arXiv subjects

Jürgen Koch

Publications and source records attributed to Jürgen Koch.

5 recordsLinked to original sources

arXiv2026

3D Printed Alumina as a Millimeter-Wave Optical Element

We present millimeter and sub-millimeter room temperature transmission and loss measurements of 3D printed alumina disc and of a disc with one-sided 3D printed sub-wavelength structures anti-reflection coatings (SWS-ARC). For four bands spanning 158 - 700~GHz we find an index of refraction consistent with $n= 3.107 \pm 0.007$. The loss over the entire frequency band between 158~GHz and 700~GHz spans $ 1 \cdot 10^{-3} \leq \tan δ\leq 2.49 \cdot 10^{-3}$ with 10%-30% uncertainty at the lower range of frequencies shrinking to $\sim\!2\%$ at the higher frequencies. As expected, constructive and destructive interference fringes that are apparent with the flat disc data are absent with the disc that has SWS-ARC. The measured data are consistent with finite element analysis predictions that are based on the measured shape of the SWS. At frequencies between 158~GHz and 200~GHz, below the onset of diffraction effects, reflectance is reduced from a maximum of 64% to about 25%, closely matching predictions. These measurements of the index, loss, and SWS-ARC of 3D printed alumina suggest that the material and fabrication technique could be useful for astrophysical applications.

astro-ph.IM↗

arXiv2026

Silicon-based vacuum window for millimeter and submillimeter-wave astrophysics

We designed, fabricated, and characterized the properties of a silicon-based vacuum window suitable for millimeter-wave astrophysical applications. The window, which has a diameter of 124 mm, optically active diameter of 68 mm, and thickness of about 4 mm, gives an average transmittance and reflectance of 99% and 1%, respectively, a fractional bandwidth of 67%. Absorptive loss is below the detection limit of our measurement. The anti-reflection coating is made with laser ablated sub-wavelength structures (SWS), and the measured transmittance and reflectance values agree with modeling based on the measured SWS shapes. The window has been integrated into DESHIMA v2.0, an astrophysics instrument that took year-long observations with the Atacama Submillimeter Telescope Experiment.

astro-ph.IM↗

arXiv2025

Prototype sub-wavelength structure anti-reflection coating on alumina filters for ground-based CMB telescopes

We present designs and fabrication of sub-wavelength anti-reflection (AR) structures on alumina for infrared absorptive filters with passbands near 30, 125, and 250 GHz. These bands are widely used by ground-based instruments measuring the cosmic microwave background radiation. The designs are tuned to provide reflectance of 2% or less for fractional bandwidths between 51% and 72%, with each of the three primary bands containing two sub-bands. We make the sub-wavelength structures (SWS), which resemble a two-dimensional array of pyramids, using laser ablation. We measure the shapes of the fabricated pyramids and show that for incidence angles up to 20 degrees the predicted in-band average reflectance is 2% or less, in agreement with the design. The band average instrumental polarization is less than $3\times 10^{-3}$.

astro-ph.IM↗

arXiv2017

Broadband Millimeter-Wave Anti-Reflection Coatings on Silicon Using Pyramidal Sub-Wavelength Structures

We used two novel approaches to produce sub-wavelength structure (SWS) anti-reflection coatings (ARC) on silicon for the millimeter and sub-millimeter (MSM) wave band: picosecond laser ablation and dicing with beveled saws. We produced pyramidal structures with both techniques. The diced sample, machined on only one side, had pitch and height of 350 $μ$m and 972 $μ$m. The two laser ablated samples had pitch of 180 $μ$m and heights of 720 $μ$m and 580 $μ$m; only one of these samples was ablated on both sides. We present measurements of shape and optical performance as well as comparisons to the optical performance predicted using finite element analysis and rigorous coupled wave analysis. By extending the measured performance of the one-sided diced sample to the two-sided case, we demonstrate 25 % band averaged reflectance of less than 5 % over a bandwidth of 97 % centered on 170 GHz. Using the two-sided laser ablation sample, we demonstrate reflectance less than 5 % over 83 % bandwidth centered on 346 GHz.

astro-ph.IM↗

arXiv2016

Millimeter-Wave Broadband Anti-Reflection Coatings Using Laser Ablation of Sub-Wavelength Structures

We report on the first use of laser ablation to make sub-millimeter, broad-band, anti-reflection coatings (ARC) based on sub-wavelength structures (SWS) on alumina and sapphire. We used a 515 nm laser to produce pyramid-shaped structures with pitch of about 320 $μ$m and total height of near 800 $μ$m. Transmission measurements between 70 and 140 GHz are in agreement with simulations using electromagnetic propagation software. The simulations indicate that SWS ARC with the fabricated shape should have a fractional bandwidth response of $Δν/ ν_{center}\ = 0.55$ centered on 235 GHz for which reflections are below 3%. Extension of the bandwidth to both lower and higher frequencies, between few tens of GHz and few THz, should be straightforward with appropriate adjustment of laser ablation parameters.

astro-ph.IM↗