SearcharxivSearch

arXiv subjects

J. A. Guzik

Publications and source records attributed to J. A. Guzik.

At least 19 recordsLinked to original sources

TESS Cycle 2 observations of roAp stars with 2-min cadence data

We present the results of a systematic search of the Transiting Exoplanet Survey Satellite (TESS) 2-min cadence data for new rapidly oscillating Ap (roAp) stars observed during the Cycle 2 phase of its mission. We find seven new roAp stars previously unreported as such and present the analysis of a further 25 roAp stars that are already known. Three of the new stars show multiperiodic pulsations, while all new members are rotationally variable stars, leading to almost 70 per cent (22) of the roAp stars presented being $α^2$ CVn-type variable stars. We show that targeted observations of known chemically peculiar stars are likely to overlook many new roAp stars, and demonstrate that multi-epoch observations are necessary to see pulsational behaviour changes. We find a lack of roAp stars close to the blue edge of the theoretical roAp instability strip, and reaffirm that mode instability is observed more frequently with precise, space-based observations. In addition to the Cycle 2 observations, we analyse TESS data for all known roAp stars. This amounts to 18 further roAp stars observed by TESS. Finally, we list six known roAp stars that TESS is yet to observe. We deduce that the incidence of roAp stars amongst the Ap star population is just 5.5 per cent, raising fundamental questions about the conditions required to excite pulsations in Ap stars. This work, coupled with our previous work on roAp stars in Cycle 1 observations, presents the most comprehensive, homogeneous study of the roAp stars in the TESS nominal mission, with a collection of 112 confirmed roAp stars in total.

astro-ph.SR

TESS Cycle 1 observations of roAp stars with 2-min cadence data

We present the results of a systematic search for new rapidly oscillating Ap (roAp) stars using the 2-min cadence data collected by the Transiting Exoplanet Survey Satellite (TESS) during its Cycle 1 observations. We identify 12 new roAp stars. Amongst these stars we discover the roAp star with the longest pulsation period, another with the shortest rotation period, and six with multiperiodic variability. In addition to these new roAp stars, we present an analysis of 44 known roAp stars observed by TESS during Cycle 1, providing the first high-precision and homogeneous sample of a significant fraction of the known roAp stars. The TESS observations have shown that almost 60 per cent (33) of our sample of stars are multiperiodic, providing excellent cases to test models of roAp pulsations, and from which the most rewarding asteroseismic results can be gleaned. We report four cases of the occurrence of rotationally split frequency multiplets that imply different mode geometries for the same degree modes in the same star. This provides a conundrum in applying the oblique pulsator model to the roAp stars. Finally, we report the discovery of non-linear mode interactions in $α$ Cir (TIC 402546736, HD 128898) around the harmonic of the principal mode -- this is only the second case of such a phenomenon.

astro-ph.SR

The first view of $δ$ Scuti and $γ$ Doradus stars with the TESS mission

We present the first asteroseismic results for $δ$ Scuti and $γ$ Doradus stars observed in Sectors 1 and 2 of the TESS mission. We utilise the 2-min cadence TESS data for a sample of 117 stars to classify their behaviour regarding variability and place them in the Hertzsprung-Russell diagram using Gaia DR2 data. Included within our sample are the eponymous members of two pulsator classes, $γ$ Doradus and SX Phoenicis. Our sample of pulsating intermediate-mass stars observed by TESS also allows us to confront theoretical models of pulsation driving in the classical instability strip for the first time and show that mixing processes in the outer envelope play an important role. We derive an empirical estimate of 74% for the relative amplitude suppression factor as a result of the redder TESS passband compared to the Kepler mission using a pulsating eclipsing binary system. Furthermore, our sample contains many high-frequency pulsators, allowing us to probe the frequency variability of hot young $δ$ Scuti stars, which were lacking in the Kepler mission data set, and identify promising targets for future asteroseismic modelling. The TESS data also allow us to refine the stellar parameters of SX Phoenicis, which is believed to be a blue straggler.

astro-ph.SR

Convection and Overshoot in models of gamma Doradus and delta Scuti stars

We investigate the pulsation properties of stellar models representative of $δ$ Scuti and $γ$ Doradus variables. We have calculated a grid of stellar models from 1.2 to 2.2 M$_{\odot}$, including the effects of both rotation and convective overshoot using MESA, and we investigate the pulsation properties of these models using GYRE. We discuss observable patterns in the frequency spacing for $p$ modes and the period spacings for g modes. Using the observable patterns in g mode period spacings, it may be possible to observationally constrain the convective overshoot and rotation of a model. We also calculate the pulsation constant (Q) for all models in our grid, and investigate the variation with convective overshoot and rotation. The variation in Q values of radial modes can be used to place constraints on the convective overshoot and rotation of stars in this region. As a test case, we apply this method to a sample of 22 high amplitude $δ$ Scuti stars (HADS), and provide estimates for the convective overshoot of the sample.

