arXiv subjects

Ivan Rungger

Publications and source records attributed to Ivan Rungger.

At least 55 records · Page 3Linked to original sources

arXiv2018

Unique excitonic effects in tungsten disulphide monolayers on two-layer graphene

Light emission in atomically thin heterostructures is known to depend on the type of materials, number and stacking sequence of the constituent layers. Here we show that the thickness of a two-dimensional substrate can be crucial in modulating the light emission. We study the layer-dependent charge transfer in vertical heterostructures built from monolayer tungsten disulphide (WS2) on one- and two-layer epitaxial graphene, unravelling the effect that the interlayer electronic coupling has on the excitonic properties of such heterostructures. We bring evidence that the excitonic properties of WS2 can be effectively tuned by the number of supporting graphene layers. Integrating WS2 monolayers with two-layer graphene leads to a significant enhancement of the photoluminescence response, up to one order of magnitude higher compared to WS2 supported on one-layer graphene. Our findings highlight the importance of substrate engineering when constructing atomically thin layered heterostructures.

cond-mat.mtrl-sci↗

arXiv2018

Spin-Polarized Tunneling through Chemical Vapor Deposited Multilayer Molybdenum Disulfide

The two-dimensional (2D) semiconductor molybdenum disulfide (MoS2) has attracted widespread attention for its extraordinary electrical, optical, spin and valley related properties. Here, we report on spin polarized tunneling through chemical vapor deposited (CVD) multilayer MoS2 (~7 nm) at room temperature in a vertically fabricated spin-valve device. A tunnel magnetoresistance (TMR) of 0.5 - 2 % has been observed, corresponding to spin polarization of 5 - 10 % in the measured temperature range of 300 - 75 K. First principles calculations for ideal junctions results in a tunnel magnetoresistance up to 8 %, and a spin polarization of 26 %. The detailed measurements at different temperatures and bias voltages, and density functional theory calculations provide information about spin transport mechanisms in vertical multilayer MoS2 spin-valve devices. These findings form a platform for exploring spin functionalities in 2D semiconductors and understanding the basic phenomenon that control their performance.

cond-mat.mtrl-sci↗

arXiv2017

Gate control of spin-polarized conductance in alloyed transition metal nano-contacts

To date, endeavors in nanoscale spintronics are dominated by the use of single-electron or single-spin transistors having at their heart a semiconductor, metallic or molecular quantum dot who's localized states are non-spin-degenerate and can be controlled by an external bias applied via a gate electrode. Adjusting the bias of the gate one can realign those states with respect to the chemical potentials of the leads and thus tailor the spin-polarized transmission properties of the device. Here we show that similar functionality can be achieved in a purely metallic junction comprised of a metallic magnetic chains attached to metallic paramagnetic leads and biased by a gate electrode. Our ab initio calculations of electron transport through mixed Pt-Fe (Fe-Pd and Fe-Rh) atomic chains suspended between Pt (Pd and Rh) electrodes show that spin-polarized confined states of the chain can be shifted by the gate bias causing a change in the relative contributions of majority and minority channels to the nano-contact's conductance. As a result, we observe strong dependence of conductance spin-polarization on the applied gate potential. In some cases the spin-polarization of conductance can even be reversed in sign upon gate potential application, which is a remarkable and promising trait for spintronic applications.

cond-mat.mes-hall↗

arXiv2017

Quantum transport simulation scheme including strong correlations and its application to organic radicals adsorbed on gold

We present a computational method to quantitatively describe the linear-response conductance of nanoscale devices in the Kondo regime. This method relies on a projection scheme to extract an Anderson impurity model from the results of density functional theory and non-equilibrium Green's functions calculations. The Anderson impurity model is then solved by continuous time quantum Monte Carlo. The developed formalism allows us to separate the different contributions to the transport, including coherent or non-coherent transport channels, and also the quantum interference between impurity and background transmission. We apply the method to a scanning tunneling microscope setup for the 1,3,5-triphenyl-6-oxoverdazyl (TOV) stable radical molecule adsorbed on gold. The TOV molecule has one unpaired electron, which when brought in contact with metal electrodes behaves like a prototypical single Anderson impurity. We evaluate the Kondo temperature, the finite temperature spectral function and transport properties, finding good agreement with published experimental results.

