SearcharxivSearch

arXiv subjects

J. Closier

Publications and source records attributed to J. Closier.

11 recordsLinked to original sources

Design and performance of the LHCb trigger and full real-time reconstruction in Run 2 of the LHC

The LHCb collaboration has redesigned its trigger to enable the full offline detector reconstruction to be performed in real time. Together with the real-time alignment and calibration of the detector, and a software infrastructure to make persistent the high-level physics objects produced during real-time processing, this redesign enabled the widespread deployment of real-time analysis during Run 2. We describe the design of the Run 2 trigger and real-time reconstruction, and present data-driven performance measurements for a representative sample of LHCb's physics programme.

hep-ex

The LHCb Trigger and its Performance in 2011

This paper presents the design of the LHCb trigger and its performance on data taken at the LHC in 2011. A principal goal of LHCb is to perform flavour physics measurements, and the trigger is designed to distinguish charm and beauty decays from the light quark background. Using a combination of lepton identification and measurements of the particles' transverse momenta the trigger selects particles originating from charm and beauty hadrons, which typically fly a finite distance before decaying. The trigger reduces the roughly 11\,MHz of bunch-bunch crossings that contain at least one inelastic $pp$ interaction to 3\,kHz. This reduction takes place in two stages; the first stage is implemented in hardware and the second stage is a software application that runs on a large computer farm. A data-driven method is used to evaluate the performance of the trigger on several charm and beauty decay modes.

hep-ex

Search for the rare decays Bs -->mumu and Bd -->mumu

A search for the decays Bs-->mumu and Bd-->mumu is performed with about 37 pb^{-1} of pp collisions at sqrt{s} = 7 TeV collected by the LHCb experiment at the Large Hadron Collider at CERN. The observed numbers of events are consistent with the background expectations. The resulting upper limits on the branching ratios are BR(Bs-->mumu) < 5.6 x 10^{-8} and BR(Bd-->mumu) <1.5 x 10^{-8} at 95% confidence level.

hep-ex

Determination of f_s/f_d for 7 TeV pp collisions and a measurement of the branching fraction of the decay Bd->D-K+

The relative abundance of the three decay modes $B_d \to D^- K^+$, $B_d \to D^- π^+$ and $B_s \to D_s^- π^+$ produced in 7 TeV $pp$ collisions at the LHC is determined from data corresponding to an integrated luminosity of 35 pb$^{-1}$. The branching fraction of $B_d \to D^- K^+$ is found to be $\cal B (B_d \to D^- K^+) = (2.01 \pm 0.18^{\textrm{stat}} \pm 0.14^{\textrm{syst}})\times 10^{-4}$. The ratio of fragmentation fractions \fsfdt is determined through the relative abundance of $B_s \to D_s^- π^+$ to $B_d \to D^- K^+$ and $B_d \to D^-π^+$, leading to $f_s/f_d = 0.253 \pm 0.017 \pm 0.017 \pm 0.020$, where the uncertainties are statistical, systematic, and theoretical respectively.

hep-ex

Measurement of the inclusive phi cross-section in pp collisions at sqrt(s) = 7 TeV

The cross-section for inclusive phi meson production in pp collisions at a centre-of-mass energy of sqrt(s) = 7 TeV has been measured with the LHCb detector at the Large Hadron Collider. The differential cross-section is measured as a function of the phi transverse momentum p_T and rapidity y in the region 0.6 < p_T < 5.0 GeV/c and 2.44 < y < 4.06. The cross-section for inclusive phi production in this kinematic range is sigma(pp -> phi X) = 1758 pm 19(stat) ^{+43}_{-14}(syst) pm 182(scale) microbarn, where the first systematic uncertainty depends on the p_T and y region and the second is related to the overall scale. Predictions based on the Pythia 6.4 generator underestimate the cross-section.

hep-ex

Measurement of $V^0$ production ratios in $pp$ collisions at $\sqrt{s} = 0.9$ and 7\,TeV

