Searcharxiv⌕ Search

arXiv subjects

Iurii Timrov

Publications and source records attributed to Iurii Timrov.

45 records · Page 3Linked to original sources

Self-consistent Hubbard parameters from density-functional perturbation theory in the ultrasoft and projector-augmented wave formulations

The self-consistent evaluation of Hubbard parameters using linear-response theory is crucial for quantitatively predictive calculations based on Hubbard-corrected density-functional theory. Here, we extend a recently-introduced approach based on density-functional perturbation theory (DFPT) for the calculation of the on-site Hubbard $U$ to also compute the inter-site Hubbard $V$. DFPT allows to reduce significantly computational costs, improve numerical accuracy, and fully automate the calculation of the Hubbard parameters by recasting the linear response of a localized perturbation into an array of monochromatic perturbations that can be calculated in the primitive cell. In addition, here we generalize the entire formalism from norm-conserving to ultrasoft and projector-augmented wave formulations, and to metallic ground states. After benchmarking DFPT against the conventional real-space Hubbard linear response in a supercell, we demonstrate the effectiveness of the present extended Hubbard formulation in determining the equilibrium crystal structure of Li$_x$MnPO$_4$ (x=0,1) and the subtle energetics of Li intercalation.

cond-mat.mtrl-sci↗

Electronic structure of pristine and Ni-substituted LaFeO$_3$ from near edge x-ray absorption fine structure experiments and first-principles simulations

We present a joint theoretical and experimental study of the oxygen $K$-edge spectra for LaFeO$_3$ and homovalent Ni-substituted LaFeO$_3$ (LaFe$_{0.75}$Ni$_{0.25}$O$_3$), using first-principles simulations based on density-functional theory with extended Hubbard functionals and x-ray absorption near edge structure (XANES) measurements. Ground-state and excited-state XANES calculations employ Hubbard on-site $U$ and inter-site $V$ parameters determined from first principles and the Lanczos recursive method to obtain absorption cross sections, which allows for a reliable description of XANES spectra in transition-metal compounds in a very broad energy range, with an accuracy comparable to that of hybrid functionals but at a substantially lower cost. We show that standard gradient-corrected exchange-correlation functionals fail in capturing accurately the electronic properties of both materials. In particular, for LaFe$_{0.75}$Ni$_{0.25}$O$_3$ they do not reproduce its semiconducting behaviour and provide a poor description of the pre-edge features at the O $K$ edge. The inclusion of Hubbard interactions leads to a drastic improvement, accounting for the semiconducting ground state of LaFe$_{0.75}$Ni$_{0.25}$O$_3$ and for a good agreement between calculated and measured XANES spectra. We show that the partial substitution of Fe for Ni affects the conduction-band bottom by generating a strongly hybridized O($2p$)-Ni($3d$) minority-spin empty electronic state. The present work, based on a consistent correction of self-interaction errors, outlines the crucial role of extended Hubbard functionals to describe the electronic structure of complex transition-metal oxides such as LaFeO$_3$ and LaFe$_{0.75}$Ni$_{0.25}$O$_3$ and paves the way to future studies on similar systems.

cond-mat.str-el↗

Hubbard-corrected density functional perturbation theory with ultrasoft pseudopotentials

We present in full detail a newly developed formalism enabling density functional perturbation theory (DFPT) calculations from a DFT+$U$ ground state. The implementation includes ultrasoft pseudopotentials and is valid for both insulating and metallic systems. It aims at fully exploiting the versatility of DFPT combined with the low-cost DFT+$U$ functional. This allows to avoid computationally intensive frozen-phonon calculations when DFT+$U$ is used to eliminate the residual electronic self-interaction from approximate functionals and to capture the localization of valence electrons e.g. on $d$ or $f$ states. In this way, the effects of electronic localization (possibly due to correlations) are consistently taken into account in the calculation of specific phonon modes, Born effective charges, dielectric tensors and in quantities requiring well converged sums over many phonon frequencies, as phonon density of states and free energies. The new computational tool is applied to two representative systems, namely CoO, a prototypical transition metal monoxide and LiCoO$_2$, a material employed for the cathode of Li-ion batteries. The results show the effectiveness of our formalism to capture in a quantitatively reliable way the vibrational properties of systems with localized valence electrons.

cond-mat.str-el↗

Self-consistent DFT+$U$+$V$ study of oxygen vacancies in SrTiO$_3$

Contradictory theoretical results for oxygen vacancies in SrTiO$_3$ (STO) were often related to the peculiar properties of STO, which is a $d^0$ transition metal oxide with mixed ionic-covalent bonding. Here, we apply, for the first time, density functional theory (DFT) within the extended Hubbard DFT+$U$+$V$ approach, including on-site as well as inter-site electronic interactions, to study oxygen-deficient STO with Hubbard $U$ and $V$ parameters computed self-consistently via density-functional perturbation theory. Our results demonstrate that the extended Hubbard functional is a promising approach to study defects in materials with electronic properties similar to STO. Indeed, DFT+$U$+$V$ provides a better description of stoichiometric STO compared to standard DFT or DFT+$U$, the band gap and crystal field splitting being in good agreement with experiments. In turn, also the description of the electronic properties of oxygen vacancies in STO is improved, with formation energies in excellent agreement with experiments as well as results obtained with the most frequently used hybrid functionals, however at a fraction of the computational cost. While our results do not fully resolve the contradictory findings reported in literature, our systematic approach leads to a deeper understanding of their origin, which stems from different cell sizes, STO phases, the exchange-correlation functional, and the treatment of structural relaxations and spin-polarization.

