arXiv subjects

J. Butler

Publications and source records attributed to J. Butler.

At least 19 recordsLinked to original sources

arXiv2026

Euclid Quick Data Release (Q1). The shape of cluster haloes revealed by intracluster light

Intracluster light (ICL) offers a luminous route for measuring the shapes and orientations of cluster haloes. We used Euclid Quick Data Release (Q1) images to quantify ICL shapes for 205 clusters at $0.1 \leq z \leq 0.8$ selected from the eROSITA All-Sky Survey and the Dark Energy Survey. We measured the ICL properties across five bands ($I_\mathrm{E}$, $Y_\mathrm{E}$, $J_\mathrm{E}$, $H_\mathrm{E}$ and the coadded $YJH_\mathrm{E}$), and find that the shape parameters are consistent across the filters, with the $H_\mathrm{E}$ band probing the profiles to the largest cluster-centric distances ($0.1R_{200\mathrm{c}}\sim100$ kpc). The ICL ellipticity ($e=1-b/a$) distribution peaks at 0.5, consistent with halo ellipticities inferred from strong and weak lensing studies, suggesting that the ICL traces the large-scale structure of the clusters. Cluster cores, dominated by brightest cluster galaxy (BCG) light, are round ($e\sim0.2$), while the ICL becomes progressively more elongated at large radii, reaching an ellipticity of $\sim0.5$ by $0.1R_{200\mathrm{c}}$. We find that the ICL is closely aligned with the BCG (87% lie within 30$^\circ$), but shows a weaker alignment with the satellite galaxy distribution (61% within 30$^\circ$). Robust position angles could be measured using the ICL for 63% of the sample, whereas position angles could be measured for only 30% of the sample using the satellite galaxies. Stacking clusters in redshift bins allows measurements of the ICL surface brightness to $0.6$-$0.8R_{200\mathrm{c}}$ and ellipticity beyond $0.3$-$0.4R_{200\mathrm{c}}$ (300-400 kpc), but we observed a plateau in the ICL ellipticity beyond $0.1R_{200\mathrm{c}}$. These results demonstrate the capability of Euclid to characterise the ICL morphology with high statistical precision, allowing new constraints on cluster halo structure and its evolution with redshift.

astro-ph.GA↗

arXiv2026

Euclid Quick Data Release (Q1). The metallicity of the intracluster light

Colour provides key information to constrain the stellar population of the intracluster light (ICL), the diffuse light within galaxy clusters. We derive radial colour profiles ($Y_\mathrm{E}-H_\mathrm{E}$, $J_\mathrm{E}-H_\mathrm{E}$, $I_\mathrm{E}-H_\mathrm{E}$) of the brightest central galaxy (BCG) and ICL for 168 galaxy clusters from the Dark Energy Survey redMaPPer catalogue within the redshift range $0.1 < z < 0.75$ and halo mass $M_{\rm 200m} > 10^{14.05}M_\odot/h$, within the Euclid Quick Data Release (Q1). By stacking the light profiles measured using elliptical annuli on the BCG and ICL images, we reliably measure the ICL colour out to approximately 300 kpc, over which we find a colour gradient, with the ICL becoming bluer than the BCG out to approximately 150 kpc. Using stellar population synthesis (SPS) models, we find that near-infrared (NIR) colours are sensitive to metallicity, but not age. Thus, we measure a metallicity profile in the BCG and ICL that extends out to 300 kpc for a statistical sample for the first time. While the colours, and the detection of a colour and metallicity gradient, are robust, we note that our metallicity measurement is dependent upon our choice of both SPS model and colour. We find that the metallicity of the BCG is super-solar [$\log_{10} (Z/Z_\odot) > 0.1$], while the ICL is metal-poor [$\log_{10}(Z/Z_\odot)\approx -0.5$], placing the first statistical constraint on the metallicity of the ICL out to large radii. These results support our current understanding of BCG and ICL formation: BCGs form predominantly through mergers with massive galaxies or the cores of satellite galaxies, while the ICL grows via the tidal stripping of lower-metallicity stars from the outskirts of massive satellite galaxies.

astro-ph.GA↗

arXiv2025

Intracluster light is a biased tracer of the dark matter distribution in clusters

The diffuse stellar component of galaxy clusters known as intracluster light (ICL) has been proposed as an observable tracer of the cluster's dark matter (DM) halo. Assessing its reliability as a DM tracer requires understanding how the intracluster stars are energetically linked to the underlying DM distribution, which we investigate at $z\approx0$ in 12 galaxy clusters with $M_{178} = 1.18 - 3.71 \times 10^{14}\,\textrm{M}_\odot$ from the Horizon-AGN simulation. We quantify the orbital energies of these components by their mean specific energies ${\langle \varepsilon \rangle}$, and find that this quantity is $\approx$ 25 per cent lower for the intracluster stars than the DM, whilst the energetics of the satellite galaxies (a standard DM tracer) are only marginally ($\approx$ 5 per cent) higher than the DM. Importantly, the lower ${\langle \varepsilon \rangle}$ of the intracluster stars compared to the DM is robust against the precise separation between the brightest cluster galaxy (BCG) and the ICL. The specific energy distribution of ICL stars is concentrated towards lower energies and poorly samples the higher energies, where much of the DM resides. Consequently, the intracluster stars have velocity distributions with lower typical speeds and a more centrally-concentrated density profile than the DM. We also find that intracluster stars have more radially-biased orbits than the DM, indicating these components have distinct orbital distributions. This study demonstrates that although the morphology of the ICL may match the DM halo, the ICL is a biased tracer of DM, and these biases must be understood in order to infer properties of the DM from the ICL.

