arXiv subjects

J. -M. Le Goff

Publications and source records attributed to J. -M. Le Goff.

17 recordsLinked to original sources

arXiv2020

A tomographic map of the large-scale matter distribution using the eBOSS Stripe 82 Ly-$α$ forest

The Lyman-$α$ (hereafter Ly-$α$) forest is a probe of large-scale matter density fluctuations at high redshift, $z > 2.1$. It consists of HI absorption spectra along individual lines-of-sight. If the line-of-sight density is large enough, 3D maps of HI absorption can be inferred by tomographic reconstruction. In this article, we investigate the Ly-$α$ forest available in the Stripe 82 field ($220\,\mathrm{deg^{2}}$), based on the quasar spectra from SDSS Data Release DR16. The density of observed quasar spectra is $37\,\mathrm{deg^{-2}}$ with a mean pixel signal-to-noise ratio of two per angstrom. This study provides an intermediate case between the average SDSS density and that of the much denser but smaller CLAMATO survey. We derive a 3D map of large-scale matter fluctuations from these data, using a Wiener filter technique. The total volume of the map is $0.94\,\mathrm{h^{-3} Gpc^{3}}$. Its resolution is $13\,\mathrm{h^{-1} Mpc}$, which is related to the mean transverse distance between nearest lines-of-sight. From this map, we provide a catalog of voids and protocluster candidates in the cosmic web. The map-making and void catalog are compared to simulated eBOSS Stripe 82 observations. A stack over quasar positions provides a visualization of the Ly-$α$ quasar cross-correlation. This tomographic reconstruction constitutes the largest-volume high-redshift 3D map of matter fluctuations.

astro-ph.CO↗

arXiv2018

The Sloan Digital Sky Survey Quasar Catalog: Fourteenth Data Release

We present the Data Release 14 Quasar catalog (DR14Q) from the extended Baryon Oscillation Spectroscopic Survey (eBOSS) of the Sloan Digital Sky Survey IV (SDSS-IV). This catalog includes all SDSS-IV/eBOSS objects that were spectroscopically targeted as quasar candidates and that are confirmed as quasars via a new automated procedure combined with a partial visual inspection of spectra, have luminosities $M_{\rm i} \left[ z=2 \right] < -20.5$ (in a $Λ$CDM cosmology with $H_0 = 70 \ {\rm km \ s^{-1} \ Mpc ^{-1}}$, $Ω_{\rm M} = 0.3$, and $Ω_{\rm Λ} = 0.7$), and either display at least one emission line with a full width at half maximum (FWHM) larger than $500 \ {\rm km \ s^{-1}}$ or, if not, have interesting/complex absorption features. The catalog also includes previously spectroscopically-confirmed quasars from SDSS-I, II and III. The catalog contains 526,356 quasars 144,046 are new discoveries since the beginning of SDSS-IV) detected over 9,376 deg$^2$ (2,044 deg$^2$ having new spectroscopic data available) with robust identification and redshift measured by a combination of principal component eigenspectra. The catalog is estimated to have about 0.5% contamination. The catalog identifies 21,877 broad absorption line quasars and lists their characteristics. For each object, the catalog presents SDSS five-band CCD-based photometry with typical accuracy of 0.03 mag. The catalog also contains X-ray, ultraviolet, near-infrared, and radio emission properties of the quasars, when available, from other large-area surveys.

astro-ph.GA↗

arXiv2015

Cosmological implications of baryon acoustic oscillation (BAO) measurements

We derive constraints on cosmological parameters and tests of dark energy models from the combination of baryon acoustic oscillation (BAO) measurements with cosmic microwave background (CMB) and Type Ia supernova (SN) data. We take advantage of high-precision BAO measurements from galaxy clustering and the Ly-alpha forest (LyaF) in the BOSS survey of SDSS-III. BAO data alone yield a high confidence detection of dark energy, and in combination with the CMB angular acoustic scale they further imply a nearly flat universe. Combining BAO and SN data into an "inverse distance ladder" yields a 1.7% measurement of $H_0=67.3 \pm1.1$ km/s/Mpc. This measurement assumes standard pre-recombination physics but is insensitive to assumptions about dark energy or space curvature, so agreement with CMB-based estimates that assume a flat LCDM cosmology is an important corroboration of this minimal cosmological model. For open LCDM, our BAO+SN+CMB combination yields $Ω_m=0.301 \pm 0.008$ and curvature $Ω_k=-0.003 \pm 0.003$. When we allow more general forms of evolving dark energy, the BAO+SN+CMB parameter constraints remain consistent with flat LCDM. While the overall $χ^2$ of model fits is satisfactory, the LyaF BAO measurements are in moderate (2-2.5 sigma) tension with model predictions. Models with early dark energy that tracks the dominant energy component at high redshifts remain consistent with our constraints. Expansion history alone yields an upper limit of 0.56 eV on the summed mass of neutrino species, improving to 0.26 eV if we include Planck CMB lensing. Standard dark energy models constrained by our data predict a level of matter clustering that is high compared to most, but not all, observational estimates. (Abridged)

