arXiv subjects

J. D. Hare

Publications and source records attributed to J. D. Hare.

18 recordsLinked to original sources

arXiv2026

Delayed current sheet formation due to an external field in pulsed-power-driven reconnection experiments

We present results from pulsed-power-driven magnetic reconnection experiments, in which we drove two exploding wire arrays in parallel to produce colliding plasma flows with anti-parallel magnetic fields of 1.2$\pm$0.2 T. The experimental volume was surrounded by a Helmholtz coil pair capable of externally applying a field of up to 2 T, parallel to the reconnecting electric field. We diagnosed these experiments using laser interferometric imaging in the direction of the anti-parallel magnetic fields, gated extreme ultraviolet pinhole imaging, and in situ inductive probes. For zero and weak (0.5 T) external fields, we reproduce previous observations in which a dense reconnection layer forms between the two wire arrays. However, when we apply a strong external field (2 T), we observe a void between the arrays rather than a dense layer, and we hypothesise that the external field is frozen out of the plasma and provides a back-pressure which decelerates the flows. Our experimental results are compared with three-dimensional magnetohydrodynamic simulations of the experiment, which qualitatively support this hypothesis. These simulations allow us to study the pressure balance and dynamics of the current sheet aspect ratio, demonstrating the delayed formation of the reconnection layer due to the external field.

physics.plasm-ph↗

arXiv2025

Resistive diffusion and radiative cooling effects in magnetized oblique shocks

Magnetized oblique shocks are of interest in various plasmas, including in astrophysical systems, magneto-inertial confinement fusion experiments, and in aerospace applications. Through experiments on the COBRA pulsed power facility (Cornell University, 1~MA peak current, 100~ns rise time), we investigate oblique shock formation in a system with a magnetic field, and where both radiative cooling and resistive diffusion are important. Compared to previous pulsed power experiments, which have investigated quasi-parallel oblique shocks, here we consider perpendicular-type shocks, which can support magnetic field compression. In our experiments, supersonic, super-Alfvénic, collisional plasma flows, generated using an aluminum exploding wire array, are deflected by angled obstacles to generate oblique shocks. The shocks are imaged using laser shadowgraphy and Mach-Zehnder interferometry, while optical Thomson scattering provides measurements of the flow velocity and temperature. The shocks exhibit shallower shock angles and higher density compression, when compared to canonical Rankine-Hugoniot predictions. These results are best described by a model that includes both resistive diffusion and radiative cooling, consistent with the values of the cooling parameter and the resistive diffusion length in the experiment.

physics.plasm-ph↗

arXiv2024

Quadrupolar Density Structures in Driven Magnetic Reconnection Experiments with a Guide Field

Magnetic reconnection is a ubiquitous process in plasma physics, driving rapid and energetic events such as coronal mass ejections. Reconnection between magnetic fields with arbitrary shear can be decomposed into an anti-parallel, reconnecting component, and a non-reconnecting guide-field component which is parallel to the reconnecting electric field. This guide field modifies the structure of the reconnection layer and the reconnection rate. We present results from experiments on the MAIZE pulsed-power generator (500 kA peak current, 200 ns rise-time) which use two exploding wire arrays, tilted in opposite directions, to embed a guide field in the plasma flows with a relative strength $b\equiv B_g/B_{rec}=\text{0, 0.4, or 1}$. The reconnection layers in these experiments have widths which are less than the ion skin depth, $d_i=c/ω_{pi}$, indicating the importance of the Hall term, which generates a distinctive quadrupolar magnetic field structure along the separatrices of the reconnection layer. Using laser imaging interferometry, we observe quadrupolar structures in the line-integrated electron density, consistent with the interaction of the embedded guide field with the quadrupolar Hall field. Our measurements extend over much larger length scales ($40 d_i$) at higher $β$ ($\sim 1$) than previous experiments, providing an insight into the global structure of the reconnection layer.

physics.plasm-ph↗

arXiv2024

Structure and Dynamics of Magneto-Inertial, Differentially Rotating Laboratory Plasmas