astro-ph.SR

A Distant Mirror: Solar Oscillations Observed on Neptune by the Kepler K2 Mission

Starting in December 2014, Kepler K2 observed Neptune continuously for 49 days at a 1-minute cadence. The goals consisted of studying its atmospheric dynamics (Simon et al. 2016), detecting its global acoustic oscillations (Rowe et al., submitted), and those of the Sun, which we report on here. We present the first indirect detection of solar oscillations in intensity measurements. Beyond the remarkable technical performance, it indicates how Kepler would see a star like the Sun. The result from the global asteroseismic approach, which consists of measuring the oscillation frequency at maximum amplitude "nu_max" and the mean frequency separation between mode overtones "Delta nu", is surprising as the nu_max measured from Neptune photometry is larger than the accepted value. Compared to the usual reference nu_max_sun = 3100 muHz, the asteroseismic scaling relations therefore make the solar mass and radius appear larger by 13.8 +/- 5.8 % and 4.3 +/- 1.9 % respectively. The higher nu_max is caused by a combination of the value of nu_max_sun, being larger at the time of observations than the usual reference from SOHO/VIRGO/SPM data (3160 +/- 10 muHz), and the noise level of the K2 time series, being ten times larger than VIRGO's. The peak-bagging method provides more consistent results: despite a low signal-to-noise ratio (SNR), we model ten overtones for degrees l=0,1,2. We compare the K2 data with simultaneous SOHO/VIRGO/SPM photometry and BiSON velocity measurements. The individual frequencies, widths, and amplitudes mostly match those from VIRGO and BiSON within 1 sigma, except for the few peaks with lowest SNR.

astro-ph.SR

Detection of Solar-Like Oscillations, Observational Constraints, and Stellar Models for $θ$ Cyg, the Brightest Star Observed by the {\it Kepler} Mission

$θ$ Cygni is an F3 spectral-type main-sequence star with visual magnitude V=4.48. This star was the brightest star observed by the original Kepler spacecraft mission. Short-cadence (58.8 s) photometric data using a custom aperture were obtained during Quarter 6 (June-September 2010) and subsequently in Quarters 8 and 12-17. We present analyses of the solar-like oscillations based on Q6 and Q8 data, identifying angular degree $l$ = 0, 1, and 2 oscillations in the range 1000-2700 microHz, with a large frequency separation of 83.9 plus/minus 0.4 microHz, and frequency with maximum amplitude 1829 plus/minus 54 microHz. We also present analyses of new ground-based spectroscopic observations, which, when combined with angular diameter measurements from interferometry and Hipparcos parallax, give T_eff = 6697 plus/minus 78 K, radius 1.49 plus/minus 0.03 solar radii, [Fe/H] = -0.02 plus/minus 0.06 dex, and log g = 4.23 plus/minus 0.03. We calculate stellar models matching the constraints using several methods, including using the Yale Rotating Evolution Code and the Asteroseismic Modeling Portal. The best-fit models have masses 1.35-1.39 solar masses and ages 1.0-1.6 Gyr. theta Cyg's T_eff and log g place it cooler than the red edge of the gamma Doradus instability region established from pre-Kepler ground-based observations, but just at the red edge derived from pulsation modeling. The pulsation models show gamma Dor gravity-mode pulsations driven by the convective-blocking mechanism, with frequencies of 1 to 3 cycles/day (11 to 33 microHz). However, gravity modes were not detected in the Kepler data, one signal at 1.776 cycles/day (20.56 microHz) may be attributable to a faint, possibly background, binary. Asteroseismic studies of theta Cyg and other A-F stars observed by Kepler and CoRoT, will help to improve stellar model physics and to test pulsation driving mechanisms.

astro-ph.SR

Unexpected series of regular frequency spacing of delta Scuti stars in the non-asymptotic regime -- II. Sample -- echelle diagrams and rotation

