SearcharxivSearch

arXiv subjects

J. Chauveau

Publications and source records attributed to J. Chauveau.

16 recordsLinked to original sources

Sensitivity of the SHiP experiment to dark photons decaying to a pair of charged particles

Dark photons are hypothetical massive vector particles that could mix with ordinary photons. The simplest theoretical model is fully characterised by only two parameters: the mass of the dark photon m$_{γ^{\mathrm{D}}}$ and its mixing parameter with the photon, $\varepsilon$. The sensitivity of the SHiP detector is reviewed for dark photons in the mass range between 0.002 and 10 GeV. Different production mechanisms are simulated, with the dark photons decaying to pairs of visible fermions, including both leptons and quarks. Exclusion contours are presented and compared with those of past experiments. The SHiP detector is expected to have a unique sensitivity for m$_{γ^{\mathrm{D}}}$ ranging between 0.8 and 3.3$^{+0.2}_{-0.5}$ GeV, and $\varepsilon^2$ ranging between $10^{-11}$ and $10^{-17}$.

hep-ex

SND@LHC

We propose to build and operate a detector that, for the first time, will measure the process $pp\toνX$ at the LHC and search for feebly interacting particles (FIPs) in an unexplored domain. The TI18 tunnel has been identified as a suitable site to perform these measurements due to very low machine-induced background. The detector will be off-axis with respect to the ATLAS interaction point (IP1) and, given the pseudo-rapidity range accessible, the corresponding neutrinos will mostly come from charm decays: the proposed experiment will thus make the first test of the heavy flavour production in a pseudo-rapidity range that is not accessible by the current LHC detectors. In order to efficiently reconstruct neutrino interactions and identify their flavour, the detector will combine in the target region nuclear emulsion technology with scintillating fibre tracking layers and it will adopt a muon identification system based on scintillating bars that will also play the role of a hadronic calorimeter. The time of flight measurement will be achieved thanks to a dedicated timing detector. The detector will be a small-scale prototype of the scattering and neutrino detector (SND) of the SHiP experiment: the operation of this detector will provide an important test of the neutrino reconstruction in a high occupancy environment.

physics.ins-det

LPNHE scientific perspectives for the European Strategy for Particle Physics

This note summarizes the activities and the scientific and technical perspectives of the Laboratoire de Physique Nucleaire et de Hautes Energies (LPNHE) at Sorbonne University, Paris. Although the ESPP is specifically aimed at particle physics, we discuss in this note in parallel the three scientific lines developed at LPNHE (Particle Physics, Astroparticles, Cosmology), first with the current scientific activities, then for the future activities. However, our conclusions and recommendations are focused on the particle physics strategy.

hep-ph

Production and Integration of the ATLAS Insertable B-Layer

During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and integrated luminosities realised following the shutdown. Because of the extreme radiation and collision rate environment, several new radiation-tolerant sensor and electronic technologies were utilised for this layer. This paper reports on the IBL construction and integration prior to its operation in the ATLAS detector.

physics.ins-det

Measurement of $\cos{2β}$ in $B^{0} \to D^{(*)} h^{0}$ with $D \to K_{S}^{0} π^{+} π^{-}$ decays by a combined time-dependent Dalitz plot analysis of BaBar and Belle data

