arXiv subjects

Irene Aguilera

Publications and source records attributed to Irene Aguilera.

12 recordsLinked to original sources

arXiv2024

Roadmap on Quantum Magnetic Materials

Fundamental research on two-dimensional (2D) magnetic systems based on van der Waals materials has been gaining traction rapidly since their recent discovery. With the increase of recent knowledge, it has become clear that such materials have also a strong potential for applications in devices that combine magnetism with electronics, optics, and nanomechanics. Nonetheless, many challenges still lay ahead. Several fundamental aspects of 2D magnetic materials are still unknown or poorly understood, such as their often-complicated electronic structure, optical properties, and magnetization dynamics, and their magnon spectrum. To elucidate their properties and facilitate integration in devices, advanced characterization techniques and theoretical frameworks need to be developed or adapted. Moreover, developing synthesis methods which increase critical temperatures and achieve large-scale, high-quality homogeneous thin films is crucial before these materials can be used for real-world applications. Therefore, the field of 2D magnetic materials provides many challenges and opportunities for the discovery and exploration of new phenomena, as well as the development of new applications. This Roadmap presents the background, challenges, and potential research directions for various relevant topics in the field on the fundamentals, synthesis, characterization, and applications. We hope that this work can provide a strong starting point for young researchers in the field and provide a general overview of the key challenges for more experienced researchers.

cond-mat.mtrl-sci↗

arXiv2024

Probing the Electronic Structure at the Boundary of Topological Insulators in the $\mathrm{Bi}_2\mathrm{Se}_3$ Family by Combined STM and AFM

We develop a numerical scheme for the calculation of tunneling current $I$ and differential conductance $\mathsf{d}I/\mathsf{d}V$ of metal and CO-terminated STM tips on the topological insulators $\mathrm{Bi}_2\mathrm{Se}_3$, $\mathrm{Bi}_2\mathrm{Te}_2\mathrm{Se}$ and $\mathrm{Bi}_2\mathrm{Te}_3$ and find excellent agreement with experiment. The calculation is an application of Chen's derivative rule, whereby the Bloch functions are obtained from Wannier interpolated tight-binding Hamiltonians and maximally localized Wannier functions from first-principle DFT+$GW$ calculations. We observe signatures of the topological boundary modes, their hybridization with bulk bands, Van Hove singularities of the bulk bands and characterize the orbital character of these electronic modes using the high spatial resolution of STM and AFM. Bare DFT calculations are insufficient to explain the experimental data, which are instead accurately reproduced by many-body corrected $GW$ calculations.

cond-mat.mes-hall↗

arXiv2022

Is there a polaron signature in angle-resolved photoemission of CsPbBr3?

The formation of large polarons has been proposed as reason for the high defect tolerance, low mobility, low charge carrier trapping and low nonradiative recombination rates of lead halide perovskites. Recently, direct evidence for large-polaron formation has been reported from a 50% effective mass enhancement in angle-resolved photoemission of CsPbBr3 over theory for the orthorhombic structure. We present in-depth band dispersion measurements of CsPbBr3 and GW calculations which lead to almost identical effective masses at the valence band maximum of 0.203+/-0.016 m0 in experiment and 0.226 m0 in orthorhombic theory. We argue that the effective mass can be explained solely on the basis of electron-electron correlation and large-polaron formation cannot be concluded from photoemission data.

cond-mat.mtrl-sci↗

arXiv2022

Bulk and surface electronic structure of Bi$_4$Te$_3$ from $GW$ calculations and photoemission experiments

We present a combined theoretical and experimental study of the electronic structure of stoichiometric Bi$_4$Te$_3$, a natural superlattice of alternating Bi$_2$Te$_3$ quintuple layers and Bi bilayers. In contrast to the related semiconducting compounds Bi$_2$Te$_3$ and Bi$_1$Te$_1$, density functional theory predicts Bi$_4$Te$_3$ to be a semimetal. In this work, we compute the quasiparticle electronic structure of Bi$_4$Te$_3$ in the framework of the $GW$ approximation within many-body perturbation theory. The quasiparticle corrections are found to modify the dispersion of the valence and conduction bands in the vicinity of the Fermi energy, leading to the opening of a small indirect band gap. Based on the analysis of the eigenstates, Bi$_4$Te$_3$ is classified as a dual topological insulator with bulk topological invariants $\mathbb{Z}_2$ (1;111) and magnetic mirror Chern number $n_M=1$. The bulk $GW$ results are used to build a Wannier-functions based tight-binding Hamiltonian that is further applied to study the electronic properties of the (111) surface. The comparison with our angle-resolved photoemission measurements shows excellent agreement between the computed and measured surface states and indicates the dual topological nature of Bi$_4$Te$_3$.

