SearcharxivSearch

arXiv subjects

J. Craig

Publications and source records attributed to J. Craig.

10 recordsLinked to original sources

Design and characterization of the Large-Aperture Experiment to Detect the Dark Age (LEDA) radiometer systems

The Large-Aperture Experiment to Detect the Dark Age (LEDA) was designed to detect the predicted O(100)mK sky-averaged absorption of the Cosmic Microwave Background by Hydrogen in the neutral pre- and intergalactic medium just after the cosmological Dark Age. The spectral signature would be associated with emergence of a diffuse Ly$\alpha$ background from starlight during 'Cosmic Dawn'. Recently, Bowman et al. (2018) have reported detection of this predicted absorption feature, with an unexpectedly large amplitude of 530 mK, centered at 78 MHz. Verification of this result by an independent experiment, such as LEDA, is pressing. In this paper, we detail design and characterization of the LEDA radiometer systems, and a first-generation pipeline that instantiates a signal path model. Sited at the Owens Valley Radio Observatory Long Wavelength Array, LEDA systems include the station correlator, five well-separated redundant dual polarization radiometers and backend electronics. The radiometers deliver a 30-85MHz band (16<z<34) and operate as part of the larger interferometric array, for purposes ultimately of in situ calibration. Here, we report on the LEDA system design, calibration approach, and progress in characterization as of January 2016. The LEDA systems are currently being modified to improve performance near 78 MHz in order to verify the purported absorption feature.

astro-ph.IM

Digital Signal Processing using Stream High Performance Computing: A 512-input Broadband Correlator for Radio Astronomy

A "large-N" correlator that makes use of Field Programmable Gate Arrays and Graphics Processing Units has been deployed as the digital signal processing system for the Long Wavelength Array station at Owens Valley Radio Observatory (LWA-OV), to enable the Large Aperture Experiment to Detect the Dark Ages (LEDA). The system samples a ~100MHz baseband and processes signals from 512 antennas (256 dual polarization) over a ~58MHz instantaneous sub-band, achieving 16.8Tops/s and 0.236 Tbit/s throughput in a 9kW envelope and single rack footprint. The output data rate is 260MB/s for 9 second time averaging of cross-power and 1 second averaging of total-power data. At deployment, the LWA-OV correlator was the largest in production in terms of N and is the third largest in terms of complex multiply accumulations, after the Very Large Array and Atacama Large Millimeter Array. The correlator's comparatively fast development time and low cost establish a practical foundation for the scalability of a modular, heterogeneous, computing architecture.

astro-ph.IM

Limits on GRB Prompt Radio Emission Using the LWA1

As a backend to the first station of the Long Wavelength Array (LWA1) the Prototype All Sky Imager (PASI) has been imaging the sky $>$ -26$^{\circ}$ declination during 34 Gamma Ray Bursts (GRBs) between January 2012 and May 2013. Using this data we were able to put the most stringent limits to date on prompt low frequency emission from GRBs. While our limits depend on the zenith angle of the observed GRB, we estimate a 1$\sigma$ RMS sensitivity of 68, 65 and 70 Jy for 5 second integrations at 37.9, 52.0, and 74.0 MHz at zenith. These limits are relevant for pulses $\geq$ 5 s and are limited by dispersion smearing. For pulses of length 5 s we are limited to dispersion measures ($DM$s) $\leq$ 220, 570, and 1,600 pc cm$^{-3}$ for the frequencies above. For pulses lasting longer than 5s, the $DM$ limits increase linearly with the duration of the pulse. We also report two interesting transients, which are, as of yet, of unknown origin, and are not coincident with any known GRBs. For general transients, we give rate density limits of $\leq$ $7.5\times10^{-3}$, $2.9\times10^{-2}$, and $1.4\times10^{-2}$ yr$^{-1}$ deg$^{-2}$ with pulse energy densities $>1.3\times 10^{-22}$, $1.1\times 10^{-22}$, and $1.4\times 10^{-22}$ J m$^{-2}$ Hz$^{-1}$ and pulse widths of 5 s at the frequencies given above.

astro-ph.HE

A Scalable Hybrid FPGA/GPU FX Correlator

Radio astronomical imaging arrays comprising large numbers of antennas, O(10^2-10^3) have posed a signal processing challenge because of the required O(N^2) cross correlation of signals from each antenna and requisite signal routing. This motivated the implementation of a Packetized Correlator architecture that applies Field Programmable Gate Arrays (FPGAs) to the O(N) "F-stage" transforming time domain to frequency domain data, and Graphics Processing Units (GPUs) to the O(N^2) "X-stage" performing an outer product among spectra for each antenna. The design is readily scalable to at least O(10^3) antennas. Fringes, visibility amplitudes and sky image results obtained during field testing are presented.

