↗

arXiv2021

A Markov Chain Approach for Myopic Multi-hop Relaying: Outage and Diversity Analysis

In this paper, a cooperative protocol is investigated for a multi-hop network consisting of relays with buffers of finite size, which may operate in different communication modes. The protocol is based on the myopic decode-and-forward strategy, where each node of the network cooperates with a limited number of neighboring nodes for the transmission of the signals. Each relay stores in its buffer the messages that were successfully decoded, in order to forward them through the appropriate channel links, based on its supported communication modes. A complete theoretical framework is investigated that models the evolution of the buffers and the transitions at the operations of each relay as a state Markov chain (MC). We analyze the performance of the proposed protocol in terms of outage probability and derive an expression for the achieved diversity-multiplexing tradeoff, by using the state transition matrix and the related steady state of the MC. Our results show that the proposed protocol outperforms the conventional multi-hop relaying scheme and the system's outage probability as well as the achieved diversity order depend on the degree of cooperation among neighboring nodes and the communication model that is considered for every relay of the network.

cs.IT↗

arXiv2021

Rate Splitting with Wireless Edge Caching: A System-Level-based Co-design

Rate splitting (RS) and wireless edge caching are essential means for meeting the quality of service requirements of future wireless networks. In this work, we focus on the cross-layer co-design of wireless edge caching schemes with sophisticated physical layer techniques, which facilitate non-orthogonal multiple access and interference mitigation. A flexible caching-aided RS (CRS) technique is proposed that operates in various modes that specify the cache placement at the receivers. We consider two caching policies: the intelligent coded caching (CC), as well as the well-known most popular content (MPC) policy. Both caching policies are integrated within the design parameters of RS in order to serve multiple cache-enabled receivers. The proposed technique is investigated from a system level perspective by taking into account spatial randomness. We consider a single cell network consisting of center and edge receivers and provide a comprehensive analytical framework for the evaluation of the proposed technique in terms of achieved rates. Specifically, we derive the rate achieved at each receiver under minimum rate constraints while incorporating the cache placement characteristics. Numerical results are presented which highlight the flexibility of the proposed technique and show how caching can be exploited in order to further boost the performance of RS.

eess.SP↗

arXiv2021

Estimation-Energy Tradeoff for Scalar Gauss-Markov Signals with Kalman Filtering

In this letter, we investigate a receiver architecture, which uses the received signal in order to simultaneously harvest energy and estimate a Gauss-Markov linear process. We study three communication scenarios: i) static channel, ii) Rayleigh block-fading channel, and iii) high power amplifier (HPA) nonlinearities at the transmitter side. Theoretical results for the minimum mean square error as well as the average harvested energy are given for all cases and the fundamental tradeoff between estimation quality and harvested energy is characterized. We show that channel fading improves the estimation performance while HPA requires an extended Kalman filter at the receiver and significantly affects both the estimation and the harvesting efficiency.

cs.IT↗

arXiv2021

Multi-dimensional Lorenz-Based Chaotic Waveforms for Wireless Power Transfer

In this paper, we investigate multi-dimensional chaotic signals with respect to wireless power transfer (WPT). Specifically, we analyze a multi-dimensional Lorenz-based chaotic signal under a WPT framework. By taking into account the nonlinearities of the energy harvesting process, closed-form analytical expressions for the average harvested energy are derived. Moreover, the practical limitations of the high power amplifier (HPA) at the transmitter are also taken into consideration. We interestingly observe that for these types of signals, high peak-to-average-power-ratio (PAPR) is not the only criterion for obtaining enhanced WPT. We demonstrate that while the HPA imperfections do not significantly affect the signal PAPR, it notably degrades the energy transfer performance. As the proposed framework is general, we also demonstrate its application with respect to a Henon signal based WPT. Finally we compare Lorenz and Henon signals with the conventional multisine waveforms in terms of WPT performance.

eess.SP↗

arXiv2021

Embedding Model Based Fast Meta Learning for Downlink Beamforming Adaptation

This paper studies the fast adaptive beamforming for the multiuser multiple-input single-output downlink. Existing deep learning-based approaches assume that training and testing channels follow the same distribution which causes task mismatch, when the testing environment changes. Although meta learning can deal with the task mismatch, it relies on labelled data and incurs high complexity in the pre-training and fine tuning stages. We propose a simple yet effective adaptive framework to solve the mismatch issue, which trains an embedding model as a transferable feature extractor, followed by fitting the support vector regression. Compared to the existing meta learning algorithm, our method does not necessarily need labelled data in the pre-training and does not need fine-tuning of the pre-trained model in the adaptation. The effectiveness of the proposed method is verified through two well-known applications, i.e., the signal to interference plus noise ratio balancing problem and the sum rate maximization problem. Furthermore, we extend our proposed method to online scenarios in non-stationary environments. Simulation results demonstrate the advantages of the proposed algorithm in terms of both performance and complexity. The proposed framework can also be applied to general radio resource management problems.

