Searcharxiv⌕ Search

arXiv subjects

Ivan Izmestiev

Publications and source records attributed to Ivan Izmestiev.

At least 37 records · Page 2Linked to original sources

Deformation of quadrilaterals and addition on elliptic curves

The space of quadrilaterals with fixed side lengths is an elliptic curve. Darboux used this to prove a porism on foldings. In this article, the space of oriented quadrilaterals is studied on the base of biquadratic equations between their angles. The space of non-oriented quadrilaterals is also an elliptic curve, doubly covered by the previous one, and is described by a biquadratic relation between the diagonals. The spaces of non-oriented quadrilaterals with the side lengths $(a_1, a_2, a_3, a_4)$ and $(s-a_1, s-a_2, s-a_3, s-a_4)$ turn out to be isomorphic via identification of two quadrilaterals with the same diagonal lengths. We prove a periodicity condition for foldings, similar to Cayley's condition for the Poncelet porism. Some applications to kinematics and geometry are presented.

math.DS↗

Classification of flexible Kokotsakis polyhedra with quadrangular base

A Kokotsakis polyhedron with quadrangular base is a neighborhood of a quadrilateral in a quad surface. Generically, a Kokotsakis polyhedron is rigid. Up to now, several flexible classes were known, but a complete classification was missing. In the present paper, we provide such a classification. The analysis is based on the fact that the dihedral angles of a Kokotsakis polyhedron are related by an Euler-Chasles correspondence. It results in a diagram of elliptic curves covering complex projective planes. A polyhedron is flexible if and only if this diagram commutes.

math.MG↗

A simple proof of an isoperimetric inequality for euclidean and hyperbolic cone-surfaces

We prove that the isoperimetric inequalities in the euclidean and hyperbolic plane hold for all euclidean, respectively hyperbolic, cone-metrics on a disk with singularities of negative curvature. This is a discrete analog of the theorems of Weil and Bol that deal with Riemannian metrics of curvature bounded from above by 0, respectively by -1. A stronger discrete version was proved by A.D.Alexandrov, with a subsequent extension by approximation to metrics of bounded integral curvature. Our proof uses "discrete conformal deformations" of the metric that eliminate the singularities and increase the area. Therefore it resembles Weil's argument, which uses the uniformization theorem and the harmonic minorant of a subharmonic function.

math.DG↗

Fitting centroids by a projective transformation

Given two subsets of R^d, when does there exist a projective transformation that maps them to two sets with a common centroid? When is this transformation unique modulo affine transformations? We study these questions for 0- and d-dimensional sets, obtaining several existence and uniqueness results as well as examples of non-existence or non-uniqueness. If both sets have dimension 0, then the problem is related to the analytic center of a polytope and to polarity with respect to an algebraic set. If one set is a single point, and the other is a convex body, then it is equivalent by polar duality to the existence and uniqueness of the Santaló point. For a finite point set versus a ball, it generalizes the Möbius centering of edge-circumscribed convex polytopes and is related to the conformal barycenter of Douady-Earle. If both sets are $d$-dimensional, then we are led to define the Santaló point of a pair of convex bodies. We prove that the Santaló point of a pair exists and is unique, if one of the bodies is contained within the other and has Hilbert diameter less than a dimension-depending constant. The bound is sharp and is obtained by a box inside a cross-polytope.

math.MG↗

Derived subdivisions make every PL sphere polytopal

We give a simple proof that some iterated derived subdivision of every PL sphere is combinatorially equivalent to the boundary of a simplicial polytope, thereby resolving a problem of Billera (personal communication).

math.CO↗

Shapes of polyhedra, mixed volumes, and hyperbolic geometry

We are generalizing to higher dimensions the Bavard-Ghys construction of the hyperbolic metric on the space of polygons with fixed directions of edges. The space of convex d-dimensional polyhedra with fixed directions of facet normals has a decomposition into type cones that correspond to different combinatorial types of polyhedra. This decomposition is a subfan of the secondary fan of a vector configuration and can be analyzed with the help of Gale diagrams. We construct a family of quadratic forms on each of the type cones using the theory of mixed volumes. The Alexandrov-Fenchel inequalities ensure that these forms have exactly one positive eigenvalue. This introduces a piecewise hyperbolic structure on the space of similarity classes of polyhedra with fixed directions of facet normals. We show that some of the dihedral angles on the boundary of the resulting cone-manifold are equal to π/2.

