arXiv subjects

J. -F. Berret

Publications and source records attributed to J. -F. Berret.

At least 37 records · Page 2Linked to original sources

arXiv2014

Evidence of a two-step process and pathway dependency in the thermodynamics of poly(diallyldimethylammonium chloride)/poly(sodium acrylate) complexation

Recent studies have pointed the importance of polyelectrolyte assembly in the elaboration of innovative nanomaterials. Beyond their structures, many important questions on the thermodynamics of association remain to be answered. Here, we investigate the complexation between poly(diallyldimethylammonium chloride) (PDADMAC) and poly(sodium acrylate) (PANa) chains using a combination of three techniques: isothermal titration calorimetry (ITC), static and dynamic light scattering and electrophoresis. Upon addition of PDADMAC to PANa or vice-versa, the results obtained by the different techniques agree well with each other, and reveal a two-step process. The primary process is the formation of highly charged polyelectrolyte complexes of sizes 100 nm. The secondary process is the transition towards a coacervate phase made of rich and poor polymer droplets. The binding isotherms measured are accounted for using a phenomenological model that provides the thermodynamic parameters for each reaction. Small positive enthalpies and large positive entropies consistent with a counterion release scenario are found throughout this study. Beyond, this work stresses the importance of the underestimated formulation pathway or mixing order in polyelectrolyte complexation.

cond-mat.mtrl-sci↗

arXiv2014

Preventing corona effects: multi-phosphonic acid poly(ethylene glycol) copolymers for stable stealth iron oxide nanoparticles

When disperse in biological fluids, engineered nanoparticles are selectively coated with proteins, resulting in the formation of a protein corona. It is suggested that the protein corona is critical in regulating the conditions of entry into the cytoplasm of living cells. Recent reports describe this phenomenon as ubiquitous and independent of the nature of the particle. For nanomedicine applications however, there is a need to design advanced and cost-effective coatings that are resistant to protein adsorption and that increase the biodistribution in vivo. In this study, phosphonic acid poly(ethylene glycol) copolymers were synthesized and used to coat iron oxide particles. The copolymer composition was optimized to provide simple and scalable protocols as well as long-term stability in culture media. It is shown that polymers with multiple phosphonic acid functionalities and PEG chains outperform other types of coating, including ligands, polyelectrolytes and carboxylic acid functionalized PEG. PEGylated particles exhibit moreover exceptional low cellular uptake, of the order of 100 femtograms of iron per cell. The present approach demonstrates that the surface chemistry of engineered particles is a key parameter in the interactions with cells. It also opens up new avenues for the efficient functionalization of inorganic surfaces.

cond-mat.mtrl-sci↗

arXiv2014

Surfactant-triggered disassembly of electrostatic complexes probed at optical and quartz crystal microbalance length scales

A critical advantage of electrostatic assemblies over covalent and crystalline bound materials is that associated structures can be disassembled into their original constituents. Nanoscale devices designed for the controlled release of functional molecules already exploit this property. To bring some insight into the mechanisms of disassembly and release, we study the disruption of molecular electrostatics based interactions via competitive binding with ionic surfactants. To this aim free-standing micron-size wires were synthesized using oppositely charged poly(diallyldimethylammonium chloride) and poly(acrylic acid) coated iron oxide nanoparticles. The disassembly is induced by the addition of sodium dodecyl sulfates that complex preferentially the positive polymers. The process is investigated at two different length scales: the length scale of the particles (10 nm) through the Quartz Crystal Microbalance technique, and that of the wires (> 1 micron) via optical microscopy. Upon surfactant addition, the disassembly is initiated at the surface of the wires by the release of nanoparticles and by the swelling of the structure. In a second step, erosion involving larger pieces takes over and culminates in the complete dissolution of the wires, confirming the hypothesis of a surface-type swelling and erosion process.

cond-mat.mtrl-sci↗

arXiv2013

Universal Scaling Law to Predict the Efficiency of Magnetic Nanoparticles as MRI T2-Contrast Agents

