Searcharxiv⌕ Search

arXiv subjects

Ivan Peric

Publications and source records attributed to Ivan Peric.

15 recordsLinked to original sources
arXiv2026

LF-MightyPix: A second HV-MAPS prototype for the {LHCb} Mighty-Tracker

For the future high-luminosity operation of the LHCb experiment, the downstream tracker will be upgraded to the Mighty-Tracker. A key part of this upgrade is the introduction of silicon pixel detectors, MightyPix, in the central region of the tracker. We have developed MightyPix prototype chips using High-Voltage Monolithic Active Pixel Sensors fabricated in a commercially available CMOS process on high-resistivity wafers. The second prototype chip, LF-MightyPix, is fabricated in the LFoundry 150 nm CMOS process. LF-MightyPix has a chip size of 3.5 mm $\times$ 4.0 mm and a pixel size of 0.1 mm $\times$ 0.1 mm. For each pixel hit, both the time of arrival and the time over threshold are recorded to ensure correct bunch-crossing identification at 40 MHz. The results presented in this paper confirm compatibility with the MightyPix requirements.

physics.ins-det↗
arXiv2025

AstroPix: A Pixelated HVCMOS Sensor for Space-Based Gamma-Ray Measurement

A next-generation medium-energy gamma-ray telescope targeting the MeV range would address open questions in astrophysics regarding how extreme conditions accelerate cosmic-ray particles, produce relativistic jet outflows, and more. One concept, AMEGO-X, relies upon the mission-enabling CMOS Monolithic Active Pixel Sensor silicon chip AstroPix. AstroPix is designed for space-based use, featuring low noise, low power consumption, and high scalability. Desired performance of the device include an energy resolution of 5 keV (or 10% FWHM) at 122 keV and a dynamic range per-pixel of 25-700 keV, enabled by the addition of a high-voltage bias to each pixel which supports a depletion depth of 500 um. This work reports on the status of the AstroPix development process with emphasis on the current version under test, version three (v3), and highlights of version two (v2). Version 3 achieves energy resolution of 10.4 +/- 3.2% at 59.5 keV and 94 +/- 6 um depletion in a low-resistivity test silicon substrate.

astro-ph.IM↗
arXiv2024

ComPair-2: A Next Generation Medium Energy Gamma-ray Telescope Prototype

Many questions posed in the Astro2020 Decadal survey in both the New Messengers and New Physics and the Cosmic Ecosystems science themes require a gamma-ray mission with capabilities exceeding those of existing (e.g. Fermi, Swift) and planned (e.g. COSI) observatories. ComPair, the Compton Pair telescope, is a prototype of such a next-generation gamma-ray mission. It had its inaugural balloon flight from Ft. Sumner, New Mexico in August 2023. To continue the goals of the ComPair project to develop technologies that will enable a future gamma-ray mission, the next generation of ComPair (ComPair-2) will be upgraded to increase the sensitivity and low-energy transient capabilities of the instrument. These advancements are enabled by AstroPix, a silicon monolithic active pixel sensor, in the tracker and custom dual-gain silicon photomultipliers and front-end electronics in the calorimeter. This effort builds on design work for the All-sky Medium Energy Gamma-ray Observatory eXplorer (AMEGO-X) concept that was submitted the 2021 MIDEX Announcement of Opportunity. Here we describe the ComPair-2 prototype design and integration and testing plans to advance the readiness level of these novel technologies.