astro-ph.CO↗

arXiv2014

Baryon Acoustic Oscillations in the Lyα forest of BOSS DR11 quasars

We report a detection of the baryon acoustic oscillation (BAO) feature in the flux-correlation function of the Lyα forest of high-redshift quasars with a statistical significance of five standard deviations. The study uses 137,562 quasars in the redshift range $2.1\le z \le 3.5$ from the Data Release 11 (DR11) of the Baryon Oscillation Spectroscopic Survey (BOSS) of SDSS-III. This sample contains three times the number of quasars used in previous studies. The measured position of the BAO peak determines the angular distance, $D_A(z=2.34)$ and expansion rate, $H(z=2.34)$, both on a scale set by the sound horizon at the drag epoch, $r_d$. We find $D_A/r_d=11.28\pm0.65(1σ)^{+2.8}_{-1.2}(2σ)$ and $D_H/r_d=9.18\pm0.28(1σ)\pm0.6(2σ)$ where $D_H=c/H$. The optimal combination, $\sim D_H^{0.7}D_A^{0.3}/r_d$ is determined with a precision of $\sim2\%$. For the value $r_d=147.4~{\rm Mpc}$, consistent with the CMB power spectrum measured by Planck, we find $D_A(z=2.34)=1662\pm96(1σ)~{\rm Mpc}$ and $H(z=2.34)=222\pm7(1σ)~{\rm km\,s^{-1}Mpc^{-1}}$. Tests with mock catalogs and variations of our analysis procedure have revealed no systematic uncertainties comparable to our statistical errors. Our results agree with the previously reported BAO measurement at the same redshift using the quasar-Lyα forest cross-correlation. The auto-correlation and cross-correlation approaches are complementary because of the quite different impact of redshift-space distortion on the two measurements. The combined constraints from the two correlation functions imply values of $D_A/r_d$ and $D_H/r_d$ that are, respectively, 7% low and 7% high compared to the predictions of a flat $Λ$CDM cosmological model with the best-fit Planck parameters. With our estimated statistical errors, the significance of this discrepancy is $\approx 2.5σ$.

astro-ph.CO↗

arXiv2013

An optimized correlation function estimator for galaxy surveys

Measuring the two-point correlation function of the galaxies in the Universe gives access to the underlying dark matter distribution, which is related to cosmological parameters and to the physics of the primordial Universe. The estimation of the correlation function for current galaxy surveys makes use of the Landy-Szalay estimator, which is supposed to reach minimal variance. This is only true, however, for a vanishing correlation function. We study the Landy-Szalay estimator when these conditions are not fulfilled and propose a new estimator that provides the smallest variance for a given survey geometry. Our estimator is a linear combination of ratios between paircounts of data and/or random catalogues (DD, RR and DR). The optimal combination for a given geometry is determined by using lognormal mock catalogues. The resulting estimator is biased in a model-dependent way, but we propose a simple iterative procedure for obtaining an unbiased model- independent estimator.Our method can be easily applied to any dataset and requires few extra mock catalogues compared to the standard Landy-Szalay analysis. Using various sets of simulated data (lognormal, second-order LPT and N-Body), we obtain a 20-25% gain on the error bars on the two-point correlation function for the SDSS geometry and $Λ$CDM correlation function. When applied to SDSS data (DR7 and DR9), we achieve a similar gain on the correlation functions, which translates into a 10-15% improvement over the estimation of the densities of matter $Ω_m$ and dark energy $Ω_Λ$ in an open $Λ$CDM model. The constraints derived from DR7 data with our estimator are similar to those obtained with the DR9 data and the Landy-Szalay estimator, which covers a volume twice as large and has a density that is three times higher.

astro-ph.CO↗

arXiv2013

Measurement of Baryon Acoustic Oscillations in the Lyman-alpha Forest Fluctuations in BOSS Data Release 9