A sequence search method was developed for searching for regular frequency spacing in delta Scuti stars by visual inspection and algorithmic search. The sample contains 90 delta Scuti stars observed by CoRoT. An example is given to represent the visual inspection. The algorithm (SSA) is described in detail. The data treatment of the CoRoT light curves, the criteria for frequency filtering and the spacings derived by two methods (three approaches: VI, SSA and FT) are given for each target. Echelle diagrams are presented for 77 targets, for which at least one sequence of regular spacing was identified. Comparing the spacing and the shifts between pairs of echelle ridges revealed that at least one pair of echelle ridges is shifted to midway between the spacing for 22 stars. The estimated rotational frequencies compared to the shifts revealed rotationally split doublets, triplets and multiplets not only for single frequencies, but for the complete echelle ridges in 31 delta Scuti stars. Using several possible assumptions for the origin of the spacings, we derived the large separation ($Δν$), which are distributed along the mean density versus large separations relation derived from stellar models Suarez 2014.

astro-ph.SR

Unexpected series of regular frequency spacing of delta Scuti stars in the non-asymptotic regime -- I. The methodology

A sequence search method was developed to search regular frequency spacing in delta Scuti stars by visual inspection and algorithmic search. We searched for sequences of quasi-equally spaced frequencies, containing at least four members per sequence, in 90 delta Scuti stars observed by CoRoT. We found an unexpectedly large number of independent series of regular frequency spacing in 77 delta Scuti stars (from 1 to 8 sequences) in the non-asymptotic regime. We introduce the sequence search method presenting the sequences and echelle diagram of CoRoT 102675756 and the structure of the algorithmic search. Four sequences (echelle ridges) were found in the 5-21 d^{-1} region, where the pairs of the sequences are shifted (between 0.5-0.59 d^{-1}) by twice the value of the estimated rotational splitting frequency (0.269 d^{-1}). The general conclusions for the whole sample are also presented in this paper. The statistics of the spacings derived by the sequence search method, by FT and that of the shifts are also compared. In many stars, more than one almost equally valid spacing appeared. The model frequencies of FG Vir and their rotationally split components were used to reveal a possible explanation that one spacing is the large separation, while the other is a sum of the large separation and the rotational frequency. In CoRoT 102675756, the two spacings (2.249 and 1.977 d^{-1}) agree better with the sum of a possible 1.710 d^{-1} large separation and two or one times, respectively, the value of the rotational frequency.

astro-ph.SR

A New Generation of Los Alamos Opacity Tables

We present a new, publicly available, set of Los Alamos OPLIB opacity tables for the elements hydrogen through zinc. Our tables are computed using the Los Alamos ATOMIC opacity and plasma modeling code, and make use of atomic structure calculations that use fine-structure detail for all the elements considered. Our equation-of-state (EOS) model, known as ChemEOS, is based on the minimization of free energy in a chemical picture and appears to be a reasonable and robust approach to determining atomic state populations over a wide range of temperatures and densities. In this paper we discuss in detail the calculations that we have performed for the 30 elements considered, and present some comparisons of our monochromatic opacities with measurements and other opacity codes. We also use our new opacity tables in solar modeling calculations and compare and contrast such modeling with previous work.

astro-ph.SR

Properties of 42 Solar-type Kepler Targets from the Asteroseismic Modeling Portal

Recently the number of main-sequence and subgiant stars exhibiting solar-like oscillations that are resolved into individual mode frequencies has increased dramatically. While only a few such data sets were available for detailed modeling just a decade ago, the Kepler mission has produced suitable observations for hundreds of new targets. This rapid expansion in observational capacity has been accompanied by a shift in analysis and modeling strategies to yield uniform sets of derived stellar properties more quickly and easily. We use previously published asteroseismic and spectroscopic data sets to provide a uniform analysis of 42 solar-type Kepler targets from the Asteroseismic Modeling Portal (AMP). We find that fitting the individual frequencies typically doubles the precision of the asteroseismic radius, mass and age compared to grid-based modeling of the global oscillation properties, and improves the precision of the radius and mass by about a factor of three over empirical scaling relations. We demonstrate the utility of the derived properties with several applications.

astro-ph.SR

Behaviour of Pulsations in Hydrodynamic Models of Massive Stars

We have calculated the pulsations of massive stars using a nonlinear hydrodynamic code including time-dependent convection. The basic structure models are based on a standard grid published by Meynet et al. (1994). Using the basic structure, we calculated envelope models, which include the outer few percent of the star. These models go down to depths of at least 2 million K. These models, which range from 40 to 85 solar masses, show a range of pulsation behaviours. We find models with very long period pulsations ( $>$ 100 d), resulting in high amplitude changes in the surface properties. We also find a few models that show outburst-like behaviour. The details of this behaviour are discussed, including calculations of the resulting wind mass-loss rates.

astro-ph.SR

The Kep-Cont Mission: Continuing the observation of high-amplitude variable stars in the Kepler field of view

