SearcharxivSearch

arXiv subjects

J. -R. Marquès

Publications and source records attributed to J. -R. Marquès.

10 recordsLinked to original sources

Experimental evidence of stimulated Raman re-scattering in laser-plasma interaction

We present the first experimental evidence of stimulated Raman re-scattering of a laser in plasma: The scattered light produced by the Raman instability is intense enough to scatter again through the same instability. Although never observed, re-scattering processes have been studied theoretically and numerically for many years in the context of inertial confinement fusion (ICF), since the plasma waves they generate could bootstrap thermal electrons to high energies [Phys. Rev. Lett. \textbf{110}, 165001 (2013)], preheating the fuel and degrading ignition conditions. Our experimental results are obtained with a spatially smoothed laser beam consisting of many speckles, with an average intensity around $10^{14}$ W/cm$^2$ and close to $10^{15}$ W/cm$^2$ in the speckles, such as those usually used in direct-drive ICF. Kinetic and hydrodynamic simulations show good agreement with the observations.

physics.plasm-ph

Collisionless Shock Acceleration of protons in a plasma slab produced in a gas jet by the collision of two laser-driven hydrodynamic shockwaves

We recently proposed a new technique of plasma tailoring by laser-driven hydrodynamic shockwaves generated on both sides of a gas jet [J.-R. Marquès et al., Phys. Plasmas 28, 023103 (2021)]. In the continuation of this numerical work, we studied experimentally the influence of the tailoring on proton acceleration driven by a high-intensity picosecond-laser, in three cases: without tailoring, by tailoring only the entrance side of the ps-laser, or both sides of the gas jet. Without tailoring the acceleration is transverse to the laser axis, with a low-energy exponential spectrum, produced by Coulomb explosion. When the front side of the gas jet is tailored, a forward acceleration appears, that is significantly enhanced when both the front and back sides of the plasma are tailored. This forward acceleration produces higher energy protons, with a peaked spectrum, and is in good agreement with the mechanism of Collisionless Shock Acceleration (CSA). The spatio-temporal evolution of the plasma profile was characterized by optical shadowgraphy of a probe beam. The refraction and absorption of this beam was simulated by post-processing 3D hydrodynamic simulations of the plasma tailoring. Comparison with the experimental results allowed to estimate the thickness and near-critical density of the plasma slab produced by tailoring both sides of the gas jet. These parameters are in good agreement with those required for CSA.

physics.plasm-ph

Dynamics of nanosecond laser pulse propagation and of associated instabilities in a magnetized underdense plasma

The propagation and energy coupling of intense laser beams in plasmas are critical issues in laser-driven inertial confinement fusion. Applying magnetic fields to such a setup has been evoked to enhance fuel confinement and heating, and mitigate laser energy losses. Here we report on experimental measurements demonstrating improved transmission and increased smoothing of a high-power laser beam propagating in an underdense magnetized plasma. We also measure enhanced backscattering, which our simulations show is due to hot electrons confinement, thus leading to reduced target preheating.

physics.plasm-ph

Numerical study of Langmuir wave coalescence in laser-plasma interaction

Type-III-burst radio signals can be mimicked in the laboratory via laser-plasma interaction. Instead of an electron beam generating Langmuir waves (LW) in the interplanetary medium, the LWs are created by a laser interacting with a millimeter-sized plasma through the stimulated Raman instability. In both cases, the LWs feed the Langmuir decay instability which scatters them in several directions. The resulting LWs may couple to form electromagnetic emission at twice the plasma frequency, which has been detected in the interplanetary medium, and recently in a laboratory laser experiment [Marquès et al. Phys. Rev. Lett. 124, 135001 (2020)]. This article presents the first numerical analysis of this laser configuration using particle-in-cell simulations, providing details on the wave spectra that are too difficult to measure in experiments. The role of some parameters is addressed, with a focus on laser intensity, in order to illustrate the behavior of the electromagnetic emission's angular distribution and polarization.

physics.plasm-ph

Over-critical sharp-gradient plasma slab produced by the collision of laser-induced blast-waves in a gas jet; Application to high-energy proton acceleration

The generation of thin and high density plasma slabs at high repetition rate is a key issue for ultra-high intensity laser applications. We present a scheme to create such plasma slabs, based on the propagation and collision in a gas jet of two counter-propagating blast waves (BW). Each BW is launched by a sudden and local heating induced by a nanosecond laser beam that propagates along the side of the jet. The resulting cylindrical BW expands perpendicular to the beam. The shock front, bent by the gas jet density gradient, pushes and compresses the plasma toward the jet center. By using two parallel ns laser beams, this scheme enables to tailor independently two opposite sides of the jet, while avoiding the damage risks associated with counterpropagating laser beams. A parametric study is performed using two and three dimensional hydrodynamic, as well as kinetic simulations. The BWs bending combined with the collision in a stagnation regime increases the density by more than 10 times and generates a very thin (down to few microns), near to over-critical plasma slab with a high density contrast (> 100), and a lifetime of a few hundred picoseconds. Two dimensional particle-in-cell simulations are used to study the influence of plasma tailoring on proton acceleration by a high-intensity sub-picosecond laser pulse. Tailoring the plasma not only at the entrance but also the exit side of the ps-pulse enhances the proton beam collimation, increases significantly the number of high energy protons, as well as their maximum energy.

