arXiv subjects

J. -U. Pott

Publications and source records attributed to J. -U. Pott.

At least 19 recordsLinked to original sources

arXiv2024

The MICADO first light imager for the ELT: off-axis performance of PSF reconstruction

The highest scientific return, for adaptive optics (AO) observations, is achieved with a reliable reconstruction of the PSF. This is especially true for MICADO@ELT. In this presentation, we will focus on extending the MICADO PSF reconstruction (PSF-R) method to the off-axis case. Specifically, a novel approach based on temporal-based tomography of AO telemetry data has been recently implemented. Results from the PSF-R of both simulated and real data show that, at half isoplanatic angle distances, a precision of about 10-15% is achievable in both Strehl ratio and full-width at half maximum, paving the way to extend the MICADO PSF-R tool also to the multi-conjugated AO case.

astro-ph.IM↗

arXiv2024

The first spectroscopic IR reverberation programme on Mrk 509

Near IR spectroscopic reverberation of Active Galactic Nuclei (AGN) potentially allows the infrared (IR) broad line region (BLR) to be reverberated alongside the disc and dust continua, while the spectra can also reveal details of dust astro-chemistry. Here, we describe results of a short pilot study (17 near-IR spectra over a 183 d period) for Mrk 509. The spectra give a luminosity-weighted dust radius of $\langle R_{\mathrm{d,lum}} \rangle = 186 \pm 4$ light-days for blackbody (large grain dust), consistent with previous (photometric) reverberation campaigns, whereas carbon and silicate dust give much larger radii. We develop a method of calibrating spectral data in objects where the narrow lines are extended beyond the slit width. We demonstrate this by showing our resultant photometric band light curves are consistent with previous results, with a hot dust lag at >40 d in the K band, clearly different from the accretion disc response at <20 d in the z band. We place this limit of 40 d by demonstrating clearly that the modest variability that we do detect in the H and K band does not reverberate on time-scales of less than 40 d. We also extract the Pa$β$ line light curve, and find a lag which is consistent with the optical BLR H$β$ line of $\sim$70-90 d. This is important as direct imaging of the near-IR BLR is now possible in a few objects, so we need to understand its relation to the better studied optical BLR.

astro-ph.GA↗

arXiv2022

The outer orbit of the high-mass stellar triple system Herschel 36 determined with the VLTI

Multiplicity is a ubiquitous characteristic of massive stars. Multiple systems offer us a unique observational constraint on the formation of high-mass systems. Herschel 36 A is a massive triple system composed of a close binary (Ab1-Ab2) and an outer component (Aa). We measured the orbital motion of the outer component of Herschel 36 A using infrared interferometry with the AMBER and PIONIER instruments of ESO's Very Large Telescope Interferometer. Our immediate aims are to constrain the masses of all components of this system and to determine if the outer orbit is co-planar with the inner one. Reported spectroscopic data for all three components of this system and our interferometric data allow us to derive full orbital solutions for the outer orbit Aa-Ab and the inner orbit Ab1-Ab2. For the first time, we derive the absolute masses of mAa = 22.3 +/- 1.7 M_sun, mAb1 = 20.5 +/- 1.5 M_sun and mAb2 = 12.5 +/- 0.9 M_sun. Despite not being able to resolve the close binary components, we infer the inclination of their orbit by imposing the same parallax as the outer orbit. Inclinations derived from the inner and outer orbits imply a modest difference of about 22 deg. between the orbital planes. We discuss this result and the formation of Herschel 36 A in the context of Core Accretion and Competitive Accretion models, which make different predictions regarding the statistic of the relative orbital inclinations.

astro-ph.SR↗

arXiv2021

Lessons learned from SPHERE for the astrometric strategy of the next generation of exoplanet imaging instruments