astro-ph.IM↗
arXiv2024

A-STEP: The AstroPix Sounding Rocket Technology Demonstration Payload

A next-generation medium-energy (100 keV to 100 MeV) gamma-ray observatory will greatly enhance the identification and characterization of multimessenger sources in the coming decade. Coupling gamma-ray spectroscopy, imaging, and polarization to neutrino and gravitational wave detections will develop our understanding of various astrophysical phenomena including compact object mergers, supernovae remnants, active galactic nuclei and gamma-ray bursts. An observatory operating in the MeV energy regime requires technologies that are capable of measuring Compton scattered photons and photons interacting via pair production. AstroPix is a monolithic high voltage CMOS active pixel sensor which enables future gamma-ray telescopes in this energy range. AstroPix's design is iterating towards low-power (~1.5 mW/cm$^{2}$), high spatial (500 microns pixel pitch) and spectral (<5 keV at 122 keV) tracking of photon and charged particle interactions. Stacking planar arrays of AstroPix sensors in three dimensions creates an instrument capable of reconstructing the trajectories and energies of incident gamma rays over large fields of view. A prototype multi-layered AstroPix instrument, called the AstroPix Sounding rocket Technology dEmonstration Payload (A-STEP), will test three layers of AstroPix quad chips in a suborbital rocket flight. These quad chips (2x2 joined AstroPix sensors) form the 4x4 cm$^{2}$ building block of future large area AstroPix instruments, such as ComPair-2 and AMEGO-X. This payload will be the first demonstration of AstroPix detectors operated in a space environment and will demonstrate the technology's readiness for future astrophysical and nuclear physics applications. In this work, we overview the design and state of development of the ASTEP payload.

astro-ph.IM↗
arXiv2024

The path toward 500 $\mu$m depletion of AstroPix, a pixelated silicon HVCMOS sensor for space and EIC

The precise reconstruction of Compton-scatter events is paramount for an imaging medium-energy gamma-ray telescope. The proposed AMEGO-X is enabled by a silicon tracker utilizing AstroPix chips - a pixelated silicon HVCMOS sensor novel for space use. To achieve science goals, each 500 x 500 $\mu$m$^2$ pixel must be sensitive for energy deposits ranging from 25 - 700 keV with an energy resolution of 5 keV at 122 keV (< 10%). This is achieved through depletion of the 500 $\mu$m thick sensor, although complete depletion poses an engineering and design challenge. This work will summarize the current status of depletion measurements highlighting direct measurement with TCT laser scanning and the agreement with simulation. Future plans for further testing will also be identified.

astro-ph.IM↗
arXiv2023

AstroPix: CMOS pixels in space

Space-based gamma-ray telescopes such as the Fermi Large Area Telescope have used single sided silicon strip detectors to measure the position of charged particles produced by incident gamma rays with high resolution. At energies in the Compton regime and below, two dimensional position information within a single detector is required. Double sided silicon strip detectors are one option; however, this technology is difficult to fabricate and large arrays are susceptible to noise. This work outlines the development and implementation of monolithic CMOS active pixel silicon sensors, AstroPix, for use in future gamma-ray telescopes. Based upon detectors designed using the HVCMOS process at the Karlsruhe Institute of Technology, AstroPix has the potential to maintain the high energy and angular resolution required of a medium-energy gamma-ray telescope while reducing noise with the dual detection-and-readout capabilities of a CMOS chip. The status of AstroPix development and testing as well as outlook for application in future telescopes is presented.

astro-ph.IM↗
arXiv2022

AstroPix: Novel monolithic active pixel silicon sensors for future gamma-ray telescopes

Space-based gamma-ray telescopes such as the Fermi Large Area Telescope have used single sided silicon strip detectors to track secondary charged particles produced by primary gamma-rays with high resolution. At the lower energies targeted by keV-MeV telescopes, two dimensional position information within a single detector is required for event reconstruction - especially in the Compton regime. This work describes the development of monolithic CMOS active pixel silicon sensors - AstroPix - as a novel technology for use in future gamma-ray telescopes. Based upon sensors (ATLASPix) designed for use in the ATLAS detector at the Large Hadron Collider, AstroPix has the potential to maintain high performance while reducing noise with low power consumption. This is achieved with the dual detection and readout capabilities in each CMOS pixel. The status of AstroPix development and testing, as well as outlook for future testing and application, will be presented.

