arXiv subjects

J. -P. Tetienne

Publications and source records attributed to J. -P. Tetienne.

At least 19 recordsLinked to original sources

arXiv2024

3D-mapping and manipulation of photocurrent in an optoelectronic diamond device

Characterising charge transport in a material is central to the understanding of its electrical properties, and can usually only be inferred from bulk measurements of derived quantities such as current flow. Establishing connections between host material impurities and transport properties in emerging electronics materials, such as wide bandgap semiconductors, demands new diagnostic methods tailored to these unique systems, and the presence of optically-active defect centers in these materials offers a non-perturbative, in-situ characterisation system. Here, we combine charge-state sensitive optical microscopy and photoelectric detection of nitrogen-vacancy (NV) centres to directly image the flow of charge carriers inside a diamond optoelectronic device, in 3D and with temporal resolution. We optically control the charge state of background impurities inside the diamond on-demand, resulting in drastically different current flow such as filamentary channels nucleating from specific, defective regions of the device. We then optically engineered conducting channels that control carrier flow, key steps towards optically reconfigurable, wide bandgap designer optoelectronics. We anticipate our approach might be extended to probe other wide-bandgap semiconductors (SiC, GaN) relevant to present and emerging electronic technologies.

cond-mat.mtrl-sci↗

arXiv2023

Handheld device for non-contact thermometry via optically detected magnetic resonance of proximate diamond sensors

Optically detected magnetic resonance (ODMR) spectroscopy of defect-rich semiconductors is being increasingly exploited for realising a variety of practical quantum sensing devices. A prime example is the on-going development of compact magnetometers based on the nitrogen-vacancy (NV) defect in diamond for the remote sensing of magnetic signals with high accuracy and sensitivity. In these applications, the ODMR-active material is integrated into the overall apparatus to form a self-contained sensor. However, some emerging applications require the sensing material to be in physical contact with an external object of interest, thus requiring an independent readout device. Here we present an ODMR-meter, a compact device specially designed to allow convenient, contactless monitoring of ODMR in a target object, and demonstrate its application to temperature monitoring with NV defects. Our prototype is composed of a handheld readout head (integrating all the necessary optical components and a microwave antenna) and a control box connected to a laptop computer, all made primarily from commercial off-the-shelf components. We test our device using an NV-rich bulk diamond as the object, demonstrate a temperature sensitivity of $10~{\rm mK}/\sqrt{\rm Hz}$ in static conditions, and demonstrate the feasibility of handheld operation. The limitations to measurement speed, sensitivity and accuracy are discussed. The presented device may find immediate use in medical and industrial applications where accurate thermometry is required, and can be extended to magnetic field measurements.

physics.app-ph↗

arXiv2022

On the creation of near-surface nitrogen-vacancy centre ensembles by implantation of type Ib diamond

Dense, near-surface (within 10 nm) ensembles of nitrogen-vacancy (NV) centres in diamond are rapidly moving into prominence as the workhorse of a variety of envisaged applications, ranging from the imaging of fast-fluctuating magnetic signals to the facilitation of nuclear hyperpolarisation. Unlike their bulk counterparts, near-surface ensembles suffer from charge stability issues and reduced NV formation efficiency due to the diamond surface's role as a vacancy sink during annealing and an electron sink afterwards. To this end, work is ongoing to determine the best methods for producing high-quality ensembles in this regime. Here we examine the prospects for creating such ensembles cost-effectively by implanting nitrogen-rich type Ib diamond with electron donors, aiming to exploit the high bulk nitrogen density to combat surface-induced band bending in the process. This approach has previously been successful at creating deeper ensembles, however we find that in the near-surface regime there are fewer benefits over nitrogen implantation into pure diamond substrates. Our results suggest that control over diamond surface termination during annealing is key to successfully creating high-yield near-surface NV ensembles generally, and implantation into type Ib diamond may be worth revisiting once that has been accomplished.

cond-mat.other↗

arXiv2022

Untrained physically informed neural network for image reconstruction of magnetic field sources

Predicting measurement outcomes from an underlying structure often follows directly from fundamental physical principles. However, a fundamental challenge is posed when trying to solve the inverse problem of inferring the underlying source-configuration based on measurement data. A key difficulty arises from the fact that such reconstructions often involve ill-posed transformations and that they are prone to numerical artefacts. Here, we develop a numerically efficient method to tackle this inverse problem for the reconstruction of magnetisation maps from measured magnetic stray field images. Our method is based on neural networks with physically inferred loss functions to efficiently eliminate common numerical artefacts. We report on a significant improvement in reconstruction over traditional methods and we show that our approach is robust to different magnetisation directions, both in- and out-of-plane, and to variations of the magnetic field measurement axis orientation. While we showcase the performance of our method using magnetometry with Nitrogen Vacancy centre spins in diamond, our neural-network-based approach to solving inverse problems is agnostic to the measurement technique and thus is applicable beyond the specific use-case demonstrated in this work.