As a response to the Kepler white paper call, we propose to keep Kepler pointing to its current field of view and continue observing thousands of large amplitude variables (Cepheid, RR Lyrae and delta Scuti stars among others) with high cadence in the Kep-Cont Mission. The degraded pointing stability will still allow observation of these stars with reasonable (better than millimag) precision. The Kep-Cont mission will allow studying the nonradial modes in Blazhko-modulated and first overtone RR Lyrae stars and will give a better view on the period jitter of the only Kepler Cepheid in the field. With continued continuous observation of the Kepler RR Lyrae sample we may get closer to the origin of the century-old Blazhko problem. Longer time-span may also uncover new dynamical effects like apsidal motion in eclipsing binaries. A continued mission will have the advantage of providing unprecedented, many-years-long homogeneous and continuous photometric data of the same targets. We investigate the pragmatic details of such a mission and find a number of advantages, especially the minimal need of reprogramming of the flight software. Another undeniable advantage of the current field of view is the completed, ongoing and planned ground-based follow-up observations and allocated telescope times focusing on the current field. We emphasize that while we propose this continuation as an independent mission, we can easily share slots with e.g. planetary mission with a strong belief that both (or more) communities can still benefit from Kepler's current capabilities.

astro-ph.SR

The Kepler-SEP Mission: Harvesting the South Ecliptic Pole large-amplitude variables with Kepler

As a response to the white paper call, we propose to turn Kepler to the South Ecliptic Pole (SEP) and observe thousands of large amplitude variables for years with high cadence in the frame of the Kepler-SEP Mission. The degraded pointing stability will still allow observing these stars with reasonable (probably better than mmag) accuracy. Long-term continuous monitoring already proved to be extremely helpful to investigate several areas of stellar astrophysics. Space-based missions opened a new window to the dynamics of pulsation in several class of pulsating variable stars and facilitated detailed studies of eclipsing binaries. The main aim of this mission is to better understand the fascinating dynamics behind various stellar pulsational phenomena (resonances, mode coupling, chaos, mode selection) and interior physics (turbulent convection, opacities). This will also improve the applicability of these astrophysical tools for distance measurements, population and stellar evolution studies. We investigated the pragmatic details of such a mission and found a number of advantages: minimal reprogramming of the flight software, a favorable field of view, access to both galactic and LMC objects. However, the main advantage of the SEP field comes from the large sample of well classified targets, mainly through OGLE. Synergies and significant overlap (spatial, temporal and in brightness) with both ground- (OGLE, LSST) and space-based missions (GAIA, TESS) will greatly enhance the scientific value of the Kepler-SEP mission. GAIA will allow full characterization of the distance indicators. TESS will continuously monitor this field for at least one year, and together with the proposed mission provide long time series that cannot be obtained by other means. If Kepler-SEP program is successful, there is a possibility to place one of the so-called LSST "deep-drilling" fields in this region.

astro-ph.SR

KIC 4544587: an Eccentric, Short Period Binary System with delta Sct Pulsations and Tidally Excited Modes

We present Kepler photometry and ground based spectroscopy of KIC 4544587, a short-period eccentric eclipsing binary system with self-excited pressure and gravity modes, tidally excited modes, tidally influenced p modes, and rapid apsidal motion of 182 y per cycle. The primary and secondary components of KIC 4544587 reside within the delta Scuti and gamma Dor instability region of the Hurtzsprung-Russell diagram, respectively. By applying the binary modelling software PHOEBE to prewhitened Kepler photometric data and radial velocity data obtained using the William Herschel Telescope and 4-m Mayall telescope at KPNO, the fundamental parameters of this important system have been determined, including the stellar masses, 1.98+/-0.07 MSun and 1.60+/-0.06 MSun, and radii, 1.76+/-0.03 RSun and 1.42+/-0.02 RSun, for the primary and secondary components, respectively. Frequency analysis of the residual data revealed 31 modes, 14 in the gravity mode region and 17 in the pressure mode region. Of the 14 gravity modes 8 are orbital harmonics: a signature of tidal resonance. While the measured amplitude of these modes may be partially attributed to residual signal from binary model subtraction, we demonstrate through consideration of the folded light curve that these frequencies do in fact correspond to tidally excited pulsations. Furthermore, we present an echelle diagram of the pressure mode frequency region (modulo the orbital frequency) and demonstrate that the tides are also influencing the p modes. A first look at asteroseismology hints that the secondary component is responsible for the p modes, which is contrary to our expectation that the hotter star should pulsate in higher radial overtone, higher frequency p modes.

astro-ph.SR

Asteroseismology of KIC 11754974: a high-amplitude SX Phe pulsator in a 343-day binary system

