arXiv subjects

Ippei Nakamura

Publications and source records attributed to Ippei Nakamura.

10 recordsLinked to original sources

arXiv2026

Cryogenic Time-Division-Multiplexed Voltage Control for Scalable Trapped-Ion Quantum Processors

Trapped-ion quantum computers based on the quantum charge-coupled device architecture require on the order of ten trap electrodes per qubit, making the number of vacuum feedthroughs a bottleneck at the system scale. Time-division multiplexed (TDM)-based voltage control for trap electrodes provides a natural route to alleviate this constraint. However, previous studies have been limited to architectural proposals for static trap-potential compensation and room-temperature demonstrations of dynamic-electrode control, leaving cryogenic operation of TDM-based voltage control for static and dynamic electrodes experimentally unexplored. In this study, we develop and cryogenically validate TDM-based voltage control schemes for two distinct electrode classes. For static electrodes used in trap-potential compensation, we implement a 32-channel demultiplexed system operating at approximately 27~K, achieving an effective voltage update rate of 37.5~kHz with an output range of $\pm10~\mathrm{V}$ per channel. For dynamic electrodes used in ion operations, such as shuttling, we implement a four-channel demultiplexed system operating at approximately 14~K, achieving an effective voltage update rate of 1~MHz with a comparable output range. These results establish TDM-based voltage control as a practical approach for both electrode classes, providing a path for mitigating the vacuum feedthrough bottleneck in scalable trapped-ion quantum processors.

quant-ph↗

arXiv2025

High-$Q$ membrane resonators using ultra-high-stress crystalline TiN films

High-quality-factor ($Q$) mechanical resonators are essential components for precise sensing and control of mechanical motion at a quantum level. While amorphous materials such as SiN have been widely used in high-$Q$ mechanical resonators utilizing stress-induced dissipation dilution, crystalline materials have emerging potential to achieve higher quality factors by combining low intrinsic loss and high tensile stress. In this paper, we demonstrate high-Q membrane resonators using ultra-high-stress crystalline TiN. Our membrane resonator exhibits a tensile stress exceeding 2.3 GPa and a quality factor of $Q = 8.0 \times 10^6$ at 2.2 K. By estimating the dilution factor, we infer that our TiN resonator has a intrinsic quality factor comparable to that of SiN membrane resonators. With its ultra-high stress and crystalline properties, our TiN films can serve as a powerful tool for opto- and electromechanical systems, offering highly dissipation-diluted mechanical resonators.

cond-mat.mes-hall↗

arXiv2025

Trapping an Atomic Ion using Time-Division Multiplexed Digital-to-Analog Converters

Independent control of numerous electrodes in quantum charge-coupled device architectures presents a significant challenge for wiring and hardware scalability. To address this issue, we demonstrate a voltage control method based on time-division multiplexing (TDM). This approach utilizes a single high-update-rate digital-to-analog converter (DAC) to sequentially generate control signals for multiple electrodes, thereby reducing both the number of required DACs and associated wiring. We experimentally validate this concept by developing a 10-channel system that operates with only two DACs. The developed TDM-based voltage control system is applied to a surface-electrode trap, where we successfully trap a single $^{40}\mathrm{Ca}^+$ ion and demonstrate a simple ion transport primitive. This approach offers a resource-efficient and scalable solution for advanced quantum computing systems based on trapped ions.

quant-ph↗

arXiv2025

Multiplexed Control at Scale for Electrode Arrays in Trapped-Ion Quantum Processors

The scaling up of trapped-ion quantum processors based on the quantum charge-coupled device (QCCD) architecture is difficult owing to the extensive electronics and high-density wiring required to control numerous trap electrodes. In conventional QCCD architectures, each trap electrode is controlled via a dedicated digital-to-analog converter (DAC). The conventional approach places an overwhelming demand on electronic resources and wiring complexity. This is because the number of trap electrodes typically exceeds the number of trapped-ion qubits. This study proposes a method that leverages a high-speed DAC to generate time-division multiplexed signals to control a large-scale QCCD trapped-ion quantum processor. The proposed method replaces conventional DACs with a single high-speed DAC that generates the complete voltage waveforms required to control the trap electrodes, thereby significantly reducing the wiring complexity and overall resource requirements. Based on realistic parameters and commercially available electronics, our analysis demonstrates that a QCCD trapped-ion quantum computer with 10,000 trap electrodes can be controlled using only 13 field-programmable gate arrays and 104 high-speed DACs. This is in stark contrast to the 10,000 dedicated DACs required by conventional control methods. Consequently, employing this approach, we developed a proof-of-concept electronic system and evaluated its analog output performance.

quant-ph↗

arXiv2024

Superconducting surface trap chips for microwave-driven trapped ions

Microwave-driven trapped ion logic gates offer a promising avenue for advancing beyond laser-based logic operations. In future microwave-based operations, however, the joule heat produced by large microwave currents flowing through narrow microwave electrodes would potentially hinder improvements in gate speed and fidelity. Moreover, scalability, particularly in cryogenic trapped ion systems, is impeded by the excessive joule heat. To address these challenges, we present a novel approach: superconducting surface trap chips that integrate high-$Q$ microwave resonators with large current capacities. Utilizing sub-ampere microwave currents in superconducting Nb resonators, we generate substantial magnetic field gradients with significantly reduced losses compared to conventional metal chips. By harnessing the high $Q$ factors of superconducting resonators, we propose a power-efficient two-qubit gate scheme capable of achieving a sub-milliwatt external microwave input power at a gate Rabi frequency of 1 kHz.

