SearcharxivSearch

arXiv subjects

J. C. Wang

Publications and source records attributed to J. C. Wang.

At least 19 recordsLinked to original sources

Crystal growth, structure and physical properties of quasi-one-dimensional tellurides Fe$_{4-x}$VTe$_{4-y}$ ($x=1.01$, $y=0.74$) and V$_{4.64}$Te$_4$

A new ternary compound Fe$_{4-x}$VTe$_{4-y}$ ($x=1.01$, $y=0.74$) with Ti5Te4-type structure is identified. Fe and V atoms tend to occupy different crystallographic positions and form quasi-one-dimensional (quasi-1D) Fe-V chains along the c-axis. Millimeter-sized single crystal of Fe$_{2.99}$VTe$_{3.26}$ (FVT) with slender-stick shape could be grown by chemical vapor transport method which reflects its quasi-1D crystal structure. Magnetization measurements reveal that FVT orders antiferromagnetically below T$_N$=93 K with strong easy ab-plane magnetic anisotropy. Although a weak glassy-like behavior appears below 10 K, FVT is dominant by long-range antiferromagnetic order in contrast to the spin-glass state in previously reported isostructural Fe$_{5}$Te$_{4}$. We also synthesize V$_{4.64}$Te$_4$ with similar quasi-1D V-chains and find it has weak anomalies at 144 K on both resistivity and susceptibility curves. However, no clear evidence is found for the development of magnetic or charge order. X-ray photoelectron spectroscopy and Curie-Weiss fit reveal that the effective moments for Fe$^{2+}$ and V$^{4+}$ in both compounds have large deviations from the conventional local moment model, which may possibly result from the formation of Fe/V metal-metal bondings. Furthermore the resistivity of both FVT and V$_{4.64}$Te$_4$ exhibits semiconducting-like temperature-dependent behavior but with average values close to typical bad metals, which resembles the transport behavior in the normal state of Fe-based superconductors. These quasi-1D compounds have shown interesting physical properties for future condensed matter physics research.

cond-mat.str-el

Simultaneous existence of the ocsillations, counterstreaming flows and mass injections in solar quiescent prominences

Solar prominences are very spectacular structures embedded in the tenuous and hot solar corona. The counterstreaming flows, a common feature in solar quiescent prominences, have been discovered for more than twenty years. However, the mechanism driving the counterstreaming flows is still elusive. To unveil the nature of this phenomenon, we analyzed the data of a quiescent prominence observed by the New Vacuum Solar Telescope (NVST), the Interface Region Imaging Spectrograph (IRIS), and the Solar Dynamical Observatory (SDO). It is found that there is a distinct longitudinal oscillation of prominence plasma along the higher part of the prominence spine in H$α$ observations. The oscillation period is approximately 83 minutes and the amplitude is about 32 Mm. The counterstreaming flows are dominant in the middle part of the prominence spine. The velocities of the counterstreaming flows range from about 4 km s$^{-1}$ to 11 km s$^{-1}$. Moreover, the intermittent mass flows with the upward plumes from the top of the bubbles and tornado-like barbs are observed to be injected into the lower part of the prominence spine from the lower atmosphere. The velocities of these injected mass flows range from about 3 km s$^{-1}$ to 30 km s$^{-1}$. Some injected mass flows exhibit redshifted Doppler signals, while others exhibit blueshifted signals. Based on these high resolution observations, it is found that different parts of the prominence spine exhibit the different dynamic characteristics. These results further advance the understanding of the ubiquitous counterstreaming flows in solar quiescent prominences.

astro-ph.SR

The hidden magnetic structures of a solar intermediate filament revealed by the injected flare material

