arXiv subjects

J. A. Boedo

Publications and source records attributed to J. A. Boedo.

4 recordsLinked to original sources

arXiv2026

First step toward multi machine ELM energy scalings and extrapolations to SPARC and ITER

It is shown that the ELM energy loss normalized by the plasma stored energy (ΔEELM/Wplasma) for high-density small/QCE ELM regimes scales inversely with the separatrix turbulence parameter a_t. In contrast, the neoclassical electron collisionality at the pedestal top, nu*e,neo, expected to regulate ΔEELM/Wplasma according to the Loarte scaling (Plasma Phys. Control. Fusion 2003 45 1549), does not adequately capture ΔEELM/Wplasma data for peeling-ballooning-limited type-I ELMs and ballooning-limited small/QCE ELMs, limiting its applicability for extrapolation to one scenario window. A multi-machine database including seven tokamaks and with ΔEELM/Wplasma ranging from 0.5% to 14%, has been analyzed. A regression analysis on only type-I ELMs yields ((ΔE_ELM)/W_plasma )_(Type-I ) [%]=6.8*T_(e,ped)^0.03 n_(e,ped)^(-0.4) \k{appa}^(-0.4) R_major^0.4, corresponding to ΔEELM/Wplasma =4.5% for nominal SPARC pedestal parameters and 12% for the ITER D-T Q=10 scenario. For the small/QCE ELM class, however, as a_t increases, the pedestal moves toward a ballooning-limited boundary, the toroidal mode number increases, the ELM frequency rises following the scaling f_ELM=46e^((2.25*a_t)), and ΔEELM/Wplasma decreases via the relation (ΔE_ELM)/W_plasma [%]=1.6e^(-(α_t/2)). For SPARC QCE-relevant a_t=0.86 and ITER high-fueling scenario a_t = 0.64, the scaling favorably predicts ΔEELM/Wplasma of 1.0% and 1.2%, respectively, with values below 1% if the small/QCE ELM regime is pushed beyond a_t >1. The small/QCE ELM-fitted results represent an initial step toward future analysis on broader datasets, which will be necessary to improve the accuracy of projections for future reactor-relevant scenarios.

physics.plasm-ph↗

arXiv2021

Validation of edge turbulence codes against the TCV-X21 diverted L-mode reference case

Self-consistent full-size turbulent-transport simulations of the divertor and SOL of existing tokamaks have recently become feasible. This enables the direct comparison of turbulence simulations against experimental measurements. In this work, we perform a series of diverted Ohmic L-mode discharges on the TCV tokamak, building a first-of-a-kind dataset for the validation of edge turbulence models. This dataset, referred to as TCV-X21, contains measurements from 5 diagnostic systems -- giving a total of 45 1- and 2-D comparison observables in two toroidal magnetic field directions. The dataset is used to validate three flux-driven 3D fluid-turbulence models: GBS, GRILLIX and TOKAM3X. With each model, we perform simulations of the TCV-X21 scenario, tuning the particle and power source rates to achieve a reasonable match of the upstream separatrix value of density and electron temperature. We find that the simulations match the experimental profiles for most observables at the OMP -- both in terms of profile shape and absolute magnitude -- while a poorer agreement is found towards the divertor targets. The match between simulation and experiment is seen to be sensitive to the value of the resistivity, the heat conductivities, the power injection rate and the choice of sheath boundary conditions. Additionally, despite targeting a sheath-limited regime, the discrepancy between simulations and experiment also suggests that the neutral dynamics should be included. The results of this validation show that turbulence models are able to perform simulations of existing devices and achieve reasonable agreement with experimental measurements. Where disagreement is found, the validation helps to identify how the models can be improved. By publicly releasing the experimental dataset, this work should help to guide and accelerate the development of predictive turbulence simulations of the edge and SOL.

physics.plasm-ph↗

arXiv2021

Theory-based scaling laws of near and far scrape-off layer widths in single-null L-mode discharges

Theory-based scaling laws of the near and far scrape-off layer (SOL) widths are analytically derived for L-mode diverted tokamak discharges by using a two-fluid model. The near SOL pressure and density decay lengths are obtained by leveraging a balance among the power source, perpendicular turbulent transport across the separatrix, and parallel losses at the vessel wall, while the far SOL pressure and density decay lengths are derived by using a model of intermittent transport mediated by filaments. The analytical estimates of the pressure decay length in the near SOL is then compared to the results of three-dimensional, flux-driven, global, two-fluid turbulence simulations of L-mode diverted tokamak plasmas, and validated against experimental measurements taken from an experimental multi-machine database of divertor heat flux profiles, showing in both cases a very good agreement. Analogously, the theoretical scaling law for the pressure decay length in the far SOL is compared to simulation results and to experimental measurements in TCV L-mode discharges, pointing out the need of a large multi-machine database for the far SOL decay lengths.

physics.plasm-ph↗

arXiv2017

Impurity seeding for suppression of the near Scrape-Off Layer heat flux feature in tokamak limited plasmas

In inboard-limited plasmas, foreseen to be used in future fusion reactors start-up and ramp down phases, the Scrape-Off Layer (SOL) exhibits two regions: the "near" and "far" SOL. The steep radial gradient of the parallel heat flux associated with the near SOL can result in excessive thermal loads onto the solid surfaces, damaging them and/or limiting the operational space of a fusion reactor. In this article, leveraging the results presented in [F. Nespoli et al., Nuclear Fusion 2017], we propose a technique for the mitigation and suppression of the near SOL heat flux feature by impurity seeding. First successful experimental results from the TCV tokamak are presented and discussed.

physics.plasm-ph↗