Magnetic particles are very efficient Magnetic Resonance Imaging (MRI) contrast agents. In the recent years, chemists have unleashed their imagination to design multi-functional nanoprobes for biomedical applications including MRI contrast enhancement. This study is focused on the direct relationship between the size and magnetization of the particles and their nuclear magnetic resonance relaxation properties, which condition their efficiency. Experimental relaxation results with maghemite particles exhibiting a wide range of sizes and magnetizations are compared to previously published data and to well-established relaxation theories with a good agreement. This allows deriving the experimental master curve of the transverse relaxivity versus particle size and to predict the MRI contrast efficiency of any type of magnetic nanoparticles. This prediction only requires the knowledge of the size of the particles impermeable to water protons and the saturation magnetization of the corresponding volume. To predict the T2 relaxation efficiency of magnetic single crystals, the crystal size and magnetization obtained through a single Langevin fit of a magnetization curve is the only information needed. For contrast agents made of several magnetic cores assembled into various geometries (dilute fractal aggregates, dense spherical clusters, core-shell micelles, hollow vesicles), one needs to know a third parameter, namely the intra-aggregate volume fraction occupied by the magnetic materials relatively to the whole (hydrodynamic) sphere. Finally a calculation of the maximum achievable relaxation effect and the size needed to reach this maximum is performed for different cases: maghemite single crystals and dense clusters, core-shell particles (oxide layer around a metallic core) and zinc manganese ferrite crystals.

cond-mat.mtrl-sci↗

arXiv2013

Thirty Femtograms Detection of Iron in Mammalian Cells

Inorganic nanomaterials and particles with enhanced optical, mechanical or magnetic attributes are currently being developed for a wide range of applications. Safety issues have been formulated however concerning their potential cyto- and genotoxicity. For in vivo and in vitro experimentations, recent developments have heightened the need of simple and facile methods to measure the amount of nanoparticles taken up by cells or tissues. In this work, we present a rapid and highly sensitive method for quantifying the uptake of iron oxide nanoparticles in mammalian cells. Our approach exploits the digestion of incubated cells with concentrated hydrochloric acid reactant and a colorimetric based UV-Visible absorption technique. The technique allows the detection of iron in cells over 4 decades in masses, from 0.03 to 300 picograms per cell. Applied on particles of different surface chemistry and sizes, the protocol demonstrates that the coating is the key parameter in the nanoparticle/cell interactions. The data are corroborated by scanning and transmission electron microscopy and stress the importance of resiliently adsorbed nanoparticles at the plasma membrane.

cond-mat.soft↗

arXiv2013

Magnetic wire-based sensors for the micro-rheology of complex fluids

We propose a simple micro-rheology technique to evaluate the viscoelastic properties of complex fluids. The method is based on the use of magnetic wires of a few microns in length submitted to a rotational magnetic field. In this work, the method is implemented on a surfactant wormlike micellar solution that behaves as an ideal Maxwell fluid. With increasing frequency, the wires undergo a transition between a steady and a hindered rotation regime. The study shows that the average rotational velocity and the amplitudes of the oscillations obey scaling laws with well-defined exponents. From a comparison between model predictions and experiments, the rheological parameters of the fluid are determined.

cond-mat.soft↗

arXiv2013

Sub-Piconewton Force Detection using Micron-Size Wire Deflections

The mechanical properties of nanostructured wires obtained by co-assembly of iron oxide particles are studied. The intrinsic magnetic properties of the wires are used to induce and quantify the bending of the one-dimensional objects. From the relationship between the deflection and the magnitude of the magnetic field, the elastic rigidity and Young modulus of the wires are determined. Young moduli in the megapascal range are obtained and are consistent with sub-piconewton force detection.