physics.plasm-ph

A laser-plasma interaction experiment for solar burst studies

A new experimental platform based on laser-plasma interaction is proposed to explore the fundamental processes of wave coupling at the origin of interplanetary radio emissions. It is applied to the study of electromagnetic (EM) emission at twice the plasma frequency ($2ω_p$) observed during solar bursts and thought to result from the coalescence of two Langmuir waves (LWs). In the interplanetary medium, the first LW is excited by electron beams, while the second is generated by electrostatic decay of Langmuir waves. In the present experiment, instead of an electron beam, an energetic laser propagating through a plasma excites the primary LW, with characteristics close to those at near-Earth orbit. The EM radiation at $2ω_p$ is observed at different angles. Its intensity, spectral evolution and polarization confirm the LW-coalescence scenario.

physics.plasm-ph

Joule-level high effiency energy transfer to sub-picosecond laser pulses by a plasma-based amplifier

Laser plasma amplification of sub-picosecond pulses above the Joule level is demonstrated, a major milestone for this scheme to become a solution for the next-generation of ultra-high intensity lasers. By exploring over 6 orders of magnitude the influence of the incident seed intensity on Brillouin laser amplification, we reveal the importance of a minimum intensity to ensure an early onset of the self-similar regime, and a large energy transfer with a very high efficiency, up to 20%. Evidence of energy losses of the seed by spontaneous backward Raman is found at high amplification. The first three-dimensional envelope simulations of the sub-picosecond amplification were performed, supplemented by one-dimensional PIC simulations. Comparisons with the experimental results demonstrate the capability of quantitative predictions on the transferred energy. The global behavior of the amplification process, is reproduced, including the evolution of the spatial profile of the amplified seed.

physics.plasm-ph

Laser-driven strong magnetostatic fields with applications to charged beam transport and magnetized high energy-density physics

Powerful laser-plasma processes are explored to generate discharge currents of a few $100\,$kA in coil targets, yielding magnetostatic fields (B-fields) in excess of $0.5\,$kT. The quasi-static currents are provided from hot electron ejection from the laser-irradiated surface. According to our model, describing qualitatively the evolution of the discharge current, the major control parameter is the laser irradiance $I_{\mathrm{las}}λ_{\mathrm{las}}^2$. The space-time evolution of the B-fields is experimentally characterized by high-frequency bandwidth B-dot probes and by proton-deflectometry measurements. The magnetic pulses, of ns-scale, are long enough to magnetize secondary targets through resistive diffusion. We applied it in experiments of laser-generated relativistic electron transport into solid dielectric targets, yielding an unprecedented 5-fold enhancement of the energy-density flux at $60 \,\mathrm{μm}$ depth, compared to unmagnetized transport conditions. These studies pave the ground for magnetized high-energy density physics investigations, related to laser-generated secondary sources of radiation and/or high-energy particles and their transport, to high-gain fusion energy schemes and to laboratory astrophysics.

physics.plasm-ph

Laser-driven platform for generation and characterization of strong quasi-static magnetic fields

Quasi-static magnetic-fields up to $800\,$T are generated in the interaction of intense laser pulses ($500\,$J, $1\,$ns, $10^{17}\,$W/cm$^2$) with capacitor-coil targets of different materials. The reproducible magnetic-field peak and rise-time, consistent with the laser pulse duration, were accurately inferred from measurements with GHz-bandwidth inductor pickup coils (B-dot probes). Results from Faraday rotation of polarized optical laser light and deflectometry of energetic proton beams are consistent with the B-dot probe measurements at the early stages of the target charging, up to $t\approx 0.35\,$ns, and then are disturbed by radiation and plasma effects. The field has a dipole-like distribution over a characteristic volume of $1\,$mm$^3$, which is coherent with theoretical expectations. These results demonstrate a very efficient conversion of the laser energy into magnetic fields, thus establishing a robust laser-driven platform for reproducible, well characterized, generation of quasi-static magnetic fields at the kT-level, as well as for magnetization and accurate probing of high-energy-density samples driven by secondary powerful laser or particle beams.

physics.plasm-ph

Anomalous Self-Generated Electrostatic Fields in Nanosecond Laser-Plasma Interaction

Electrostatic (E) fields associated with the interaction of a well-controlled, high-power, nanosecond laser pulse with an underdense plasma are diagnosed by proton radiography. Using a current 3D wave propagation code equipped with nonlinear and nonlocal hydrodynamics, we can model the measured E-fields that are driven by the laser ponderomotive force in the region where the laser undergoes filamentation. However, strong fields of up to 110 MV/m measured in the first millimeter of propagation cannot be reproduced in the simulations. This could point to the presence of unexpected strong thermal electron pressure gradients possibly linked to ion acoustic turbulence, thus emphasizing the need for the development of full kinetic collisional simulations in order to properly model laser-plasma interaction in these strongly nonlinear conditions.

physics.plasm-ph