arXiv subjects

Ivan Argatov

Publications and source records attributed to Ivan Argatov.

8 recordsLinked to original sources

arXiv2017

How to define the storage and loss moduli for a rheologically nonlinear material?

A large amplitude oscillatory shear (LAOS) is considered in the strain-controlled regime, and the interrelation between the Fourier transform (FT) and the stress decomposition (SD) approaches is established. Several definitions of the generalized storage and loss moduli are examined in a unified conceptual scheme based on the Lissajous--Bowditch plots. An illustrative example of evaluating the generalized moduli from a LAOS flow is given.

physics.flu-dyn↗

arXiv2015

An asymptotic model for the deformation of a transversely isotropic, transversely homogeneous biphasic cartilage layer

In the present paper, an asymptotic model is constructed for the short-time deformation of an articular cartilage layer modeled as transversely isotropic, transversely homogeneous (TITH) biphasic material. It is assumed that the layer thickness is relatively small compared with the characteristic size of the normal surface load applied to the upper surface of the cartilage layer, while the bottom surface is assumed to be firmly attached to a rigid impermeable substrate. In view of applications to articular contact problems it is assumed that the interstitial fluid is not allowed to escape through the articular surface.

q-bio.TO↗

arXiv2015

An asymptotic model for a thin bonded elastic layer coated with an elastic membrane

The deformation problem for a transversely isotropic elastic layer bonded to a rigid substrate and coated with a very thin elastic layer made of another transversely isotropic material is considered. The leading-order asymptotic models (for compressible and incompressible layers) are constructed based on the simplifying assumptions that the generalized plane stress conditions apply to the coating layer, and the flexural stiffness of the coating layer is negligible compared to its tensile stiffness.

math.AP↗

arXiv2013

Atomic force microscope based indentation stiffness tomography - An asymptotic model

The so-called indentation stiffness tomography technique for detecting the interior mechanical properties of an elastic sample with an inhomogeneity is analyzed in the framework of the asymptotic modeling approach under the assumption of small size of the inhomogeneity. In particular, it is assumed that the inhomogeneity size and the size of contact area under the indenter are small compared with the distance between them. By the method of matched asymptotic expansions, the first-order asymptotic solution to the corresponding frictionless unilateral contact problem is obtained. The case of an elastic half-space containing a small spherical inhomogeneity has been studied in detail. Based on the grid indentation technique, a procedure for solving the inverse problem of extracting the inhomogeneity parameters is proposed.

math.AP↗

arXiv2012

Sinusoidally-driven unconfined compression test for a biphasic tissue

In recent years, a number of experimental studies have been conducted to investigate the mechanical behavior of water-saturated biological tissues like articular cartilage under dynamic loading. For in vivo measurements of tissue viability, the indentation tests with the half-sinusoidal loading history were proposed. In the present paper, the sinusoidally-driven compression test utilizing either the load-controlled or displacement-controlled loading protocol are considered in the framework of linear biphasic layer model. Closed-form analytical solutions for the integral characteristics of the compression test are obtained.

math.AP↗

arXiv2012

Mathematical modeling of linear viscoelastic impact: Application to drop impact testing of articular cartilage

In recent years, a number of experimental studies have been conducted to investigate the mechanical behavior and damage mechanisms of articular cartilage under impact loading. Some experimentally observed results have been explained using a non-linear viscoelastic impact model. At the same time, there is the need of simple mathematical models, which allow comparing experimental results obtained in drop impact testing with impact loads of different weights and incident velocities. The objective of this study was to investigate theoretically whether the main features of articular impact could be qualitatively predicted using a linear viscoelastic theory or the linear biphasic theory. In the present paper, exact analytical solutions are obtained for the main parameters of the Kelvin-Voigt and Maxwell impact models. Perturbation analysis of the impact process according to the standard viscoelastic solid model is performed. Asymptotic solutions are obtained for the drop weight impact test. The dependence of the coefficient of restitution on the impactor parameters has been studied in detail.

math.CA↗

arXiv2012

Contact problem for a thin elastic layer with variable thickness: Application to sensitivity analysis of articular contact mechanics

In the framework of the recently developed asymptotic models for tibio-femoral contact incorporating frictionless elliptical contact interaction between thin elastic, viscoelastic, or biphasic cartilage layers, we apply an asymptotic modeling approach for analytical evaluating the sensitivity of crucial parameters in joint contact mechanics due to small variations in the thicknesses of the contacting cartilage layers. The four term asymptotic expansion for the normal displacement at the contact surface is explicitly derived, which recovers the corresponding solution obtained previously for the 2D case in the compressible case. It was found that to minimize the influence of the cartilage thickness non-uniformity on the force-displacement relationship, the effective thicknesses of articular layers should be determined from a special optimization criterion.

math.AP↗

arXiv2012

Asymptotics of the resonances for a continuously stratified layer

Ultrasound wave propagation in a nonhomogeneous linearly elastic layer of constant thickness is considered. The resonances for the corresponding acoustic propagator are studied. It is shown that the distribution of the resonances depends on the smoothness of the coefficients. Namely, if the coefficients have jump discontinuities at the boundaries, then the resonances are asymptotically distributed along a straight line parallel to the real axis on the unphysical sheet of the complex frequency plane. In the contrary, if the coefficients are continuous, then it is shown that the resonances are asymptotically distributed along a logarithmic curve. The spacing between two successive resonances turns out to be sensitive to articular cartilage degeneration. The application of the obtained results to ultrasound testing of articular cartilage is discussed.

math-ph↗