SearcharxivSearch

arXiv subjects

J-F. Glicenstein

Publications and source records attributed to J-F. Glicenstein.

16 recordsLinked to original sources

Timing performances of NectarCAM, a Medium Sized Telescope Camera for the Cherenkov Telescope Array

NectarCAM is a Cherenkov camera that will be installed on Medium-Sized Telescopes of the northern array of the Cherenkov Telescope Array Observatory (CTAO). It is composed of 265 modules, each of which includes 7 photo-multiplier tubes, a Front-End Board and a camera trigger system for data collection. The first NectarCAM unit is currently being integrated at CEA Paris-Saclay in France. Once installed at the CTAO's northern site, the NectarCAM's timing abilities will be crucial for reducing noise in images, improving image cleaning, and distinguishing between gamma-ray photons and cosmic-ray background. Additionally, it will enable coincidence identification with neighboring telescopes for stereoscopic observations. The timing system of NectarCAM has been tested in a dark room with various light sources. The results of the tests, including timing precision and accuracy of the trigger arrival relative to a laser source, and the timing of individual and multiple pixel signals, will be presented.

astro-ph.IM

The NectarCAM Timing System

NectarCAM is a Cherenkov camera which is going to equip the Medium-Sized Telescopes (MST) of the northern site of the Cherenkov Telescope Array Observatory (CTAO). NectarCAM is equipped with 265 modules, each consisting of 7 photo-multiplier tubes (PMTs), a Front-End Board and a local camera trigger system used for data acquisition. This paper addresses the timing performance of NectarCAM which are crucial to reduce the noise in shower images and improve image cleaning as well as to discriminate between gamma-ray photons and cosmic-ray background and finally to allow coincidence identification with neighbouring telescopes for stereoscopic operations. Verification tests of the system have been performed in a dark room using various light sources to illuminate the first NectarCAM unit. The resulting timing precision and accuracy of the trigger arrival relative to a laser source, of individual and multiple pixel signals have been studied and are shown to comply to CTAO requirements.

astro-ph.IM

Status of the Davies-Cotton and Schwarzschild-Couder Medium-Sized Telescopes for the Cherenkov Telescope Array

The Cherenkov Telescope Array is an observatory dedicated to very high energy gamma rays with unprecedented sensitivity between 20 GeV and 300 TeV to be installed on two sites: Canary Island La Palma and Paranal Chile. Three telescope sizes will be used to cover the entire energy range. Two different telescope designs have been proposed to cover the intermediate energy range from 150 GeV to 5 TeV. One of the proposals is based on the traditional single mirror Davies-Cotton design, with two different camera concepts with different detection and processing schemes are under test. Another innovative design based on a dual-mirror Schwarzschild-Couder optics has also been developed and is under test in Arizona, USA. In this talk, the different concepts and the status of the prototypes will be presented.

astro-ph.IM

Science Case for a Wide Field-of-View Very-High-Energy Gamma-Ray Observatory in the Southern Hemisphere

We outline the science motivation for SGSO, the Southern Gamma-Ray Survey Observatory. SGSO will be a next-generation wide field-of-view gamma-ray survey instrument, sensitive to gamma-rays in the energy range from 100 GeV to hundreds of TeV. Its science topics include unveiling galactic and extragalactic particle accelerators, monitoring the transient sky at very high energies, probing particle physics beyond the Standard Model, and the characterization of the cosmic ray flux. SGSO will consist of an air shower detector array, located in South America. Due to its location and large field of view, SGSO will be complementary to other current and planned gamma-ray observatories such as HAWC, LHAASO, and CTA.

astro-ph.HE

An experimental test of gravity at high energy

Gravitational lensing of very high energy photons has recently been observed in the JVAS B0218+357 strong lensing system. This observation opens the possibility of performing a test of gravity at high energy by comparing the difference in propagation time of high energy photons over different travel paths. The time delay is computed in the framework of a LIV (Lorentz Invariance Violation) extension of the equations of motion of photons in the field of a massive object. However, the method obtained can be transposed to other models of gravity at high energy. The potential for constraining high energy gravity with future observations of JVAS B0218+357 is discussed. The bounds on the LIV energy scale will not be competitive with other astrophysical bounds such as those coming from AGN and GRB flares. However, these bounds are free of any assumption on the emission process.