cond-mat.mes-hall↗

arXiv2016

First-principles spin-transfer torque in CuMnAs$|$GaP$|$CuMnAs junctions

We demonstrate that an all-antiferromagnetic tunnel junction with current perpendicular to the plane geometry can be used as an efficient spintronics device with potential high frequency operation. By using state-of-the-art density functional theory combined with quantum transport, we show that the Néel vector of the electrodes can be manipulated by spin-transfer torque. This is staggered over the two different magnetic sublattices and can generate dynamics and switching. At the same time the different magnetization states of the junction can be read by standard tunnelling magnetoresistance. Calculations are performed for CuMnAs$|$GaP$|$CuMnAs junctions with different surface terminations between the anti-ferromagnetic CuMnAs electrodes and the insulating GaP spacer. In particular we find that the torque remains staggered regardless of the termination, while the magnetoresistance depends on the microscopic details of the interface.

cond-mat.mes-hall↗

arXiv2016

Oxygen modulated quantum conductance for ultra-thin HfO$_2$-based memristive switching devices

Memristive switching devices, candidates for resistive random access memory technology, have been shown to switch off through a progression of states with quantized conductance and subsequent non-integer conductance (in terms of conductance quantum $G_0$). We have performed calculations based on density functional theory to model the switching process for a Pt-HfO$_2$-Pt structure, involving the movement of one or two oxygen atoms. Oxygen atoms moving within a conductive oxygen vacancy filament act as tunneling barriers, and partition the filament into weakly coupled quantum wells. We show that the low-bias conductance decreases exponentially when one oxygen atom moves away from interface. Our results demonstrate the high sensitivity of the device conductance to the position of oxygen atoms.

cond-mat.mes-hall↗

arXiv2016

Femtosecond spin current pulses generated by the non-thermal spin-dependent Seebeck effect and interacting with ferromagnets in spin valves

Using the sensitivity of magneto-induced second harmonic generation to spin currents (SC), we demonstrate in Fe/Au/Fe/MgO(001) pseudo spin valves the generation of 250 fs-long SC pulses. Their temporal profile indicates that superdiffusive hot electron transport across a sub-100~nm Au layer is close to the ballistic limit and the pulse duration is primarily determined by the thermalization time of laser-excited hot carriers in Fe. Considering the calculated spin-dependent Fe/Au interface transmittance we conclude that a non-thermal spin-dependent Seebeck effect is responsible for the generation of ultrashort SC pulses. We also show that hot electron spins rotate upon interaction with non-collinear magnetization at the Au/Fe interface, which holds high potential for future spintronic devices.

physics.optics↗

arXiv2015

Spin-valve Effect in NiFe/MoS2/NiFe Junctions

Two-dimensional (2D) layered transition metal dichalcogenides (TMDs) have been recently proposed as appealing candidate materials for spintronic applications owing to their distinctive atomic crystal structure and exotic physical properties arising from the large bonding anisotropy. Here we introduce the first MoS2-based spin-valves that employ monolayer MoS2 as the nonmagnetic spacer. In contrast with what expected from the semiconducting band-structure of MoS2, the vertically sandwiched-MoS2 layers exhibit metallic behavior. This originates from their strong hybridization with the Ni and Fe atoms of the Permalloy (Py) electrode. The spin-valve effect is observed up to 240 K, with the highest magnetoresistance (MR) up to 0.73% at low temperatures. The experimental work is accompanied by the first principle electron transport calculations, which reveal an MR of ~ 9% for an ideal Py/MoS2/Py junction. Our results clearly identify TMDs as a promising spacer compound in magnetic tunnel junctions and may open a new avenue for the TMDs-based spintronic applications.

cond-mat.mtrl-sci↗

arXiv2015

Single atom anisotropic magnetoresistance on a topological insulator surface

We demonstrate single atom anisotropic magnetoresistance on the surface of a topological insulator, arising from the interplay between the helical spin-momentum-locked surface electronic structure and the hybridization of the magnetic adatom states. Our first-principles quantum transport calculations based on density functional theory for Mn on Bi$_2$Se$_3$ elucidate the underlying mechanism. We complement our findings with a two dimensional model valid for both single adatoms and magnetic clusters, which leads to a proposed device setup for experimental realization. Our results provide an explanation for the conflicting scattering experiments on magnetic adatoms on topological insulator surfaces, and reveal the real space spin texture around the magnetic impurity.