Solar filaments are spectacular objects in the solar atmosphere, consisting of accumulations of cool, dense, and partially ionized plasma suspended in the hot solar corona against gravity. The magnetic structures that support the filament material remain elusive, partly due to the lack of high resolution magnetic field measurements in the chromosphere and corona. In this study, we reconstruct the magnetic structures of a solar intermediate filament using EUV observations and two different methods, to follow the injection of hot material from a B-class solar flare. Our analysis reveals the fine-scale magnetic structures of the filament, including a compact set of mutually wrapped magnetic fields encasing the cool filament material, two groups of helical magnetic structures intertwining with the main filament, and a series of arched magnetic loops positioned along the filament. Additionally, we also find that the northern footpoints of the helical structures are rooted in the same location, while their southern footpoints are rooted in different areas. The results obtained in this study offer new insights into the formation and eruption mechanisms of solar filaments.

astro-ph.SR

Measurement of the $^{159}$Tb(n, $γ$) cross section at the CSNS Back-n facility

The stellar (n, $γ$) cross section data for the mass numbers around A $\approx$ 160 are of key importance to nucleosynthesis in the main component of the slow neutron capture process, which occur in the thermally pulsing asymptotic giant branch (TP--AGB). The new measurement of (n, $γ$) cross sections for $^{159}$Tb was performed using the C$_6$D$_6$ detector system at the back streaming white neutron beam line (Back-n) of the China spallation neutron source (CSNS) with neutron energies ranging from 1 eV to 1 MeV. Experimental resonance capture kernels were reported up to 1.2 keV neutron energy with this capture measurement. Maxwellian-averaged cross sections (MACS) were derived from the measured $^{159}$Tb (n, $γ$) cross sections at $kT$ = 5 $\sim$ 100 keV and are in good agreement with the recommended data of KADoNiS-v0.3 and JEFF-3.3, while KADoNiS-v1.0 and ENDF-VIII.0 significantly overestimate the present MACS up to 40$\%$ and 20$\%$, respectively. A sensitive test of the s-process nucleosynthesis was also performed with the stellar evolution code MESA. Significant changes in abundances around A $\approx$ 160 were observed between the ENDF/B-VIII.0 and present measured rate of $^{159}$Tb(n, $γ$)$^{160}$Tb in the MESA simulation.

nucl-ex

Monte-Carlo simulations on possible collimation effects of outflows to fan-beamed emission of ultraluminous accreting X-ray pulsars

Pulsating ultraluminous X-ray sources (PULXs) are accreting pulsars with apparent X-ray luminosity exceeding $10^{39}\, \rm erg\ s^{-1}$. We perform Monte-Carlo simulations to investigate whether high collimation effect (or strong beaming effect) is dominant in the presence of accretion outflows, for the fan beam emission of the accretion column of the neutron stars in PULXs. We show that the three nearby PULXs (RX J0209.6$-$7427, Swift J0243.6+6124 and SMC X-3), namely the three musketeers here, have their main pulsed emission not strongly collimated even if strong outflows exist. This conclusion can be extended to the current sample of extragalactic PULXs, if accretion outflows are commonly produced from them. This means that the observed high luminosity of PULXs is indeed intrinsic, which can be used to infer the existence of very strong surface magnetic fields of $\sim10^{13-14}$ G, possibly multipole fields. However, if strong outflows are launched from the accretion disks in PULXs as a consequence of disk spherization by radiation pressure, regular dipole magnetic fields of $\sim10^{12}$ G may be required, comparable to that of the three musketeers, which have experienced large luminosity changes from well below their Eddington limit ($2\times10^{38}\, \rm erg\ s^{-1}$ for a NS) to super-Eddington and their maximum luminosity fills the luminosity gap between Galactic pulsars and extragalactic PULXs.

astro-ph.HE

Fan beamed X-ray emission from 1 keV to above 130 keV from the ultraluminous X-ray pulsar RX J0209.6-7427 in the Small Magellanic Cloud