We report measurements of $\sin{2β}$ and $\cos{2β}$ from a time-dependent Dalitz plot analysis of $B^{0} \to D^{(*)} h^{0}$ with $D \to K_{S}^{0} π^{+} π^{-}$ decays, where the light unflavored and neutral hadron $h^{0}$ is a $π^{0}$, $η$, or $ω$ meson. The analysis is performed with a combination of the final data sets of the \babar\ and Belle experiments containing $471 \times 10^{6}$ and $772 \times 10^{6}$ $B\bar{B}$ pairs collected at the $Υ\left(4S\right)$ resonance at the asymmetric-energy B factories PEP-II at SLAC and KEKB at KEK, respectively. We measure $\sin{2β} = 0.80 \pm 0.14 \,(\rm{stat.}) \pm 0.06 \,(\rm{syst.}) \pm 0.03 \,(\rm{model})$ and $\cos{2β} = 0.91 \pm 0.22 \,(\rm{stat.}) \pm 0.09 \,(\rm{syst.}) \pm 0.07 \,(\rm{model})$. The result for the direct measurement of the angle is $β= \left( 22.5 \pm 4.4 \,(\rm{stat.}) \pm 1.2 \,(\rm{syst.}) \pm 0.6 \,(\rm{model}) \right)^{\circ}$. The last quoted uncertainties are due to the composition of the $D^{0} \to K_{S}^{0} π^{+} π^{-}$ decay amplitude model, which is newly established by a Dalitz plot amplitude analysis of a high-statistics $e^{+}e^{-} \to c\bar{c}$ data sample as part of this analysis. We find the first evidence for $\cos2β>0$ at the level of $3.7$ standard deviations. The measurement excludes the trigonometric multifold solution $π/2 - β= (68.1 \pm 0.7)^{\circ}$ at the level of $7.3$ standard deviations and therefore resolves an ambiguity in the determination of the apex of the CKM Unitarity Triangle. The hypothesis of $β= 0^{\circ}$ is ruled out at the level of $5.1$ standard deviations, and thus CP violation is observed in $B^{0} \to D^{(*)} h^{0}$ decays.

hep-ex

First evidence for $\cos 2β>0$ and resolution of the CKM Unitarity Triangle ambiguity by a time-dependent Dalitz plot analysis of $B^{0} \to D^{(*)} h^{0}$ with $D \to K_{S}^{0} π^{+} π^{-}$ decays

We present first evidence that the cosine of the CP-violating weak phase $2β$ is positive, and hence exclude trigonometric multifold solutions of the CKM Unitarity Triangle using a time-dependent Dalitz plot analysis of $B^{0} \to D^{(*)} h^{0}$ with $D \to K_{S}^{0} π^{+} π^{-}$ decays, where $h^{0} \in \{π^{0}, η, ω\}$ denotes a light unflavored and neutral hadron. The measurement is performed combining the final data sets of the BaBar and Belle experiments collected at the $Υ(4S)$ resonance at the asymmetric-energy B factories PEP-II at SLAC and KEKB at KEK, respectively. The data samples contain $( 471 \pm 3 )\times 10^6\, B\bar{B}$ pairs recorded by the BaBar detector and $( 772 \pm 11 )\times 10^6\, B\bar{B}$ pairs recorded by the Belle detector. The results of the measurement are $\sin{2β} = 0.80 \pm 0.14 \,(\rm{stat.}) \pm 0.06 \,(\rm{syst.}) \pm 0.03 \,(\rm{model})$ and $\cos{2β} = 0.91 \pm 0.22 \,(\rm{stat.}) \pm 0.09 \,(\rm{syst.}) \pm 0.07 \,(\rm{model})$. The result for the direct measurement of the angle $β$ of the CKM Unitarity Triangle is $β= \left( 22.5 \pm 4.4 \,(\rm{stat.}) \pm 1.2 \,(\rm{syst.}) \pm 0.6 \,(\rm{model}) \right)^{\circ}$. The quoted model uncertainties are due to the composition of the $D^{0} \to K_{S}^{0} π^{+} π^{-}$ decay amplitude model, which is newly established by performing a Dalitz plot amplitude analysis using a high-statistics $e^{+}e^{-} \to c\bar{c}$ data sample. CP violation is observed in $B^{0} \to D^{(*)} h^{0}$ decays at the level of $5.1$ standard deviations. The significance for $\cos{2β}>0$ is $3.7$ standard deviations. The trigonometric multifold solution $π/2 - β= (68.1 \pm 0.7)^{\circ}$ is excluded at the level of $7.3$ standard deviations. The measurement resolves an ambiguity in the determination of the apex of the CKM Unitarity Triangle.

