arXiv subjects

Isabelle Tallon-Bosc

Publications and source records attributed to Isabelle Tallon-Bosc.

7 recordsLinked to original sources

arXiv2026

Self-calibration of adaptive optics systems. Application to the THEMIS solar telescope

The interaction matrix models the effects of deformable mirror (DM) commands as perceived by the wavefront sensor (WFS) and is the cornerstone of the Adaptive Optics (AO) control. Difficulties to calibrate this matrix arise due to the number of degrees of freedom, the non-linearity, and temporal evolution of the AO system. An affine approximation of the unknown mapping between the DM commands and the WFS measurements is considered. Optimal estimators of the parameters of this affine model are obtained by fitting, in the weighted least squares sense, WFS data acquired with random probe commands sent to the DM. Several calibration methods are being considered depending on whether the model is directly fit to the WFS data or to the differences between successive WFS data. We derive closed-form expressions of the estimators of the components of the model. The proposed calibration methods can be applied under different conditions: before observing, on an internal source, or on-sky in open- or closed-loop. By introducing forgetting factors to reduce the weight of data as they age, we show that the model can be learned continuously using simple recurrence rules. The low computational complexity of these rules makes them suitable for real-time at the same frequency as the AO loop. We derive simple expressions for the mean squared errors (MSE) of the proposed estimators. We apply the proposed calibration methods to real telemetry data from the AO system of the THEMIS solar telescope. Our results show that the simple differences method is the method of choice: not only does it produce estimators with the least MSE, but it is also very simple to implement compared to the push-pull method which is widely used in AO systems.

astro-ph.IM↗

arXiv2024

Upgrading SPHERE with the second stage AO system SAXO+: non-common path aberrations estimation and correction

SAXO+ is a planned enhancement of the existing SAXO, the VLT/ SPHERE adaptive optics system, deployed on ESO's Very Large Telescope. This upgrade is designed to significantly enhance the instrument's capacity to detect and analyze young Jupiter-like planets. The pivotal addition in SAXO+ is a second-stage adaptive optics system featuring a dedicated near-infrared pyramid wavefront sensor and a second deformable mirror. This secondary stage is strategically integrated to address any residual wavefront errors persisting after the initial correction performed by the current primary AO loop, SAXO. However, several recent studies clearly showed that in good conditions, even in the current system SAXO, non-common path aberrations (NCPAs) are the limiting factor of the final normalized intensity in focal plane, which is the final metric for ground-based high-contrast instruments. This is likely to be even more so the case with the new AO system, with which the AO residuals will be minimized. Several techniques have already been extensively tested on SPHERE in internal source and/or on-sky and will be presented in this paper. However, the use of a new type of sensor for the second stage, a pyramid wavefront sensor, will likely complicate the correction of these aberrations. Using an end-to-end AO simulation tool, we conducted simulations to gauge the effect of measured SPHERE NCPAs in the coronagraphic image on the second loop system and their correction using focal plane wavefront sensing systems. We finally analyzed how the chosen position of SAXO+ in the beam will impact the evolution of the NCPAs in the new instrument.

astro-ph.IM↗

arXiv2023

Closing the loop as an inverse problem: the real-time control of THEMIS adaptive optics

We have taken advantage of the implementation of an adaptive optics system on the Themis solar telescope to implement innovative strategies based on an inverse problem formulation for the control loop. Such an approach encompassing the whole system implies the estimation of the pixel variances of the Shack-Hartmann wavefront sensor, a novel real-time method to extract the wavefront slopes as well as their associated noise covariance, and the computation of pseudo-open loop data. The optimal commands are computed by iteratively solving a regularized inverse problem with spatio-temporal constraints including Kolmogorov statistics. The latency of the dedicated real-time control software with conventional CPU is shorter than 300 $μ$s from the acquisition of the raw 400 x 400 pixel wavefront sensor image to the sending of the commands.

astro-ph.IM↗

arXiv2019

From the stellar properties of HD219134 to the internal compositions of its transiting exoplanets

The harvest of exoplanet discoveries has opened the area of exoplanet characterisation. But this cannot be achieved without a careful analysis of the host star parameters. The system of HD219134 hosts two transiting exoplanets and at least two additional non-transiting exoplanets. We used the VEGA/CHARA interferometer to measure the angular diameter of HD219134, leading to a stellar radius of $R_{\star}=0.726\pm0.014 R_{\odot}$. We also derived the stellar density from the transits light curves ($ρ_{\star}=1.82\pm0.19 ρ_{\odot}$), which finally gives a direct estimate of the mass ($M_{\star}=0.696\pm0.078 M_{\odot}$) with a correlation of 0.46 between $R_{\star}$ and $M_{\star}$. This new mass is smaller than that derived from the C2kSMO stellar evolutionary model, which provides a mass range of 0.755$-$0.810 ($\pm 0.040$) $M_{\odot}$. This allows us to infer the mass, radius and density of the two transiting exoplanets of the system. We then use an inference model to obtain the internal parameters of these two transiting exoplanets. Moreover, we find that planet $b$ and $c$ have smaller radii than previously estimated ($1.500\pm0.057$ and $1.415\pm0.049 R_{\oplus}$, respectively); this clearly puts these planets out of the gap in the exoplanetary radii distribution and validates their super-Earth nature. Planet $b$ is more massive than planet $c$, but possibly less dense. We investigate whether this could be caused by partial melting of the mantle and find that tidal heating due to non-zero eccentricity of planet $b$ may be powerful enough. The system of HD219134 constitutes a very valuable benchmark for both stellar physics and exoplanetary science. The direct determination of the stellar density, radius and mass should be more extensively applied to provide accurate exoplanets properties and calibrate stellar models.