astro-ph.GA↗

arXiv2025

United States Muon Collider Community White Paper for the European Strategy for Particle Physics Update

This document is being submitted to the 2024-2026 European Strategy for Particle Physics Update (ESPPU) process on behalf of the US Muon Collider community, with its preparation coordinated by the interim US Muon Collider Coordination Group. The US Muon Collider Community comprises a few hundred American scientists. The purpose of the document is to inform ESPPU about the US plans for Muon Collider research and development (R&D), explain how these efforts align with the broader international R&D initiatives, and present the US community vision for the future realization of this transformative project.

hep-ex↗

arXiv2024

The EMC Effect of Tritium and Helium-3 from the JLab MARATHON Experiment

Measurements of the EMC effect in the tritium and helium-3 mirror nuclei are reported. The data were obtained by the MARATHON Jefferson Lab experiment, which performed deep inelastic electron scattering from deuterium and the three-body nuclei, using a cryogenic gas target system and the High Resolution Spectrometers of the Hall A Facility of the Lab. The data cover the Bjorken $x$ range from 0.20 to 0.83, corresponding to a squared four-momentum transfer $Q^2$ range from 2.7 to $11.9\gevsq$, and to an invariant mass $W$ of the final hadronic state greater than 1.84 GeV/${\it c}^2$. The tritium EMC effect measurement is the first of its kind. The MARATHON experimental results are compared to results from previous measurements by DESY-HERMES and JLab-Hall C experiments, as well as with few-body theoretical predictions.

nucl-ex↗

arXiv2022

Future Collider Options for the US

The United States has a rich history in high energy particle accelerators and colliders -- both lepton and hadron machines, which have enabled several major discoveries in elementary particle physics. To ensure continued progress in the field, U.S. leadership as a key partner in building next generation collider facilities abroad is essential; also critically important is the exploring of options to host a future collider in the U.S. The "Snowmass" study and the subsequent Particle Physics Project Prioritization Panel (P5) process provide the timely opportunity to develop strategies for both. What we do now will shape the future of our field and whether the U.S. will remain a world leader in these areas. In this white paper, we briefly discuss the US engagement in proposed collider projects abroad and describe future collider options for the U.S. We also call for initiating an integrated R\&D program for future colliders.

hep-ex↗

arXiv2021

Measurement of the Nucleon $F^n_2/F^p_2$ Structure Function Ratio by the Jefferson Lab MARATHON Tritium/Helium-3 Deep Inelastic Scattering Experiment

The ratio of the nucleon $F_2$ structure functions, $F_2^n/F_2^p$, is determined by the MARATHON experiment from measurements of deep inelastic scattering of electrons from $^3$H and $^3$He nuclei. The experiment was performed in the Hall A Facility of Jefferson Lab and used two high resolution spectrometers for electron detection, and a cryogenic target system which included a low-activity tritium cell. The data analysis used a novel technique exploiting the mirror symmetry of the two nuclei, which essentially eliminates many theoretical uncertainties in the extraction of the ratio. The results, which cover the Bjorken scaling variable range $0.19 < x < 0.83$, represent a significant improvement compared to previous SLAC and Jefferson Lab measurements for the ratio. They are compared to recent theoretical calculations and empirical determinations of the $F_2^n/F_2^p$ ratio.

hep-ex↗

arXiv2019

The Apollo ATCA Platform

We have developed a novel and generic open-source platform - Apollo - which simplifies the design of custom Advanced Telecommunications Computing Architecture (ATCA) blades by factoring the design into generic infrastructure and application-specific parts. The Apollo "Service Module" provides the required ATCA Intelligent Platform Management Controller, power entry and conditioning, a powerful system-on-module (SoM) computer, and flexible clock and communications infrastructure. The Apollo "Command Module" is customized for each application and typically includes two large field-programmable gate arrays, several hundred optical fiber interfaces operating at speeds up to 28 Gbps, memories, and other supporting infrastructure. The command and service module boards can be operated together or independently on the bench without need for an ATCA shelf.

physics.ins-det↗

arXiv2016

Design, Construction and Testing of the Digital Hadron Calorimeter (DHCAL) Electronics

A novel hadron calorimeter is being developed for future lepton colliding beam detectors. The calorimeter is optimized for the application of Particle Flow Algorithms (PFAs) to the measurement of hadronic jets and features a very finely segmented readout with 1 x 1 cm2 cells. The active media of the calorimeter are Resistive Plate Chambers (RPCs) with a digital, i.e. one-bit, readout. To first order the energy of incident particles in this calorimeter is reconstructed as being proportional to the number of pads with a signal over a given threshold. A large-scale prototype calorimeter with approximately 500,000 readout channels has been built and underwent extensive testing in the Fermilab and CERN test beams. This paper reports on the design, construction, and commissioning of the electronic readout system of this prototype calorimeter. The system is based on the DCAL front-end chip and a VME-based back-end.