We present detailed timing and spectral analyses of the transient X-ray pulsar RX J0209.6$-$7427 in the Small Magellanic Cloud during its 2019 giant outburst. With a better known distance than most galactic X-ray pulsars, its peak luminosity is determined to be $(1.11\pm0.06)\times 10^{39}\, \rm erg\ s^{-1}$; it is thus a {\it bonda fide} pulsating ultraluminous X-ray source (PULX). Owing to the broad energy band of \textit{Insight}-HXMT, its pulsed X-ray emission was detected from 1 keV up to the 130$-$180 keV band, which is the highest energy emission detected from any PULXs outside the Milky Way. This allows us to conclude that its main pulsed X-ray emission is from the "fan beam" of the accretion column, and its luminosity is thus intrinsic. We also estimate its magnetic field of (4.8$-$8.6)$\times10^{12}$ G or (1.7$-$2.2)$\times10^{13}$ G, from its spin evolution or transition in the accretion column structure during the outburst; we suggest that the two values of the magnetic field strength correspond to the dipole and multipole magnetic fields of the neutron star, similar to the recent discovery in the Galactic PULX Swift J0243.6+6124. Therefore, the nature of the neutron star and its ULX emission can be understood within the current theoretical frame of accreting neutron stars. This may have implications for understanding the nature of those farther away extragalactic PULXs.

astro-ph.HE

Dynamics evolution of a solar active-region filament from quasi-static state to eruption: rolling motion, untwisting motion, material transfer, and chirality

To better understand magnetic structure and eruptive process of solar filaments, a solar active-region filament (labeled F2) eruption associated with a B-class flare was investigated by using high-resolution H$α$ data from the 1 m New Vacuum Solar Telescope (NVST), combined with EUV observations of the Solar Dynamical Observatory (SDO). The filament F2 was disturbed by another filament (labeled F1) eruption that experienced a whip-like motion. Before the filament F2 eruption, the Dopplergrams show that the southern and the northern parts of the filament F2 body exhibit blueshift and redshift along the filament spine, simultaneously. It implies that the filament F2 was rolling from one side to the other. During the filament F2 eruption, the Doppler velocity shifts of the filament body are opposite to that before its eruption. It demonstrates that the filament body exhibits an untwisting motion, which can be also identified by tracing the movement of the eruptive filament threads. Moreover, it is found that the material of the filament F2 was transferred to the surrounding magnetic field loops, which is caused by magnetic reconnection between the filament F2 and the surrounding magnetic loops. According to the right-bearing threads of the filament F2 before its eruption, it can be deduced that the filament F2 is initially supported by a sheared arcade. The following observations reveal that the twisted magnetic structure of the filament F2 formed in the eruption phase.

astro-ph.SR

Giant pressure-enhancement of multiferroicity in CuBr2

Type-II multiferroic materials, in which ferroelectric polarization is induced by inversion non-symmetric magnetic order, promise new and highly efficient multifunctional applications based on the mutual control of magnetic and electric properties. Although this phenomenon has to date been limited to low temperatures, here we report a giant pressure-dependence of the multiferroic critical temperature in CuBr$_2$. At 4.5 GPa, $T_\mathrm{C}$ is enhanced from 73.5 to 162 K, to our knowledge the highest value yet reported for a non-oxide type-II multiferroic. This growth shows no sign of saturating and the dielectric loss remains small under these high pressures. We establish the structure under pressure and demonstrate a 60\% increase in the two-magnon Raman energy scale up to 3.6 GPa. First-principles structural and magnetic energy calculations provide a quantitative explanation in terms of dramatically pressure-enhanced interactions between CuBr$_2$ chains. These large, pressure-tuned magnetic interactions motivate structural control in cuprous halides as a route to applied high-temperature multiferroicity.