cond-mat.soft↗

arXiv2013

Intracellular micro-rheology probed by micron-sized wires

In the last decade, rapid advances have been made in the field of micro-rheology of cells and tissues. Given the complexity of living systems, there is a need for the development of new types of nano- and micron-sized probes, and in particular of probes with controlled interactions with the surrounding medium. In the present paper, we evaluate the use of micron-sized wires as potential probes of the mechanical properties of cells. The wire-based micro-rheology technique is applied to living cells such as murine fibroblasts and canine kidney epithelial cells. The mean-squared angular displacement (MSAD) of wires associated to their rotational dynamics is obtained as a function of the time using optical microscopy and image processing. It reveals a Brownian-like diffusive regime where the MSA scale linearly with time and as the inverse of the cube of the wire length. This scaling suggests that an effective viscosity of the intracellular medium can be determined, and that in the range 1 - 10 micrometers it does not depend on the length scale over which it is measured.

cond-mat.soft↗

arXiv2013

Interfacial activity of phosphonated-polyethylene glycol functionalized cerium oxide nanoparticles

In a recent publication, we have highlighted the potential of phosphonic acid terminated PEG oligomers to functionalize strong UV absorption cerium oxide nanoparticles[1], which yield suspensions that are stable in aqueous or organic solvents and are redispersible in different solvent after freeze-drying. In the present work, we highlight the interfacial activity of the functional ceria nanoparticles and their potential to modify hydrophobic surfaces. We first investigated Phosphonated-PEG amphiphilic oligomers behavior as strong surface active species forming irreversibly adsorbed layers. We then show that the oligomers interfacial properties translate to the functional nanoparticles. In particular, the addition of a small fraction of phosphonated-PEG oligomers with an extra C16 aliphatic chain (stickers) into the formulation enabled the tuning of i) the nanoparticles adsorption at the air/water, polystyrene/water, oil/water interfaces and ii) the particle/particle interaction in aqueous solutions. We also found that dense and closely packed two dimensional monolayers of nanoceria can be formed by spontaneous adsorption or surface compression using a Langmuir trough. A hexagonal organization controlled by reversible and repulsive repulsion has been characterized by GISAXS. Mono- or multilayers can also be stably formed or transferred on solid surfaces. Our results are key features in the field of polymer surface modification, solid stabilized emulsions (Pickering) or supracolloidal assemblies.

cond-mat.mtrl-sci↗

arXiv2012

Poly(acrylic acid)-coated iron oxide nanoparticles : quantitative evaluation of the coating properties and applications for the removal of a pollutant dye

In this work, 6 to 12 nm iron oxide nanoparticles were synthesized and coated with poly(acrylic acid) chains of molecular weight 2100 g/mol. Based on a quantitative evaluation of the dispersions, the bare and coated particles were thoroughly characterized. The number densities of polymers adsorbed at the particle surface and of available chargeable groups were found to be 1.9 +/- 0.3 nm-2 and 26 +/- 4 nm-2, respectively. Occurring via a multi-site binding mechanism, the electrostatic coupling leads to a solid and resilient anchoring of the chains. To assess the efficacy of the particles for pollutant remediation, the adsorption isotherm of methylene blue molecules, a model of pollutant, was determined. The excellent agreement between the predicted and measured amounts of adsorbed dyes suggests that most carboxylates participate to the complexation and adsorption mechanisms. An adsorption of 830 mg/g was obtained. This quantity compares well with the highest values available for this dye.

cond-mat.mtrl-sci↗

arXiv2011

Fabrication of magnetic clusters and rods using electrostatic co-assembly

Using a novel protocol for mixing oppositely charged colloids and macromolecules, magnetic clusters and rods are fabricated using 10 nm-iron oxide nanoparticles and polymers. Here, we show that as the dispersions undergo the so-called desalting transition, spherical clusters in the range 100 nm - 1 μm form spontaneously upon dialysis or dilution. With a magnetic field applied during the dialysis, a one-dimensional growth of the aggregates is initiated, resulting in the formation of 1 - 100 μm rods of average diameter 200 nm. In this paper, we demonstrate that the nanostructured rods have inherited the properties of the iron oxide particles, namely to be superparamagnetic. We also discuss the dependence of the magnetic properties as a function of the nanoparticle diameter.

cond-mat.mtrl-sci↗

arXiv2011

Versatile Electrostatic Assembly of Nanoparticles & Polyelectrolytes: Coating, Clustering and Layer-by-Layer Processes

