arXiv subjects

J-Y. Vinet

Publications and source records attributed to J-Y. Vinet.

12 recordsLinked to original sources

arXiv2010

Time Delay Interferometry for LISA with one arm dysfunctional

In order to attain the requisite sensitivity for LISA - a joint space mission of the ESA and NASA- the laser frequency noise must be suppressed below the secondary noises such as the optical path noise, acceleration noise etc. By combining six appropriately time-delayed data streams containing fractional Doppler shifts - a technique called time delay interferometry (TDI) - the laser frequency noise may be adequately suppressed. We consider the general model of LISA where the armlengths vary with time, so that second generation TDI are relevant. However, we must envisage the possibility, that not all the optical links of LISA will be operating at all times, and therefore, we here consider the case of LISA operating with two arms only. As shown earlier in the literature, obtaining even approximate solutions of TDI to the general problem is very difficult. Since here only four optical links are relevant, the algebraic problem simplifies considerably. We are then able to exhibit a large number of solutions (from mathematical point of view an infinite number) and further present an algorithm to generate these solutions.

gr-qc↗

arXiv2008

Optimising LISA orbits: The projectile solution

LISA is a joint space mission of the NASA and the ESA for detecting low frequency gravitational waves (GW) in the band $10^{-5} - 0.1$ Hz. The proposed mission will use coherent laser beams which will be exchanged between three identical spacecraft forming a giant (almost) equilateral triangle of side $5 \times 10^6$ kilometres. The plane of the triangle will make an angle of $\sim 60^{\circ}$ with the plane of the ecliptic. The spacecraft constituting LISA will be freely floating in the ambient gravitational field of the Sun and other celestial bodies. To achieve the requisite sensitivity, the spacecraft formation should remain stable, one requirement being, the distances between spacecraft should remain as constant as possible - that is the flexing of the arms should be minimal. In this paper we present a solution - the projectile solution - which constrains the flexing of the arms to below 5.5 metres/sec in a three year mission period. This solution is obtained in the field of the Sun and Earth only, which principally affect the motion of the spacecraft, especially the flexing of LISA's arms.

gr-qc↗

arXiv2008

General relativistic treatment of LISA optical links

LISA is a joint space mission of the NASA and the ESA for detecting low frequency gravitational waves in the band $10^{-5} - 1$ Hz. In order to attain the requisite sensitivity for LISA, the laser frequency noise must be suppressed below the other secondary noises such as the optical path noise, acceleration noise etc. This is achieved by combining time-delayed data for which precise knowledge of time-delays is required. The gravitational field, mainly that of the Sun and the motion of LISA affect the time-delays and the optical links. Further, the effect of the gravitational field of the Earth on the orbits of spacecraft is included. This leads to additional flexing over and above that of the Sun. We have written a numerical code which computes the optical links, that is, the time-delays with great accuracy $\sim 10^{-2}$ metres - more than what is required for time delay interferometry (TDI) - for most of the orbit and with sufficient accuracy within $\sim 10$ metres for an integrated time window of about six days, when one of the arms tends to be tangent to the orbit. Our analysis of the optical links is fully general relativistic and the numerical code takes into account effects such as the Sagnac, Shapiro delay, etc.. We show that with the deemed parameters in the design of LISA, there are symmetries inherent in the configuration of LISA and in the physics, which may be used effectively to suppress the residual laser noise in the modified first generation TDI. We demonstrate our results for some important TDI variables.

gr-qc↗

arXiv2007

Report on the first round of the Mock LISA Data Challenges

The Mock LISA Data Challenges (MLDCs) have the dual purpose of fostering the development of LISA data analysis tools and capabilities, and demonstrating the technical readiness already achieved by the gravitational-wave community in distilling a rich science payoff from the LISA data output. The first round of MLDCs has just been completed: nine data sets containing simulated gravitational wave signals produced either by galactic binaries or massive black hole binaries embedded in simulated LISA instrumental noise were released in June 2006 with deadline for submission of results at the beginning of December 2006. Ten groups have participated in this first round of challenges. Here we describe the challenges, summarise the results, and provide a first critical assessment of the entries.

gr-qc↗

arXiv2006

The Mock LISA Data Challenges: An overview

The LISA International Science Team Working Group on Data Analysis (LIST-WG1B) is sponsoring several rounds of mock data challenges, with the purposeof fostering the development of LISA data analysis capabilities, and of demonstrating technical readiness for the maximum science exploitation of the LISA data. The first round of challenge data sets were released at the Sixth LISA Symposium. We briefly describe the objectives, structure, and time-line of this programme.

gr-qc↗

arXiv2006

A How-To for the Mock LISA Data Challenges

The LISA International Science Team Working Group on Data Analysis (LIST-WG1B) is sponsoring several rounds of mock data challenges, with the purpose of fostering development of LISA data-analysis capabilities, and of demonstrating technical readiness for the maximum science exploitation of the LISA data. The first round of challenge data sets were released at this Symposium. We describe the models and conventions (for LISA and for gravitational-wave sources) used to prepare the data sets, the file format used to encode them, and the tools and resources available to support challenge participants.

