Searcharxiv⌕ Search

arXiv subjects

J. Ballot

Publications and source records attributed to J. Ballot.

At least 91 records · Page 5Linked to original sources

Solar-like oscillations in red giants observed with Kepler: comparison of global oscillation parameters from different methods

The large number of stars for which uninterrupted high-precision photometric timeseries data are being collected with \textit{Kepler} and CoRoT initiated the development of automated methods to analyse the stochastically excited oscillations in main-sequence, subgiant and red-giant stars. Aims: We investigate the differences in results for global oscillation parameters of G and K red-giant stars due to different methods and definitions. We also investigate uncertainties originating from the stochastic nature of the oscillations. Methods: For this investigation we use Kepler data obtained during the first four months of operation. These data have been analysed by different groups using already published methods and the results are compared. We also performed simulations to investigate the uncertainty on the resulting parameters due to different realizations of the stochastic signal. Results: We obtain results for the frequency of maximum oscillation power (nu_max) and the mean large separation ( ) from different methods for over one thousand red-giant stars. The results for these parameters agree within a few percent and seem therefore robust to the different analysis methods and definitions used here. The uncertainties for nu_max and due to differences in realization noise are not negligible and should be taken into account when using these results for stellar modelling.

astro-ph.SR↗

Current methods for analyzing light curves of solar-like stars

CoRoT has allowed a quantitative leap for the solar-like-star seismology thanks to 5-month-long uninterrupted timeseries of high-precision photometric data. Kepler is also starting to deliver similar data. Now, several F and G main-sequence stars have been analyzed. The techniques developed to interpret light curves directly inherit from the experience got on the Sun with helioseismology. I describe in this review the methods currently used to analyze these light curves. First, these data provide an accurate determination of the stellar rotation rate. This is possible thanks to the magnetic activity of stars. The power spectra of light curves put also constraints on the stellar granulation, which can be directly compared to 3-D stellar atmosphere models; this shows still unexplained discrepancies. I then detailed a standard method for extracting p-mode characteristics (frequency, amplitude and lifetime). CoRoT has revealed unexpected short life times for F stars. Last, I also discuss errors and biases of mode frequencies, especially the ones due to the simplified description of the rotation generally used.

astro-ph.SR↗

Towards a detection of individual g modes in the Sun

Since the detection of the asymptotic properties of the dipole gravity modes in the Sun, the quest to find the individual gravity modes has continued. A deeper analysis of the GOLF/SoHO data unveils the presence of a pattern of peaks that could be interpreted as individual dipole gravity modes. The computed collapsed spectrum -around these candidate modes- uncovers the presence of a quasi constant frequency splitting, in contrast with regions where no g modes are expected in which the collapsogram gives random results. Besides, the same technique applied to VIRGO/SoHO unveils some common signals between both power spectra. Thus, we can identify and characterize the modes, for example, with their central frequency and splittings. This would open the path towards new investigations to better constrain the solar core.

astro-ph.SR↗

Gravity modes in rapidly rotating stars. Limits of perturbative methods

CoRoT and Kepler missions are now providing high-quality asteroseismic data for a large number of stars. Among intermediate-mass and massive stars, fast rotators are common objects. Taking the rotation effects into account is needed to correctly understand, identify, and interpret the observed oscillation frequencies of these stars. A classical approach is to consider the rotation as a perturbation. In this paper, we focus on gravity modes, such as those occurring in gamma Doradus, slowly pulsating B (SPB), or Be stars. We aim to define the suitability of perturbative methods. With the two-dimensional oscillation program (TOP), we performed complete computations of gravity modes -including the Coriolis force, the centrifugal distortion, and compressible effects- in 2-D distorted polytropic models of stars. We started with the modes l=1, n=1-14, and l=2-3, n=1-5,16-20 of a nonrotating star, and followed these modes by increasing the rotation rate up to 70% of the break-up rotation rate. We then derived perturbative coefficients and determined the domains of validity of the perturbative methods. Second-order perturbative methods are suited to computing low-order, low-degree mode frequencies up to rotation speeds ~100 km/s for typical gamma Dor stars or ~150 km/s for B stars. The domains of validity can be extended by a few tens of km/s thanks to the third-order terms. For higher order modes, the domains of validity are noticeably reduced. Moreover, perturbative methods are inefficient for modes with frequencies lower than the Coriolis frequency 2Omega. We interpret this failure as a consequence of a modification in the shape of the resonant cavity that is not taken into account in the perturbative approach.

