arXiv subjects

J. -H. Lee

Publications and source records attributed to J. -H. Lee.

7 recordsLinked to original sources

arXiv2014

eRHIC Design Study: An Electron-Ion Collider at BNL

This document presents BNL's plan for an electron-ion collider, eRHIC, a major new research tool that builds on the existing RHIC facility to advance the long-term vision for Nuclear Physics to discover and understand the emergent phenomena of Quantum Chromodynamics (QCD), the fundamental theory of the strong interaction that binds the atomic nucleus. We describe the scientific requirements for such a facility, following up on the community-wide 2012 white paper, 'Electron-Ion Collider: the Next QCD Frontier', and present a design concept that incorporates new, innovative accelerator techniques to provide a cost-effective upgrade of RHIC with polarized electron beams colliding with the full array of RHIC hadron beams. The new facility will deliver electron-nucleon luminosity of 10^33-10^34 cm-1sec-1 for collisions of 15.9 GeV polarized electrons on either 250 GeV polarized protons or 100 GeV/u heavy ion beams. The facility will also be capable of providing an electron beam energy of 21.2 GeV, at reduced luminosity. We discuss the on-going R&D effort to realize the project, and present key detector requirements and design ideas for an experimental program capable of making the 'golden measurements' called for in the EIC White Paper.

physics.acc-ph↗

arXiv2014

Electron Ion Collider: The Next QCD Frontier - Understanding the glue that binds us all

This White Paper presents the science case of an Electron-Ion Collider (EIC), focused on the structure and interactions of gluon-dominated matter, with the intent to articulate it to the broader nuclear science community. It was commissioned by the managements of Brookhaven National Laboratory (BNL) and Thomas Jefferson National Accelerator Facility (JLab) with the objective of presenting a summary of scientific opportunities and goals of the EIC as a follow-up to the 2007 NSAC Long Range plan. This document is a culmination of a community-wide effort in nuclear science following a series of workshops on EIC physics and, in particular, the focused ten-week program on "Gluons and quark sea at high energies" at the Institute for Nuclear Theory in Fall 2010. It contains a brief description of a few golden physics measurements along with accelerator and detector concepts required to achieve them, and it benefited from inputs from the users' communities of BNL and JLab. This White Paper offers the promise to propel the QCD science program in the U.S., established with the CEBAF accelerator at JLab and the RHIC collider at BNL, to the next QCD frontier.

nucl-ex↗

arXiv2013

Structural control of magnetic anisotropy in a strain driven multiferroic EuTiO3 thin film

Octahedral distortion plays a key role in engineering the physical properties of heterostructures composed of perovskite oxides. We observe a strong in-plane uniaxial magnetic anisotropy in a strain-enabled multiferroic EuTiO3 thin film epitaxially grown on a (110)o DyScO3 substrate. First principles calculations show that the magnetic anisotropy is closely correlated with the uniaxial TiO6 octahedral tilting and the ferroelectric polarization of the film, indicating potential strong magnetoelectric coupling in the strain-engineered multiferroic system.

cond-mat.mtrl-sci↗

arXiv2012

Reversible Control of Magnetic Interactions by Electric Field in a Single Phase Material

Intrinsic magnetoelectric coupling describes the interaction between magnetic and electric polarization through an inherent microscopic mechanism in a single phase material. This phenomenon has the potential to control the magnetic state of a material with an electric field, an enticing prospect for device engineering. We demonstrate 'giant' magnetoelectric cross-field control in a single phase rare earth titanate film. In bulk form, EuTiO3 is antiferromagnetic. However, both anti and ferromagnetic interactions coexist between different nearest neighbor europium ions. In thin epitaxial films, strain can be used to alter the relative strength of the magnetic exchange constants. Here, we not only show that moderate biaxial compression precipitates local magnetic competition, but also demonstrate that the application of an electric field at this strain state, switches the magnetic ground state. Using first principles density functional theory, we resolve the underlying microscopic mechanism resulting in the EuTiO3 G-type magnetic structure and illustrate how it is responsible for the 'giant' cross-field magnetoelectric effect.

cond-mat.mtrl-sci↗

arXiv2009

Oxygen vacancy induced re-entrant spin glass behavior in multiferroic ErMnO3 thin films

Epitaxial thin films of hexagonal ErMnO3 fabricated on Pt(111)/Al2O3(0001) and YSZ(111) substrates exhibited both ferroelectric character and magnetic ordering at low temperatures. As the temperature was reduced, the ErMnO3 films first showed antiferromagnetism. At lower temperatures, the films deposited at lower oxygen partial pressures exhibited spin glass behavior. This re-entrant spin glass behavior was attributed to competition between an antiferromagnetic interaction in the hexagonal geometry and a ferromagnetic interaction caused by a change in Mn valence induced by excess electrons from the oxygen vacancies.

cond-mat.str-el↗

arXiv2008

Micro-electroforming metallic bipolar electrodes for mini-DMFC stacks

This paper describes the development of metallic bipolar plate fabrication using micro-electroforming process for mini-DMFC (direct methanol fuel cell) stacks. Ultraviolet (UV) lithography was used to define micro-fluidic channels using a photomask and exposure process. Micro-fluidic channels mold with 300 micrometers thick and 500 micrometers wide were firstly fabricated in a negative photoresist onto a stainless steel plate. Copper micro-electroforming was used to replicate the micro-fluidic channels mold. Following by sputtering silver (Ag) with 1.2 micrometers thick, the metallic bipolar plates were completed. The silver layer is used for corrosive resistance. The completed mini-DMFC stack is a 2x2 cm2 fuel cell stack including a 1.5x1.5 cm2 MEA (membrane electrode assembly). Several MEAs were assembly into mini-DMFC stacks using the completed metallic bipolar plates. All test results showed the metallic bipolar plates suitable for mini-DMFC stacks. The maximum output power density is 9.3mW/cm2 and current density is 100 mA/cm2 when using 8 vol. % methanol as fuel and operated at temperature 30 degrees C. The output power result is similar to other reports by using conventional graphite bipolar plates. However, conventional graphite bipolar plates have certain difficulty to be machined to such micro-fluidic channels. The proposed micro-electroforming metallic bipolar plates are feasible to miniaturize DMFC stacks for further portable 3C applications.

cs.OH↗

arXiv2006

Multiferroic properties of epitaxially stabilized hexagonal DyMnO3 thin films

We fabricated epitaxial thin films of hexagonal DyMnO3, which otherwise form in a bulk perovskite structure, via deposition on Pt(111)//Al2O3 (0001) and YSZ(111) substrates: each of which has in-plane hexagonal symmetry. The polarization hysteresis loop demonstrated the existence of ferroelectricity in our hexagonal DyMnO3 films at least below 70 K. The observed 2.2 uC/cm^2 remnant polarization at 25 K corresponded to a polarization enhancement by a factor of 10 compared to that of the bulk orthorhombic DyMnO3. Interestingly, this system showed an antiferroelectric-like feature in its hysteresis loop. Our hexagonal DyMnO3 films showed an antiferromagnetic Neel temperature around 60 K and a spin reorientation transition around 40 K. We also found a clear hysteresis in the temperature dependence of the magnetization, which was measured after zero-field-cooling and field-cooling. This hysteresis may well have been of spin glass origin, which was likely to arise from the geometric frustration of antiferromagnetically-coupled Mn spins with an edge-sharing triangular lattice.

cond-mat.mtrl-sci↗