astro-ph.IM↗
arXiv2022

The Future of Gamma-Ray Experiments in the MeV-EeV Range

Gamma-rays, the most energetic photons, carry information from the far reaches of extragalactic space with minimal interaction or loss of information. They bring messages about particle acceleration in environments so extreme they cannot be reproduced on earth for a closer look. Gamma-ray astrophysics is so complementary with collider work that particle physicists and astroparticle physicists are often one in the same. Gamma-ray instruments, especially the Fermi Gamma-ray Space Telescope, have been pivotal in major multi-messenger discoveries over the past decade. There is presently a great deal of interest and scientific expertise available to push forward new technologies, to plan and build space- and ground-based gamma-ray facilities, and to build multi-messenger networks with gamma rays at their core. It is therefore concerning that before the community comes together for planning exercises again, much of that infrastructure could be lost to a lack of long-term planning for support of gamma-ray astrophysics. Gamma-rays with energies from the MeV to the EeV band are therefore central to multiwavelength and multi-messenger studies to everything from astroparticle physics with compact objects, to dark matter studies with diffuse large scale structure. These goals and new discoveries have generated a wave of new gamma-ray facility proposals and programs. This paper highlights new and proposed gamma-ray technologies and facilities that have each been designed to address specific needs in the measurement of extreme astrophysical sources that probe some of the most pressing questions in fundamental physics for the next decade. The proposed instrumentation would also address the priorities laid out in the recent Astro2020 Decadal Survey, a complementary study by the astrophysics community that provides opportunities also relevant to Snowmass.

astro-ph.HE↗
arXiv2021

Developing the Future of Gamma-ray Astrophysics with Monolithic Silicon Pixels

This paper explores the potential of AstroPix, a project to develop Complementary Metal Oxide Semiconductor (CMOS) pixels for the next generation of space-based high-energy astrophysics experiments. Multimessenger astrophysics is a rapidly developing field whose upcoming missions need support from new detector technology such as AstroPix. ATLASPix, a monolithic silicon detector optimized for the ATLAS particle detector at CERN, is the beginning of the larger AstroPix project. Energy resolution is a driving parameter in the reconstruction of gamma-ray events, and therefore the characterization of ATLASPix energy resolution is the focus of this paper. The intrinsic energy resolution of the detector exceeded our baseline requirements of <10% at 60 keV. The digital output of ATLASPix results in energy resolutions insufficient to advance gamma-ray astronomy. However, the results from the intrinsic energy resolution indicate the digital capability of the detector can be redesigned, and the next generation of pixels for the larger AstroPix project have already been constructed. Iterations of AstroPix-type pixels are an exciting technology candidate to support new space-based missions.

astro-ph.IM↗
arXiv2021

AstroPix: Investigating the Potential of Silicon Pixel Sensors in the Future of Gamma-ray Astrophysics

This paper details preliminary photon measurements with the monolithic silicon detector ATLASPix, a pixel detector built and optimized for the CERN experiment ATLAS. The goal of this paper is to determine the promise of pixelated silicon in future space-based gamma-ray experiments. With this goal in mind, radioactive photon sources were used to determine the energy resolution and detector response of ATLASPix; these are novel measurements for ATLASPix, a detector built for a ground-based particle accelerator. As part of this project a new iteration of monolithic Si pixels, named AstroPix, have been created based on ATLASPix, and the eventual goal is to further optimize AstroPix for gamma-ray detection by constructing a prototype Compton telescope.The energy resolution of both the digital and analog output of ATLASPix is the focus of this paper, as it is a critical metric for Compton telescopes. It was found that with the analog output of the detector, the energyresolution of a single pixel was 7.69 +/- 0.13% at 5.89 keV and 7.27 +/- 1.18% at 30.1 keV, which exceeds the conservative baseline requirements of 10% resolution at 60 keV and is an encouraging start to an optimistic goal of<2% resolution at 60 keV. The digital output of the entire detector consistently yielded energy resolutions that exceeded 100% for different sources. The analog output of the monolithic silicon pixels indicates that thisis a promising technology for future gamma-ray missions, while the analysis of the digital output points to the need for a redesign of future photon-sensitive monolithic silicon pixel detectors.

astro-ph.IM↗
arXiv2019

Electrical characterization of AMS aH18 HV-CMOS after neutrons and protons irradiation