We present a detailed characterization of the structure and evolution of differentially rotating plasmas driven on the MAGPIE pulsed-power generator (1.4 MA peak current, 240 ns rise-time). The experiments were designed to simulate physics relevant to accretion discs and jets on laboratory scales. A cylindrical aluminium wire array Z pinch enclosed by return posts with an overall azimuthal off-set angle was driven to produce ablation plasma flows that propagate inwards in a slightly off-radial trajectory, injecting mass, angular momentum, and confining ram pressure to a rotating plasma column on the axis. However, the plasma is free to expand axially, forming a collimated, differentially rotating axial jet that propagates at $\approx 100$ km/s. The density profile of the jet corresponds to a dense shell surrounding a low-density core, which is consistent with the centrifugal barrier effect being sustained along the jet's propagation. We show analytically that, as the rotating plasma accretes mass, conservation of mass and momentum implies plasma radial growth scaling as $r \propto t^{1/3}$. As the characteristic moment of inertia increases, the rotation velocity is predicted to decrease and settle on a characteristic value $\approx 20$ km/s. We find that both predictions are in agreement with Thomson scattering and optical self-emission imaging measurements.

physics.plasm-ph↗

arXiv2024

On The Structure of Plasma Jets in the Rotating Plasma Experiment

Recent pulsed-power experiments have demonstrated the formation of astrophysically-relevant, differentially rotating plasmas [1]. Key features of the plasma flows are the discovery of a quasi-Keplerian rotation curve, the launching of highly-collimated angular-momentum-transporting axial jets, and a hollow density structure sustained by the centrifugal barrier effect. In this communication we discuss several features of the plasma structure in these experiments through order-of-magnitude models. First, we show that the observed rotation velocity would produce a centrifugal force strong enough to support the hollow density profile. Second, we show that the axial jet should diverge much faster than what was observed, were it not for a magnetized halo with 3T which surrounds the jet and exerts pressure on the interface.Finally, we discuss the temperature structure in the axial jet and plasma halo.We show that a 3T magnetic field would also suppress electron heat conduction,leading to the flat profile observed experimentally. We also find that the axial jet is efficiently radiatively cooled,whereas the halo is not, which would explain the thermal decoupling between the two regions.

physics.plasm-ph↗

arXiv2024

Plasmoid formation and strong radiative cooling in a driven magnetic reconnection experiment

We present results from the first experimental study of strongly radiatively-cooled magnetic reconnection. Two exploding aluminum wire arrays, driven simultaneously by the Z machine ($I_{max} = 20 \, \text{MA}$, $t_{\text{rise}} = 300 \, \text{ns}$), generate a radiatively-cooled reconnection layer ($S_L \approx 120$) in which the total cooling rate exceeds the hydrodynamic transit rate ($τ_{\text{hydro}}/τ_{\text{cool}} > 100$). Measurements of X-ray emission from the reconnection layer using a filtered diode ($>1$ keV) show a narrow (50 ns FWHM) burst of emission at 220 ns after current start, consistent with the formation and subsequent rapid cooling of the reconnection layer. Time-gated X-ray images of the reconnection layer show fast-moving (up to 50 km/s) hotspots inside the layer, consistent with the presence of plasmoids observed in 3D resistive magnetohydrodynamic simulations. X-ray spectroscopy shows that these hotspots generate the majority of Al K-shell emission (at around 1.6 keV) prior to the onset of cooling, and exhibit temperatures of 170 eV, much greater than the temperature of the plasma inflows and the rest of the reconnection layer.

physics.plasm-ph↗

arXiv2023

Radiative cooling effects on reverse shocks formed by magnetised supersonic plasma flows

