Iwona Jóźwik | Searcharxiv

arXiv2026

Preliminary Structural Study of Chromium Coatings for Nuclear Applications

Following the Fukushima Daiichi disaster, an increasing number of studies concentrate on the development of Accident Tolerant Fuel (ATF) cladding materials for nuclear fuel, aiming to prevent the oxidation of zirconium during incidents such as Loss of Coolant Accident (LOCA) and to effectively lower the amount of heat and hydrogen released during emergency core cooling (ECC). Zirconium alloy cladding with a protective chromium (Cr) coating is considered one of the promising candidates, largely due to its relatively short timeline for deployment in nuclear power plants. In this study, Cr-coated and uncoated Zircaloy-4 claddings were evaluated using high temperature X-ray diffraction (HT-XRD) in vacuum over a temperature range from RT to 1100oC. The temperatures corresponding to the formation of oxide phases are >200oC and >600oC for the uncoated and Cr-coated samples, respectively. SEM and TEM characterisation of the sub-surface in Cr-coated specimen after HT-XRD revealed Fe segregation, formation of Zr(Fe,Cr)2 Laves phase and nano-bubbles at the former Cr / Z4 interface.

cond-mat.mtrl-sci↗

arXiv2022

Detection of the onset of yielding and creep failure from digital image correlation

There are a multitude of applications in which structural materials would be desired to be nondestructively evaluated, while in a component, for plasticity and failure characteristics. In this way, safety and resilience features can be significantly improved. Nevertheless, while failure can be visible through cracks, plasticity is commonly invisible and highly microstructure-dependent. Here, we show that an equation-free method based on principal component analysis is capable of detecting yielding and tertiary creep onset, directly from strain fields that are obtained by digital image correlation, applicable on components, continuously and nondestructively. We demonstrate the applicability of the method to yielding of Ni-based Haynes 230 metal alloy polycrystalline samples, which are also characterized through electron microscopy and benchmarked using continuum polycrystalline plasticity modeling. Also, we successfully apply this method to yielding during uniaxial tension of Hastelloy X polycrystalline samples, and also to the onset of tertiary creep in quasibrittle fiber composites under uniaxial tension. We conclude that there are key features in the spatiotemporal fluctuations of local strain fields that can be used to infer mechanical properties.

cond-mat.mtrl-sci↗