We use the Baryon Oscillation Spectroscopic Survey (BOSS) Data Release 9 (DR9) to detect and measure the position of the Baryonic Acoustic Oscillation (BAO) feature in the three-dimensional correlation function in the Lyman-alpha forest flux fluctuations at a redshift z=2.4. The feature is clearly detected at significance between 3 and 5 sigma (depending on the broadband model and method of error covariance matrix estimation) and is consistent with predictions of the standard LCDM model. We assess the biases in our method, stability of the error covariance matrix and possible systematic effects. We fit the resulting correlation function with several models that decouple the broadband and acoustic scale information. For an isotropic dilation factor, we measure 100x(alpha_iso-1) = -1.6 ^{+2.0+4.3+7.4}_{-2.0-4.1-6.8} (stat.) +/- 1.0 (syst.) (multiple statistical errors denote 1,2 and 3 sigma confidence limits) with respect to the acoustic scale in the fiducial cosmological model (flat LCDM with Omega_m=0.27, h=0.7). When fitting separately for the radial and transversal dilation factors we find marginalised constraints 100x(alpha_par-1) = -1.3 ^{+3.5+7.6 +12.3}_{-3.3-6.7-10.2} (stat.) +/- 2.0 (syst.) and 100x(alpha_perp-1) = -2.2 ^{+7.4+17}_{-7.1-15} +/- 3.0 (syst.). The dilation factor measurements are significantly correlated with cross-correlation coefficient of ~ -0.55. Errors become significantly non-Gaussian for deviations over 3 standard deviations from best fit value. Because of the data cuts and analysis method, these measurements give tighter constraints than a previous BAO analysis of the BOSS DR9 Lyman-alpha forest sample, providing an important consistency test of the standard cosmological model in a new redshift regime.

astro-ph.CO↗

arXiv2013

Baryon Acoustic Oscillations in the Ly-α forest of BOSS quasars

We report a detection of the baryon acoustic oscillation (BAO) feature in the three-dimensional correlation function of the transmitted flux fraction in the \Lya forest of high-redshift quasars. The study uses 48,640 quasars in the redshift range $2.1\le z \le 3.5$ from the Baryon Oscillation Spectroscopic Survey (BOSS) of the third generation of the Sloan Digital Sky Survey (SDSS-III). At a mean redshift $z=2.3$, we measure the monopole and quadrupole components of the correlation function for separations in the range $20\hMpc<r<200\hMpc$. A peak in the correlation function is seen at a separation equal to $(1.01\pm0.03)$ times the distance expected for the BAO peak within a concordance $Λ$CDM cosmology. This first detection of the BAO peak at high redshift, when the universe was strongly matter dominated, results in constraints on the angular diameter distance $\da$ and the expansion rate $H$ at $z=2.3$ that, combined with priors on $H_0$ and the baryon density, require the existence of dark energy. Combined with constraints derived from Cosmic Microwave Background (CMB) observations, this result implies $H(z=2.3)=(224\pm8){\rm km\,s^{-1}Mpc^{-1}}$, indicating that the time derivative of the cosmological scale parameter $\dot{a}=H(z=2.3)/(1+z)$ is significantly greater than that measured with BAO at $z\sim0.5$. This demonstrates that the expansion was decelerating in the range $0.7<z<2.3$, as expected from the matter domination during this epoch. Combined with measurements of $H_0$, one sees the pattern of deceleration followed by acceleration characteristic of a dark-energy dominated universe.

astro-ph.CO↗

arXiv2011

Simulations of BAO reconstruction with a quasar Lyman-alpha survey

The imprint of Baryonic Acoustic Oscillations (BAO) on the matter power spectrum can be constrained using the neutral hydrogen density in the intergalactic medium as a tracer of the matter density. One of the goals of the Baryon Oscillation Spectroscopic Survey (BOSS) of the Sloan Digital Sky Survey (SDSS-III) is to derive the Hubble expansion rate and the angular scale from the BAO signal in the IGM. To this aim, the Lyman-alpha forest of 10^5 quasars will be observed in the redshift range 2.2<z<3.5 and over 10,000 deg^2. We simulated the BOSS QSO survey to estimate the statistical accuracy on the BAO scale determination provided by such a large scale survey. In particular, we discuss the effect of the poorly constrained estimate of the unabsorbed intrinsic quasar spectrum. The volume of current N-body simulations being too small for such studies, we resorted to Gaussian random field (GRF) simulations. We validated the use of GRFs by comparing the output of GRF simulations with that of the Horizon N-body simulation with the same initial conditions. Realistic mock samples of QSO Lyman-αforest were generated; their power spectrum was computed and fitted to obtain the BAO scale. The rms of the results for 100 different simulations provides an estimate of the statistical error expected from the BOSS survey. We confirm the results from Fisher matrix estimate. In the absence of error on the unabsorbed quasar spectrum, the BOSS quasar survey should measure the BAO scale with an error of the order of 2.3%, or the transverse and radial BAO scales separately with errors of the order of 6.8% and 3.9%, respectively. The significance of the BAO detection is assessed by an average Δχ^2=17 but for individual realizations Δχ^2 ranges from 2 t o 35. The error on the unabsorbed quasar spectrum increases the error on the BAO scale by 10 to 20% and results in a sub percent bias.