cond-mat.mtrl-sci↗

Self-consistent site-dependent DFT+$U$ study of stoichiometric and defective SrMnO$_3$

We propose a self-consistent site-dependent Hubbard $U$ approach for DFT+$U$ calculations of defects in complex transition-metal oxides, using Hubbard parameters computed via linear-response theory. The formation of a defect locally perturbs the chemical environment of Hubbard sites in its vicinity, resulting in different Hubbard $U$ parameters for different sites. Using oxygen vacancies in SrMnO$_3$ as a model system, we investigate the dependence of $U$ on the chemical environment and study its influence on the structural, electronic, and magnetic properties of defective bulk and strained thin-film structures. Our results show that a self-consistent $U$ improves the description of stoichiometric bulk SrMnO$_3$ with respect to GGA or GGA+$U$ calculations using an empirical $U$. For defective systems, $U$ changes as a function of the distance of the Hubbard site from the defect, its oxidation state and the magnetic phase of the bulk structure. Taking into account this dependence, in turn, affects the computed defect formation energies and the predicted strain- and/or defect-induced magnetic phase transitions, especially when occupied localized states appear in the band gap of the material upon defect creation.

cond-mat.mtrl-sci↗

Spin dynamics from time-dependent density functional perturbation theory

We present a new method to model spin-wave excitations in magnetic solids, based on the Liouville-Lanczos approach to time-dependent density functional perturbation theory. This method avoids computationally expensive sums over empty states and naturally deals with the coupling between spin and charge fluctuations, without ever explicitly computing charge-density susceptibilities. Spin-wave excitations are obtained with one Lanczos chain per magnon wave-number and polarization, avoiding the solution of the linear-response problem for every individual value of frequency, as other state-of-the-art approaches do. Our method is validated by computing magnon dispersions in bulk Fe and Ni, resulting in agreement with previous theoretical studies in both cases, and with experiment in the case of Fe. The disagreement in the case of Ni is also comparable with that of previous computations.

cond-mat.mtrl-sci↗

Hubbard parameters from density-functional perturbation theory

We present a transparent and computationally efficient approach for the first-principles calculation of Hubbard parameters from linear-response theory. This approach is based on density-functional perturbation theory and the use of monochromatic perturbations. In addition to delivering much improved efficiency, the present approach makes it straightforward to calculate automatically these Hubbard parameters for any given system, with tight numerical control on convergence and precision. The effectiveness of the method is showcased in three case studies - Cu$_2$O, NiO, and LiCoO$_2$ - and by the direct comparison with finite differences in supercell calculations.

cond-mat.str-el↗

Multimodel Approach to the Optical Properties of Molecular Dyes in Solution

We introduce a multimodel approach to the simulation of the optical properties of molecular dyes in solution, whereby the effects of thermal fluctuations and of dielectric screening on the absorption spectra are accounted for by explicit and implicit solvation models, respectively. Thermal effects are treated by averaging the spectra of molecular configurations generated by an ab initio molecular-dynamics simulation where solvent molecules are treated explicitly. Dielectric effects are then dealt with implicitly by computing the spectra upon removal of the solvent molecules and their replacement with an effective medium, in the spirit of a continuum solvation model. Our multimodel approach is validated by comparing its predictions with those of a fully explicit-solvation simulation for cyanidin-3-glucoside (cyanin) chromophore in water. While multimodel and fully explicit-solvent spectra may differ considerably for individual configurations along the trajectory, their time averages are remarkably similar, thus providing a solid benchmark of the former and allowing us to save considerably on the computer resources needed to predict accurate absorption spectra. The power of the proposed methodology is finally demonstrated by the excellent agreement between its predictions and the absorption spectra of cyanin measured at strong and intermediate acidity conditions.

physics.chem-ph↗

Electron energy-loss and inelastic X-ray scattering cross sections from time-dependent density-functional perturbation theory

The Liouville-Lanczos approach to linear-response time-dependent density-functional theory is generalized so as to encompass electron energy-loss and inelastic X-ray scattering spectroscopies in periodic solids. The computation of virtual orbitals and the manipulation of large matrices are avoided by adopting a representation of response orbitals borrowed from (time-independent) density-functional perturbation theory and a suitable Lanczos recursion scheme. The latter allows the bulk of the numerical work to be performed at any given transferred momentum only once, for a whole extended frequency range. The numerical complexity of the method is thus greatly reduced, making the computation of the loss function over a wide frequency range at any given transferred momentum only slightly more expensive than a single standard ground-state calculation, and opening the way to computations for systems of unprecedented size and complexity. Our method is validated on the paradigmatic examples of bulk silicon and aluminum, for which both experimental and theoretical results already exist in the literature.

cond-mat.mtrl-sci↗