Measuring the orbits of directly-imaged exoplanets requires precise astrometry at the milliarcsec level over long periods of time due to their wide separation to the stars ($\gtrsim$10 au) and long orbital period ($\gtrsim$20 yr). To reach this challenging goal, a specific strategy was implemented for the instrument Spectro-Polarimetric High-contrast Exoplanet REsearch (SPHERE), the first dedicated exoplanet imaging instrument at the Very Large Telescope of the European Southern Observatory (ESO). A key part of this strategy relies on the astrometric stability of the instrument over time. We monitored for five years the evolution of the optical distortion, pixel scale, and orientation to the True North of SPHERE images using the near-infrared instrument IRDIS. We show that the instrument calibration achieves a positional stability of $\sim$1 mas over 2$"$ field of views. We also discuss the SPHERE astrometric strategy, issues encountered in the course of the on-sky operations, and lessons learned for the next generation of exoplanet imaging instruments on the Extremely Large Telescope being built by ESO.

astro-ph.IM↗

arXiv2021

High-precision astrometric studies in direct imaging with SPHERE

Orbital monitoring of exoplanetary and stellar systems is fundamental for analysing their architecture, dynamical stability and evolution, and mechanisms of formation. Current high-contrast extreme-adaptive optics imagers like SPHERE, GPI, and SCExAO+CHARIS explore the population of giant exoplanets and brown dwarf and stellar companions beyond typically 10 au, covering generally a small fraction of the orbit (<20%) leading to degeneracies and biases in the orbital parameters. Precise and robust measurements over time of the position of the companions are critical, which require good knowledge of the instrumental limitations and dedicated observing strategies. The homogeneous dedicated calibration strategy for astrometry implemented for SPHERE has facilitated high-precision studies by its users since its start of operation in 2014. As the precision of exoplanet imaging instruments is now reaching milliarcseconds and is expected to improve with the upcoming facilities, we initiated a community effort, triggered by the SPHERE experience, to share lessons learned for high-precision astrometry in direct imaging. A homogeneous strategy would strongly benefit the VLT community, in synergy with VLTI instruments like GRAVITY/GRAVITY+, future instruments like ERIS and MAVIS, and in preparation for the exploitation of the ELT's first instruments MICADO, HARMONI, and METIS.

astro-ph.IM↗

arXiv2020

Photonics-based mid-infrared interferometry: 4-year results of the ALSI project and future prospects

In this contribution, we review the results of the ALSI project (Advanced Laser-writing for Stellar Interferometry), aimed at assessing the potential of ultrafast laser writing to fabricate mid-infared integrated optics (IO) devices with performance compatible with an implementation in real interferometric instruments like Hi5 or PFI. Waveguides for the L, L' and M bands with moderate propagation losses were manufactured in Gallium Lanthanum Sulfide and ZBLAN glasses and used to develop photonic building blocks as well as a full mid-IR 4-telescope beam combiner. We discuss the advantages and disadvantages of the tested combiners and discuss a possible roadmap for the continuation of this work.

astro-ph.IM↗

arXiv2019

Optical continuum photometric reverberation mapping of the Seyfert-1 galaxy Mrk509

We present the results of a two year optical continuum photometric reverberation mapping campaign carried out on the nucleus of the Seyfert-1 galaxy Mrk509. Specially designed narrow-band filters were used in order to mitigate the line and pseudo-continuum contamination of the signal from the broad line region, while allowing for high-accuracy flux-calibration over a large field of view. We obtained light curves with a sub-day time sampling and typical flux uncertainties of $1\%$. The high photometric precision allowed us to measure inter-band continuum time delays of up to $\sim 2$ days across the optical range. The time delays are consistent with the relation $τ\propto λ^{4/3}$ predicted for an optically thick and geometrically thin accretion disk model. The size of the disk is, however, a factor of 1.8 larger than predictions based on the standard thin-disk theory. We argue that, for the particular case of Mrk509, a larger black hole mass due to the unknown geometry scaling factor can reconcile the difference between the observations and theory.

astro-ph.GA↗

arXiv2019

The first spectroscopic dust reverberation programme on active galactic nuclei: the torus in NGC 5548