gr-qc↗

arXiv2005

Reducing the flexing of the arms of LISA

The joint NASA-ESA mission LISA relies crucially on the stability of the three spacecraft constellation. All three spacecraft are on heliocentric and weakly eccentric orbits forming a stable triangle. It has been shown that for certain spacecraft orbits, the arms keep constant distances to the first order in the eccentricities. However, exact orbitography shows the so-called `breathing modes' of the arms where the arms slowly change their lengths over the time-scale of a year. In this paper we analyse the breathing modes (the flexing of the arms) with the help of the geodesic deviation equations to octupole order which are shown to be equivalent to higher order Clohessy-Wiltshire equations. We show that the flexing of the arms of LISA as given by the `exact' solution of Keplerian orbits, which gives constant armlengths to the first order in eccentricity and whose maximum flexing amplitude is $\sim 115,000$ km, can be improved, by tilting the plane of the LISA triangle slightly from the proposed orientation of $60^\circ$ with the ecliptic to obtain a maximum flexing amplitude of $\sim 48,000$ km, reducing it by a factor of $\sim 2.4$. The reduction factor is even larger if we consider the corresponding Doppler shifts, for which the reduction factor reaches almost a factor of 6. We solve the second order equations and obtain the general solution. We then use the general solution to establish the optimality of the solutions that we have found.

gr-qc↗

arXiv2004

Fundamentals of the LISA Stable Flight Formation

The joint NASA-ESA mission LISA relies crucially on the stability of the three spacecraft constellation. Each of the spacecraft is in heliocentric orbits forming a stable triangle. The principles of such a formation flight have been formulated long ago and analysis performed, but seldom presented if ever, even to LISA scientists. We nevertheless need these details in order to carry out theoretical studies on the optical links, simulators etc. In this article, we present in brief, a model of the LISA constellation, which we believe will be useful for the LISA community.

gr-qc↗

arXiv2003

Time Delay Interferometry and LISA Optimal Sensitivity

The sensitivity of LISA depends on the suppression of several noise sources; dominant one is laser frequency noise. It has been shown that the six Doppler data streams obtained from three space-crafts can be appropriately time delayed and optimally combined to cancel this laser frequency noise. We show that the optimal data combinations when operated in a network mode improves the sensitivity over Michelson ranging from 40 % to 100 %. In this article, we summarize these results. We further show that the residual laser noise in the optimal data combination due to typical arm-length inaccuracy of 200 m is much below the level of optical path and the proof mass noises.

gr-qc↗

arXiv2002

Improving the Sensitivity of LISA

It has been shown in the past, that the six Doppler data streams obtained LISA configuration can be combined by appropriately delaying the data streams for cancelling the laser frequency noise. Raw laser noise is several orders of magnitude above the other noises and thus it is essential to bring it down to the level of shot, acceleration noises. A rigorous and systematic formalism using the techniques of computational commutative algebra was developed which generates all the data combinations cancelling the laser frequency noise. The relevant data combinations form a first module of syzygies. In this paper we use this formalism for optimisation of the LISA sensitivity by analysing the noise and signal covariance matrices. The signal covariance matrix, averaged over polarisations and directions, is calculated for binaries whose frequency changes at most adiabatically. We then present the extremal SNR curves for all the data combinations in the module. They correspond to the eigenvectors of the noise and signal covariance matrices. We construct LISA `network' SNR by combining the outputs of the eigenvectors which improves the LISA sensitivity substantially. The maximum SNR curve can yield an improvement upto 70 % over the Michelson, mainly at high frequencies, while the improvement using the network SNR ranges from 40 % to over 100 %. Finally, we describe a simple toy model, in which LISA rotates in a plane. In this analysis, we estimate the improvement in the LISA sensitivity, if one switches from one data combination to another as it rotates. Here the improvement in sensitivity, if one switches optimally over three cyclic data combinations of the eigenvector is about 55 % on an average over the LISA band-width. The corresponding SNR improvement is 60 %, if one maximises over the module.

gr-qc↗

arXiv2002

Algebraic approach to time-delay data analysis for LISA

Cancellation of laser frequency noise in interferometers is crucial for attaining the requisite sensitivity of the triangular 3-spacecraft LISA configuration. Raw laser noise is several orders of magnitude above the other noises and thus it is essential to bring it down to the level of other noises such as shot, acceleration, etc. Since it is impossible to maintain equal distances between spacecrafts, laser noise cancellation must be achieved by appropriately combining the six beams with appropriate time-delays. It has been shown in several recent papers that such combinations are possible. In this paper, we present a rigorous and systematic formalism based on algebraic geometrical methods involving computational commutative algebra, which generates in principle {\it all} the data combinations cancelling the laser frequency noise. The relevant data combinations form the first module of syzygies, as it is called in the literature of algebraic geometry. The module is over a polynomial ring in three variables, the three variables corresponding to the three time-delays around the LISA triangle. Specifically, we list several sets of generators for the module whose linear combinations with polynomial coefficients generate the entire module. We find that this formalism can also be extended in a straight forward way to cancel Doppler shifts due to optical bench motions. The two modules are infact isomorphic. We use our formalism to obtain the transfer functions for the six beams and for the generators. We specifically investigate monochromatic gravitational wave sources in the LISA band and carry out the maximisiation over linear combinations of the generators of the signal-to-noise ratios with the frequency and source direction angles as parameters.

gr-qc↗

arXiv2000

Radiation Pressure Induced Instabilities in Laser Interferometric Detectors of Gravitational Waves

The large scale interferometric gravitational wave detectors consist of Fabry-Perot cavities operating at very high powers ranging from tens of kW to MW for next generations. The high powers may result in several nonlinear effects which would affect the performance of the detector. In this paper, we investigate the effects of radiation pressure, which tend to displace the mirrors from their resonant position resulting in the detuning of the cavity. We observe a remarkable effect, namely, that the freely hanging mirrors gain energy continuously and swing with increasing amplitude. It is found that the `time delay', that is, the time taken for the field to adjust to its instantaneous equilibrium value, when the mirrors are in motion, is responsible for this effect. This effect is likely to be important in the optimal operation of the full-scale interferometers such as VIRGO and LIGO.

gr-qc↗