arXiv subjects

Jérôme Laurent

Publications and source records attributed to Jérôme Laurent.

17 recordsLinked to original sources

arXiv2026

Adiabatic Lamb modes in 3D tapered waveguides: Cut-off effects and ZGV resonances

This paper aims to enhance our understanding of the physical behavior of adiabatic modes in inhomogeneous elastic plates, particularly their remarkable capacity to adapt to gradual perturbations. The study investigates the propagation characteristics of higher-order adiabatic Lamb modes in waveguides with linearly varying thickness, with a focus on the influence of critical thicknesses on their propagation. This is achieved by leveraging the broadband excitation capabilities of a pulsed laser generating higher order Lamb modes to reveal various critical thicknesses, such as the cut-off and Zero-Group Velocity (ZGV) thicknesses. Remarkably, ZGV resonances can be induced at locations well beyond the laser source. Moreover, the mode's behavior is strongly influenced by thickness variations in all directions, imparting the plate an anisotropic-like behavior. Additionally, based on the observed effects, our experimental approach enables precise reconstruction of elastic waveguide profiles in additively manufactured aluminum plates with such thickness variations. The reconstructed profiles show a strong correlation with reference measurements across the scanned area.

physics.class-ph↗

arXiv2026

Tunneling of Elastic Waves in a Tapered Waveguide

Understanding how evanescent modes mediate energy transfer in tapered elastic waveguides is of paramount interest, as it unlocks new strategies for wave control and manipulation. Evanescent modes play a crucial role in energy localization and in the emergence of thickness resonances. We report the first unambiguous experimental evidence of Lamb mode tunneling near turning points, revealing how energy can traverse an evanescent barrier and recover its propagative nature after a finite transit time. Focusing on waveguides with linearly varying thickness, we show that the $S_2$ mode becomes evanescent over a narrow frequency band, enabling a tunnelinglike phenomenon. Our study demonstrates that the barrier width is governed by the elastic properties of the material, particularly the Poisson's ratio, within a confined range bordering the Dirac cone. Numerical results exhibit excellent agreement with predictions from the Wentzel-Kramers-Brillouin approximation. These findings provide compelling evidence that, for a specific barrier width, evanescent modes mediate energy transfer across regions classically forbidden to propagating waves, revealing the mechanisms governing transmission, localization, and mode conversion in structured or corrugated elastic waveguides.

physics.class-ph↗

arXiv2022

Cloaking, Trapping and Superlensing of Lamb Waves with Negative Refraction

We report on experimental and numerical implementations of devices based on the negative refraction of elastic guided waves, the so-called Lamb waves. Consisting in plates of varying thickness, these devices rely on the concept of complementary media, where a particular layout of negative index media can cloak an object with its anti-object or trap waves around a negative corner. The diffraction cancellation operated by negative refraction is investigated by means of laser ultrasound experiments. However, unlike original theoretical predictions, these intriguing wave phenomena remain, nevertheless, limited to the propagating component of the wave-field. To go beyond the diffraction limit, negative refraction is combined with the concept of metalens, a device converting the evanescent components of an object into propagating waves. The transport of an evanescent wave-field is then possible from an object plane to a far-field imaging plane. Twenty years after Pendry's initial proposal, this work thus paves the way towards an elastic superlens.

physics.class-ph↗

arXiv2019

In-plane backward and Zero-Group-Velocity guided modes in rigid and soft strips

Elastic waves guided along bars of rectangular cross section exhibit complex dispersion. This paper studies in-plane modes propagating at low frequencies in thin isotropic rectangular waveguides through experiments and numerical simulations. These modes result from the coupling at the edge between the first order shear horizontal mode $SH_0$ of phase velocity equal to the shear velocity $V_T$ and the first order symmetrical Lamb mode $S_0$ of phase velocity equal to the plate velocity $V_P$. In the low frequency domain, the dispersion curves of these modes are close to those of Lamb modes propagating in plates of bulk wave velocities $V_P$ and $V_T$. The dispersion curves of backward modes and the associated ZGV resonances are measured in a metal tape using non-contact laser ultrasonic techniques. Numerical calculations of in-plane modes in a soft ribbon of Poisson's ratio $ν\approx 0.5$ confirm that, due to very low shear velocity, backward waves and zero group velocity modes exist at frequencies that are hundreds of times lower than ZGV resonances in metal tapes of the same geometry. The results are compared to theoretical dispersion curves calculated using the method provided in Krushynska and Meleshko (J. Acoust. Soc. Am $129$, 2011).