The $\barΛ / Λ$ and $\barΛ / K^0_\mathrm{S}$ production ratios are measured by the LHCb detector from $0.3\,\mathrm{nb}^{-1}$ of $pp$ collisions delivered by the LHC at $\sqrt{s} = 0.9$\,TeV and $1.8\,\mathrm{nb}^{-1}$ at $\sqrt{s} = 7$\,TeV. Both ratios are presented as a function of transverse momentum, $p_\mathrm{T}$, and rapidity, $y$, in the ranges {$0.15 < p_\mathrm{T} < 2.50\,\mathrm{GeV}/c$} and {$2.0<y<4.5$}. Results at the two energies are in good agreement as a function of rapidity loss, $Δy = y_\mathrm{beam} - y$, and are consistent with previous measurements. The ratio $\barΛ / Λ$, measuring the transport of baryon number from the collision into the detector, is smaller in data than predicted in simulation, particularly at high rapidity. The ratio $\barΛ / K^0_\mathrm{S}$, measuring the baryon-to-meson suppression in strange quark hadronisation, is significantly larger than expected.

hep-ex

Measurement of J/psi production in pp collisions at sqrt(s)=7 TeV

The production of J/psi mesons in proton-proton collisions at sqrt(s)=7 TeV is studied with the LHCb detector at the LHC. The differential cross-section for prompt J/psi production is measured as a function of the J/psi transverse momentum pT and rapidity y in the fiducial region 0<pT<14 GeV/c and 2.0<y<4.5. The differential cross-section and fraction of J/psi from b-hadron decays are also measured in the same pT and y ranges. The analysis is based on a data sample corresponding to an integrated luminosity of 5.2pb-1. The measured cross-sections integrated over the fiducial region are 10.52 +/- 0.04 +/- 1.40 +1.64/-2.20 mub for prompt J/psi production and 1.14 +/- 0.01 +/- 0.16 mub for J/psi from b-hadron decays, where the first uncertainty is statistical and the second systematic. The prompt J/psi production cross-section is obtained assuming no J/psi polarisation and the third error indicates the acceptance uncertainty due to this assumption.

hep-ex

First observation of Bs -> J/psi f0(980) decays

Using data collected with the LHCb detector in proton-proton collisions at a centre-of-mass energy of 7 TeV, the hadronic decay Bs -> J/psi f0(980) is observed. This CP eigenstate mode could be used to measure mixing-induced CP violation in the B_s system. Using a fit to the pi+ pi- mass spectrum with interfering resonances gives R_{f0/phi} = [Gamma(Bs -> J/psi f0, f0 -> pi+ pi-)]/[Gamma(Bs -> J/psi phi, phi -> K+K-)] = 0.252^{+0.046+0.027}_{-0.032-0.033}, where the uncertainties are statistical and systematic, respectively.

hep-ex

Roadmap for selected key measurements of LHCb

Six of the key physics measurements that will be made by the LHCb experiment, concerning CP asymmetries and rare B decays, are discussed in detail. The "road map" towards the precision measurements is presented, including the use of control channels and other techniques to understand the performance of the detector with the first data from the LHC.

hep-ex

DIRAC - Distributed Infrastructure with Remote Agent Control

This paper describes DIRAC, the LHCb Monte Carlo production system. DIRAC has a client/server architecture based on: Compute elements distributed among the collaborating institutes; Databases for production management, bookkeeping (the metadata catalogue) and software configuration; Monitoring and cataloguing services for updating and accessing the databases. Locally installed software agents implemented in Python monitor the local batch queue, interrogate the production database for any outstanding production requests using the XML-RPC protocol and initiate the job submission. The agent checks and, if necessary, installs any required software automatically. After the job has processed the events, the agent transfers the output data and updates the metadata catalogue. DIRAC has been successfully installed at 18 collaborating institutes, including the DataGRID, and has been used in recent Physics Data Challenges. In the near to medium term future we must use a mixed environment with different types of grid middleware or no middleware. We describe how this flexibility has been achieved and how ubiquitously available grid middleware would improve DIRAC.

cs.DC

HEP Applications Evaluation of the EDG Testbed and Middleware

Workpackage 8 of the European Datagrid project was formed in January 2001 with representatives from the four LHC experiments, and with experiment independent people from five of the six main EDG partners. In September 2002 WP8 was strengthened by the addition of effort from BaBar and D0. The original mandate of WP8 was, following the definition of short- and long-term requirements, to port experiment software to the EDG middleware and testbed environment. A major additional activity has been testing the basic functionality and performance of this environment. This paper reviews experiences and evaluations in the areas of job submission, data management, mass storage handling, information systems and monitoring. It also comments on the problems of remote debugging, the portability of code, and scaling problems with increasing numbers of jobs, sites and nodes. Reference is made to the pioneeering work of Atlas and CMS in integrating the use of the EDG Testbed into their data challenges. A forward look is made to essential software developments within EDG and to the necessary cooperation between EDG and LCG for the LCG prototype due in mid 2003.

cs.DC