cs.IT↗

arXiv2021

Model-driven Learning for Generic MIMO Downlink Beamforming With Uplink Channel Information

Accurate downlink channel information is crucial to the beamforming design, but it is difficult to obtain in practice. This paper investigates a deep learning-based optimization approach of the downlink beamforming to maximize the system sum rate, when only the uplink channel information is available. Our main contribution is to propose a model-driven learning technique that exploits the structure of the optimal downlink beamforming to design an effective hybrid learning strategy with the aim to maximize the sum rate performance. This is achieved by jointly considering the learning performance of the downlink channel, the power and the sum rate in the training stage. The proposed approach applies to generic cases in which the uplink channel information is available, but its relation to the downlink channel is unknown and does not require an explicit downlink channel estimation. We further extend the developed technique to massive multiple-input multiple-output scenarios and achieve a distributed learning strategy for multicell systems without an inter-cell signalling overhead. Simulation results verify that our proposed method provides the performance close to the state of the art numerical algorithms with perfect downlink channel information and significantly outperforms existing data-driven methods in terms of the sum rate.

cs.IT↗

arXiv2021

Simultaneous Wireless Information and Power Transfer for Federated Learning

In the Internet of Things, learning is one of most prominent tasks. In this paper, we consider an Internet of Things scenario where federated learning is used with simultaneous transmission of model data and wireless power. We investigate the trade-off between the number of communication rounds and communication round time while harvesting energy to compensate the energy expenditure. We formulate and solve an optimization problem by considering the number of local iterations on devices, the time to transmit-receive the model updates, and to harvest sufficient energy. Numerical results indicate that maximum ratio transmission and zero-forcing beamforming for the optimization of the local iterations on devices substantially boost the test accuracy of the learning task. Moreover, maximum ratio transmission instead of zero-forcing provides the best test accuracy and communication round time trade-off for various energy harvesting percentages. Thus, it is possible to learn a model quickly with few communication rounds without depleting the battery.

eess.SP↗

arXiv2021

SWIPT with Intelligent Reflecting Surfaces under Spatial Correlation

Intelligent reflecting surfaces (IRSs) can be beneficial to both information and energy transfer, due to the gains achieved by their multiple elements. In this work, we deal with the impact of spatial correlation between the IRS elements, in the context of simultaneous wireless information and power transfer. The performance is evaluated in terms of the average harvested energy and the outage probability for random and equal phase shifts. Closed-form analytical expressions for both metrics under spatial correlation are derived. Moreover, the optimal case is considered when the elements are uncorrelated and fully correlated. In the uncorrelated case, random and equal phase shifts provide the same performance. However, the performance of correlated elements attains significant gains when there are equal phase shifts. Finally, we show that correlation is always beneficial to energy transfer, whereas it is a degrading factor for information transfer under random and optimal configurations.

cs.IT↗

arXiv2021

Differential Chaos Shift Keying-based Wireless Power Transfer with Nonlinearities

In this paper, we investigate conventional communication-based chaotic waveforms in the context of wireless power transfer (WPT). Particularly, we present a differential chaos shift keying (DCSK)-based WPT architecture, that employs an analog correlator at the receiver, in order to boost the energy harvesting (EH) performance. We take into account the nonlinearities of the EH process and derive closed-form analytical expressions for the harvested direct current (DC) under a generalized Nakagami-m block fading model. We show that, in this framework, both the peak-to-average-power-ratio of the received signal and the harvested DC, depend on the parameters of the transmitted waveform. Furthermore, we investigate the case of deterministic unmodulated chaotic waveforms and demonstrate that, in the absence of a correlator, modulation does not affect the achieved harvested DC. On the other hand, it is shown that for scenarios with a correlator-aided receiver, DCSK significantly outperforms the unmodulated case. Based on this observation, we propose a novel DCSK-based signal design, which further enhances the WPT capability of the proposed architecture; corresponding analytical expressions for the harvested DC are also derived. Our results demonstrate that the proposed architecture and the associated signal design, can achieve significant EH gains in DCSK-based WPT systems. Furthermore, we also show that, even by taking into account the nonlinearities at the transmitter amplifier, the proposed chaotic waveform performs significantly better in terms of EH, when compared with the existing multisine signals.

eess.SP↗

arXiv2021

A Survey on Reinforcement Learning-Aided Caching in Mobile Edge Networks

Mobile networks are experiencing tremendous increase in data volume and user density. An efficient technique to alleviate this issue is to bring the data closer to the users by exploiting the caches of edge network nodes, such as fixed or mobile access points and even user devices. Meanwhile, the fusion of machine learning and wireless networks offers a viable way for network optimization as opposed to traditional optimization approaches which incur high complexity, or fail to provide optimal solutions. Among the various machine learning categories, reinforcement learning operates in an online and autonomous manner without relying on large sets of historical data for training. In this survey, reinforcement learning-aided mobile edge caching is presented, aiming at highlighting the achieved network gains over conventional caching approaches. Taking into account the heterogeneity of sixth generation (6G) networks in various wireless settings, such as fixed, vehicular and flying networks, learning-aided edge caching is presented, departing from traditional architectures. Furthermore, a categorization according to the desirable performance metric, such as spectral, energy and caching efficiency, average delay, and backhaul and fronthaul offloading is provided. Finally, several open issues are discussed, targeting to stimulate further interest in this important research field.