We have recently initiated the first spectroscopic dust reverberation programme on active galactic nuclei (AGN) in the near-infrared. Spectroscopy enables measurement of dust properties, such as flux, temperature and covering factor, with higher precision than photometry. In particular, it enables measurement of both luminosity-based dust radii and dust response times. Here we report results from a one-year campaign on NGC 5548. The hot dust responds to changes in the irradiating flux with a lag time of ~70 light-days, similar to what was previously found in photometric reverberation campaigns. The mean and rms spectra are similar, implying that the same dust component dominates both the emission and the variations. The dust lag time is consistent with the luminosity-based dust radius only if we assume a wavelength-independent dust emissivity-law, i.e. a blackbody, which is appropriate for grains of large sizes (of a few microns). For such grains the dust temperature is ~1450 K. Therefore, silicate grains have most likely evaporated and carbon is the main chemical component. But the hot dust is not close to its sublimation temperature, contrary to popular belief. This is further supported by our observation of temperature variations largely consistent with a heating/cooling process. Therefore, the inner dust-free region is enlarged and the dusty torus rather a "dusty wall", whose inner radius is expected to be luminosity-invariant. The dust-destruction mechanism that enlarges the dust-free region seems to partly affect also the dusty region. We observe a cyclical decrease in dust mass with implied dust reformation times of ~5-6 months.

astro-ph.GA↗

arXiv2018

Analyzing temporal variations of AGN emission line profiles in the context of (dusty) cloud structure formation in the broad line region

The formation processes and the exact appearance of the dust torus and broad line region (BLR) of active galactic nuclei (AGN) are under debate. Theoretical studies show a possible connection between the dust torus and BLR through a common origin in the accretion disk. However observationally the dust torus and BLR are typically studied separately. NGC~4151 is possibly one of the best suited Seyfert~1 galaxies for simultaneous examinations because of its high number of both photometric and spectroscopic observations in the past. Here we compare changes of the dust radius to shape variations of broad emission lines (BEL). While the radius of the dust torus decreased by almost a factor of two from 2004 to 2006 shape variations can be seen in the red wing of BELs of NGC~4151. These simultaneous changes are discussed in a dust and BEL formation scheme. We also use the BEL shape variations to assess possible cloud distributions, especially in azimuthal direction, which could be responsible for the observed variations. Our findings can best be explained in the framework of a dust inflated accretion disk. The changes in the BELs suggest that this dusty cloud formation does not happen continuously, and over the whole accretion disk, but on the contrary in spatially confined areas over rather short amount of times. We derive limits to the azimuthal extension of the observed localized BEL flux enhancement event.

astro-ph.GA↗

arXiv2018

GRAVITY chromatic imaging of Eta Car's core

Eta Car is one of the most intriguing luminous blue variables in the Galaxy. Observations and models at different wavelengths suggest a central binary with a 5.54 yr period residing in its core. 2D and 3D radiative transfer and hydrodynamic simulations predict a primary with a dense and slow stellar wind that interacts with the faster and lower density wind of the secondary. The wind-wind collision scenario suggests that the secondary's wind penetrates the primary's wind creating a low-density cavity in it, with dense walls where the two winds interact. We aim to trace the inner ~5-50 au structure of Eta Car's wind-wind interaction, as seen through BrG and, for the first time, through the He I 2s-2p line. We have used spectro-interferometric observations with GRAVITY at the VLTI. Our modeling of the continuum allows us to estimate its FWHM angular size close to 2 mas and an elongation ratio of 1.06 +/- 0.05 over a PA = 130 +/- 20 deg. Our CMFGEN modeling helped us to confirm that the role of the secondary should be taken into account to properly reproduce the observed BrG and He I lines. Chromatic images across BrG reveal a southeast arc-like feature, possibly associated to the hot post-shocked winds flowing along the cavity wall. The images of He I 2s-2p served to constrain the 20 mas structure of the line-emitting region. The observed morphology of He I suggests that the secondary is responsible for the ionized material that produces the line profile. Both the BrG and the He I 2s-2p maps are consistent with previous hydrodynamical models of the colliding wind scenario. Future dedicated simulations together with an extensive interferometric campaign are necessary to refine our constraints on the wind and stellar parameters of the binary, which finally will help us predict the evolutionary path of Eta Car.

astro-ph.SR↗

arXiv2018

The MICADO first light imager for ELT: its astrometric performance

We report on our ongoing efforts to ensure that the MICADO NIR imager reaches differential absolute (often abbreviated: relative) astrometric performance limited by the SNR of typical observations. The exceptional 39m diameter collecting area in combination with a powerful multi-conjugate adaptive optics system (called MAORY) brings the nominal centroiding error, which scales as FWHM/SNR, down to a few 10 uas. Here we show that an exceptional effort is needed to provide a system which delivers adequate and calibrateable astrometric performance over the full field of view (up to 53 arcsec diameter).