cond-mat.mtrl-sci

Triggering mechanism and material transfer of a failed solar filament eruption

Soar filament eruptions are often associated with solar flares and coronal mass ejections (CMEs), which are the major impacts on space weather. However, the fine structures and the trigger mechanisms of solar filaments are still unclear. To address these issues, we studied a failed solar active-region filament eruption associated with a C-class flare by using high-resolution H$α$ images from the New Vacuum Solar Telescope (NVST), supplemented by EUV observations of the Solar Dynamical Observatory (SDO). Before the filament eruption, a small bi-pole magnetic field emerged below the filament. And then magnetic reconnection between the filament and the emerging bi-pole magnetic field triggered the filament eruption. During the filament eruption, the untwisting motion of the filament can be clearly traced by the eruptive threads. Moreover, the foot-points of the eruptive threads are determined by tracing the descending filament materials. Note that the filament twisted structure and the right part of the eruptive filament threads cannot be seen before the filament eruption. These eruptive threads at the right part of the filament are found to be rooting in the weak negative polarities near the main negative sunspot. Moreover, a new filament formed in the filament channel due to material injection from the eruptive filament. The above observations and the potential field extrapolations are inclined to support that the filament materials were transferred into the overlying magnetic loops and the nearby filament channel by magnetic reconnection. These observations shed light on better understanding on the complexity of filament eruptions.

astro-ph.SR

Successive X-class flares and coronal mass ejections driven by shearing motion and sunspot rotation in active region NOAA 12673

We present a clear case study on the occurrence of two successive X-class flares including a decade-class flare (X9.3) and two coronal mass ejections (CMEs) triggered by shearing motion and sunspot rotation in active region NOAA 12673 on 2017 September 6. A shearing motion between the main sunspots with opposite polarities started on September 5 and even lasted after the second X-class flare on September 6. Moreover, the main sunspot with negative polarity rotated around its umbral center and another main sunspot with positive polarity also exhibited a slow rotation. The sunspot with negative polarity at the northwest of active region also began to rotate counter-clockwise before the onset of the first X-class flare. The successive formation and eruption of two S-shaped structures were closely related to the counter-clockwise rotation of three sunspots. It is also found that the rotation of sunspots is faster during four hours prior to the onset of the flares than the period before. The existence of a flux rope is found prior to the onset of two flares by using non-linear force free field extrapolation based on the vector magnetograms observed by SDO/HMI. These results suggest that shearing motion and sunspot rotation play an important role in the buildup of the free energy and the formation of flux ropes in the corona which produces solar flares and CMEs.

astro-ph.SR

Mermin-Wagner physics, (H,T) phase diagram, and candidate quantum spin-liquid phase in the spin-1/2 triangular-lattice antiferromagnet Ba8CoNb6O24

Ba$_8$CoNb$_6$O$_{24}$ presents a system whose Co$^{2+}$ ions have an effective spin 1/2 and construct a regular triangular-lattice antiferromagnet (TLAFM) with a very large interlayer spacing, ensuring purely two-dimensional character. We exploit this ideal realization to perform a detailed experimental analysis of the $S = 1/2$ TLAFM, which is one of the keystone models in frustrated quantum magnetism. We find strong low-energy spin fluctuations and no magnetic ordering, but a diverging correlation length down to 0.1 K, indicating a Mermin-Wagner trend towards zero-temperature order. Below 0.1 K, however, our low-field measurements show an nexpected magnetically disordered state, which is a candidate quantum spin liquid. We establish the $(H,T)$ phase diagram, mapping in detail the quantum fluctuation corrections to the available theoretical analysis. These include a strong upshift in field of the maximum ordering temperature, qualitative changes to both low- and high-field phase boundaries, and an ordered regime apparently dominated by the collinear "up-up-down" state. Ba$_8$CoNb$_6$O$_{24}$ therefore offers fresh input for the development of theoretical approaches to the field-induced quantum phase transitions of the $S = 1/2$ Heisenberg TLAFM.

cond-mat.str-el

Simultaneous observation of a flux rope eruption and magnetic reconnection during an X-class solar flare

In this letter, we present a spectacular eruptive flare (X8.2) associated with a coronal mass ejection (CME) on 2017 September 10 at the west limb of the Sun. A flux rope eruption is followed by the inflow, the formation of a current sheet and a cusp structure, which were simultaneously observed during the occurrence of this flare. The hierarchical layers of the cusp-shaped structure are well observed in 131 Å observation. The scenario that can be created from these observations is very consistent with the predictions of some eruptive models. Except for the characteristics mentioned above in the process of the flare predicted by classical eruption models, the current sheet separating into several small current sheets is also observed at the final stage of the flux rope eruption. The quantitative calculation of the velocities and accelerations of the inflow, hot cusp structure, and post-flare loops is presented. The width of the current sheet is estimated to be about 3 $\times$ $10^{3}$ km. These observations are very useful to understand the process of solar eruptions.