We study the structure of reverse shocks formed by the collision of supersonic, magnetised plasma flows driven by an inverse (or exploding) wire array with a planar conducting obstacle. We observe that the structure of these reverse shocks varies dramatically with wire material, despite the similar upstream flow velocities and mass densities. For aluminium wire arrays, the shock is sharp and well defined, consistent with magneto-hydrodynamic theory. In contrast, we do not observe a well-defined shock using tungsten wires, instead, we see a broad region dominated by density fluctuations on a wide range of spatial scales. We diagnose these two very different interactions using interferometry, Thomson scattering, shadowgraphy, and a newly developed imaging refractometer which is sensitive to small deflections of the probing laser corresponding to small-scale density perturbations. We conclude that the differences in shock structure are most likely due to radiative cooling instabilities which create small-scale density perturbations elongated along magnetic field lines in the tungsten plasma. These instabilities grow more slowly and are smoothed by thermal conduction in the aluminium plasma.

physics.plasm-ph↗

arXiv2023

Plasma flows during the ablation stage of an over-massed pulsed-power-driven exploding planar wire array

We characterize the plasma flows generated during the ablation stage of an over-massed exploding planar wire array, fielded on the COBRA pulsed-power facility (1 MA peak current, 250 ns rise time). The planar wire array is designed to provide a driving magnetic field (80-100 T) and current per wire distribution (about 60 kA), similar to that in a 10 MA cylindrical exploding wire array fielded on the Z machine. Over-massing the arrays enables continuous plasma ablation over the duration of the experiment. The requirement to over-mass on the Z machine necessitates wires with diameters of 75-100 $μ$m, which are thicker than wires usually fielded on wire array experiments. To test ablation with thicker wires, we perform a parametric study by varying the initial wire diameter between 33-100 $μ$m. The largest wire diameter (100 $μ$m) array exhibits early closure of the AK gap, while the gap remains open during the duration of the experiment for wire diameters between 33-75 $μ$m. Laser plasma interferometry and time-gated XUV imaging are used to probe the plasma flows ablating from the wires. The plasma flows from the wires converge to generate a pinch, which appears as a fast-moving ($V \approx {100}$ kms$^{-1}$) column of increased plasma density ($\bar{n}_e \approx 2 \times 10^{18}$ cm$^{-3}$) and strong XUV emission. Finally, we compare the results with three-dimensional resistive-magnetohydrodynamic (MHD) simulations performed using the code GORGON, the results of which reproduce the dynamics of the experiment reasonably well.

physics.plasm-ph↗

arXiv2022

Experimental Evidence of Plasmoids in High-$β$ Magnetic Reconnection

Magnetic reconnection is a ubiquitous and fundamental process in plasmas by which magnetic fields change their topology and release magnetic energy. Despite decades of research, the physics governing the reconnection process in many parameter regimes remains controversial. Contemporary reconnection theories predict that long, narrow current sheets are susceptible to the tearing instability and split into isolated magnetic islands (or plasmoids), resulting in an enhanced reconnection rate. While several experimental observations of plasmoids in the regime of low- to intermediate-$β$ (where $β$ is the ratio of plasma thermal pressure to magnetic pressure) have been made, there is a relative lack of experimental evidence for plasmoids in the high-$β$ reconnection environments which are typical in many space and astrophysical contexts. Here, we report the observation of strong experimental evidence for plasmoid formation and dynamics in laser-driven high-$β$ reconnection experiments.

physics.plasm-ph↗

arXiv2022

Time-resolved velocity and ion sound speed measurements from simultaneous bow shock imaging and inductive probe measurements