astro-ph.HE

Gravitational lensing of photons coupled to massive particles

The gravitational deflection of massless and massive particles, both with and without spin, has been extensively studied. This paper discusses the lensing of a particle which oscillates between two interaction eigenstates. The deflection angle, lens equation and time delay between images are derived in a model of photon to hidden-photon oscillations. In the case of coherent oscillations, the coupled photon behaves as a massive particle with a mass equal to the product of the coupling constant and hidden photon mass. The conditions for observing coherent photon-hidden photon lensing are discussed.

astro-ph.HE

Gravitational lensing time delays with massive photons

This paper investigates the use of gravitational time delays of macro-lenses to constrain a possible photon mass. The time delay between the 2 compact images of a source of massive photons is computed. Explicit expressions are given for Schwarzschild and singular isothermal lenses. In the latter case, the time delay is very insensitive to the photon mass. Modeling lens galaxies by a singular isothermal model and a central supermassive black hole, the photon mass-dependent part of the time delay between the compact images is shown to be proportional to the mass of the black hole. The sensitivity of time delays to the photon mass is illustrated by a bound obtained from 3 AGN which have measurements in several passbands. The bound obtained is comparable to the limit with the deflection of radio waves by the Sun.

astro-ph.HE

NectarCAM, a camera for the medium sized telescopes of the Cherenkov Telescope Array

NectarCAM is a camera proposed for the medium-sized telescopes of the Cherenkov Telescope Array (CTA) which covers the core energy range of ~100 GeV to ~30 TeV. It has a modular design and is based on the NECTAr chip, at the heart of which is a GHz sampling Switched Capacitor Array and 12-bit Analog to Digital converter. The camera will be equipped with 265 7-photomultiplier modules, covering a field of view of 8 degrees. Each module includes photomultiplier bases, high voltage supply, pre-amplifier, trigger, readout and Ethernet transceiver. The recorded events last between a few nanoseconds and tens of nanoseconds. The expected performance of the camera are discussed. Prototypes of NectarCAM components have been built to validate the design. Preliminary results of a 19-module mini-camera are presented, as well as future plans for building and testing a full size camera.

astro-ph.IM

NectarCAM : a camera for the medium size telescopes of the Cherenkov Telescope Array

NectarCAM is a camera proposed for the medium-sized telescopes of the Cherenkov Telescope Array (CTA) covering the central energy range of ~100 GeV to ~30 TeV. It has a modular design and is based on the NECTAr chip, at the heart of which is a GHz sampling Switched Capacitor Array and a 12-bit Analog to Digital converter. The camera will be equipped with 265 7-photomultiplier modules, covering a field of view of 8 degrees. Each module includes the photomultiplier bases, high voltage supply, pre-amplifier, trigger, readout and Ethernet transceiver. The recorded events last between a few nanoseconds and tens of nanoseconds. The camera trigger will be flexible so as to minimize the read-out dead-time of the NECTAr chips. NectarCAM is designed to sustain a data rate of more than 4 kHz with less than 5\% dead time. The camera concept, the design and tests of the various subcomponents and results of thermal and electrical prototypes are presented. The design includes the mechanical structure, cooling of the electronics, read-out, clock distribution, slow control, data-acquisition, triggering, monitoring and services.

astro-ph.IM

Limits on Primordial Black Hole evaporation with the H.E.S.S. array of Cherenkov telescopes

Data collected by the H.E.S.S. array between 2004 and 2012 have been used to search for photon bursts from primordial black hole explosions. Bursts were searched for in a 30 second time-window. The duration of the search window has been optimized to increase the burst signal while keeping the statistical background low. No evidence for a burst signal was found. Preliminary upper limits on the local rate of PBH explosions of $1.4\times 10^{4} {pc}^{-3} {yr}^{-1}$ have been obtained, which improve previously published limits by almost an order of magnitude

astro-ph.HE

The NectarCAM camera project

In the framework of the next generation of Cherenkov telescopes, the Cherenkov Telescope Array (CTA), NectarCAM is a camera designed for the medium size telescopes covering the central energy range of 100 GeV to 30 TeV. NectarCAM will be finely pixelated (~ 1800 pixels for a 8 degree field of view, FoV) in order to image atmospheric Cherenkov showers by measuring the charge deposited within a few nanoseconds time-window. It will have additional features like the capacity to record the full waveform with GHz sampling for every pixel and to measure event times with nanosecond accuracy. An array of a few tens of medium size telescopes, equipped with NectarCAMs, will achieve up to a factor of ten improvement in sensitivity over existing instruments in the energy range of 100 GeV to 10 TeV. The camera is made of roughly 250 independent read-out modules, each composed of seven photo-multipliers, with their associated high voltage base and control, a read-out board and a multi-service backplane board. The read-out boards use NECTAr (New Electronics for the Cherenkov Telescope Array) ASICs which have the dual functionality of analogue memories and Analogue to Digital Converter (ADC). The camera trigger to be used will be flexible so as to minimize the read-out dead-time of the NECTAr chips. We present the camera concept and the design and tests of the various subcomponents. The design includes the mechanical parts, the cooling of the electronics, the readout, the data acquisition, the trigger, the monitoring and services.