astro-ph.IM↗

arXiv2018

Hi-5: a potential high-contrast thermal near-infrared imager for the VLTI

Hi-5 is a high-contrast (or high dynamic range) infrared imager project for the VLTI. Its main goal is to characterize young extra-solar planetary systems and exozodiacal dust around southern main-sequence stars. In this paper, we present an update of the project and key technology pathways to improve the contrast achieved by the VLTI. In particular, we discuss the possibility to use integrated optics, proven in the near-infrared, in the thermal near-infrared (L and M bands, 3-5~$μ$m) and advanced fringe tracking strategies. We also address the strong exoplanet science case (young exoplanets, planet formation, and exozodiacal disks) offered by this wavelength regime as well as other possible science cases such as stellar physics (fundamental parameters and multiplicity) and extragalactic astrophysics (active galactic nuclei and fundamental constants). Synergies and scientific preparation for other potential future instruments such as the Planet Formation Imager are also briefly discussed.

astro-ph.IM↗

arXiv2018

The path towards high-contrast imaging with the VLTI: the Hi-5 project

The development of high-contrast capabilities has long been recognized as one of the top priorities for the VLTI. As of today, the VLTI routinely achieves contrasts of a few 10$^{-3}$ in the near-infrared with PIONIER (H band) and GRAVITY (K band). Nulling interferometers in the northern hemisphere and non-redundant aperture masking experiments have, however, demonstrated that contrasts of at least a few 10$^{-4}$ are within reach using specific beam combination and data acquisition techniques. In this paper, we explore the possibility to reach similar or higher contrasts on the VLTI. After reviewing the state-of-the-art in high-contrast infrared interferometry, we discuss key features that made the success of other high-contrast interferometric instruments (e.g., integrated optics, nulling, closure phase, and statistical data reduction) and address possible avenues to improve the contrast of the VLTI by at least one order of magnitude. In particular, we discuss the possibility to use integrated optics, proven in the near-infrared, in the thermal near-infrared (L and M bands, 3-5 $μ$m), a sweet spot to image and characterize young extra-solar planetary systems. Finally, we address the science cases of a high-contrast VLTI imaging instrument and focus particularly on exoplanet science (young exoplanets, planet formation, and exozodiacal disks), stellar physics (fundamental parameters and multiplicity), and extragalactic astrophysics (active galactic nuclei and fundamental constants). Synergies and scientific preparation for other potential future instruments such as the Planet Formation Imager are also briefly discussed.

astro-ph.IM↗

arXiv2017

GRAVITY spectro-interferometric study of the massive multiple stellar system HD 93 206 A

Characterization of the dynamics of massive star systems and the astrophysical properties of the interacting components are a prerequisite for understanding their formation and evolution. Optical interferometry at milliarcsecond resolution is a key observing technique for resolving high-mass multiple compact systems. Here we report on VLTI/GRAVITY, Magellan/FIRE, and MPG2.2m/FEROS observations of the late-O/early-B type system HD 93206 A, which is a member of the massive cluster Collinder 228 in the Carina nebula complex. With a total mass of about 90 M_sun, it is one of the most compact massive-quadruple systems known. In addition to measuring the separation and position angle of the outer binary Aa - Ac, we observe BrG and HeI variability in phase with the orbital motion of the two inner binaries. From the differential phases analysis, we conclude that the BrG emission arises from the interaction regions within the components of the individual binaries, which is consistent with previous models for the X-ray emission of the system based on wind-wind interaction. With an average 3-sigma deviation of ~15 deg, we establish an upper limit of p ~ 0.157 mas (0.35 AU) for the size of the BrG line-emitting region. Future interferometric observations with GRAVITY using the 8m UTs will allow us to constrain the line-emitting regions down to angular sizes of 20 uas (0.05 AU at the distance of the Carina nebula).

astro-ph.SR↗

arXiv2016

Space Telescope and Optical Reverberation Mapping Project VI: reverberating Disk Models for NGC 5548