quant-ph↗

arXiv2023

Compact atom source using fiber-based pulsed laser ablation

We designed, demonstrated, and characterized an atom source based on fiber-based pulsed laser ablation. By using commercially available miniature lens system for focusing nanosecond pulsed laser of up to 225~$μ$J delivered through a multimode fiber of 105~$μ$m core, we successfully ablate a SrTiO$_3$ target and generate a jet of neutral strontium atoms, though our method can be applied to other transparent ablation targets containing materials under concern. Our device endures 6\,000 cycles of pulse delivery and irradiation without noticeable damage on the fiber facets and lenses. The generated strontium beam is characterized with spectroscopic method and is revealed to exhibit the transverse temperature of 800~K and longitudinal velocity of 2\,300~m/s, which are typical of pulsed-laser-ablation-based atom source. The number of atoms generated by a single ablation pulse is estimated to be $2\times 10^5$. Our device provides a compact, cryo-compatible fiber-pigtailed atom source with minimized device footprints and reduced complexity of vacuum systems to further promote the developments of cold-atom experiments. It may also find interesting applications in atomic and molecular sciences.

physics.atom-ph↗

arXiv2021

Coupling of a quantum memory and telecommunication wavelength photons for high-rate entanglement distribution in quantum repeaters

Quantum repeaters are indispensable tools for long-distance quantum communication. However, frequency matching between entangled photon sources and remote quantum memories (QMs) is difficult, which is an obstacle to the implementation of quantum repeaters. In this paper, we demonstrate a method to achieve the coupling of a Pr:YSO as a fixed-time QM with a single telecommunication-wavelength photon through frequency stabilization using an optical frequency comb over all applied laser wavelengths. The demonstrated method can lead to the implementation of a quantum repeater scheme enabling an improvement of the entanglement generation rate, paving the way for long-distance quantum communication.

quant-ph↗

arXiv2020

Two-photon comb with wavelength conversion and 20-km distribution for quantum communication

Quantum computing and quantum communication, have been greatly developed in recent years and expected to contribute to quantum internet technologies, including cloud quantum computing and unconditionally secure communication. However, long-distance quantum communication is challenging mainly because of optical fiber losses; quantum repeaters are indispensable for fiber-based transmission because unknown quantum states cannot be amplified with certainty. In this study, we demonstrate a versatile entanglement source in the telecom band for fiber-based quantum internet, which has a narrow linewidth of sub-MHz range, entanglement fidelity of more than 95%, and Bell-state generation even with frequency multimode. Furthermore, after a total distribution length of 20-km in fiber, two-photon correlation is observed with an easily identifiable normalized correlation coefficient, despite the limited bandwidth of the wavelength converter. The presented implementation promises an efficient method for entanglement distribution that is compatible with quantum memory and frequency-multiplexed long-distance quantum communication applications.

quant-ph↗

arXiv2020

Single-site-resolved imaging of ultracold atoms in a triangular optical lattice

We demonstrate single-site-resolved fluorescence imaging of ultracold $^{87}\mathrm{Rb}$ atoms in a triangular optical lattice by employing Raman sideband cooling. Combining a Raman transition at the D1 line and a photon scattering through an optical pumping of the D2 line, we obtain images with low background noise. The Bayesian optimisation of 11 experimental parameters for fluorescence imaging with Raman sideband cooling enables us to achieve single-atom detection with a high fidelity of $(96.3 \pm 1.3)$%. Single-atom and single-site resolved detection in a triangular optical lattice paves the way for the direct observation of spin correlations or entanglement in geometrically frustrated systems.

cond-mat.quant-gas↗

arXiv2018

Optimization temperature sensitivity using the optically detected magnetic resonance spectrum of a nitrogen-vacancy center ensemble

Temperature sensing with nitrogen vacancy (NV) centers using quantum techniques is very promising and further development is expected. Recently, the optically detected magnetic resonance (ODMR) spectrum of a high-density ensemble of the NV centers was reproduced with noise parameters [inhomogeneous magnetic field, inhomogeneous strain (electric field) distribution, and homogeneous broadening] of the NV center ensemble. In this study, we use ODMR to estimate the noise parameters of the NV centers in several diamonds. These parameters strongly depend on the spin concentration. This knowledge is then applied to theoretically predict the temperature sensitivity. Using the diffraction-limited volume of 0.1 micron^3, which is the typical limit in confocal microscopy, the optimal sensitivity is estimated to be around 0.76 mK/Hz^(1/2) with an NV center concentration of 5.0e10^17/cm^3. This sensitivity is much higher than previously reported sensitivities, demonstrating the excellent potential of temperature sensing with NV centers.

quant-ph↗