cond-mat.mes-hall↗

arXiv2015

Electronic and magnetic properties of Ti4O7 predicted by self-interaction corrected density functional theory

Understanding electronic properties of sub-stoichiometric phases of titanium oxide such as Magnéli phase Ti4O7 is crucial in designing and modeling resistive switching devices. Here we present our study on Magnéli phase Ti4O7 together with rutile TiO2 and Ti2O3 using density functional theory methods with atomic-orbital-based self-interaction correction (ASIC). We predict a new antiferromagnetic ground state in the low temperature phase (or LT phase), and we explain energy difference with a competing antiferromagnetic state using a Heisenberg model. The predicted energy ordering of these states in the LT phase is calculated to be robust in a wide range of modeled isotropic strain. We have also investigated the dependence of the electronic structures of the Ti-O phases on stoichiometry. The splitting of titanium t2g orbitals is enhanced with increasing oxygen deficiency as Ti-O is reduced. The electronic properties of all these phases can be reasonably well described by applying ASIC with a standard value for transition metal oxides of the empirical parameter α of 0.5 representing the magnitude of the applied self-interaction correction.

cond-mat.mtrl-sci↗

arXiv2014

Ab-initio transport across Bismuth Selenide surface barriers

We investigate the effect of potential barriers in the form of step edges on the scattering properties of Bi$_2$Se$_3$(111) topological surface states by means of large-scale ab-initio transport simulations. Our results demonstrate the suppression of perfect backscattering, while all other scattering processes, which do not entail a complete spin and momentum reversal, are allowed. Furthermore, we find that the spin of the surface state develops an out of plane component as it traverses the barrier. Our calculations reveal the existence of quasi-bound states in the vicinity of the surface barriers, which appear in the form of an enhanced density of states in the energy window corresponding to the topological state. For double barriers we demonstrate the formation of quantum well states. To complement our first-principles results we construct a two-dimensional low-energy effective model and show that band bending plays a significant role in the scattering process. Our findings are discussed in the context of a number of recent experimental works.

cond-mat.mes-hall↗

arXiv2014

Phenomenology of Andreev reflection from first-principles transport theory

We study Andreev reflection in normal metal-superconductor junctions by using an extended Blonder-Tinkham-Klapwijk model combined with transport calculations based on density functional theory. Starting from a parameter-free description of the underlying electronic structure, we perform a detailed investigation of normal metal-superconductor junctions, as the separation between the superconductor and the normal metal is varied. The results are interpreted by means of transverse momentum resolved calculations, which allow us to examine the contributions arising from different regions of the Brillouin zone. Furthermore we investigate the effect of a voltage bias on the normal metal-superconductor conductance spectra. Finally, we consider Andreev reflection in carbon nanotubes sandwiched between normal and superconducting electrodes.

cond-mat.mes-hall↗

arXiv2014

Stretching of BDT-gold molecular junctions: thiol or thiolate termination?

It is often assumed that the hydrogen atoms in the thiol groups of a benzene-1,4-dithiol dissociate when Au-benzene-1,4-dithiol-Au junctions are formed. We demonstrate, by stability and transport properties calculations, that this assumption can not be made. We show that the dissociative adsorption of methanethiol and benzene-1,4-dithiol molecules on a flat Au(111) surface is energetically unfavorable and that the activation barrier for this reaction is as high as 1 eV. For the molecule in the junction, our results show, for all electrode geometries studied, that the thiol junctions are energetically more stable than their thiolate counterparts. Due to the fact that density functional theory (DFT) within the local density approximation (LDA) underestimates the energy difference between the lowest unoccupied molecular orbital and the highest occupied molecular orbital by several electron-volts, and that it does not capture the renormalization of the energy levels due to the image charge effect, the conductance of the Au-benzene-1,4-dithiol-Au junctions is overestimated. After taking into account corrections due to image charge effects by means of constrained-DFT calculations and electrostatic classical models, we apply a scissor operator to correct the DFT energy levels positions, and calculate the transport properties of the thiol and thiolate molecular junctions as a function of the electrodes separation.