Engineered nanoparticles made from noble metals, rare-earth oxides or semiconductors are emerging as the central constituents of future nanotech developments. In this review, a survey of the complexing strategies between nanoparticles and oppositely charged polyelectrolytes developed during the last three years and based on electrostatic interactions is presented. These strategies include the one-step synthesis of stable and functionalized nanoparticles, the one- and multilayer coating of individual nano-objects, the controlled clustering of particles and the generation of capsules and thin films with superior functionalities. Among the formulation processes reported, three main classes are identified : the direct mixing route, the desalting transition pathway and the well-known layer by layer method. Finally, some latter developments, trends and applications of electrostatic assemblies in materials science and nanomedicine are highlighted

cond-mat.mtrl-sci↗

arXiv2011

The effects of aggregation and protein corona on the cellular internalization of iron oxide nanoparticles

Engineered inorganic nanoparticles are essential components in the development of nanotechnologies. For applications in nanomedicine, particles need to be functionalized to ensure a good dispersibility in biological fluids. In many cases however, functionalization is not sufficient : the particles become either coated by a corona of serum proteins or precipitate out of the solvent. In the present paper, we show that by changing the coating of iron oxide nanoparticles from a low-molecular weight ligand (citrate ions) to small carboxylated polymers (poly(acrylic acid)), the colloidal stability of the dispersion is improved and the adsorption/internalization of iron towards living mammalian cells is profoundly affected. Citrate-coated particles are shown to destabilize in all fetal-calf-serum based physiological conditions tested, whereas the polymer coated particles exhibit an outstanding dispersibility as well as a structure devoid of protein corona. The interactions between nanoparticles and human lymphoblastoid cells are investigated by transmission electron microscopy and flow cytometry. Two types of nanoparticle/cell interactions are underlined. Iron oxides are found either adsorbed on the cellular membranes, or internalized into membrane-bound endocytosis compartments. For the precipitating citrate-coated particles, the kinetics of interactions reveal a massive and rapid adsorption of iron oxide on the cell surfaces. The quantification of the partition between adsorbed and internalized iron was performed from the cytometry data. The results highlight the importance of resilient adsorbed nanomaterials at the cytoplasmic membrane.

cond-mat.mtrl-sci↗

arXiv2011

In vitro toxicity and uptake of magnetic nanorods

In this paper we investigate the internalization and cytotoxicity of nanostructured materials having the form of elongated rods, with diameter of 200 nm and lengths 1 - 10 μm. The rods were made from the controlled aggregation of sub-10 nm iron oxide nanoparticles. Recently, we have shown that the nanorods inherited the superparamagnetic property of the particles. These rods can actually be moved by the application of an external magnetic field. Here we evaluate the in vitro toxicity of the magnetic nanorods by using MTT assays on NIH/3T3 mouse fibroblasts. The toxicity assays revealed that the nanorods are biocompatible, as exposed cells remained 100% viable relative to controls over a period of a few days. Optical microscopy allow to visualize the rods inside the cells and to determine their number per cell. Roughly 1/3 of the total incubated rods were uptaken by the fibroblasts.

cond-mat.mtrl-sci↗

arXiv2011

Magnetic nanowires generated via the waterborne desalting transition pathway

We report a simple and versatile waterborne synthesis of magnetic nanowires following the innovative concept of electrostatic "desalting transition". Highly persistent superparamagnetic nanowires are generated from the controlled assembly of oppositely charged nanoparticles and commercially available polyelectrolytes. The wires have diameters around 200 nm and lengths comprised between 1 μm and 1/2 mm, with either positive or negative charges on their surface. Beyond, we show that this soft-chemistry assembly approach is a general phenomenon independent of the feature of the macromolecular building blocks, opening significant perspectives for the design of multifunctional materials.

cond-mat.mtrl-sci↗

arXiv2011

Probing oppositely charged surfactant and copolymer interactions by isothermal titration microcalorimetry