math.GT↗

There is no triangulation of the torus with vertex degrees 5, 6, ..., 6, 7 and related results: Geometric proofs for combinatorial theorems

There is no 5,7-triangulation of the torus, that is, no triangulation with exactly two exceptional vertices, of degree 5 and 7. Similarly, there is no 3,5-quadrangulation. The vertices of a 2,4-hexangulation of the torus cannot be bicolored. Similar statements hold for 4,8-triangulations and 2,6-quadrangulations. We prove these results, of which the first two are known and the others seem to be new, as corollaries of a theorem on the holonomy group of a euclidean cone metric on the torus with just two cone points. We provide two proofs of this theorem: One argument is metric in nature, the other relies on the induced conformal structure and proceeds by invoking the residue theorem. Similar methods can be used to prove a theorem of Dress on infinite triangulations of the plane with exactly two irregular vertices. The non-existence results for torus decompositions provide infinite families of graphs which cannot be embedded in the torus.

math.CO↗

Infinitesimal rigidity of convex surfaces through the second derivative of the Hilbert-Einstein functional I: Polyhedral case

The paper is centered around a new proof of the infinitesimal rigidity of convex polyhedra. The proof is based on studying derivatives of the discrete Hilbert-Einstein functional on the space of "warped polyhedra" with a fixed metric on the boundary. This approach is in a sense dual to using derivatives of the volume in order to prove the Gauss infinitesimal rigidity of convex polyhedra, which deals with deformations that preserve face normals and face areas. In the spherical and in the hyperbolic-de Sitter space, there is a perfect duality between the Hilbert-Einstein functional and the volume, as well as between both kinds of rigidity. We also discuss directions for future research, including elementary proofs of the infinitesimal rigidity of hyperbolic (cone-)manifolds and development of a discrete Bochner technique.

math.DG↗

Infinitesimal rigidity of convex surfaces through the second derivative of the Hilbert-Einstein functional II: Smooth case

The paper is centered around a new proof of the infinitesimal rigidity of smooth closed surfaces with everywhere positive Gauss curvature. We use a reformulation that replaces deformation of an embedding by deformation of the metric inside the body bounded by the surface. The proof is obtained by studying derivatives of the Hilbert-Einstein functional with boundary term. This approach is in a sense dual to proving the Gauss infinitesimal rigidity, that is rigidity with respect to the Gauss curvature parametrized by the Gauss map, by studying derivatives of the volume bounded by the surface. We recall that Blaschke's classical proof of the infinitesimal rigidity is also related to the Gauss infinitesimal rigidity, but in a different way: while Blaschke uses Gauss rigidity of the same surface, we use the Gauss rigidity of the polar dual. In the spherical and in the hyperbolic-de Sitter space, there is a perfect duality between the Hilbert-Einstein functional and the volume, as well as between both kinds of rigidity. We also indicate directions for future research, including the infinitesimal rigidity of convex cores of hyperbolic 3--manifolds.

math.DG↗

Examples of infinitesimally flexible 3--dimensional hyperbolic cone-manifolds

Weiss and, independently, Mazzeo and Montcouquiol recently proved that a 3--dimensional hyperbolic cone-manifold (possibly with vertices) with all cone angles less than $2π$ is infinitesimally rigid. On the other hand, Casson provided 1998 an example of an infinitesimally flexible cone-manifold with some of the cone angles larger than $2π$. In this paper several new examples of infinitesimally flexible cone-manifolds are constructed. The basic idea is that the double of an infinitesimally flexible polyhedron is an infinitesimally flexible cone-manifold. With some additional effort, we are able to construct infinitesimally flexible cone-manifolds without vertices and with all cone angles larger than $2π$.