physics.class-ph↗

arXiv2019

Negative reflection of elastic guided waves in chaotic and random scattering media

The propagation of waves in complex media can be harnessed either by taming the incident wave-field impinging on the medium or by forcing waves along desired paths through its careful design. These two alternative strategies have given rise to fascinating concepts such as time reversal or negative refraction. Here, we show how these two processes are intimately linked through the negative reflection phenomenon. A negative reflecting mirror converts a wave of positive phase velocity into its negative counterpart and vice versa. In this article, we experimentally demonstrate this phenomenon with elastic waves in a 2D billiard and in a disordered plate by means of laser interferometry. Despite the complexity of such configurations, the negatively reflected wave field focuses back towards the initial source location, thereby mimicking a phase conjugation operation while being a fully passive process. The super-focusing capability of negative reflection is also highlighted in a monochromatic regime. The negative reflection phenomenon is not restricted to guided elastic waves since it can occur in zero-gap systems such as photonic crystals, chiral metamaterials or graphene. Negative reflection can thus become a tool of choice for the control of waves in all fields of wave physics.

cond-mat.mtrl-sci↗

arXiv2019

Imaging Gigahertz Zero-Group-Velocity Lamb Waves

We image GHz zero-group-velocity (ZGV) Lamb waves in the time domain by means of an ultrafast optical technique, revealing their stationary nature and their acoustic energy localization in two dimensions. The acoustic field is imaged to micron resolution on a nanoscale bilayer consisting of a silicon-nitride plate coated with a titanium film. Temporal and spatiotemporal Fourier transforms combined with a technique involving the intensity modulation of the optical pump and probe beams gives access to arbitrary acoustic frequencies, allowing ZGV modes to be isolated. The dispersion curves of the bilayer system are extracted together with the Q factor and lifetime of the first ZGV mode. Applications include the testing of bonded nanostructures.

physics.app-ph↗

arXiv2018

Negative refraction of Lamb modes: A theoretical study

This paper provides a theoretical investigation of negative refraction and focusing of elastic guided waves in a free-standing plate with a step-like thickness change. Under certain conditions, a positive phase velocity (forward) Lamb mode can be converted into a negative phase velocity (backward) mode at such interface, giving rise to negative refraction. A semi-analytical model is developed in order to study the influence of various parameters such as the material Poisson's coefficient, the step-like thickness, the frequency and the incidence angle. To this end, all the Lamb and shear horizontal propagating modes, but also a large number of their inhomogeneous and evanescent counterpart,s are taken into account. The boundary conditions applied to the stress-displacement fields at the thickness step yields an equation system. Its inversion provides the transmission and reflection coefficients between each mode at the interface. The step-like thickness and Poisson's ratio are shown to be key parameters to optimize the negative refraction process. In terms of material, Duralumin is found to be optimal as it leads to a nearly perfect conversion between forward and backward modes over broad frequency and angular ranges. An excellent focusing ability is thus predicted for a flat lens made of two symmetric thickness steps. Theoretical results are confirmed by a numerical FDTD simulation and experimental measurements made on an optimized Duralumin flat lens by means of laser interferometry. This theoretical study paves the way towards the optimization of elastic devices based on negative refraction, in particular for cloaking or super-focusing purposes.