astro-ph.CO↗

arXiv2011

Variability selected high-redshift quasars on SDSS Stripe 82

The SDSS-III BOSS Quasar survey will attempt to observe z>2.15 quasars at a density of at least 15 per square degree to yield the first measurement of the Baryon Acoustic Oscillations in the Ly-alpha forest. To help reaching this goal, we have developed a method to identify quasars based on their variability in the u g r i z optical bands. The method has been applied to the selection of quasar targets in the SDSS region known as Stripe 82 (the Southern equatorial stripe), where numerous photometric observations are available over a 10-year baseline. This area was observed by BOSS during September and October 2010. Only 8% of the objects selected via variability are not quasars, while 90% of the previously identified high-redshift quasar population is recovered. The method allows for a significant increase in the z>2.15 quasar density over previous strategies based on optical (ugriz) colors, achieving a density of 24.0 deg^{-2} on average down to g~22 over the 220 deg^2 area of Stripe 82. We applied this method to simulated data from the Palomar Transient Factory and from Pan-STARRS, and showed that even with data that have sparser time sampling than what is available in Stripe 82, including variability in future quasar selection strategies would lead to increased target selection efficiency in the z>2.15 redshift range. We also found that Broad Absorption Line quasars are preferentially present in a variability than in a color selection.

astro-ph.CO↗

arXiv2011

A Principal Component Analysis of quasar UV spectra at z~3

From a Principal Component Analysis (PCA) of 78 z~3 high quality quasar spectra in the SDSS-DR7, we derive the principal components characterizing the QSO continuum over the full wavelength range available. The shape of the mean continuum, is similar to that measured at low-z (z~1), but the equivalent width of the emission lines are larger at low redshift. We calculate the correlation between fluxes at different wavelengths and find that the emission line fluxes in the red part of the spectrum are correlated with that in the blue part. We construct a projection matrix to predict the continuum in the Lyman-$α$ forest from the red part of the spectrum. We apply this matrix to quasars in the SDSS-DR7 to derive the evolution with redshift of the mean flux in the Lyman-$α$ forest due to the absorption by the intergalactic neutral hydrogen. A change in the evolution of the mean flux is apparent around z~3 in the sense of a steeper decrease of the mean flux at higher redshifts. The same evolution is found when the continuum is estimated from the extrapolation of a power-law continuum fitted in the red part of the quasar spectrum if a correction, derived from simple simulations, is applied. Our findings are consistent with previous determinations using high spectral resolution data. We provide the PCA eigenvectors over the wavelength range 1020-2000 Å and the distribution of their weights that can be used to simulate QSO mock spectra.

astro-ph.CO↗

arXiv2009

QSO Selection and Photometric Redshifts with Neural Networks

Baryonic Acoustic Oscillations (BAO) and their effects on the matter power spectrum can be studied by using the Lyman-alpha absorption signature of the matter density field along quasar (QSO) lines of sight. A measurement sufficiently accurate to provide useful cosmological constraints requires the observation of ~100000 quasars in the redshift range 2.2<z<3.5 over ~8000 deg2. Such a survey is planned by the Baryon Oscillation Spectroscopic Survey (BOSS) project of the Sloan Digital Sky Survey (SDSS-III).In practice, one needs a stellar rejection of more than two orders of magnitude with a selection efficiency for quasars better than 50% up to magnitudes as large as g ~ 22. To obtain an appropriate target list and estimate quasar redshifts, we have developed an Artificial Neural Networks (NN) with a multilayer perceptron architecture. The input variables are photometric measurements, i.e. the object magnitudes and their errors in the five bands (ugriz) of the SDSS photometry. For target selection, we achieve a non-quasar point-like object rejection of 99.6% and 98.5% for a quasar efficiency of, respectively, 50% and 85%. The photometric redshift precision is of the order of 0.1 over the region relevant for BAO studies.