physics.comp-ph↗

arXiv2022

Aberration control in quantitative widefield quantum microscopy

Widefield quantum microscopy based on nitrogen-vacancy (NV) centres in diamond has emerged as a powerful technique for quantitative mapping of magnetic fields with a sub-micron resolution. However, the accuracy of the technique has not been characterised in detail so far. Here we show that optical aberrations in the imaging system may cause large systematic errors in the measured quantity beyond trivial blurring. We introduce a simple theoretical framework to model these effects, which extends the concept of a point spread function to the domain of spectral imaging. Using this model, the magnetic field imaging of test magnetic samples is simulated under various scenarios, and the resulting errors quantified. We then apply the model to previously published data, show that apparent magnetic anomalies can be explained by the presence of optical aberrations, and demonstrate a post-processing technique to retrieve the source quantity with improved accuracy. This work presents a guide to predict and mitigate aberration induced artefacts in quantitative NV-based widefield imaging and in spectral imaging more generally.

physics.optics↗

arXiv2022

Varied magnetic phases in a van der Waals easy-plane antiferromagnet revealed by nitrogen-vacancy center microscopy

Interest in van der Waals materials often stems from a desire to miniaturise existing technologies by exploiting their intrinsic layered structure to create near atomically-thin components that do not suffer from surface defects. One appealing property is easily-switchable yet robust magnetic order, a quality only sparsely demonstrated in the case of in-plane anisotropy. In this work, we use widefield nitrogen-vacancy (NV) center magnetic imaging to measure the properties of individual flakes of CuCrP$_2$S$_6$, a multiferroic van der Waals magnet known to exhibit weak easy-plane anisotropy in the bulk. We chart the crossover between in-plane ferromagnetism in thin flakes down to the trilayer, and the bulk behaviour dominated by a low-field spin-flop transition. Further, by exploiting the directional dependence of NV center magnetometry, we are able to observe an instance of a predominantly out-of-plane ferromagetic phase near zero field, in contradiction with expectation and previous experiments on the bulk material. We attribute this to the presence of surface anisotropies arising from the sample preparation process or exposure to the ambient environment, which is expected to have more general implications for a broader class of weakly anisotropic van der Waals magnets.

cond-mat.mes-hall↗

arXiv2022

Imaging current paths in silicon photovoltaic devices with a quantum diamond microscope

Magnetic imaging with nitrogen-vacancy centers in diamond, also known as quantum diamond microscopy, has emerged as a useful technique for the spatial mapping of charge currents in solid-state devices. In this work, we investigate an application to photovoltaic (PV) devices, where the currents are induced by light. We develop a widefield nitrogen-vacancy microscope that allows independent stimulus and measurement of the PV device, and test our system on a range of prototype crystalline silicon PV devices. We first demonstrate micrometer-scale vector magnetic field imaging of custom PV devices illuminated by a focused laser spot, revealing the internal current paths in both short-circuit and open-circuit conditions. We then demonstrate time-resolved imaging of photocurrents in an interdigitated back-contact solar cell, detecting current build-up and subsequent decay near the illumination point with microsecond resolution. This work presents a versatile and accessible analysis platform that may find distinct application in research on emerging PV technologies.

cond-mat.mes-hall↗

arXiv2021

Quantum microscopy with van der Waals heterostructures

Quantum microscopes based on solid-state spin quantum sensors have recently emerged as powerful tools for probing material properties and physical processes in regimes not accessible to classical sensors, especially on the nanoscale. Such microscopes have already found utility in a variety of problems, from imaging magnetism and charge transport in nanoscale devices, to mapping remanent magnetic fields from ancient rocks and biological organisms. However, applications of quantum microscopes have so far relied on sensors hosted in a rigid, three-dimensional crystal, typically diamond, which limits their ability to closely interact with the sample under study. Here we demonstrate a versatile and robust quantum microscope using quantum sensors embedded within a thin layer of a van der Waals (vdW) material, hexagonal boron nitride (hBN). To showcase the capabilities of this platform, we assemble several active vdW heterostructures, with an hBN layer acting as the quantum sensor. We demonstrate time-resolved, simultaneous temperature and magnetic imaging near the Curie temperature of a vdW ferromagnet as well as apply this unique microscope to map out charge currents and Joule heating in graphene. By enabling intimate proximity between sensor and sample, potentially down to a single atomic layer, the hBN quantum sensor represents a paradigm shift for nanoscale quantum sensing and microscopy. Moreover, given the ubiquitous use of hBN in modern materials and condensed matter physics research, we expect our technique to find rapid and broad adoption in these fields, further motivated by the prospect of performing in-situ chemical analysis and noise spectroscopy using advanced quantum sensing protocols.