physics.class-ph↗

arXiv2016

Laser beam shaping for enhanced Zero-Group Velocity Lamb modes generation

Optimization of Lamb modes induced by laser can be achieved by adjusting the spatial source distribution to the mode wavelength ($λ$). The excitability of Zero-Group Velocity (ZGV) resonances in isotropic plates is investigated both theoretically and experimentally for axially symmetric sources. Optimal parameters and amplitude gains are derived analytically for spot and annular sources of either Gaussian or rectangular energy profiles. For a Gaussian spot source, the optimal radius is found to be $λ_{ZGV}/π$. Annular sources increase the amplitude by at least a factor of 3 compared to the optimal Gaussian source. Rectangular energy profiles provide higher gain than Gaussian ones. These predictions are confirmed by semi-analytical simulation of the thermoelastic generation of Lamb waves, including the effect of material attenuation. Experimentally, Gaussian ring sources of controlled width and radius are produced with an axicon-lens system. Measured optimal geometric parameters obtained for Gaussian and annular beams are in good agreement with theoretical predictions. A ZGV resonance amplification factor of 2.1 is obtained with the Gaussian ring. Such source should facilitate the inspection of highly attenuating plates made of low ablation threshold materials like composites.

physics.optics↗

arXiv2016

Particlelike wave packets in complex scattering systems

A wave packet undergoes a strong spatial and temporal dispersion while propagating through a complex medium. This wave scattering is often seen as a nightmare in wave physics whether it be for focusing, imaging or communication purposes. Controlling wave propagation through complex systems is thus of fundamental interest in many areas, ranging from optics or acoustics to medical imaging or telecommunications. Here, we study the propagation of elastic waves in a cavity and a disordered waveguide by means of laser interferometry. From the direct experimental access to the time-delay matrix of these systems, we demonstrate the existence of particle-like wave packets that remain focused in time and space throughout their complex trajectory. Due to their limited dispersion, their selective excitation will be crucially relevant for all applications involving selective wave focusing and efficient information transfer through complex media.

physics.optics↗

arXiv2016

Negative reflection of Lamb waves at a free edge: tunable focusing and mimicking phase conjugation

The paper studies the interaction of Lamb waves with the free edge of a plate. The reflection coefficients of a Lamb mode at a plate free edge are calculated using a semi-analytical method, as a function of frequency and angle of incidence. The conversion between forward and backward Lamb modes is thoroughly investigated. It is shown that, at the zero-group velocity (ZGV) frequency, the forward $S_1$ Lamb mode fully converts into the backward $S_{2b}$ Lamb mode at normal incidence. Besides, this conversion is very efficient over most of the angular spectrum and remains dominant at frequencies just above the ZGV-point. This effect is observed experimentally on a Duralumin plate. Firstly, the $S_1$ Lamb mode is selectively generated using a transducer array, secondly the $S_{2b}$ mode is excited using a single circular transducer. The normal displacement field is probed with an interferometer. The free edge is shown to retro-focus the incident wave at different depths depending on the wave number mismatch between the forward and backward propagating modes. In the vicinity of the ZGV-point, wave numbers coincide and the wave is retro-reflected on the source. In this frequency range, the free edge acts as a perfect phase conjugating mirror.

cond-mat.mtrl-sci↗

arXiv2015

Investigation of interfacial stiffnesses of a tri-layer using Zero-Group Velocity Lamb modes

Zero-Group Velocity (ZGV) Lamb waves are studied in a structure composed of two plates bonded by an adhesive layer. The dispersion curves are calculated for a Duralumin/epoxy/Duralumin sample, where the adhesion is modeled by a normal and a tangential spring at both interfaces. Several ZGV modes are identified and their frequency dependence on interfacial stiffnesses and on the bonding layer thickness are numerically studied. Then, experiments achieved with laser ultrasonic techniques are presented. Local resonances are measured using superimposed source and probe. Knowing the thicknesses and elastic constants of the Duralumin and epoxy layers, the comparison between theoretical and experimental ZGV resonances leads to an evaluation of the interfacial stiffnesses. A good agreement with theoretical dispersion curves confirms the identification of the resonances and the parameter estimations. This non-contact technique is promising for the local evaluation of bonded structures.