The complexation between charged-neutral block copolymers and oppositely charged surfactants was investigated by light scattering experiments and by isothermal titration calorimetry (ITC). The copolymer was poly(sodium acrylate)-b-poly(acrylamide) and the surfactant dodecyltrimethylammonium bromide (DTAB). In a previous report, we had shown that the copolymers and the surfactants co-assembled spontaneously into colloidal complexes. Depending of the charge ratio Z = [DTA+]/[COO-], the complexes were either single surfactant micelles decorated by copolymers, or core-shell hierarchical structures. ITC was performed in order to investigate the thermodynamics of the complex formation. Titrations of copolymers by surfactants and of surfactants by copolymers revealed that the electrostatic co-assembly was an endothermic reaction, suggesting a process dominated by the entropy of the counterions. Here we found that the thermodynamic quantities associated with the reaction depended on the mixing order. When surfactants were added stepwise to copolymers, the titration was associated with the formation of single micelles decorated by a unique polymer. Above a critical charge ratio, the micelles rearranged themselves into 100 nm colloidal complexes in a collective process which displayed the following features : i) the process was very slow as compared to the timescale of Brownian diffusion, ii) the thermodynamic signature was a endothermic peak and iii) the stoichiometry between the positive and negative charges was modified from n = 0.48 (single micelles) to 0.75 (core-shell complexes). The amount of polyelectrolytes needed for the complex formation exceeded the number required to compensate the net micellar charge, confirming the evidence of overcharging in the complex formation.

cond-mat.mtrl-sci↗

arXiv2011

Controlling electrostatic co-assembly using ion-containing copolymers : from surfactants to nanoparticles

In this review, we address the issue of the electrostatic complexation between charged-neutral diblock copolymers and oppositely charged nanocolloids. We show that nanocolloids such as surfactant micelles and iron oxide magnetic nanoparticles share similar properties when mixed with charged-neutral diblocks. Above a critical charge ratio, core-shell hierarchical structures form spontaneously under direct mixing conditions. The core-shell structures are identified by a combination of small-angle scattering techniques and transmission electron microscopy. The formation of multi-level objects is driven by the electrostatic attraction between opposite charges and by the release of the condensed counterions. Alternative mixing processes inspired from molecular biology are also described. The protocols applied here consist in screening the electrostatic interactions of the mixed dispersions, and then removing the salt progressively as example by dialysis. With these techniques, the oppositely charged species are intimately mixed before they can interact, and their association is monitored by the desalting kinetics. As a result, sphere- and rod-like aggregates with remarkable superparamagnetic and stability properties are obtained. These findings are discussed in the light of a new paradigm which deals with the possibility to use inorganic nanoparticles as building blocks for the design and fabrication of supracolloidal assemblies with enhanced functionalities.

cond-mat.soft↗

arXiv2010

Interactions between sub-10 nm iron and cerium oxide nanoparticles and 3T3 fibroblasts : the role of the coating and aggregation state

Recent nanotoxicity studies revealed that the physico-chemical characteristics of engineered nanomaterials play an important role in the interactions with living cells. Here, we report on the toxicity and uptake of the cerium and iron oxide sub-10 nm nanoparticles by NIH/3T3 mouse fibroblasts. Coating strategies include low-molecular weight ligands (citric acid) and polymers (poly(acrylic acid), MW = 2000 g mol-1). Electrostatically adsorbed on the surfaces, the organic moieties provide a negatively charged coating in physiological conditions. We find that most particles were biocompatible, as exposed cells remained 100% viable relative to controls. Only the bare and the citrate-coated nanoceria exhibit a slight decrease of the mitochondrial activity for cerium concentrations above 5 mM (equivalent to 0.8 g L-1). We also observe that the citrate-coated particles are internalized by the cells in large amounts, typically 250 pg per cell after a 24 h incubation for iron oxide. In contrast, the polymer-coated particles are taken up at much lower rates (< 30 pg per cell). The strong uptake shown by the citrate-coated particles is related to the destabilization of the dispersions in the cell culture medium and their sedimentation down to the cell membranes. In conclusion, we show that the uptake of nanomaterials by living cells depends on the coating of the particles and on its ability to preserve the colloidal nature of the dispersions.

cond-mat.mtrl-sci↗