In view of the tracking detector application to the ATLAS High Luminosity LHC (HL-LHC) upgrade, we have developed a new generation of High Voltage CMOS (HV-CMOS) monolithic pixel-sensor prototypes featuring the AMS aH18 (180 nm) commercial CMOS technology. By fully integrating both analog and digital readout-circuitry on the same particle-detecting substrate, current challenges of hybrid sensor technologies, i.e., larger readout input-capacitance, lower production-yield, and higher production and integration cost, can be downscaled. The large electrode design using high-resistivity substrates actively helps to mitigate the charge-trapping effects, making these chips radiation hard. The surface and bulk damage induced in high irradiation environment change the effective doping concentration of the device, which modulates high electric fields as the reverse-bias voltage increases. This effect can cause high leakage current and premature electrical breakdown, driven by impact ionization. In order to assess the characteristics of heavily irradiated samples, we have carried out dedicated campaigns on ATLASPix1 chips that included irradiations of neutrons and protons, made at different facilities. Here, we report on the electrical characterization of the irradiated samples at different ambient conditions, also in comparison to their pre-irradiation properties. Results demonstrate that hadron irradiated devices can be safely operated at a voltage high enough to allow for high efficiency, up to the fluence of 2E15 neq/cm2, beyond the radiation levels (TID and NIEL) expected in the outermost pixel layers of the new ATLAS tracker for HL-LHC.

physics.ins-det↗
arXiv2018

A novel detector system for KATRIN to search for keV-scale sterile neutrinos

Sterile neutrinos are a minimal extension of the Standard Model of Particle Physics. If their mass is in the kilo-electron-volt regime, they are viable dark matter candidates. One way to search for sterile neutrinos in a laboratory-based experiment is via tritium-beta decay, where the new neutrino mass eigenstate would manifest itself as a kink-like distortion of the $\beta$-decay spectrum. The objective of the TRISTAN project is to extend the KATRIN setup with a new multi-pixel silicon drift detector system to search for a keV-scale sterile neutrino signal. In this paper we describe the requirements of such a new detector, and present first characterization measurement results obtained with a 7-pixel prototype system.

physics.ins-det↗
arXiv2018

Performance of CMOS pixel sensor prototypes in ams H35 and aH18 technology for the ATLAS ITk upgrade

Pixel sensors based on commercial high-voltage CMOS processes are an exciting technology that is considered as an option for the outer layer of the ATLAS inner tracker upgrade at the High Luminosity LHC. Here, charged particles are detected using deep n-wells as sensor diodes with the depleted region extending into the silicon bulk. Both analog and digital readout electronics can be added to achieve different levels of integration up to a fully monolithic sensor. Small scale prototypes using the ams CMOS technology have previously demonstrated that it can achieve the required radiation tolerance of $10^{15}~\text{n}_\text{eq}/\text{cm}^2$ and detection efficiencies above $99.5~\%$. Recently, large area prototypes, comparable in size to a full sensor, have been produced that include most features required towards a final design: the H35demo prototype produced in ams H35 technology that supports both external and integrated readout and the monolithic ATLASPix1 pre-production design produced in ams aH18 technology. Both chips are based on large fill-factor pixel designs, but differ in readout structure. Performance results for H35DEMO with capacitively-coupled external readout and first results for the monolithic ATLASPix1 are shown.

physics.ins-det↗
arXiv2016

Prototype Active Silicon Sensor in 150 nm HR-CMOS Technology for ATLAS Inner Detector Upgrade

The LHC Phase-II upgrade will lead to a significant increase in luminosity, which in turn will bring new challenges for the operation of inner tracking detectors. A possible solution is to use active silicon sensors, taking advantage of commercial CMOS technologies. Currently ATLAS R&D programme is qualifying a few commercial technologies in terms of suitability for this task. In this paper a prototype designed in one of them (LFoundry 150 nm process) will be discussed. The chip architecture will be described, including different pixel types incorporated into the design, followed by simulation and measurement results.

physics.ins-det↗