cond-mat.mtrl-sci↗

arXiv2015

Laser induced Zero-Group Velocity resonances in Transversely Isotropic cylinder

The transient response of an elastic cylinder to a laser impact is studied. When the laser source is a line perpendicular to the cylinder axis, modes guided along the cylinder are generated. For a millimetric steel cylinder up to ten narrow resonances can be locally detected by laser interferometry below 8 MHz. Most of these resonances correspond to Zero-Group Velocity guided modes while a few others can be ascribed to thickness modes. We observe that the theory describing the propagation of elastic waves in an isotropic cylinder is not sufficient to precisely predict the resonance spectrum. In fact, the texture of such elongated structure manifest as elastic anisotropy. Thus, a transverse isotropic (TI) model is used to calculate the dispersion curves and compare them with the measured one, obtained by moving the source along the cylinder. The five elastic constants of a TI cylinder are adjusted leading to a good agreement between measured and theoretical dispersion curves. Then, all the resonance frequencies are satisfactorily identified.

cond-mat.mtrl-sci↗

arXiv2014

Full transmission and reflection of waves propagating through a maze of disorder

Thirty years ago, theorists showed that a properly designed combination of incident waves could be fully transmitted through (or reflected by) a disordered medium, based on the existence of propagation channels which are essentially either closed or open (bimodal law). In this Letter, we study elastic waves in a disordered waveguide and present direct experimental evidence of the bimodal law. Full transmission and reflection are achieved. The wave field is monitored by laser interferometry and highlights the interference effects that take place within the scattering medium.

cond-mat.dis-nn↗

arXiv2014

Temporal behavior of laser induced elastic plate resonances

This paper investigates the dependence on Poisson's ratio of local plate resonances in low attenuating materials. In our experiments, these resonances are generated by a pulse laser source and detected with a heterodyne interferometer measuring surface displacement normal to the plate. The laser impact induces a set of resonances that are dominated by Zero Group Velocity (ZGV) Lamb modes. For some Poisson's ratio, thickness-shear resonances are also detected. These experiments confirm that the temporal decay of ZGV modes follows a $t^{-0.5}$ law and show that the temporal decay of the thickness resonances is much faster. Similar decays are obtained by numerical simulations achieved with a finite difference code. A simple model is proposed to describe the thickness resonances. It predicts that a thickness mode decays as $t^{-1.5}$ for large times and that the resonance amplitude is proportional to $D^{-1.5}$ where $D$ is the curvature of the dispersion curve $ω(k)$ at $k=0$. This curvature depends on the order of the mode and on the Poisson's ratio, and it explains why some thickness resonances are well detected while others are not.

physics.class-ph↗

arXiv2014

Non contact probing of interfacial stiffnesses between two plates by Zero-Group Velocity Lamb modes

A non contact technique using Zero-Group Velocity (ZGV) Lamb modes is developed to probe the bonding between two solid plates coupled by a thin layer. The layer thickness is assumed to be negligible compared with the plate thickness and the acoustic wavelength. The coupling layer is modeled by a normal and a tangential spring to take into account the normal and shear interfacial stresses. Theoretical ZGV frequencies are determined for a symmetrical bi-layer structure and the effect of the interfacial stiffnesses on the cut-off and ZGV frequencies are evaluated. Experiments are conducted with two glass plates bonded by a drop of water, oil, or salol, leading to a few micrometer thick layer. An evaluation of normal and shear stiffnesses, is obtained using ZGV resonances locally excited and detected with laser ultrasonic techniques.

physics.class-ph↗

arXiv2014

Holographic imaging of surface acoustic waves

We report on an experimental demonstration of surface acoustic waves monitoring on a thin metal plate with heterodyne optical holography. Narrowband imaging of local optical pathlength modulation is achieved with a frequency-tunable time-averaged laser Doppler holographic imaging scheme on a sensor array, at video-rate. This method enables robust and quantitative mapping of out-of-plane vibrations of nanometric amplitudes at radiofrequencies.

physics.optics↗

arXiv2014

Non-destructive testing of composite plates by holographic vibrometry

We report on a wide-field optical monitoring method for revealing local delaminations in sandwich-type composite plates at video-rate by holographic vibrometry. Non-contact measurements of low frequency flexural waves is performed with time-averaged heterodyne holography. It enables narrowband imaging of local out-of-plane nanometric vibration amplitudes under sinusoidal excitation, and reveals delamination defects, which cause local resonances of flexural waves. The size of the defect can be estimated from the first resonance frequency of the flexural wave and the mechanical parameters of the observed layer of the composite plate.

physics.optics↗