astro-ph.SR↗

Determining global parameters of the oscillations of solar-like stars

Helioseismology has enabled us to better understand the solar interior, while also allowing us to better constrain solar models. But now is a tremendous epoch for asteroseismology as space missions dedicated to studying stellar oscillations have been launched within the last years (MOST and CoRoT). CoRoT has already proved valuable results for many types of stars, while Kepler, which was launched in March 2009, will provide us with a huge number of seismic data very soon. This is an opportunity to better constrain stellar models and to finally understand stellar structure and evolution. The goal of this research work is to estimate the global parameters of any solar-like oscillating target in an automatic manner. We want to determine the global parameters of the acoustic modes (large separation, range of excited pressure modes, maximum amplitude, and its corresponding frequency), retrieve the surface rotation period of the star and use these results to estimate the global parameters of the star (radius and mass).To prepare the analysis of hundreds of solar-like oscillating stars, we have developed a robust and automatic pipeline. The pipeline consists of data analysis techniques, such as Fast Fourier Transform, wavelets, autocorrelation, as well as the application of minimisation algorithms for stellar-modelling. We apply our pipeline to some simulated lightcurves from the asteroFLAG team and the Aarhus-asteroFLAG simulator, and obtain results that are consistent with the input data to the simulations. Our strategy gives correct results for stars with magnitudes below 11 with only a few 10% of bad determinations among the reliable results. We then apply the pipeline to the Sun and three CoRoT targets.In particular we determine the parameters of the Sun, HD49933, HD181906, and HD181420.

astro-ph.SR↗

Enhancing the signal-to-noise ratio of solar-like targets

The analysis of the first solar-like targets done by CoRoT has shown that the oscillation amplitudes are about 25% below the theoretical amplitudes while the convective backgrounds are up to three times higher than in the solar case (Michel et al. 2008). In such conditions, the comb-like structure of the acoustic modes has smaller signal-to-noise ratios than initially expected complicating the characterization of individual modes. In the present work we apply the curvelet filtering to the solar-like targets already observed by CoRoT as well as a partial reconstruction of the signal from the obtained spacing of the comb-like structure of the acoustic modes. It enables us to enhance the signal-to-noise ratio of the ridges in the Echelle diagrams. Finally, we study how the analysis of the p modes can be improved.

astro-ph.SR↗

Inpainting: A powerful interpolation technique for helio- and asteroseismic data

In Helio- and asteroseismology, it is important to have continuous, uninterrupted, data sets. However, seismic observations usually contain gaps and we need to take them into account. In particular, if the gaps are not randomly distributed, they will produce a peak and a series of harmonics in the periodogram that will destroy the stellar information. An interpolation of the data can be good solution for this problem. In this paper we have studied an interpolation method based on the so-called 'inpainting' algorithms. To check the algorithm, we used both VIRGO and CoRoT satellite data to which we applied a realistic artificial window of a real CoRoT observing run to introduce gaps. Next we compared the results with the original, non-windowed data. Therefore, we were able to optimize the algorithm by minimizing the difference between the power spectrum density of the data with gaps and the complete time series. In general, we find that the power spectrum of the inpainted time series is very similar to the original, unperturbed one. Seismic inferences obtained after interpolating the data are the same as in the original case.

astro-ph.SR↗

The solar-like CoRoT target HD 170987: spectroscopic and seismic observations

The CoRoT mission is in its third year of observation and the data from the second long run in the galactic centre direction are being analysed. The solar-like oscillating stars that have been observed up to now have given some interesting results, specially concerning the amplitudes that are lower than predicted. We present here the results from the analysis of the star HD 170987.The goal of this research work is to characterise the global parameters of HD 170987. We look for global seismic parameters such as the mean large separation, maximum amplitude of the modes, and surface rotation because the signal-to-noise ratio in the observations do not allow us to measure individual modes. We also want to retrieve the stellar parameters of the star and its chemical composition.We have studied the chemical composition of the star using ground-based observations performed with the NARVAL spectrograph. We have used several methods to calculate the global parameters from the acoustic oscillations based on CoRoT data. The light curve of the star has been interpolated using inpainting algorithms to reduce the effect of data gaps. We find power excess related to p modes in the range [400 - 1200]muHz with a mean large separation of 55.2+-0.8muHz with a probability above 95% that increases to 55.9 +-0.2muHz in a higher frequency range [500 - 1250] muHz and a rejection level of 1%. A hint of the variation of this quantity with frequency is also found. The rotation period of the star is estimated to be around 4.3 days with an inclination axis of i=50 deg +20/-13. We measure a bolometric amplitude per radial mode in a range [2.4 - 2.9] ppm around 1000 muHz. Finally, using a grid of models, we estimate the stellar mass, M=1.43+-0.05 Msun, the radius, R=1.96+-0.046 Rsun, and the age ~2.4 Gyr.