astro-ph.IM

Detection and Flux Density Measurements of the Millisecond Pulsar J2145-0750 below 100 MHz

We present flux density measurements and pulse profiles for the millisecond pulsar PSR J2145-0750 spanning 37 to 81 MHz using data obtained from the first station of the Long Wavelength Array. These measurements represent the lowest frequency detection of pulsed emission from a millisecond pulsar to date. We find that the pulse profile is similar to that observed at 102 MHz. We also find that the flux density spectrum between ~40 MHz to 5 GHz is suggestive of a break and may be better fit by a model that includes spectral curvature with a rollover around 730 MHz rather than a single power law.

astro-ph.HE

Design and Commissioning of the LWA1 Radio Telescope

LWA1 is a new large radio telescope array operating in the frequency range 10-88 MHz, located in central New Mexico. The telescope consists of 260 pairs of dipole-type antennas whose outputs are individually digitized and formed into beams. Simultaneously, signals from all dipoles can be recorded using one of the telescope's "all dipoles" modes, facilitating all-sky imaging. Notable features of the instrument include four independently-steerable beams utilizing digital "true time delay" beamforming, high intrinsic sensitivity (about 6 kJy zenith system equivalent flux density), large instantaneous bandwidth (up to 78 MHz), and large field of view (about 3-10 degrees, depending on frequency and zenith angle of pointing). This paper summarizes the design of LWA1, its performance as determined in commissioning experiments, and results from early science observations demonstrating the capabilities of the instrument.

astro-ph.IM

Observations of Crab Giant Pulses in 20-84 MHz using LWA1

We report the detection and observed characteristics of giant pulses from the Crab Nebula pulsar (B0531+21) in four frequency bands covering 20-84 MHz using the recently-completed Long Wavelength Array Station 1 (LWA1) radio telescope. In 10 hours of observations distributed over a 72-day period in Fall of 2012, 33 giant pulses having peak flux densities between 400 Jy and 2000 Jy were detected. Twenty-two of these pulses were detected simultaneously in channels of 16 MHz bandwidth centered at 44 MHz, 60 MHz, and 76 MHz, including one pulse which was also detected in a channel centered at 28 MHz. We quantify statistics of pulse amplitude and pulse shape characteristics, including pulse broadening. Amplitude statistics are consistent with expectations based on extrapolations from previous work at higher and lower frequencies. Pulse broadening is found to be relatively high, but not significantly greater than expected. We present procedures that have been found to be effective for observing giant pulses in this frequency range.

astro-ph.HE

First Light for the First Station of the Long Wavelength Array

The first station of the Long Wavelength Array (LWA1) was completed in April 2011 and is currently performing observations resulting from its first call for proposals in addition to a continuing program of commissioning and characterization observations. The instrument consists of 258 dual-polarization dipoles, which are digitized and combined into beams. Four independently-steerable dual-polarization beams are available, each with two "tunings" of 16 MHz bandwidth that can be independently tuned to any frequency between 10 MHz and 88 MHz. The system equivalent flux density for zenith pointing is ~3 kJy and is approximately independent of frequency; this corresponds to a sensitivity of ~5 Jy/beam (5sigma, 1 s); making it one of the most sensitive meter-wavelength radio telescopes. LWA1 also has two "transient buffer" modes which allow coherent recording from all dipoles simultaneously, providing instantaneous all-sky field of view. LWA1 provides versatile and unique new capabilities for Galactic science, pulsar science, solar and planetary science, space weather, cosmology, and searches for astrophysical transients. Results from LWA1 will detect or tightly constrain the presence of hot Jupiters within 50 parsecs of Earth. LWA1 will provide excellent resolution in frequency and in time to examine phenomena such as solar bursts, and pulsars over a 4:1 frequency range that includes the poorly understood turnover and steep-spectrum regimes. Observations to date have proven LWA1's potential for pulsar observing, and just a few seconds with the completed 256-dipole LWA1 provide the most sensitive images of the sky at 23 MHz obtained yet. We are operating LWA1 as an open skies radio observatory, offering ~2000 beam-hours per year to the general community.

astro-ph.IM

The LWA1 Radio Telescope

LWA1 is a new radio telescope operating in the frequency range 10-88 MHz, located in central New Mexico. The telescope consists of 258 pairs of dipole-type antennas whose outputs are individually digitized and formed into beams. Simultaneously, signals from all dipoles can be recorded using one of the instrument's "all dipoles" modes, facilitating all-sky imaging. Notable features of the instrument include high intrinsic sensitivity (about 6 kJy zenith system equivalent flux density), large instantaneous bandwidth (up to 78 MHz), and 4 independently-steerable beams utilizing digital "true time delay" beamforming. This paper summarizes the design of LWA1 and its performance as determined in commissioning experiments. We describe the method currently in use for array calibration, and report on measurements of sensitivity and beamwidth.

astro-ph.IM