cond-mat.mes-hall↗

arXiv2014

Efficient spin injection and giant magnetoresistance in Fe/MoS$_2$/Fe junctions

We demonstrate giant magnetoresistance in Fe/MoS$_2$/Fe junctions by means of \textit{ab-initio} transport calculations. We show that junctions incorporating either a mono- or a bi-layer of MoS$_2$ are metallic and that Fe acts as an efficient spin injector into MoS$_2$ with an efficiency of about 45\%. This is the result of the strong coupling between the Fe and S atoms at the interface. For junctions of greater thickness a maximum magnetoresistance of $\sim$300\% is obtained, which remains robust with the applied bias as long as transport is in the tunneling limit. A general recipe for improving the magnetoresistance in spin valves incorporating layered transition metal dichalcogenides is proposed.

cond-mat.mes-hall↗

arXiv2013

Ab-initio study on the possible doping strategies for MoS$_2$ monolayers

Density functional theory is used to systematically study the electronic and magnetic properties of doped MoS$_2$ monolayers, where the dopants are incorporated both via S/Mo substitution or as adsorbates. Among the possible substitutional dopants at the Mo site, Nb is identified as suitable p-type dopant, while Re is the donor with the lowest activation energy. When dopants are simply adsorbed on a monolayer we find that alkali metals shift the Fermi energy into the MoS$_2$ conduction band, making the system n-type. Finally, the adsorption of charged molecules is considered, mimicking an ionic liquid environment. We find that molecules adsorption can lead to both n- and p-type conductivity, depending on the charge polarity of the adsorbed species.

cond-mat.mtrl-sci↗

arXiv2013

Atomistic Simulations of Highly Conductive Molecular Transport Junctions Under Realistic Conditions

We report state-of-the-art atomistic simulations combined with high-fidelity conductance calculations to probe structure-conductance relationships in Au-benzenedithiolate(BDT)-Au junctions under elongation. Our results demonstrate that large increases in conductance are associated with the formation of monatomic chains (MACs) of Au atoms directly connected to BDT. An analysis of the electronic structure of the simulated junctions reveals that enhancement in the s-like states in Au MACs causes the increases in conductance. Other structures also result in increased conductance but are too short-lived to be detected in experiment, while MACs remain stable for long simulation times. Examinations of thermally evolved junctions with and without MACs show negligible overlap between conductance histograms, indicating that the increase in conductance is related to this unique structural change and not thermal fluctuation. These results, which provide an excellent explanation for a recently observed anomalous experimental result [Bruot et al., Nature Nanotech., 2012, 7, 35-40], should aid in the development of mechanically responsive molecular electronic devices.

cond-mat.mes-hall↗

arXiv2013

Structural Origins of Conductance Fluctuations in Gold-Thiolate Molecular Transport Junctions

We report detailed atomistic simulations combined with high-fidelity conductance calculations to probe the structural origins of conductance fluctuations in thermally evolving Au-benzene-1,4-dithiolate-Au junctions. We compare the behavior of structurally ideal junctions (electrodes with flat surfaces) to structurally realistic, experimentally representative junctions resulting from break junction simulations. The enhanced mobility of metal atoms in structurally realistic junctions results in significant changes to the magnitude and origin of the conductance fluctuations. Fluctuations are larger by a factor of 2-3 in realistic junctions compared to ideal junctions. Moreover, in junctions with highly deformed electrodes, the conductance fluctuations arise primarily from changes in the Au geometry, in contrast to results for junctions with non-deformed electrodes, where the conductance fluctuations are dominated by changes in the molecule geometry. These results provide important guidance to experimentalists developing strategies to control molecular conductance for device applications, and also to theoreticians invoking simplified structural models of junctions to predict their behavior.

cond-mat.mes-hall↗

arXiv2013

Origin of the n-type and p-type conductivity of MoS2 monolayers on a SiO2 substrate

Ab-initio density functional theory calculations are performed to study the electronic properties of a MoS2 monolayer deposited over a SiO2 substrate in the presence of interface impurities and defects. When MoS2 is placed on a defect-free substrate the oxide plays an insignificant role, since the conduction band top and the valence band minimum of MoS2 are located approximately in the middle of the SiO2 band-gap. However, if Na impurities and O dangling bonds are introduced at the SiO2 surface, these lead to localized states, which modulate the conductivity of the MoS2 monolayer from n- to p-type. Our results show that the conductive properties of MoS2 deposited on SiO2 are mainly determined by the detailed structure of the MoS2 /SiO2 interface, and suggest that doping the substrate can represent a viable strategy for engineering MoS2 -based devices.

cond-mat.mtrl-sci↗