arXiv subjects

J. D. Frankland

Publications and source records attributed to J. D. Frankland.

At least 37 records · Page 2Linked to original sources

arXiv2020

Influence of fast emissions and statistical de-excitation on the isospin transport ratio

Isospin transport ratio is a powerful method to estimate the neutron-proton (n-p) equilibration in heavy-ion collisions, and extensively used to obtain information on the asy-stiffness of the nuclear Equation of State. In fact such a ratio is expected to bypass any perturbations introducing a linear transformation of the chosen observable. In particular, it is supposed to overcome contributions due to emission, either of dynamical or statistical nature, from the primary fragments formed during the collisions. In this paper we explore the validity of this assumption, looking at the quasi-projectile n-p ratio ($N/Z$) in peripheral and semi-peripheral events for Ca+Ca reactions at 35\amev{}, simulated via the Antisymmetrized Molecular Dynamics transport model, coupled to different statistical decay codes. The statistical de-excitation of the primary fragments introduces a linear transformation at relatively high excitation energies (above 2\amev{}) when the residue approaches the Evaporation Attractor Line, while some effect is produced at lower excitation energies due to the occurrence of some non-linearities. As for fast emissions after the end of the projectile-target interaction it is shown that they introduce a non-linear transformation too.

nucl-th↗

arXiv2020

Scission configuration of $^{239}$U from yields and kinetic information of fission fragments

The simultaneous measurement of the isotopic fission-fragment yields and fission-fragment velocities of $^{239}$U has been performed for the first time. The $^{239}$U fissioning system was produced in one-neutron transfer reactions between a $^{238}$U beam at 5.88 MeV/nucleon and a $^{9}$Be target. The combination of inverse kinematics at low energy and the use of the VAMOS++ spectrometer at the GANIL facility allows the isotopic identification of the full fission-fragment distribution and their velocity in the reference frame of the fissioning system. The proton and neutron content of the fragments at scission, their total kinetic and total excitation energy, as well as the neutron multiplicity were determined. Information from the scission point configuration is obtained from these observables and the correlation between them. The role of the octupole-deformed proton and neutron shells in the fission-fragment production is discussed.

nucl-ex↗

arXiv2019

Equilibrium constants of Hydrogen and Helium isotopes at low nuclear densities

Equilibrium constants for Hydrogen and Helium isotopes as a function of density and temperature are measured in the framework of the study made by Qin et al. [Qin L et al 2012 Phys. Rev. Lett. 108 172701]. We review and comment on all stages of the analysis and conclude that our measurements are not inconsistent with Qin et al. results. Improvements are being made to the initial analysis and we raise the issue of the binding energies which has to be clarified.

nucl-ex↗

arXiv2019

First direct measurement of isotopic fission-fragment yields of $^{239}$U

A direct and complete measurement of isotopic fission-fragment yields of $^{239}$U has been performed for the first time. The $^{239}$U fissioning system was produced with an average excitation energy of 8.3 MeV in one-neutron transfer reactions between a $^{238}$U beam and a $^{9}$Be target at Coulomb barrier energies. The fission fragments were detected and isotopically identified using the VAMOS++ spectrometer at the GANIL facility. This measurement allows to directly evaluate the fission models at excitation energies of fast neutrons, relevant for next-generation nuclear reactors. The present data, in agreement with model calculations, do not support the recently reported anomaly in the fission-fragment yields of $^{239}$U and confirm the persistence of spherical shell effects in the Sn region at excitation energies exceeding the fission barrier by few MeV.

nucl-ex↗

arXiv2019

The FAZIA setup: a review on the electronics and the mechanical mounting

In this paper the technological aspects of the FAZIA array will be explored. After a productive commissioning phase, FAZIA blocks started to measure and give very useful data to explore the physics of Fermi energy heavy-ion reactions. This was possible thanks to many technical measures and innovations developed in the commissioning phase and tuned during the first experimental campaigns. This paper gives a detailed description of the present status of the FAZIA setup from the electronic and mechanical point of view, trying also to trace a path for new improvements and refinements of the apparatus.