hep-ex

The active muon shield in the SHiP experiment

The SHiP experiment is designed to search for very weakly interacting particles beyond the Standard Model which are produced in a 400 GeV/c proton beam dump at the CERN SPS. An essential task for the experiment is to keep the Standard Model background level to less than 0.1 event after $2\times 10^{20}$ protons on target. In the beam dump, around $10^{11}$ muons will be produced per second. The muon rate in the spectrometer has to be reduced by at least four orders of magnitude to avoid muon-induced combinatorial background. A novel active muon shield is used to magnetically deflect the muons out of the acceptance of the spectrometer. This paper describes the basic principle of such a shield, its optimization and its performance.

physics.ins-det

The Physics of the B Factories

This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C. Please note that version 3 on the archive is the auxiliary version of the Physics of the B Factories book. This uses the notation alpha, beta, gamma for the angles of the Unitarity Triangle. The nominal version uses the notation phi_1, phi_2 and phi_3. Please cite this work as Eur. Phys. J. C74 (2014) 3026.

hep-ex

First Observation of CP Violation in B0->D(*)CP h0 Decays by a Combined Time-Dependent Analysis of BaBar and Belle Data

We report a measurement of the time-dependent CP asymmetry of B0->D(*)CP h0 decays, where the light neutral hadron h0 is a pi0, eta or omega meson, and the neutral D meson is reconstructed in the CP eigenstates K+ K-, K0S pi0 or K0S omega. The measurement is performed combining the final data samples collected at the Y(4S) resonance by the BaBar and Belle experiments at the asymmetric-energy B factories PEP-II at SLAC and KEKB at KEK, respectively. The data samples contain ( 471 +/- 3 ) x 10^6 BB pairs recorded by the BaBar detector and ( 772 +/- 11 ) x 10^6, BB pairs recorded by the Belle detector. We measure the CP asymmetry parameters -eta_f S = +0.66 +/- 0.10 (stat.) +/- 0.06 (syst.) and C = -0.02 +/- 0.07 (stat.) +/- 0.03 (syst.). These results correspond to the first observation of CP violation in B0->D(*)CP h0 decays. The hypothesis of no mixing-induced CP violation is excluded in these decays at the level of 5.4 standard deviations.

hep-ex

A facility to Search for Hidden Particles (SHiP) at the CERN SPS

A new general purpose fixed target facility is proposed at the CERN SPS accelerator which is aimed at exploring the domain of hidden particles and make measurements with tau neutrinos. Hidden particles are predicted by a large number of models beyond the Standard Model. The high intensity of the SPS 400~GeV beam allows probing a wide variety of models containing light long-lived exotic particles with masses below ${\cal O}$(10)~GeV/c$^2$, including very weakly interacting low-energy SUSY states. The experimental programme of the proposed facility is capable of being extended in the future, e.g. to include direct searches for Dark Matter and Lepton Flavour Violation.

physics.ins-det

Performance of Irradiated Thin Edgeless N-on-P Planar Pixel Sensors for ATLAS Upgrades

In view of the LHC upgrade phases towards the High Luminosity LHC (HL-LHC), the ATLAS experiment plans to upgrade the Inner Detector with an all-silicon system. Because of its radiation hardness and cost effectiveness, the n-on-p silicon technology is a promising candidate for a large area pixel detector. The paper reports on the joint development, by LPNHE and FBK of novel n-on-p edgeless planar pixel sensors, making use of the active trench concept for the reduction of the dead area at the periphery of the device. After discussing the sensor technology, a complete overview of the electrical characterization of several irradiated samples will be discussed. Some comments about detector modules being assembled will be made and eventually some plans will be outlined.

physics.ins-det

Electrical Characterization of a Thin Edgeless N-on-p Planar Pixel Sensors For ATLAS Upgrades