astro-ph.SR↗

An automatic pipeline analysing solar-like oscillating targets tested on CoRoT and simulated data

The launch of the Kepler mission on 7th March 2009 opened a new bright future for the search of extra-solar planets while a huge amount of stars will be observed leading to the opportunity to better understand stellar evolution. This will allow us to probe different regions in the HR diagram and put more constraints on the stellar models. Up to now the asteroseismic missions such as MOST and CoRoT were providing some solar-like stars at a very slow cadence. But to study the several hundreds of solar-like oscillating stars that will be observed during the Kepler survey phase, an analysis devoted to one star is impossible if we want to have as much information as we can in a small period of time. We describe here our pipeline, A2Z, which calculates the global parameters of the stars (rotation period, mean large spacing of the acoustic modes, maximum amplitude of the modes), fits the modes globally, and estimates the radius and mass of the stars. This pipeline has been tested on simulated stars and applied to real data from CoRoT.

astro-ph.SR↗

Convective core size determination using asteroseismic data

As it is long known, the presence of a convective region creates a discontinuity in the chemical profile of a star, which in turn translates into a sharp variation of the adiabatic sound speed. This variation produces an oscillatory behavior of the pulsation frequencies, to which low degree p-modes are sensitive. We investigate the possibility of detecting the signature related to the presence of a convective core in the frequency spectrum of low-mass stars by means of suitable frequency combinations (such as separations and ratios)

astro-ph.SR↗

Solar-like oscillations in low-luminosity red giants: first results from Kepler

We have measured solar-like oscillations in red giants using time-series photometry from the first 34 days of science operations of the Kepler Mission. The light curves, obtained with 30-minute sampling, reveal clear oscillations in a large sample of G and K giants, extending in luminosity from the red clump down to the bottom of the giant branch. We confirm a strong correlation between the large separation of the oscillations (Delta nu) and the frequency of maximum power (nu_max). We focus on a sample of 50 low-luminosity stars (nu_max > 100 muHz, L <~ 30 L_sun) having high signal-to-noise ratios and showing the unambiguous signature of solar-like oscillations. These are H-shell-burning stars, whose oscillations should be valuable for testing models of stellar evolution and for constraining the star-formation rate in the local disk. We use a new technique to compare stars on a single echelle diagram by scaling their frequencies and find well-defined ridges corresponding to radial and non-radial oscillations, including clear evidence for modes with angular degree l=3. Measuring the small separation between l=0 and l=2 allows us to plot the so-called C-D diagram of delta nu_02 versus Delta nu. The small separation delta nu_01 of l=1 from the midpoint of adjacent l=0 modes is negative, contrary to the Sun and solar-type stars. The ridge for l=1 is notably broadened, which we attribute to mixed modes, confirming theoretical predictions for low-luminosity giants. Overall, the results demonstrate the tremendous potential of Kepler data for asteroseismology of red giants.

astro-ph.SR↗

The asteroseismic potential of Kepler: first results for solar-type stars

We present preliminary asteroseismic results from Kepler on three G-type stars. The observations, made at one-minute cadence during the first 33.5d of science operations, reveal high signal-to-noise solar-like oscillation spectra in all three stars: About 20 modes of oscillation may be clearly distinguished in each star. We discuss the appearance of the oscillation spectra, use the frequencies and frequency separations to provide first results on the radii, masses and ages of the stars, and comment in the light of these results on prospects for inference on other solar-type stars that Kepler will observe.

astro-ph.SR↗

Semiconvective Mixing in Low-Mass Stars

Mixing processes such as convection, overshooting and rotational mixing have long been known to affect the evolutionary properties of low-mass stars. While modeling a 1.2 Msun star, we encountered a semiconvective region outside the fully convective core, reminiscent of the well-known situation for massive stars. In this study we focus on low-mass stars presenting convective cores and, by applying different prescriptions for the determination of the convective boundaries and using different mixing descriptions for the dynamical processes in the core, we look for the effects of semiconvective mixing in the interior structure of the stars and its observable quantities. With this purpose, we have constructed different sets of evolutionary models using a stellar evolution code (GARSTEC), and analyzed the models looking for imprints of these processes.