physics.ins-det↗

arXiv2019

Liquid-Gas phase transition in nuclei

This review article takes stock of the progress made in understanding the phase transition in hot nuclei and highlights the coherence of observed signatures

nucl-ex↗

arXiv2018

Phase transition dynamics for hot nuclei

An abnormal production of events with almost equal-sized fragments was theoretically proposed as a signature of spinodal instabilities responsible for nuclear multifragmentation in the Fermi energy domain. On the other hand finite size effects are predicted to strongly reduce this abnormal production. High statistics quasifusion hot nuclei produced in central collisions between Xe and Sn isotopes at 32 and 45 AMeV incident energies have been used to definitively establish, through the experimental measurement of charge correlations, the presence of spinodal instabilities. N/Z influence was also studied.

nucl-ex↗

arXiv2018

Study and validation of a new "3D Calorimetry" of hot nuclei with the HIPSE event generator

In nuclear thermodynamics, the determination of the excitation energy of hot nuclei is a fundamental experimental problem. Instrumental physicists have been trying to solve this problem for several years by building the most exhaustive 4Pi detector arrays and perfecting their calorimetry techniques. In a recent paper, a proposal for a new calorimetry, called "3D calorimetry", was made. It tries to optimize the separation between the particles and fragments emitted by the Quasi-Projectile and the other possible contributions. This can be achieved by determining the experimental probability for a given nucleus of a nuclear reaction to be emitted by the Quasi-Projectile. It has been developed for the INDRA data. In the present work, we wanted to dissect and validate this new method of characterization of a hot Quasi-Projectile. So we tried to understand and control it completely to determine these limits. Using the HIPSE event generator and a software simulating the functioning of INDRA, we were able to achieve this goal and provide a quantitative estimation of the quality of the QP characterization.

nucl-ex↗

arXiv2017

Sequential fission of highly excited compound nuclei in a 4D Langevin approach

In highly dissipative collisions between heavy ions, the optimal conditions to investigate different de-excitation channels of hot nuclei such as evaporation, fission or multifragmentation are well known. One crucial issue remains the excitation energy region where fission gives way to multifragmentation. In this paper, the onset of multi-fragment exit channels is investigated in terms of sequential fission. For the first time, the dynamical approach based on solving Langevin transport equations in multidimensional collective coordinate space is used to follow the de-excitation of highly excited (up to E* =223-656 MeV) 248Rf compound nuclei. The sequential fission model we propose contains two steps: (1) time evolution of the compound nucleus up to either scission or residue formation, followed by (2) dynamical calculations of each primary fragment separately. This procedure allows to obtain from one to four cold fragments correlated with the light particles emitted during the de-excitation process. Experimental data measured with the INDRA detector for the 129Xe+ natSn reaction at beam energies 8, 12 and 15 MeV/nucleon provide strong constraints for this sequential fission scenario.

nucl-th↗

arXiv2017

A new "3D Calorimetry" of hot nuclei

In the domain of Fermi energy, it is extremely complex to isolate experimentally fragments and particles issued from the cooling of a hot nucleus produced during a heavy ion collision. This paper presents a new method to characterize more precisely hot Quasi-Projectiles. It tries to take into account as accurately as possible the distortions generated by all the other potential participants in the nuclear reaction. It is quantitatively shown that this method is a major improvement respect to classic calorimetries used with a 4$π$ detector array. By detailing and deconvolving the different steps of the reconstitution of the hot nucleus, this study shows also the respective role played by the experimental device and the event selection criteria on the quality of the determination of QP characteristics.

physics.data-an↗

arXiv2017

Improving isotopic identification with \emph{INDRA} Silicon-CsI(\emph{Tl}) telescopes