cond-mat.mes-hall↗

arXiv2021

An Integrated Widefield Probe for Practical Diamond Nitrogen-Vacancy Microscopy

The widefield diamond nitrogen-vacancy (NV) microscope is a powerful instrument for imaging magnetic fields. However, a key limitation impeding its wider adoption is its complex operation, in part due to the difficulty of precisely interfacing the sensor and sample to achieve optimum spatial resolution. Here we demonstrate a solution to this interfacing problem that is both practical and reliably minimizes NV-sample standoff. We built a compact widefield NV microscope which incorporates an integrated widefield diamond probe with full position and angular control, and developed a systematic alignment procedure based on optical interference fringes. Using this platform, we imaged an ultrathin (1 nm) magnetic film test sample, and conducted a detailed study of the spatial resolution. We reproducibly achieved an estimated NV-sample standoff (and hence spatial resolution) of at most $\sim2~μ$m across a $\sim0.5$ mm field of view. Guided by these results, we suggest future improvements for approaching the optical diffraction limit. This work is a step towards realizing a widefield NV microscope suitable for routine high-throughput mapping of magnetic fields.

cond-mat.mes-hall↗

arXiv2021

Widefield quantum microscopy with nitrogen-vacancy centers in diamond: strengths, limitations, and prospects

A dense layer of nitrogen-vacancy (NV) centers near the surface of a diamond can be interrogated in a widefield optical microscope to produce spatially resolved maps of local quantities such as magnetic field, electric field and lattice strain, providing potentially valuable information about a sample or device placed in proximity. Since the first experimental realization of such a widefield NV microscope in 2010, the technology has seen rapid development and demonstration of applications in various areas across condensed matter physics, geoscience and biology. This Perspective analyzes the strengths and shortcomings of widefield NV microscopy in order to identify the most promising applications and guide future development. We begin with a brief review of quantum sensing with ensembles of NV centers, and the experimental implementation of widefield NV microscopy. We then compare this technology to alternative microscopy techniques commonly employed to probe magnetic materials and charge flow distributions. Current limitations in spatial resolution, measurement accuracy, magnetic sensitivity, operating conditions and ease of use, are discussed. Finally, we identify the technological advances that solve the aforementioned limitations, and argue that their implementation would result in a practical, accessible, high-throughput widefield NV microscope.

physics.app-ph↗

arXiv2021

Hyperpolarisation of external nuclear spins using nitrogen-vacancy centre ensembles

The nitrogen-vacancy (NV) centre in diamond has emerged as a candidate to non-invasively hyperpolarise nuclear spins in molecular systems to improve the sensitivity of nuclear magnetic resonance (NMR) experiments. Several promising proof of principle experiments have demonstrated small-scale polarisation transfer from single NVs to hydrogen spins outside the diamond. However, the scaling up of these results to the use of a dense NV ensemble, which is a necessary prerequisite for achieving realistic NMR sensitivity enhancement, has not yet been demonstrated. In this work, we present evidence for a polarising interaction between a shallow NV ensemble and external nuclear targets over a micrometre scale, and characterise the challenges in achieving useful polarisation enhancement. In the most favourable example of the interaction with hydrogen in a solid state target, a maximum polarisation transfer rate of $\approx 7500$ spins per second per NV is measured, averaged over an area containing order $10^6$ NVs. Reduced levels of polarisation efficiency are found for liquid state targets, where molecular diffusion limits the transfer. Through analysis via a theoretical model, we find that our results suggest implementation of this technique for NMR sensitivity enhancement is feasible following realistic diamond material improvements.