physics.ins-det↗

arXiv2016

Design, Construction and Commissioning of the Digital Hadron Calorimeter - DHCAL

physics.ins-det↗

arXiv2014

Planning the Future of U.S. Particle Physics (Snowmass 2013): Chapter 2: Intensity Frontier

These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 2, on the Intensity Frontier, discusses the program of research with high-intensity beams and rare processes. This area includes experiments on neutrinos, proton decay, charged-lepton and quark weak interactions, atomic and nuclear probes of fundamental symmetries, and searches for new, light, weakly-interacting particles.

hep-ex↗

arXiv2009

Measurement of the Rate Capability of Resistive Plate Chambers

This paper reports on detailed measurements of the performance of Resistive Plate Chambers in a proton beam with variable intensity. Short term effects, such as dead time, are studied using consecutive events. On larger time scales, for various beam intensities the chamber.s efficiency is studied as a function of time within a spill of particles. The correlation between the efficiency of chambers placed in the same beam provides an indication of the lateral size of the observed effects. The measurements are compared to the predictions of a simple model based on the assumption that the resistive plates behave as pure resistors.

physics.ins-det↗

arXiv2008

Calibration of a digital hadron calorimeter with muons

The calibration procedure of a finely granulated digital hadron calorimeter with Resistive Plate Chambers as active elements is described. Results obtained with a stack of nine layers exposed to muons from the Fermilab test beam are presented.

physics.ins-det↗

arXiv2007

RHIC Low-Energy Challenges and Plans

There is significant interest in RHIC heavy ion collisions at $\sqrt{s_{NN}}=$5--50 GeV, motivated by a search for the QCD phase transition critical point. The lowest energies for this search are well below the nominal RHIC gold injection collision energy of $\sqrt{s_{NN}}=19.6$ GeV. There are several operations challenges at RHIC in this regime, including longitudinal acceptance, magnet field quality, lattice control, and luminosity monitoring. We report on the status of work to address these challenges, including results from beam tests of low energy RHIC operations with protons and gold, and potential improvements from different beam cooling scenarios.

physics.acc-ph↗

arXiv2005

Expected Accuracy in a Measurement of the CKM Angle $α$ Using a Dalitz Plot Analysis of $\boldmath B^0 \to ρπ$ Decays in the BTeV Project

A precise measurement of the angle $α$ in the CKM triangle is very important for a complete test of Standard Model. A theoretically clean method to extract $α$ is provided by B$^0 \to ρπ$ decays. Monte Carlo simulations to obtain the BTeV reconstruction efficiency and to estimate the signal to background ratio for these decays were performed. Finally the time-dependent Dalitz plot analysis, using the isospin amplitude formalism for tree and penguin contributions, was carried out. It was shown that in one year of data taking BTeV could achieve an accuracy on $α$ better than 5$^{\circ}$.

hep-ex↗

arXiv2005

Design and performance of LED calibration system prototype for the lead tungstate crystal calorimeter

A highly stable monitoring system based on blue and red light emitting diodes coupled to a distribution network comprised of optical fibers has been developed for an electromagnetic calorimeter that uses lead tungstate crystals readout with photomultiplier tubes. We report of the system prototype design and on the results of laboratory tests. Stability better than 0.1% (r.m.s.) has been achieved during one week of prototype operation.

physics.ins-det↗

arXiv2005

Correlation of Beam Electron and LED Signal Losses under Irradiation and Long-term Recovery of Lead Tungstate Crystals

Radiation damage in lead tungstate crystals reduces their transparency. The calibration that relates the amount of light detected in such crystals to incident energy of photons or electrons is of paramount importance to maintaining the energy resolution the detection system. We report on tests of lead tungstate crystals, read out by photomultiplier tubes, exposed to irradiation by monoenergetic electron or pion beams. The beam electrons themselves were used to measure the scintillation light output, and a blue light emitting diode (LED) was used to track variations of crystals transparency. We report on the correlation of the LED measurement with radiation damage by the beams and also show that it can accurately monitor the crystals recovery from such damage.

physics.ins-det↗

arXiv2004

Study of Possible Scintillation Mechanism Damage in PbWO4 Crystals After Pion Irradiation

We employed two independent methods to study possible damage to the scintillation mechanism in lead tungstate crystals due to irradiation by a 34 GeV pion beam. First, 10 crystals were irradiated simultaneously over 30 hours by a narrow beam, so that only a small region of each crystal was affected. We studied the effect of the irradiation on the light output non-uniformity. If a localized degradation was observed, it would indicate damage to the scintillation mechanism. Secondly, we detected light output using two phototubes attached to sides of a crystal. Since these phototubes detect scintillation light only from a small localized region, the effect of transmission loss should be minimal. We did not see any statistically significant evidence for scintillation mechanism damage with either method. The effect is consistent with zero, and the upper limit is 0.5% at 95% C.L.

physics.ins-det↗