astro-ph.SR

An extended hybrid numerical simulation of isotropic compressible turbulence

This paper presents an extension of the hybrid scheme proposed by Wang et al. (J. Comput. Phys. 229 (2010) 169-180) for numerical simulation of compressible isotropic turbulence to flows with higher turbulent Mach numbers. The scheme still utilizes an 8th-order compact scheme with built-in hyperviscosity for smooth regions and a 7th-order WENO scheme for highly compressive regions, but now both in their conservation formulations and for the latter with the Roe type characteristic-wise reconstruction. To enhance the robustness of the WENO scheme without compromising its high-resolution and accuracy, the recursive-order-reduction procedure is adopted, where a new type of reconstruction-failure-detection criterion is constructed. To capture the upwind direction properly in extreme conditions, the global Lax-Friedrichs numerical flux is used. In addition, a new form of cooling function is proposed, which is proved to be positivity-preserving. With these techniques, the new scheme not only inherits the good properties of the original one but also extends largely the computable range of turbulent Mach number, which has been further confirmed by numerical results.

physics.comp-ph

The eruption of a small-scale emerging flux rope as the driver of an M-class flare and a coronal mass ejection

Solar flares and coronal mass ejections (CMEs) are the most powerful explosions in the Sun. They are major sources of potentially destructive space weather conditions. However, the possible causes of their initiation remain controversial. By using high resolution data observed by NST of BBSO, supplemented by Solar Dynamics Observatory (SDO) observations, we present unusual observations of a small-scale emerging flux rope near a large sunspot, whose eruption produced an M-class flare and a coronal mass ejection. The presence of the small-scale flux rope was indicated by static nonlinear force free field (NLFFF) extrapolation as well as data-driven MHD modeling of the dynamic evolution of the coronal 3D magnetic field. During the emergence of the flux rope, rotation of satellite sunspots at the footpoints of the flux rope was observed. Meanwhile, the Lorentz force, magnetic energy, vertical current, and transverse fields were increasing during this phase. The free energy from the magnetic flux emergence and twisting magnetic fields is sufficient to power the M-class flare. These observations for the first time present the complete process from the emergence of the small-scale flux rope to the production of solar eruptions.

astro-ph.SR

Discerning the $γ$-ray emitting region in the flat spectrum radio quasars

A model-dependent method is proposed to determine the location of the $γ$-ray emitting region for a given flat spectrum radio quasar (FSRQ). In the model, the extra-relativistic electrons are injected at the base of the jet and non-thermal photons are produced by both synchrotron radiation and inverse-Comtpon (IC) scattering in the energy dissipation region. The target photons dominating inverse-Comtpon scattering originate from both synchrotron photons and external ambient photon fields, and the energy density of external radiation field is a function of the distance between the position of dissipation region and a central super-massive black hole, and their spectra are seen in the comoving frame. Moreover, the energy dissipation region could be determined by the model parameter through reproducing the $γ$-ray spectra. Such a model is applied to reproduce the quasi-simultaneous multi-wavelength observed data for 36 FSRQs. In order to define the width of the broad-line region shell and dusty molecular torus shell, a simple numerical constraint is used to determine the outer boundary of the broad-line region and dusty molecular torus. Our results show that 1) the $γ$-ray emitting regions are located at the range from 0.1 pc to 10 pc; 2) the $γ$-ray emitting regions are located outside the broad-line regions and within the dusty molecular tori; and 3) the $γ$-ray emitting region are located closer to the dusty molecular torus ranges than the broad-line regions. Therefore, it may concluded that a direct evidence for the \emph{far site} scenario could be obtained on the basis of the model results.

astro-ph.HE

Studies of the decays D^0 \rightarrow K_S^0K^-π^+ and D^0 \rightarrow K_S^0K^+π^-