cond-mat.mtrl-sci↗

arXiv2021

Orbital contributions in the element-resolved valence electronic structure of Bi2Se3

In this work, we studied the bulk band structure of a topological insulator (TI) Bi2Se3 and determined the contributions of the Bi and Se orbital states to the valence bands using standing wave-excited hard x-ray photoemission spectroscopy (SW-HAXPES). This SW technique can provide the element-resolved information and extract individual Bi and Se contributions to the Bi2Se3 valence band. Comparisons with density functional theory (DFT) calculations (LDA and GW) reveal that the Bi 6s, Bi 6p, and Se 4p states are dominant in the Bi2Se3 HAXPES valence band. These findings pave a way for studying the element-resolved band structure and orbital contributions of this class of TIs.

cond-mat.mtrl-sci↗

arXiv2021

Effect of doping, photodoping and bandgap variation on the performance of perovskite solar cells

Most traditional semiconductor materials are based on the control of doping densities to create junctions and thereby functional and efficient electronic and optoelectronic devices. The technology development for halide perovskites had initially only rarely made use of the concept of electronic doping of the perovskite layer and instead employed a variety of different contact materials to create functionality. Only recently, intentional, or unintentional doping of the perovskite layer is more frequently invoked as an important factor explaining differences in photovoltaic or optoelectronic performance in certain devices. Here we use numerical simulations to study the influence of doping and photodoping on photoluminescence quantum yield as well as other device relevant metrics. We find that doping can improve the photoluminescence quantum yield by making radiative recombination faster. This effect can benefit or harm photovoltaic performance given that the improvement of photoluminescence quantum efficiency and open-circuit voltage is accompanied by a reduction of the diffusion length. This reduction will eventually lead to inefficient carrier collection at high doping densities. The photovoltaic performance might improve at an optimum doping density which depends on a range of factors such as the mobilities of the different layers and the ratio of the capture cross sections for electrons and holes.

cond-mat.mtrl-sci↗

arXiv2021

$Z_2$ topology of bismuth

While first-principles calculations with different levels of sophistication predict a topologically trivial $Z_2$ state for bulk bismuth, some photoemission experiments show surface states consistent with the interpretation of bismuth being in a topologically non-trivial $Z_2$ state. We resolve this contradiction between theory and experiment by showing, based on quasiparticle self-consistent $GW$ calculations, that the experimental surface states interpreted as supporting a non-trivial phase are actually consistent with a trivial $Z_2$ invariant. We identify this contradiction as the result of a crosstalk effect arising from the extreme penetration depth of the surface states into the bulk of Bi. A film of Bi can be considered bulk-like only for thicknesses of about 1000 bilayers ($\approx$ 400 nm) and more.

cond-mat.mtrl-sci↗

arXiv2020

Defect tolerant device geometries

The term defect tolerance is widely used in literature to describe materials such as lead-halides which exhibit long non-radiative lifetimes of carriers despite possessing a large concentration of point defects. Studies on defect tolerance of materials mostly look at the properties of the host material and/or the chemical nature of defects that affect the capture coefficients of defects. However, the recombination activity of a defect is not only a function of its capture coefficients alone but are also dependent on the electrostatics and the design of the layer stack of a photovoltaic device. Here we study the influence of device geometry on defect tolerance by combining calculations of capture coefficients with device simulations. We derive generic device design principles which can inhibit recombination inside a photovoltaic device for a given set of capture coefficients based on the idea of slowing down the slower of the two processes (electron and hole capture) even further by modifying electron and hole injection into the absorber layer. We use the material parameters and typical p-i-n device geometry representing methylammonium lead halide perovskites solar cells to illustrate the application of our generic design principles to improve specific devices .