We present a technique to measure the time-resolved velocity and ion sound speed in magnetized, supersonic high-energy-density plasmas. We place an inductive (`b-dot') probe in a supersonic pulsed-power-driven plasma flow and measure the magnetic field advected by the plasma. As the magnetic Reynolds number is large ($R_M > 10$), the plasma flow advects a magnetic field proportional to the current at the load. This enables us to estimate the plasma flow velocity as a function of time from the delay between the current at the load and the signal at the probe. The supersonic flow also generates a detached hydrodynamic bow shock around the probe, the structure of which depends on the upstream sonic Mach number. By imaging the shock around the probe with a Mach-Zehnder interferometer, we determine the upstream Mach number from the shock Mach angle, which we then use to determine the ion sound speed from the known upstream velocity. We use the measured sound speed to infer the value of $\bar{Z}T_e$, where $\bar{Z}$ is the average ionization, and $T_e$ is the electron temperature. We use this diagnostic to measure the time-resolved velocity and sound speed of a supersonic $(M_S \sim 8)$, super-Alfvénic $(M_A \sim 2)$ aluminum plasma generated during the ablation stage of an exploding wire array on the MAGPIE generator (1.4 MA, 250 ns). Velocity and $\bar{Z}T_e$ measured using this technique agree well with optical Thompson scattering measurements reported in literature, and with 3D resistive MHD simulations in GORGON.

physics.plasm-ph↗

arXiv2022

Characterization of Quasi-Keplerian, Differentially Rotating, Free-Boundary Laboratory Plasmas

We present results from pulsed-power driven differentially rotating plasma experiments designed to simulate physics relevant to astrophysical disks and jets. In these experiments, angular momentum is injected by the ram pressure of the ablation flows from a wire array Z pinch. In contrast to previous liquid metal and plasma experiments, rotation is not driven by boundary forces. Axial pressure gradients launch a rotating plasma jet upwards, which is confined by a combination of ram, thermal, and magnetic pressure of a surrounding plasma halo. The jet has subsonic rotation, with a maximum rotation velocity $23 \pm 3$ km/s. The rotational velocity profile is quasi-Keplerian with a positive Rayleigh discriminant $κ^2 \propto r^{-2.8\pm0.8}$ rad$^2$/s$^2$. The plasma completes $0.5 - 2$ full rotations in the experimental time frame ($\sim 150$ ns).

physics.plasm-ph↗

arXiv2022

Perpendicular subcritical shock structure in a collisional plasma experiment

We present a study of perpendicular subcritical shocks in a collisional laboratory plasma. Shocks are produced by placing obstacles into the super-magnetosonic outflow from an inverse wire array z-pinch. We demonstrate the existence of subcritical shocks in this regime and find that secondary shocks form in the downstream. Detailed measurements of the subcritical shock structure confirm the absence of a hydrodynamic jump. We calculate the classical (Spitzer) resistive diffusion length and show that it is approximately equal to the shock width. We measure little heating across the shock (< 10 % of the ion kinetic energy) which is consistent with an absence of viscous dissipation.

physics.plasm-ph↗

arXiv2021

An Imaging Refractometer for Density Fluctuation Measurements in High Energy Density Plasmas

We report on a recently developed laser-probing diagnostic which allows direct measurements of ray-deflection angles in one axis, whilst retaining imaging capabilities in the other axis. This allows us to measure the spectrum of angular deflections from a laser beam which passes though a turbulent high-energy-density plasma. This spectrum contains information about the density fluctuations within the plasma, which deflect the probing laser over a range of angles. %The principle of this diagnostic is described, along with our specific experimental realisation. We create synthetic diagnostics using ray-tracing to compare this new diagnostic with standard shadowgraphy and schlieren imaging approaches, which demonstrates the enhanced sensitivity of this new diagnostic over standard techniques. We present experimental data from turbulence behind a reverse shock in a plasma and demonstrate that this technique can measure angular deflections between 0.06 and 34 mrad, corresponding to a dynamic range of over 500.

physics.plasm-ph↗

arXiv2019

Two-Colour Interferometry and Thomson Scattering Measurements of a Plasma Gun

We present experimental measurements of a pulsed plasma gun, using two-colour imaging laser interferometry and spatially resolved Thomson scattering. Interferometry measurements give an electron density $n_e\approx2.7\times10^{17}$ cm$^{-3}$ at the centre of the plasma plume, at 5 mm from the plasma gun nozzle. The Thomson scattered light is collected from two probing angles allowed us to simultaneously measure the collective and non-collective spectrum of the electron feature from the same spatial locations. The inferred electron densities from the location of the electron plasma waves is in agreement with interferometry. The electron temperatures inferred from the two spectra are not consistent, with $T_e\approx 10$ eV for non-collective scattering and $T_e\approx 30$ eV for collective scattering. We discuss various broadening mechanisms such as finite aperture effects, density gradients within the collective volume and collisional broadening to account for some of this discrepancy. We also note the significant red/blue asymmetry of the electron plasma waves in the collective scattering spectra, which could relate to kinetic effects distorting the distribution function of the electrons.