astro-ph.SR↗

Gravity modes in rapidly rotating polytropic stars

Using the Two-dimensional Oscillation Program (TOP), we have explored the effects of rapid rotation on gravity modes in polytropic stars. Coriolis force, centrifugal distortion as well as compressible effects have been taken into account. Thanks to our complete calculation, we have first studied the validity domain of perturbative methods and started to explore properties of these modes. We focus on l=1 in this analysis.

astro-ph.SR↗

Detecting individual gravity modes in the Sun

Many questions are still open regarding the structure and the dynamics of the solar core. By constraining more this region in the solar evolution models, we can reduce the incertitudes on some physical processes and on momentum transport mechanisms. A first big step was made with the detection of the signature of the dipole-gravity modes in the Sun, giving a hint of a faster rotation rate inside the core. A deeper analysis of the GOLF/SoHO data unveils the presence of a pattern of peaks that could be interpreted as dipole gravity modes. In that case, those modes can be characterized, thus bringing better constraints on the rotation of the core as well as some structural parameters such as the density at these very deep layers of the Sun interior.

astro-ph.SR↗

Detecting individual gravity modes in the Sun: Chimera or reality?

Over the past 15 years, our knowledge of the interior of the Sun has tremendously progressed by the use of helioseismic measurements. However, to go further in our understanding of the solar core, we need to measure gravity (g) modes. Thanks to the high quality of the Doppler-velocity signal measured by GOLF/SoHO, it has been possible to unveil the signature of the asymptotic properties of the solar g modes, thus obtaining a hint of the rotation rate in the core. However, the quest for the detection of individual g modes is not yet over. In this work, we apply the latest theoretical developments to guide our research using GOLF velocity time series. In contrary to what was thought till now, we are maybe starting to identify individual low-frequency g modes...

astro-ph.SR↗

A fresh look at the seismic spectrum of HD49933: analysis of 180 days of CoRoT photometry

Solar-like oscillations have now been observed in several stars, thanks to ground-based spectroscopic observations and space-borne photometry. CoRoT, which has been in orbit since December 2006, has observed the star HD49933 twice. The oscillation spectrum of this star has proven difficult to interpret. Thanks to a new timeseries provided by CoRoT, we aim to provide a robust description of the oscillations in HD49933, i.e., to identify the degrees of the observed modes, and to measure mode frequencies, widths, amplitudes and the average rotational splitting. Several methods were used to model the Fourier spectrum: Maximum Likelihood Estimators and Bayesian analysis using Markov Chain Monte-Carlo techniques. The different methods yield consistent result, and allow us to make a robust identification of the modes and to extract precise mode parameters. Only the rotational splitting remains difficult to estimate precisely, but is clearly relatively large (several microHz in size).

astro-ph.SR↗

The CoRoT target HD175726: an active star with weak solar-like oscillations

Context. The CoRoT short runs give us the opportunity to observe a large variety of late-type stars through their solar-like oscillations. We report observations of the star HD175726 that lasted for 27 days during the first short run of the mission. The time series reveals a high-activity signal and the power spectrum presents an excess due to solar-like oscillations with a low signal-to-noise ratio. Aims. Our aim is to identify the most efficient tools to extract as much information as possible from the power density spectrum. Methods. The most productive method appears to be the autocorrelation of the time series, calculated as the spectrum of the filtered spectrum. This method is efficient, very rapid computationally, and will be useful for the analysis of other targets, observed with CoRoT or with forthcoming missions such as Kepler and Plato. Results. The mean large separation has been measured to be 97.2+-0.5 microHz, slightly below the expected value determined from solar scaling laws.We also show strong evidence for variation of the large separation with frequency. The bolometric mode amplitude is only 1.7+-0.25 ppm for radial modes, which is 1.7 times less than expected. Due to the low signal-to-noise ratio, mode identification is not possible for the available data set of HD175726. Conclusions. This study shows the possibility of extracting a seismic signal despite a signal-to-noise ratio of only 0.37. The observation of such a target shows the efficiency of the CoRoT data, and the potential benefit of longer observing runs.

astro-ph.SR↗