In view of the LHC upgrade phases towards the High Luminosity LHC (HL-LHC), the ATLAS experiment plans to upgrade the Inner Detector with an all-silicon system. Because of its radiation hardness and cost effectiveness, the n-on-p silicon technology is a promising candidate for a large area pixel detector. The paper reports on the joint development, by LPNHE and FBK of novel n-on-p edgeless planar pixel sensors, making use of the active trench concept for the reduction of the dead area at the periphery of the device. After discussing the sensor technology, and presenting some sensors' simulation results, a complete overview of the electrical characterization of the produced devices will be given.

physics.ins-det

Development of Edgeless Silicon Pixel Sensors on p-type substrate for the ATLAS High-Luminosity Upgrade

In view of the LHC upgrade for the High Luminosity Phase (HL-LHC), the ATLAS experiment is planning to replace the Inner Detector with an all-Silicon system. The n-in-p bulk technology represents a valid solution for the modules of most of the layers, given the significant radiation hardness of this option and the reduced cost. The large area necessary to instrument the outer layers will demand to tile the sensors, a solution for which the inefficient region at the border of each sensor needs to be reduced to the minimum size. This paper reports on a joint R&D project by the ATLAS LPNHE Paris group and FBK Trento on a novel n-in-p edgeless planar pixel design, based on the deep-trench process available at FTK.

physics.ins-det

Development of Edgeless n-on-p Planar Pixel Sensors for future ATLAS Upgrades

The development of n-on-p "edgeless" planar pixel sensors being fabricated at FBK (Trento, Italy), aimed at the upgrade of the ATLAS Inner Detector for the High Luminosity phase of the Large Hadron Collider (HL-LHC), is reported. A characterizing feature of the devices is the reduced dead area at the edge, achieved by adopting the "active edge" technology, based on a deep etched trench, suitably doped to make an ohmic contact to the substrate. The project is presented, along with the active edge process, the sensor design for this first n-on-p production and a selection of simulation results, including the expected charge collection efficiency after radiation fluence of $1 \times 10^{15} {\rm n_{eq}}/{\rm cm}^2$ comparable to those expected at HL-LHC (about ten years of running, with an integrated luminosity of 3000 fb$^{-1}$) for the outer pixel layers. We show that, after irradiation and at a bias voltage of 500 V, more than 50% of the signal should be collected in the edge region; this confirms the validity of the active edge approach.

physics.ins-det

Novel Silicon n-on-p Edgeless Planar Pixel Sensors for the ATLAS upgrade

In view of the LHC upgrade phases towards HL-LHC, the ATLAS experiment plans to upgrade the Inner Detector with an all-silicon system. The n-on-p silicon technology is a promising candidate for the pixel upgrade thanks to its radiation hardness and cost effectiveness, that allow for enlarging the area instrumented with pixel detectors. We report on the development of novel n-in-p edgeless planar pixel sensors fabricated at FBK (Trento, Italy), making use of the "active edge" concept for the reduction of the dead area at the periphery of the device. After discussing the sensor technology and fabrication process, we present device simulations (pre- and post-irradiation) performed for different sensor configurations. First preliminary results obtained with the test-structures of the production are shown.

physics.ins-det

A 16-channel Digital TDC Chip with internal buffering and selective readout for the DIRC Cherenkov counter of the BABAR experiment

A 16-channel digital TDC chip has been built for the DIRC Cherenkov counter of the BaBar experiment at the SLAC B-factory (Stanford, USA). The binning is 0.5 ns, the conversion time 32 ns and the full-scale 32 mus. The data driven architecture integrates channel buffering and selective readout of data falling within a programmable time window. The time measuring scale is constantly locked to the phase of the (external) clock. The linearity is better than 80 ps rms. The dead time loss is less than 0.1% for incoherent random input at a rate of 100 khz on each channel. At such a rate the power dissipation is less than 100 mw. The die size is 36 mm2.

hep-ex