cond-mat.mes-hall↗

arXiv2020

Diamond spin sensors: A new way to probe nanomagnetism

Studies of individual quantum systems, which have led to considerable progress in our understanding of quantum physics, have traditionally been associated with atomic gases. In the last decades however, the emphasis has shifted towards solid-state systems, which are much more practical for applications. In particular, a new field has recently emerged that is concerned with the study of quantum systems based on single spins localized near point defects in crystalline solids. One such system is the nitrogen-vacancy (NV) defect in diamond. Initially used as an experimental breadboard for testing concepts of quantum physics and quantum computation, the NV defect was soon proposed as a sensitive magnetometer, capable of detecting minute magnetic fields, down to ultimate level of single spins. This atomic-sized magnetometer can be used as a standalone sensor, or integrated into an imaging system providing spatial resolution down to the atomic scale. Diamond-based instruments thus offer new pathways to probe the magnetism of matter from the mesoscale down to the nanoscale. This book chapter gives an overview of the field of diamond-based magnetic sensing and imaging, with an emphasis on already demonstrated applications of this technology. The chapter is divided into three main sections. In Section 2, the underlying physics and methods of diamond-based magnetometry are described. Section 3 is devoted to various experimental implementations that employ this new class of sensors for magnetic sensing and imaging. Finally, some recent applications are presented in Section 4.

cond-mat.mtrl-sci↗

arXiv2020

Prospects for nuclear spin hyperpolarisation of molecular samples using nitrogen-vacancy centres in diamond

After initial proof-of-principle demonstrations, optically pumped nitrogen-vacancy (NV) centres in diamond have been proposed as a non-invasive platform to achieve hyperpolarisation of nuclear spins in molecular samples over macroscopic volumes and enhance the sensitivity in nuclear magnetic resonance (NMR) experiments. In this work, we model the process of polarisation of external samples by NV centres and theoretically evaluate their performance in a range of scenarios. We find that average nuclear spin polarisations exceeding 10% can in principle be generated over macroscopic sample volumes ($\gtrsimμ$L) with a careful engineering of the system's geometry to maximise the diamond-sample contact area. The fabrication requirements and other practical challenges are discussed. We then explore the possibility of exploiting local polarisation enhancements in nano/micro-NMR experiments based on NV centres. For micro-NMR, we find that modest signal enhancements over thermal polarisation (by 1-2 orders of magnitude) can in essence be achieved with existing technology, with larger enhancements achievable via micro-structuring of the sample/substrate interface. However, there is generally no benefit for nano-NMR where the detection of statistical polarisation provides the largest signal-to-noise ratio. This work will guide future experimental efforts to integrate NV-based hyperpolarisation to NMR systems.

cond-mat.mes-hall↗

arXiv2020

Comparison of different methods of nitrogen-vacancy layer formation in diamond for widefield quantum microscopy

Thin layers of near-surface nitrogen-vacancy (NV) defects in diamond substrates are the workhorse of NV-based widefield magnetic microscopy, which has applications in physics, geology and biology. Several methods exist to create such NV layers, which generally involve incorporating nitrogen atoms (N) and vacancies (V) into the diamond through growth and/or irradiation. While there have been detailed studies of individual methods, a direct side-by-side experimental comparison of the resulting magnetic sensitivities is still missing. Here we characterise, at room and cryogenic temperatures, $\approx100$ nm thick NV layers fabricated via three different methods: 1) low-energy carbon irradiation of N-rich high-pressure high-temperature (HPHT) diamond, 2) carbon irradiation of $δ$-doped chemical vapour deposition (CVD) diamond, 3) low-energy N$^+$ or CN$^-$ implantation into N-free CVD diamond. Despite significant variability within each method, we find that the best HPHT samples yield similar magnetic sensitivities (within a factor 2 on average) to our $δ$-doped samples, of $<2$~$μ$T Hz$^{-1/2}$ for DC magnetic fields and $<100$~nT Hz$^{-1/2}$ for AC fields (for a $400$~nm~$\times~400$~nm pixel), while the N$^+$ and CN$^-$ implanted samples exhibit an inferior sensitivity by a factor 2-5, at both room and low temperature. We also examine the crystal lattice strain caused by the respective methods and discuss the implications this has for widefield NV imaging. The pros and cons of each method, and potential future improvements, are discussed. This study highlights that low-energy irradiation of HPHT diamond, despite its relative simplicity and low cost, is a competitive method to create thin NV layers for widefield magnetic imaging.

physics.app-ph↗

arXiv2020

Improved current density and magnetisation reconstruction through vector magnetic field measurements