astro-ph.CO↗

arXiv2008

Reconstruction of HI power spectra with radio-interferometers to study dark energy

Among the tools available for the study of the dark energy driving the expansion of the Universe, Baryon Acoustic Oscillations (BAO) and their effects on the matter power spectrum are particularly attractive. It was recently proposed to study these oscillations by mapping the 21cm emission of the neutral hydrogen in the redshift range $0.5<z<3$. We discuss here the precision of such measurements using radio-interferometers consisting of arrays of dishes or north-south oriented cylinders. We then discuss the resulting uncertainties on the BAO scales and the sensitivity to the parameters of the Dark Energy equation of state.

astro-ph↗

arXiv2001

A Component Based Approach to Scientific Workflow Management

CRISTAL is a distributed scientific workflow system used in the manufacturing and production phases of HEP experiment construction at CERN. The CRISTAL project has studied the use of a description driven approach, using meta- modelling techniques, to manage the evolving needs of a large physics community. Interest from such diverse communities as bio-informatics and manufacturing has motivated the CRISTAL team to re-engineer the system to customize functionality according to end user requirements but maximize software reuse in the process. The next generation CRISTAL vision is to build a generic component architecture from which a complete software product line can be generated according to the particular needs of the target enterprise. This paper discusses the issues of adopting a component product line based approach and our experiences of software reuse.

physics.ins-det↗

arXiv2001

Object Serialization and Deserialization Using XML

Interoperability of potentially heterogeneous databases has been an ongoing research issue for a number of years in the database community. With the trend towards globalization of data location and data access and the consequent requirement for the coexistence of new data stores with legacy systems, the cooperation and data interchange between data repositories has become increasingly important. The emergence of the eXtensible Markup Language (XML) as a database independent representation for data offers a suitable mechanism for transporting data between repositories. This paper describes a research activity within a group at CERN (called CMS) towards identifying and implementing database serialization and deserialization methods that can be used to replicate or migrate objects across the network between CERN and worldwide centres using XML to serialize the contents of multiple objects resident in object-oriented databases.

physics.ins-det↗

arXiv2001

The Reification of Patterns in the Design of Description-Driven Systems

To address the issues of reusability and evolvability in designing self- describing systems, this paper proposes a pattern-based, object-oriented, description-driven system architecture. The proposed architecture embodies four pillars - first, the adoption of a multi-layered meta-modeling architecture and reflective meta-level architecture, second, the identification of four data modeling relationships that must be made explicit such that they can be examined and modified dynamically, third, the identification of five design patterns which have emerged from practice and have proved essential in providing reusable building blocks for data management, and fourth, the encoding of the structural properties of the five design patterns by means of one pattern, the Graph pattern. The CRISTAL research project served as the basis onto which the pattern-based meta-object approach has been applied. The proposed architecture allows the realization of reusability and adaptability, and is fundamental in the specification of self-describing data management components.

physics.ins-det↗

arXiv1999

Design Patterns for Description-Driven Systems

In data modelling, product information has most often been handled separately from process information. The integration of product and process models in a unified data model could provide the means by which information could be shared across an enterprise throughout the system lifecycle from design through to production. Recently attempts have been made to integrate these two separate views of systems through identifying common data models. This paper relates description-driven systems to multi-layer architectures and reveals where existing design patterns facilitate the integration of product and process models and where patterns are missing or where existing patterns require enrichment for this integration. It reports on the construction of a so-called description-driven system which integrates Product Data Management (PDM) and Workflow Management (WfM) data models through a common meta-model.

physics.ins-det↗

arXiv1999

Getting Physics Data From the CMS ECAL Construction Database

CMS ECAL physicists must be able to extract physics characteristics from the ECAL construction database for the calibration of sets of detector components. Other applications, such as geometry for simulation and physics event reconstruction, will also need to extract data from the construction database. In each case, application software needs to query the construction database and to extract data that satisfies a particular view. These viewpoints are defined for a specific purpose (e.g. simulation, slow control, calibration) and data must be extracted into the viewpoint for a set of defined detector components (e.g. readout channels) called physics elements. The ECAL construction database follows an object-oriented design to maximise flexibility and reusability. An meta-modelling approach has been taken in its design, which promotes self-description and a degree of data independence. A query facility is being provided to allow navigation around so-called meta-objects in the construction database, facilitating the extraction of physics data into a particular viewpoint. This paper outlines how viewpoints can be populated with data extracted from the construction database, for a set of detector elements relevant for analysis.

physics.ins-det↗