We conduct a multiwavelength continuum variability study of the Seyfert 1 galaxy NGC 5548 to investigate the temperature structure of its accretion disk. The 19 overlapping continuum light curves (1158 to 9157 angstroms) combine simultaneous HST , Swift , and ground-based observations over a 180 day period from 2014 January to July. Light-curve variability is interpreted as the reverberation response of the accretion disk to irradiation by a central time-varying point source. Our model yields the disk inclination, i, temperature T1 at 1 light day from the black hole, and a temperature-radius slope, alpha. We also infer the driving light curve and find that it correlates poorly with both the hard and soft X-ray light curves, suggesting that the X-rays alone may not drive the ultraviolet and optical variability over the observing period. We also decompose the light curves into bright, faint, and mean accretion-disk spectra. These spectra lie below that expected for a standard blackbody accretion disk accreting at L/LEdd = 0.1

astro-ph.GA↗

arXiv2016

An overview of the mid-infrared spectro-interferometer MATISSE: science, concept, and current status

MATISSE is the second-generation mid-infrared spectrograph and imager for the Very Large Telescope Interferometer (VLTI) at Paranal. This new interferometric instrument will allow significant advances by opening new avenues in various fundamental research fields: studying the planet-forming region of disks around young stellar objects, understanding the surface structures and mass loss phenomena affecting evolved stars, and probing the environments of black holes in active galactic nuclei. As a first breakthrough, MATISSE will enlarge the spectral domain of current optical interferometers by offering the L and M bands in addition to the N band. This will open a wide wavelength domain, ranging from 2.8 to 13 um, exploring angular scales as small as 3 mas (L band) / 10 mas (N band). As a second breakthrough, MATISSE will allow mid-infrared imaging - closure-phase aperture-synthesis imaging - with up to four Unit Telescopes (UT) or Auxiliary Telescopes (AT) of the VLTI. Moreover, MATISSE will offer a spectral resolution range from R ~ 30 to R ~ 5000. Here, we present one of the main science objectives, the study of protoplanetary disks, that has driven the instrument design and motivated several VLTI upgrades (GRA4MAT and NAOMI). We introduce the physical concept of MATISSE including a description of the signal on the detectors and an evaluation of the expected performances. We also discuss the current status of the MATISSE instrument, which is entering its testing phase, and the foreseen schedule for the next two years that will lead to the first light at Paranal.

astro-ph.IM↗

arXiv2016

Simultaneous Water Vapor and Dry Air Optical Path Length Measurements and Compensation with the Large Binocular Telescope Interferometer

The Large Binocular Telescope Interferometer uses a near-infrared camera to measure the optical path length variations between the two AO-corrected apertures and provide high-angular resolution observations for all its science channels (1.5-13 $μ$m). There is however a wavelength dependent component to the atmospheric turbulence, which can introduce optical path length errors when observing at a wavelength different from that of the fringe sensing camera. Water vapor in particular is highly dispersive and its effect must be taken into account for high-precision infrared interferometric observations as described previously for VLTI/MIDI or the Keck Interferometer Nuller. In this paper, we describe the new sensing approach that has been developed at the LBT to measure and monitor the optical path length fluctuations due to dry air and water vapor separately. After reviewing the current performance of the system for dry air seeing compensation, we present simultaneous H-, K-, and N-band observations that illustrate the feasibility of our feedforward approach to stabilize the path length fluctuations seen by the LBTI nuller.

astro-ph.IM↗

arXiv2016

MICADO: first light imager for the E-ELT

MICADO will equip the E-ELT with a first light capability for diffraction limited imaging at near-infrared wavelengths. The instrument's observing modes focus on various flavours of imaging, including astrometric, high contrast, and time resolved. There is also a single object spectroscopic mode optimised for wavelength coverage at moderately high resolution. This contribution provides an overview of the key functionality of the instrument, outlining the scientific rationale for its observing modes. The interface between MICADO and the adaptive optics system MAORY that feeds it is summarised. The design of the instrument is discussed, focussing on the optics and mechanisms inside the cryostat, together with a brief overview of the other key sub-systems.

astro-ph.IM↗