cond-mat.mtrl-sci↗

arXiv2017

Direct observation of the band gap transition in atomically thin ReS$_2$

ReS$_2$ is considered as a promising candidate for novel electronic and sensor applications. The low crystal symmetry of the van der Waals compound ReS$_2$ leads to a highly anisotropic optical, vibrational, and transport behavior. However, the details of the electronic band structure of this fascinating material are still largely unexplored. We present a momentum-resolved study of the electronic structure of monolayer, bilayer, and bulk ReS$_2$ using k-space photoemission microscopy in combination with first-principles calculations. We demonstrate that the valence electrons in bulk ReS$_2$ are - contrary to assumptions in recent literature - significantly delocalized across the van der Waals gap. Furthermore, we directly observe the evolution of the valence band dispersion as a function of the number of layers, revealing a significantly increased effective electron mass in single-layer crystals. We also find that only bilayer ReS$_2$ has a direct band gap. Our results establish bilayer ReS$_2$ as a advantageous building block for two-dimensional devices and van der Waals heterostructures.

cond-mat.mtrl-sci↗

arXiv2015

Quasi 2D electronic states with high spin-polarization in centrosymmetric MoS$_2$ bulk crystals

Time reversal dictates that nonmagnetic, centrosymmetric crystals cannot be spin-polarized as a whole. However, it has been recently shown that the electronic structure in these crystals can in fact show regions of high spin-polarization, as long as it is probed locally in real and in reciprocal space. In this article we present the first observation of this type of compensated polarization in MoS$_2$ bulk crystals. Using spin- and angle-resolved photoemission spectroscopy (ARPES) we directly observed a spin-polarization of more than 65% for distinct valleys in the electronic band structure. By additionally evaluating the probing depth of our method we find that these valence band states at the $\overline{\text{K}}$ point in the Brillouin zone are close to fully polarized for the individual atomic trilayers of MoS$_2$, which is confirmed by our density functional theory calculations. Furthermore, we show that this spin-layer locking leads to the observation of highly spin-polarized bands in ARPES since these states are almost completely confined within two dimensions. Our findings prove that these highly desired properties of MoS$_2$ can be accessed without thinning it down to the monolayer limit.

cond-mat.mtrl-sci↗

arXiv2015

Electronic phase transitions of bismuth under strain from relativistic self-consistent GW calculations

We present quasiparticle self-consistent GW (QSGW) calculations of semimetallic bulk Bi. We go beyond the conventional QSGW method by including the spin-orbit coupling throughout the self-consistency cycle. This approach improves the description of the electron and the hole pockets considerably with respect to standard density functional theory (DFT), leading to excellent agreement with experiment. We employ this relativistic QSGW approach to conduct a study of the semimetal-to-semiconductor and the trivial-to-topological transitions that Bi experiences under strain. DFT predicts that an unphysically large strain is needed for such transitions. We show, by means of the relativistic QSGW description of the electronic structure, that an in-plane tensile strain of only 0.3% and a compressive strain of 0.4% are sufficient to cause the semimetal-to-semiconductor and the trivial-to-topological phase transitions, respectively. Thus, the required strain moves into a regime that is likely to be realizable in experiment, which opens up the possibility to explore bulklike topological behavior of pure Bi.

cond-mat.mtrl-sci↗

arXiv2014

Bulk Band Structure of Bi$_2$Te$_3$

The bulk band structure of Bi$_2$Te$_3$ has been determined by angle-resolved photoemission spectroscopy and compared to first-principles calculations. We have performed calculations using the local density approximation (LDA) of density functional theory and the one-shot $GW$ approximation within the all-electron full-potential linearized augmented-plane-wave (FLAPW) formalism, fully taking into account spin-orbit coupling. Quasiparticle effects produce significant changes in the band structure of \bite~when compared to LDA. Experimental and calculated results are compared in the spectral regions where distinct differences between the LDA and $GW$ results are present. Overall a superior agreement with $GW$ is found, highlighting the importance of many-body effects in the band structure of this family of topological insulators.

cond-mat.mtrl-sci↗