cs.NI↗

arXiv2021

Generalized Selection in Wireless Powered Networks with Non-Linear Energy Harvesting

The rapid growth of the so-called Internet of Things is expected to significantly expand and support the deployment of resource-limited devices. Therefore, intelligent scheduling protocols and technologies such as wireless power transfer, are important for the efficient implementation of these massive low-powered networks. This paper studies the performance of a wireless powered communication network, where multiple batteryless devices harvest radio-frequency from a dedicated transmitter in order to communicate with a common information receiver (IR). We investigate several novel selection schemes, corresponding to different channel state information requirements and implementation complexities. In particular, each scheme schedules the $k$-th best device based on: a) the end-to-end (e2e) signal-to-noise ratio (SNR), b) the energy harvested at the devices, c) the uplink transmission to the IR, and d) the conventional/legacy max-min selection policy. We consider a non-linear energy harvesting (EH) model and derive analytical expressions for the outage probability of each selection scheme by using tools from high order statistics. %Our results show that, the performance of all the proposed schemes converges to an error floor due to the saturation effects of the considered EH model. Moreover, an asymptotic scenario in terms of the number of devices is considered and, by applying extreme value theory, the system's performance is evaluated. We derive a complete analytical framework that provides useful insights for the design and realization of such networks.

cs.IT↗

arXiv2021

FD-JCAS Techniques for mmWave HetNets: Ginibre Point Process Modeling and Analysis

In this paper, we study the co-design of full-duplex (FD) radio with joint communication and radar sensing (JCAS) techniques in millimeter-wave (mmWave) heterogeneous networks (HetNets). Spectral co-existence of radar and communication systems causes mutual interference between the two systems, compromising both the data exchange and sensing capabilities. Focusing on the detection performance, we propose a cooperative detection technique, which exploits the sensing information from multiple base stations (BSs), aiming at enhancing the probability of successfully detecting an object. Three combining rules are considered, namely the \textit{OR}, the \textit{Majority} and the \textit{AND} rule. In real-world network scenarios, the locations of the BSs are spatially correlated, exhibiting a repulsive behavior. Therefore, we model the spatial distribution of the BSs as a $β$-Ginibre point process ($β$-GPP), which can characterize the repulsion among the BSs. By using stochastic geometry tools, analytical expressions for the detection performance of $β$-GPP-based FD-JCAS systems are expressed for each of the considered combining rule. Furthermore, by considering temporal interference correlation, we evaluate the probability of successfully detecting an object over two different time slots. Our results demonstrate that our proposed technique can significantly improve the detection performance when compared to the conventional non-cooperative technique.

cs.IT↗

arXiv2021

Low-Complexity Random Rotation-based Schemes for Intelligent Reflecting Surfaces

The employment of intelligent reflecting surfaces (IRSs) is a potential and promising solution to increase the spectral and energy efficiency of wireless communication networks. Despite their many advantages, IRS-aided communications have limitations as they are subject to high propagation losses. To overcome this, the phase rotation (shift) at each element needs to be designed in such a way as to increase the channel gain at the destination. However, this increases the system's complexity as well as its power consumption. In this paper, we present an analytical framework for the performance of random rotation-based IRS-aided communications. Under this framework, we propose four low-complexity and energy efficient schemes, based on a coding or a selection approach. Both of these approaches employ random phase rotations and require limited knowledge of channel state information. Specifically, the coding-based schemes use time-varying random phase rotations to produce an equivalent time-varying channel. On the other hand, the selection-based schemes select a partition of the IRS elements based on the received signal power at the destination. Analytical expressions for the achieved outage probability and energy efficiency of each scheme are derived. It is demonstrated that all schemes can provide significant performance gains as well as full diversity order.

cs.IT↗

arXiv2021

Differential chaos shift keying-based wireless power transfer

In this work, we investigate differential chaos shift keying (DCSK), a communication-based waveform, in the context of wireless power transfer (WPT). Particularly, we present a DCSK-based WPT architecture, that employs an analog correlator at the receiver in order to boost the energy harvesting (EH) performance. By taking into account the nonlinearities of the EH process, we derive closed-form analytical expressions for the peak-to-average-power-ratio of the received signal as well as the harvested power. Nontrivial design insights are provided, where it is shown how the parameters of the transmitted waveform affects the EH performance. Furthermore, it is demonstrated that the employment of a correlator at the receiver achieves significant EH gains in DCSK-based WPT systems.

eess.SP↗