Stray magnetic fields contain significant information about the electronic and magnetic properties of condensed matter systems. For two-dimensional (2D) systems, stray field measurements can even allow full determination of the source quantity. For instance, a 2D map of the stray magnetic field can be uniquely transformed into the 2D current density that gave rise to the field and, under some conditions, into the equivalent 2D magnetisation. However, implementing these transformations typically requires truncation of the initial data and involves singularities that may introduce errors, artefacts, and amplify noise. Here we investigate the possibility of mitigating these issues through vector measurements. For each scenario (current reconstruction and magnetisation reconstruction) the different possible reconstruction pathways are analysed and their performances compared. In particular, we find that the simultaneous measurement of both in-plane components ($B_x$ and $B_y$) enables near-ideal reconstruction of the current density, without singularity or truncation artefacts, which constitutes a significant improvement over reconstruction based on a single component (e.g. $B_z$). On the other hand, for magnetisation reconstruction, a single measurement of the out-of-plane field ($B_z$) is generally the best choice, regardless of the magnetisation direction. We verify these findings experimentally using nitrogen-vacancy magnetometry in the case of a 2D current density and a 2D magnet with perpendicular magnetisation.

physics.app-ph↗

arXiv2019

Quantum bath control with nuclear spin state selectivity via pulse-adjusted dynamical decoupling

Dynamical decoupling (DD) is a powerful method for controlling arbitrary open quantum systems. In quantum spin control, DD generally involves a sequence of timed spin flips ($π$ rotations) arranged to average out or selectively enhance coupling to the environment. Experimentally, errors in the spin flips are inevitably introduced, motivating efforts to optimise error-robust DD. Here we invert this paradigm: by introducing particular control "errors" in standard DD, namely a small constant deviation from perfect $π$ rotations (pulse adjustments), we show we obtain protocols that retain the advantages of DD while introducing the capabilities of quantum state readout and polarisation transfer. We exploit this nuclear quantum state selectivity on an ensemble of nitrogen-vacancy centres in diamond to efficiently polarise the $^{13}$C quantum bath. The underlying physical mechanism is generic and paves the way to systematic engineering of pulse-adjusted protocols with nuclear state selectivity for quantum control applications.

quant-ph↗

arXiv2019

The non-vanishing effect of detuning errors in dynamical decoupling based quantum sensing experiments

Characteristic dips appear in the coherence traces of a probe qubit when dynamical decoupling (DD) is applied in synchrony with the precession of target nuclear spins, forming the basis for nanoscale nuclear magnetic resonance (NMR). The frequency of the microwave control pulses is chosen to match the qubit transition but this can be detuned from resonance by experimental errors, hyperfine coupling intrinsic to the qubit, or inhomogeneous broadening. The detuning acts as an additional static field which is generally assumed to be completely removed in Hahn echo and DD experiments. Here we demonstrate that this is not the case in the presence of finite pulse-durations, where a detuning can drastically alter the coherence response of the probe qubit, with important implications for sensing applications. Using the electronic spin associated with a nitrogen-vacancy centre in diamond as a test qubit system, we analytically and experimentally study the qubit coherence response under CPMG and XY8 dynamical decoupling control schemes in the presence of finite pulse-durations and static detunings. Most striking is the splitting of the NMR resonance under CPMG, whereas under XY8 the amplitude of the NMR signal is modulated. Our work shows that the detuning error must not be neglected when extracting data from quantum sensor coherence traces.

quant-ph↗

arXiv2019

Enhanced widefield quantum sensing with nitrogen-vacancy ensembles using diamond nanopillar arrays

Quantum sensors based on optically active defects in diamond such as the nitrogen vacancy (NV) centre represent a promising platform for nanoscale sensing and imaging of magnetic, electric, temperature and strain fields. Enhancing the optical interface to such defects is key to improving the measurement sensitivity of these systems. Photonic nanostructures are often employed in the single emitter regime for this purpose, but their applicability to widefield sensing with NV ensembles remains largely unexplored. Here we fabricate and characterize closely-packed arrays of diamond nanopillars, each hosting its own dense, near-surface ensemble of NV centres. We explore the optimal geometry for diamond nanopillars hosting NV ensembles and realise enhanced spin and photoluminescence properties which lead to increased measurement sensitivities (greater than a factor of 3) when compared to unpatterned surfaces. Utilising the increased measurement sensitivity, we image the mechanical stress tensor in each nanopillar across the arrays and show the fabrication process has negligible impact on in-built stress compared to the unpatterned surface. Our results demonstrate that photonic nanostructuring of the diamond surface is a viable strategy for increasing the sensitivity of ensemble-based widefield sensing and imaging.

physics.optics↗