astro-ph.EP↗

arXiv2017

Science cases for a visible interferometer

High spatial resolution is the key for the understanding various astrophysical phenomena. But even with the future E-ELT, single dish instruments are limited to a spatial resolution of about 4 mas in the visible. For the closest objects within our Galaxy most of the stellar photosphere remains smaller than 1 mas. With the success of long baseline interferometry these limitations were soom overcome. Today low and high resolution interferometric instruments on the VLTI and CHARA offer an immense range of astrophysical studies. Combining more telescopes and moving to visible wavelengths broadens the science cases even more. With the idea of developing strong science cases for a future visible interferometer, we organized a science group around the following topics: pre-main sequence and main sequence stars, fundamental parameters, asteroseismology and classical pulsating stars, evolved stars, massive stars, active galactic nuclei (AGNs) and imaging techniques. A meeting was organized on the 15th and 16th of January, 2015 in Nice with the support of the Action Specific in Haute Resolution Angulaire (ASHRA), the Programme National en Physique Stellaire (PNPS), the Lagrange Laboratory and the Observatoire de la Cote d'Azur, in order to present these cases and to discuss them further for future visible interferometers. This White Paper presents the outcome of the exchanges. This book is dedicated to the memory of our colleague Olivier Chesneau who passed away at the age of 41.

astro-ph.SR↗

arXiv2016

Radii, masses, and ages of 18 bright stars using interferometry and new estimations of exoplanetary parameters

Accurate stellar parameters are needed in numerous domains of astrophysics. The position of stars on the H-R diagram is an important indication of their structure and evolution, and it helps improve stellar models. Furthermore, the age and mass of stars hosting planets are required elements for studying exoplanetary systems. We aim at determining accurate parameters of a set of 18 bright exoplanet host and potential host stars from interferometric measurements, photometry, and stellar models. Using the VEGA/CHARA interferometer, we measured the angular diameters of 18 stars, ten of which host exoplanets. We combined them with their distances to estimate their radii. We used photometry to derive their bolometric flux and, then, their effective temperature and luminosity to place them on the H-R diagram. We then used the PARSEC models to derive their best fit ages and masses, with error bars derived from MC calculations. Our interferometric measurements lead to an average of 1.9% uncertainty on angular diameters and 3% on stellar radii. There is good agreement between measured and indirect estimations of angular diameters (from SED fitting or SB relations) for MS stars, but not as good for more evolved stars. For each star, we provide a likelihood map in the mass-age plane; typically, two distinct sets of solutions appear (an old and a young age). The errors on the ages and masses that we provide account for the metallicity uncertainties, which are often neglected by other works. From measurements of its radius and density, we also provide the mass of 55 Cnc independently of models. From the stellar masses, we provide new estimates of semi-major axes and minimum masses of exoplanets with reliable uncertainties. We also derive the radius, density, and mass of 55 Cnc e, a super-Earth that transits its stellar host. Our exoplanetary parameters reflect the known population of exoplanets.

astro-ph.SR↗

arXiv2009

Study of the atmospheric refraction in a single mode instrument - Application to AMBER/VLTI

This paper presents a study of the atmospheric refraction and its effect on the light coupling efficiency in an instrument using single-mode optical fibers. We show the analytical approach which allowed us to assess the need to correct the refraction in J- and H-bands while observing with an 8-m Unit Telescope. We then developed numerical simulations to go further in calculations. The hypotheses on the instrumental characteristics are those of AMBER (Astronomical Multi BEam combineR), the near infrared focal beam combiner of the Very Large Telescope Interferometric mode (VLTI), but most of the conclusions can be generalized to other single-mode instruments. We used the software package caos (Code for Adaptive Optics Systems) to take into account the atmospheric turbulence effect after correction by the ESO system MACAO (Multi-Application Curvature Adaptive Optics). The opto-mechanical study and design of the system correcting the atmospheric refraction on AMBER is then detailed. We showed that the atmospheric refraction becomes predominant over the atmospheric turbulence for some zenith angles z and spectral conditions: for z larger than 30{\circ} in J-band for example. The study of the optical system showed that it allows to achieve the required instrumental performance in terms of throughput in J- and H-bands. First observations in J-band of a bright star, alpha Cir star, at more than 30{\circ} from zenith clearly showed the gain to control the atmospheric refraction in a single mode instrument, and validated the operating law.

astro-ph.IM↗