The first measurements of the coherence factor R_{K_S^0Kπ} and the average strong--phase difference δ^{K_S^0Kπ} in D^0 \to K_S^0 K^\mpπ^\pm decays are reported. These parameters can be used to improve the determination of the unitary triangle angle γ in B^- \rightarrow $\widetilde{D}K^-$ decays, where $\widetilde{D}$ is either a D^0 or a D^0-bar meson decaying to the same final state, and also in studies of charm mixing. The measurements of the coherence factor and strong-phase difference are made using quantum-correlated, fully-reconstructed D^0D^0-bar pairs produced in e^+e^- collisions at the ψ(3770) resonance. The measured values are R_{K_S^0Kπ} = 0.70 \pm 0.08 and δ^{K_S^0Kπ} = (0.1 \pm 15.7)$^\circ$ for an unrestricted kinematic region and R_{K*K} = 0.94 \pm 0.12 and δ^{K*K} = (-16.6 \pm 18.4)$^\circ$ for a region where the combined K_S^0 π^\pm invariant mass is within 100 MeV/c^2 of the K^{*}(892)^\pm mass. These results indicate a significant level of coherence in the decay. In addition, isobar models are presented for the two decays, which show the dominance of the K^*(892)^\pm resonance. The branching ratio {B}(D^0 \rightarrow K_S^0K^+π^-)/{B}(D^0 \rightarrow K_S^0K^-π^+) is determined to be 0.592 \pm 0.044 (stat.) \pm 0.018 (syst.), which is more precise than previous measurements.

hep-ex

The formation of an inverse S-shaped active-region filament driven by sunspot motion and magnetic reconnection

We present a detailed study of the formation of an inverse S-shaped filament prior to its eruption in active region NOAA 11884 from October 31 to November 2, 2013. In the initial stage, clockwise rotation of a small positive sunspot around the main negative trailing sunspot formed a curved filament. Then the small sunspot cancelled with negative magnetic flux to create a longer active-region filament with an inverse S-shape. At the cancellation site a brightening was observed in UV and EUV images and bright material was transferred to the filament. Later the filament erupted after cancellation of two opposite polarities under the upper part of the filament. Nonlinear force-free field (NLFFF) extrapolation of vector photospheric fields suggests that the filament may have a twisted structure, but this cannot be confirmed from the current observations.

astro-ph.SR

Model-independent determination of the strong-phase difference between D^0 and D^0-bar-> K^0_S,L h^+ h^- (h=pi,K) and its impact on the measurement of the CKM angle gamma/phi_3

We report the first determination of the relative strong-phase difference between D^0 -> K^0_S,L K^+ K^- and D^0-bar -> K^0_S,L K^+ K^-. In addition, we present updated measurements of the relative strong-phase difference between D^0 -> K^0_S,L pi^+ pi^- and D^0-bar -> K^0_S,L pi^+ pi^-. Both measurements exploit the quantum coherence between a pair of D^0 and D^0-bar mesons produced from psi(3770) decays. The strong-phase differences measured are important for determining the Cabibbo-Kobayashi-Maskawa angle gamma/phi_3 in B^- -> K^- D^0-tilde decays, where D^0-tilde is a D^0 or D^0-bar meson decaying to K^0_S h^+ h^- (h=pi,K), in a manner independent of the model assumed to describe the D^0 -> K^0_S h^+ h^- decay. Using our results, the uncertainty in gamma/phi_3 due to the error on the strong-phase difference is expected to be between 1.7 and 3.9 degrees for an analysis using B^- K^- D^0-tilde D^0-tilde -> K^0_S pi^+ pi^- decays, and between 3.2 and 3.9 degrees for an analysis based on B^- -> K^- D^0-tilde, D^0-tilde -> K^0_S K^+ K^- decays. A measurement is also presented of the CP-odd fraction, F_-, of the decay D^0 -> K^0_S K^+ K^- in the region of the phi -> K^+ K^- resonance. We find that in a region within 0.01 GeV^2/c^4 of the nominal phi mass squared F_- > 0.91 at the 90% confidence level.

hep-ex