The candidate SX Phe star KIC 11754974 shows a remarkably high number of combination frequencies in the Fourier amplitude spectrum: 123 of the 166 frequencies in our multi-frequency fit are linear combinations of independent modes. Predictable patterns in frequency spacings are seen in the Fourier transform of the light curve. We present an analysis of 180 d of short-cadence Kepler photometry and of new spectroscopic data for this evolved, late A-type star. We infer from the 1150-d, long-cadence light curve, and in two different ways, that our target is the primary of a 343-d, non-eclipsing binary system. According to both methods, the mass function is similar, f(M)=0.0207 +/- 0.0003 Msun. The observed pulsations are modelled extensively, using separate, state-of-the-art, time-dependent convection (TDC) and rotating models. The models match the observed temperature and low metallicity, finding a mass of 1.50-1.56 Msun. The models suggest the whole star is metal-poor, and that the low metallicity is not just a surface abundance peculiarity. This is the best frequency analysis of an SX Phe star, and the only Kepler δ Sct star to be modelled with both TDC and rotating models.

astro-ph.SR

A uniform asteroseismic analysis of 22 solar-type stars observed by Kepler

Asteroseismology with the Kepler space telescope is providing not only an improved characterization of exoplanets and their host stars, but also a new window on stellar structure and evolution for the large sample of solar-type stars in the field. We perform a uniform analysis of 22 of the brightest asteroseismic targets with the highest signal-to-noise ratio observed for 1 month each during the first year of the mission, and we quantify the precision and relative accuracy of asteroseismic determinations of the stellar radius, mass, and age that are possible using various methods. We present the properties of each star in the sample derived from an automated analysis of the individual oscillation frequencies and other observational constraints using the Asteroseismic Modeling Portal (AMP), and we compare them to the results of model-grid-based methods that fit the global oscillation properties. We find that fitting the individual frequencies typically yields asteroseismic radii and masses to \sim1% precision, and ages to \sim2.5% precision (respectively 2, 5, and 8 times better than fitting the global oscillation properties). The absolute level of agreement between the results from different approaches is also encouraging, with model-grid-based methods yielding slightly smaller estimates of the radius and mass and slightly older values for the stellar age relative to AMP, which computes a large number of dedicated models for each star. The sample of targets for which this type of analysis is possible will grow as longer data sets are obtained during the remainder of the mission.

astro-ph.SR

Comparison of Fe and Ni opacity calculations for a better understanding of pulsating stellar envelopes

Opacity is an important ingredient of the evolution of stars. The calculation of opacity coefficients is complicated by the fact that the plasma contains partially ionized heavy ions that contribute to opacity dominated by H and He. Up to now, the astrophysical community has greatly benefited from the work of the contributions of Los Alamos [1], Livermore [2] and the Opacity Project (OP) [3]. However unexplained differences of up to 50% in the radiative forces and Rosseland mean values for Fe have been noticed for conditions corresponding to stellar envelopes. Such uncertainty has a real impact on the understanding of pulsating stellar envelopes, on the excitation of modes, and on the identification of the mode frequencies. Temperature and density conditions equivalent to those found in stars can now be produced in laboratory experiments for various atomic species. Recently the photo-absorption spectra of nickel and iron plasmas have been measured during the LULI 2010 campaign, for temperatures between 15 and 40 eV and densities of ~3 mg/cm3. A large theoretical collaboration, the "OPAC", has been formed to prepare these experiments. We present here the set of opacity calculations performed by eight different groups for conditions relevant to the LULI 2010 experiment and to astrophysical stellar envelope conditions.

astro-ph.SR

Iron and Nickel spectral opacity calculations in conditions relevant for pulsating stellar envelopes and experiments

Seismology of stars is strongly developing. To address this question we have formed an international collaboration OPAC to perform specific experimental measurements, compare opacity calculations and improve the opacity calculations in the stellar codes [1]. We consider the following opacity codes: SCO, CASSANDRA, STA, OPAS, LEDCOP, OP, SCO-RCG. Their comparison has shown large differences for Fe and Ni in equivalent conditions of envelopes of type II supernova precursors, temperatures between 15 and 40 eV and densities of a few mg/cm3 [2, 3, 4]. LEDCOP, OPAS, SCO-RCG structure codes and STA give similar results and differ from OP ones for the lower temperatures and for spectral interval values [3]. In this work we discuss the role of Configuration Interaction (CI) and the influence of the number of used configurations. We present and include in the opacity code comparisons new HULLAC-v9 calculations [5, 6] that include full CI. To illustrate the importance of this effect we compare different CI approximations (modes) available in HULLAC-v9 [7]. These results are compared to previous predictions and to experimental data. Differences with OP results are discussed.

astro-ph.SR