astro-ph.IM

Composite mirror facets for ground based gamma ray astronomy

Composite mirrors for gamma-ray astronomy have been developed to fulfill the specifications required for the next generation of Cherenkov telescopes represented by CTA (Cherenkov Telescope Array). In addition to the basic requirements on focus and reflection efficiency, the mirrors have to be stiff, lightweight, durable and cost efficient. In this paper, the technology developed to produce such mirrors is described, as well as some tests that have been performed to validate them. It is shown that these mirrors comply with the needs of CTA, making them good candidates for use on a significant part of the array.

astro-ph.IM

The topological second-level trigger of the H.E.S.S. phase 2 telescope

H.E.S.S is an array of atmospheric Cherenkov telescopes dedicated to GeV-TeV gamma-ray astronomy. The original array has been in operation since the beginning of 2004. It is composed of four 12-meter diameter telescopes. The installation of a fifth 28-meter diameter telescope is being completed. This telescope will operate both in stereoscopic mode and in monoscopic mode i.e. without a coincident detection on the smaller telescopes. A second-level trigger system is needed to supress spurious triggers of the 28-meter telescope when operated in monoscopic mode. This paper gives the motivation and principle of the second-level trigger. The principle of operation is illustrated by an example algorithm. The hardware implementation of the second level trigger system of H.E.S.S. phase 2 is described and its expected performances are then evaluated.

astro-ph.IM

First evidence for a gravitational lensing-induced echo in gamma rays with Fermi LAT

Aims. This article shows the first evidence for gravitational lensing phenomena in high energy gamma-rays. This evidence comes from the observation of a gravitational lens induced echo in the light curve of the distant blazar PKS 1830-211. Methods. Traditional methods for the estimation of time delays in gravitational lensing systems rely on the cross-correlation of the light curves of the individual images. In this paper, we use 300 MeV-30 GeV photons detected by the Fermi-LAT instrument. The Fermi-LAT instrument cannot separate the images of known lenses. The observed light curve is thus the superposition of individual image light curves. The Fermi-LAT instrument has the advantage of providing long, evenly spaced, time series. In addition, the photon noise level is very low. This allows to use directly Fourier transform methods. Results. A time delay between the two compact images of PKS 1830-211 has been searched for both by the autocorrelation method and the "double power spectrum" method. The double power spectrum shows a 3 σ evidence for a time delay of 27.5 $\pm$ 1.3 days, consistent with the result from Lovell et al. (1998). The relative uncertainty on the time delay estimation is reduced from 20% to 5%.

astro-ph.HE

Determination of stellar shape in microlensing event MOA 2002-BLG-33

We report a measurement of the shape of the source star in microlensing event MOA 2002-BLG-33. The lens for this event was a close binary whose centre-of-mass passed almost directly in front of the source star. At this time, the source star was closely bounded on all sides by a caustic of the lens. This allowed the oblateness of the source star to be constrained. We found that a/b = 1.02^{+0.04}_{-0.02} where a and b are its semi-major and semi-minor axes respectively. The angular resolution of this measurement is approximately 0.04 microarcsec. We also report HST images of the event that confirm a previous identification of the source star as an F8-G2 turn-off main-sequence star.

astro-ph

Probing the atmosphere of a solar-like star by galactic microlensing at high magnification

We report a measurement of limb darkening of a solar-like star in the very high magnification microlensing event MOA 2002-BLG-33. A 15 hour deviation from the light curve profile expected for a single lens was monitored intensively in V and I passbands by five telescopes spanning the globe. Our modelling of the light curve showed the lens to be a close binary system whose centre-of-mass passed almost directly in front of the source star. The source star was identified as an F8-G2 main sequence turn-off star. The measured stellar profiles agree with current stellar atmosphere theory to within ~4% in two passbands. The effective angular resolution of the measurements is <1 micro-arcsec. These are the first limb darkening measurements obtained by microlensing for a Solar-like star.

astro-ph