Profiting from previous works done with the \emph{INDRA} multidetector on the description of the light response $\mathcal L$ of the CsI(\emph{Tl}) crystals to different impinging nuclei, we propose an improved $ΔE - \mathcal L$ identification-calibration procedure for Silicon-Cesium Iodide (Si-CsI) telescopes, namely an Advanced Mass Estimate (\emph{AME}) method. \emph{AME} is compared to the usual, %$"ΔE - E"$ simple visual analysis of the corresponding two-dimensional map of $ΔE - E$ type, by using \emph{INDRA} experimental data from nuclear reactions induced by heavy ions in the Fermi energy regime. We show that the capability of such telescopes to identify both the atomic $Z$ and the mass $A$ numbers of light and heavy reaction products, can be quantitatively improved thanks to the proposed approach. This conclusion opens new possibilities to use \emph{INDRA} for studying these reactions especially with radioactive beams. Indeed, the determination of the mass for charged reaction products becomes of paramount importance to shed light on the role of the isospin degree of freedom in the nuclear equation of state.

physics.ins-det↗

arXiv2017

Understand the thermometry of hot nuclei from the energy spectra of light charged particles

In the domain of Fermi energy, the hot nucleus temperature can be determined by using the energy spectra of evaporated light charged particles. But this method of measurement is not without difficulties both theoretical and experimental. The presented study aims to disentangle the respective influences of different factors on the quality of this measurement : the physics, the detection (a 4? detector array as INDRA) and the experimental procedure. This analysis demonstrates the possibility of determining from an energy spectrum, with an accuracy of about 10 %, the true apparent temperature felt by a given type of particle emitted by a hot nucleus. Three conditions are however necessary : have a perfect detector of particles, an important statistics and very few secondary emissions. According to the GEMINI event generator, for hot nuclei of intermediate mass, only deuterons and tritons could fill these conditions. This temperature can allow to trace back to the initial temperature by using an appropriate method. This determination may be better than 15 %. With a real experimental device, an insufficient angular resolution and topological distortions caused by the detection can damage spectra to the point to make very difficult a correct determination of the apparent temperature. The experimental reconstruction of the frame of the hot nucleus may also be responsible for this deterioration

nucl-ex↗

arXiv2017

Light charged clusters emitted in 32 MeV/nucleon 136,124Xe+124,112Sn reactions: chemical equilibrium, 3He and 6He production

Nuclear particle production from peripheral to central events is presented. N/Z gradient between projectile and target is studied using the fact that two reactions have the same projectile+target N/Z and so the same neutron to proton ratio for the combined system. Inclusive data study in the forward part of the center of mass indicates that N/Z equilibration between the projectile-like and the target-like is achieved for central collisions. Particles are also produced from mid-rapidity region. 3He mean pre-equilibrium character is evidenced and 6He production at mid-rapidity implies a neutron enrichment phenomenon of the projectile target interacting zone.

nucl-ex↗

arXiv2016

Semi-automatic charge and mass identification in two-dimensional matrices

This article presents a new semi-automatic method for charge and mass identification in two-dimensional matrices. The proposed algorithm is based on the matrix's properties and uses as little information as possible on the global form of the identification lines, making it applicable to a large variety of matrices, including Particular attention has been paid to the implementation in a suitable graphical environment, so that only two mouse-clicks are required from the user to calculate all initialization parameters. Example applications to recent data from both INDRA and FAZIA telescopes are presented.

physics.ins-det↗

arXiv2016

Reaction and fusion cross sections for the near-symmetric system $^{129}Xe+^{nat}Sn$ from $8$ to $35$ $AMeV$

