arXiv subjects

Ivan V. Bazarov

Publications and source records attributed to Ivan V. Bazarov.

7 recordsLinked to original sources

arXiv2020

The Role of Low Intrinsic Emittance in Modern Photoinjector Brightness

Reducing the intrinsic emittance of photocathodes is one of the most promising routes to improving the brightness of electron sources. However, when emittance growth occurs during beam transport (for example, due to space-charge), it is possible that this emittance growth overwhelms the contribution of the photocathode and, thus, in this case source emittance improvements are not beneficial. Using multi-objective genetic optimization, we investigate the role intrinsic emittance plays in determining the final emittance of several space-charge dominated photoinjectors, including those for high repetition rate free electron lasers and ultrafast electron diffraction. We introduce a new metric to predict the scale of photocathode emittance improvements that remain beneficial and explain how additional tuning is required to take full advantage of new photocathode technologies. Additionally, we determine the scale of emittance growth due to point-to-point Coulomb interactions with a fast tree-based space-charge solver. Our results show that in the realistic high brightness photoinjector applications under study, the reduction of thermal emittance to values as low as 50 pm/um (1 meV MTE) remains a viable option for the improvement of beam brightness.

physics.acc-ph↗

arXiv2019

Online storage ring optimization using dimension-reduction and genetic algorithms

Particle storage rings are a rich application domain for online optimization algorithms. The Cornell Electron Storage Ring (CESR) has hundreds of independently powered magnets, making it a high-dimensional test-problem for algorithmic tuning. We investigate algorithms that restrict the search space to a small number of linear combinations of parameters ("knobs") which contain most of the effect on our chosen objective (the vertical emittance), thus enabling efficient tuning. We report experimental tests at CESR that use dimension-reduction techniques to transform an 81-dimensional space to an 8-dimensional one which may be efficiently minimized using one-dimensional parameter scans. We also report an experimental test of a multi-objective genetic algorithm using these knobs that results in emittance improvements comparable to state-of-the-art algorithms, but with increased control over orbit errors.

physics.acc-ph↗

arXiv2017

Using Sloppy Models for Constrained Emittance Minimization at the Cornell Electron Storage Ring (CESR)

In order to minimize the emittance at the Cornell Electron Storage Ring (CESR), we measure and correct the orbit, dispersion, and transverse coupling of the beam. However, this method is limited by finite measurement resolution of the dispersion, and so a new procedure must be used to further reduce the emittance due to dispersion. In order to achieve this, we use a method based upon the theory of sloppy models. We use a model of the accelerator to create the Hessian matrix which encodes the effects of various corrector magnets on the vertical emittance. A singular value decomposition of this matrix yields the magnet combinations which have the greatest effect on the emittance. We can then adjust these magnet "knobs" sequentially in order to decrease the dispersion and the emittance. We present here comparisons of the effectiveness of this procedure in both experiment and simulation using a variety of CESR lattices. We also discuss techniques to minimize changes to parameters we have already corrected.

physics.acc-ph↗

arXiv2011

Comparison of DC and SRF Photoemission Guns For High Brightness High Average Current Beam Production

A comparison of the two most prominent electron sources of high average current high brightness electron beams, DC and superconducting RF photoemission guns, is carried out using a large-scale multivariate genetic optimizer interfaced with space charge simulation codes. The gun geometry for each case is varied concurrently with laser pulse shape and parameters of the downstream beamline elements of the photoinjector to obtain minimum emittance as a function of bunch charge. Realistic constraints are imposed on maximum field values for the two gun types. The SRF and DC gun emittances and beam envelopes are compared for various values of photocathode thermal emittance. The performance of the two systems is found to be largely comparable provided low intrinsic emittance photocathodes can be employed.

physics.acc-ph↗

arXiv2008

Benchmarking of 3D space charge codes using direct phase space measurements from photoemission high voltage DC gun

We present a comparison between space charge calculations and direct measurements of the transverse phase space for space charge dominated electron bunches after a high voltage photoemission DC gun followed by an emittance compensation solenoid magnet. The measurements were performed using a double-slit setup for a set of parameters such as charge per bunch and the solenoid current. The data is compared with detailed simulations using 3D space charge codes GPT and Parmela3D with initial particle distributions created from the measured transverse and temporal laser profiles. Beam brightness as a function of beam fraction is calculated for the measured phase space maps and found to approach the theoretical maximum set by the thermal energy and accelerating field at the photocathode.

physics.acc-ph↗

arXiv2005

Recirculating BBU thresholds for polarized HOMs with optical coupling

We will derive the general theory of the beam-breakup instability in recirculating linear accelerators with coupled beam optics and with polarized higher order dipole modes. The bunches do not have to be at the same RF phase during each recirculation turn. This is important for the description of energy recovery linacs (ERLs) where beam currents become very large and coupled optics are used on purpose to increase the threshold current. A remarkable agreement with tracking data is demonstrated. The general formulas are then analyzed for several analytically solvable cases, which show: (a) Why different higher order modes (HOM) in one cavity can couple and cannot be considered individually, even when their frequencies are separated by much more than the resonance widths of the HOMs. For the Cornell ERL as an example, it is noted that optimum advantage of coupled optics is taken when the cavities are designed with an $x$-$y$ HOM frequency splitting of above 50MHz. The threshold current is then far above the design current of this accelerator. (b) How the $x$-$y$ coupling in the particle optics determines when modes can be considered separately. (c) That the increase of the threshold current obtainable by coupled optics and polarized modes diminishes roughly with the square root of the HOMs' quality factors. Therefore the largest advantages are achieved with cavities that are not specifically designed to minimize these quality factors, e.g. by means of HOM absorbers. (d) How multiple-turn recirculation interferes with the threshold improvements obtained with a coupled optics.

physics.acc-ph↗

arXiv2004

Beam-Breakup Instability Theory for Energy Recovery Linacs

Here we will derive the general theory of the beam-breakup instability in recirculating linear accelerators, in which the bunches do not have to be at the same RF phase during each recirculation turn. This is important for the description of energy recovery linacs (ERLs) where bunches are recirculated at a decelerating phase of the RF wave and for other recirculator arrangements where different RF phases are of an advantage. Furthermore it can be used for the analysis of phase errors of recirculated bunches. It is shown how the threshold current for a given linac can be computed and a remarkable agreement with tracking data is demonstrated. The general formulas are then analyzed for several analytically solvable cases, which show: (a) Why different higher order modes (HOM) in one cavity do not couple so that the most dangerous modes can be considered individually. (b) How different HOM frequencies have to be in order to consider them separately. (c) That no optics can cause the HOMs of two cavities to cancel. (d) How an optics can avoid the addition of the instabilities of two cavities. (e) How a HOM in a multiple-turn recirculator interferes with itself. Furthermore, a simple method to compute the orbit deviations produced by cavity misalignments has also been introduced. It is shown that the BBU instability always occurs before the orbit excursion becomes very large.

physics.acc-ph↗