math.GT↗

Gauss images of hyperbolic cusps with convex polyhedral boundary

We prove that a 3--dimensional hyperbolic cusp with convex polyhedral boundary is uniquely determined by its Gauss image. Furthermore, any spherical metric on the torus with cone singularities of negative curvature and all closed contractible geodesics of length greater than $2π$ is the metric of the Gauss image of some convex polyhedral cusp. This result is an analog of the Rivin-Hodgson theorem characterizing compact convex hyperbolic polyhedra in terms of their Gauss images. The proof uses a variational method. Namely, a cusp with a given Gauss image is identified with a critical point of a functional on the space of cusps with cone-type singularities along a family of half-lines. The functional is shown to be concave and to attain maximum at an interior point of its domain. As a byproduct, we prove rigidity statements with respect to the Gauss image for cusps with or without cone-type singularities. In a special case, our theorem is equivalent to existence of a circle pattern on the torus, with prescribed combinatorics and intersection angles. This is the genus one case of a theorem by Thurston. In fact, our theorem extends Thurston's theorem in the same way as Rivin-Hodgson's theorem extends Andreev's theorem on compact convex polyhedra with non-obtuse dihedral angles. The functional used in the proof is the sum of a volume term and curvature term. We show that, in the situation of Thurston's theorem, it is the potential for the combinatorial Ricci flow considered by Chow and Luo. Our theorem represents the last special case of a general statement about isometric immersions of compact surfaces.

math.DG↗

Projective background of the infinitesimal rigidity of frameworks

We present proofs of two classical theorems. The first one, due to Darboux and Sauer, states that infinitesimal rigidity is a projective invariant; the other one establishes relations (infinitesimal Pogorelov maps) between the infinitesimal motions of a Euclidean framework and of its hyperbolic and spherical images. The arguments use the static formulation of infinitesimal rigidity. The duality between statics and kinematics is established through the principles of virtual work. A geometric approach to statics, due essentially to Grassmann, makes both theorems straightforward. Besides, it provides a simple derivation of the formulas both for the Darboux-Sauer correspondence and for the infinitesimal Pogorelov maps.

math.MG↗

The Colin de Verdière number and graphs of polytopes

The Colin de Verdière number $μ(G)$ of a graph $G$ is the maximum corank of a Colin de Verdière matrix for $G$ (that is, of a Schrödinger operator on $G$ with a single negative eigenvalue). In 2001, Lovász gave a construction that associated to every convex 3-polytope a Colin de Verdière matrix of corank 3 for its 1-skeleton. We generalize the Lovász construction to higher dimensions by interpreting it as minus the Hessian matrix of the volume of the polar dual. As a corollary, $μ(G) \ge d$ if $G$ is the 1-skeleton of a convex $d$-polytope. Determination of the signature of the Hessian of the volume is based on the second Minkowski inequality for mixed volumes and on Bol's condition for equality.

math.CO↗

On the infinitesimal rigidity of polyhedra with vertices in convex position

Let $P \subset \R^3$ be a polyhedron. It was conjectured that if $P$ is weakly convex (i. e. its vertices lie on the boundary of a strictly convex domain) and decomposable (i. e. $P$ can be triangulated without adding new vertices), then it is infinitesimally rigid. We prove this conjecture under a weak additional assumption of codecomposability. The proof relies on a result of independent interest concerning the Hilbert-Einstein function of a triangulated convex polyhedron. We determine the signature of the Hessian of that function with respect to deformations of the interior edges. In particular, if there are no interior vertices, then the Hessian is negative definite.

math.DG↗

Hyperbolic cusps with convex polyhedral boundary

We prove that a 3-dimensional hyperbolic cusp with convex polyhedral boundary is uniquely determined by the metric induced on its boundary. Furthemore, any hyperbolic metric on the torus with cone singularities of positive curvature can be realized as the induced metric on the boundary of a convex polyhedral cusp. The proof uses the total scalar curvature functional on the space of ``cusps with particles'', which are hyperbolic cone-manifolds with the singular locus a union of half-lines. We prove, in addition, that convex polyhedral cusps with particles are rigid with respect to the induced metric on the boundary and the curvatures of the singular locus. Our main theorem is equivalent to a part of a general statement about isometric immersions of compact surfaces.

math.DG↗

A variational proof of Alexandrov's convex cap theorem

We give a variational proof of the existence and uniqueness of a convex cap with the given upper boundary. The proof uses the concavity of the total scalar curvature functional on the space of generalized convex caps. As a byproduct, we prove that generalized convex caps with the fixed boundary are globally rigid, that is uniquely determined by their curvatures.

math.DG↗