\item[Background]Heavy-ion reactions from barrier up to Fermi energy. \item[Purpose]Reaction and fusion cross sections determination. Fusion reactions induced by $^{129}Xe$ projectiles on $^{nat}Sn$ targets for energies ranging from $8$ A.MeV to $35$ A.MeV were measured with the INDRA $4π$-array.\\ The evaluation of the fusion/incomplete fusion cross sections for the incident energies from 8 to 35 A.MeV is the main purpose of this paper. \item[Method] The reaction cross sections are evaluated for each beam energy thanks to INDRA $4π$-array. The events are also sorted in order to focus the study on a selected sample of events, in such a way that the fusion/fusion incomplete cross section is estimated. \item[Results] The excitation function of reaction and fusion cross sections were measured for the heavy and nearly symmetric system $^{129}Xe + ^{nat}Sn$ from 8 to 35 A.MeV. \item[Conclusions] The fusion-like cross-sections evaluated show a good agrement with a recent systematics for beam energies greater than 20 A.MeV. For low beam energies the cross-section values are lower than the expected ones. A probable reason for these low values is in the fusion hindrance at energies above/close the barrier.

nucl-ex↗

arXiv2014

Evidence for a Novel Reaction Mechanism of a Prompt Shock-Induced Fission Following the Fusion of 78Kr and 40Ca Nuclei at E/A =10 MeV

An analysis of experimental data from the inverse-kinematics ISODEC experiment on 78Kr+40Ca reaction at a bombarding energy of 10 AMeV has revealed signatures of a hitherto unknown reaction mechanism, intermediate between the classical damped binary collisions and fusion-fission, but also substantially different from what is being termed in the literature as fast fission or quasi fission. These signatures point to a scenario where the system fuses transiently while virtually equilibrating mass asymmetry and energy and, yet, keeping part of the energy stored in a collective shock-imparted and, possibly, angular momentum bearing form of excitation. Subsequently the system fissions dynamically along the collision or shock axis with the emerging fragments featuring a broad mass spectrum centered around symmetric fission, relative velocities somewhat higher along the fission axis than in transverse direction, and virtually no intrinsic spin. The class of massasymmetric fission events shows a distinct preference for the more massive fragments to proceed along the beam direction, a characteristic reminiscent of that reported earlier for dynamic fragmentation of projectile-like fragments alone and pointing to the memory of the initial mass and velocity distribution.

nucl-ex↗

arXiv2014

Investigation of collective radial expansion and stopping in heavy ion collisions at Fermi energies

We present an analysis of multifragmentation events observed in central Xe+Sn reactions at Fermi energies. Performing a comparison between the predictions of the Stochastic Mean Field (SMF) transport model and experimental data, we investigate the impact of the compression-expansion dynamics on the properties of the final reaction products. We show that the amount of radial collective expansion, which characterizes the dynamical stage of the reaction, influences directly the onset of multifragmentation and the kinematic properties of multifragmentation events. For the same set of events we also undertake a shape analysis in momentum space, looking at the degree of stopping reached in the collision, as proposed in recent experimental studies. We show that full stopping is achieved for the most central collisions at Fermi energies. However, considering the same central event selection as in the experimental data, we observe a similar behavior of the stopping power with the beam energy, which can be associated with a change of the fragmentation mechanism, from statistical to prompt fragment emission.

nucl-ex↗

arXiv2014

Energy measurement and fragment identification using digital signals from partially depleted Si detectors

A study of identification properties of a Si-Si DE-E telescope exploiting an underdepleted residual-energy detector has been performed. Five different bias voltages have been used, one corresponding to full depletion, the others associated with a depleted layer ranging from 90% to 60% of the detector thickness. Fragment identification has been performed using either the DE-E technique or Pulse Shape Analysis (PSA). Both detectors are reverse mounted: particles enter from the low field side, to enhance the PSA performance. The achieved charge and mass resolution has been quantitatively expressed using a Figure of Merit (FoM). Charge collection efficiency has been evaluated and the possibility of energy calibration corrections has been considered. We find that the DE-E performance is not affected by incomplete depletion even when only 60% of the wafer is depleted. Isotopic separation capability improves at lower bias voltages with respect to full depletion, though charge identification thresholds are higher than at full depletion. Good isotopic identification via PSA has been obtained from a partially depleted detector whose doping uniformity is not good enough for isotopic identification at full depletion.

physics.ins-det↗