physics.plasm-ph↗

arXiv2018

Ion heating and magnetic flux pile-up in a magnetic reconnection experiment with super-Alfvenic plasma inflows

This work presents a magnetic reconnection experiment in which the kinetic, magnetic and thermal properties of the plasma each play an important role in the overall energy balance and structure of the generated reconnection layer. Magnetic reconnection occurs during the interaction of continuous and steady flows of super-Alfvenic, magnetized, aluminum plasma, which collide in a geometry with two-dimensional symmetry, producing a stable and long-lasting reconnection layer. Optical Thomson scattering measurements show that when the layer forms, ions inside the layer are more strongly heated than electrons, reaching temperatures of Ti~ZTe>300 eV - much greater than can be expected from strong shock and viscous heating alone. Later in time, as the plasma density in the layer increases, the electron and ion temperatures are found to equilibrate, and a constant plasma temperature is achieved through a balance of the heating mechanisms and radiative losses of the plasma. Measurements from Faraday rotation polarimetry also indicate the presence of significant magnetic field pile-up occurring at the boundary of the reconnection region, which is consistent with the super-Alfvenic velocity of the inflows.

physics.plasm-ph↗

arXiv2018

An Experimental Platform for Pulsed-Power Driven Magnetic Reconnection

We describe a versatile pulsed-power driven platform for magnetic reconnection experiments, based on exploding wire arrays driven in parallel [Suttle, L. G. et al. PRL, 116, 225001]. This platform produces inherently magnetised plasma flows for the duration of the generator current pulse (250 ns), resulting in a long-lasting reconnection layer. The layer exists for long enough to allow evolution of complex processes such as plasmoid formation and movement to be diagnosed by a suite of high spatial and temporal resolution laser-based diagnostics. We can access a wide range of magnetic reconnection regimes by changing the wire material or moving the electrodes inside the wire arrays. We present results with aluminium and carbon wires, in which the parameters of the inflows and the layer which forms are significantly different. By moving the electrodes inside the wire arrays, we change how strongly the inflows are driven. This enables us to study both symmetric reconnection in a range of different regimes, and asymmetric reconnection.

physics.plasm-ph↗

arXiv2017

Formation and Structure of a Current Sheet in Pulsed-Power Driven Magnetic Reconnection Experiments

We describe magnetic reconnection experiments using a new, pulsed-power driven experimental platform in which the inflows are super-sonic but sub-Alfvénic.The intrinsically magnetised plasma flows are long lasting, producing a well-defined reconnection layer that persists over many hydrodynamic time scales.The layer is diagnosed using a suite of high resolution laser based diagnostics which provide measurements of the electron density, reconnecting magnetic field, inflow and outflow velocities and the electron and ion temperatures.Using these measurements we observe a balance between the power flow into and out of the layer, and we find that the heating rates for the electrons and ions are significantly in excess of the classical predictions. The formation of plasmoids is observed in laser interferometry and optical self-emission, and the magnetic O-point structure of these plasmoids is confirmed using magnetic probes.

physics.plasm-ph↗

arXiv2017

Anomalous Heating and Plasmoid Formation in a Driven Magnetic Reconnection Experiment

We present a detailed study of magnetic reconnection in a quasi-two-dimensional pulsed-power driven laboratory experiment. Oppositely directed magnetic fields $(B=3$ T), advected by supersonic, sub-Alfvénic carbon plasma flows $(V_{in}=50$ km/s), are brought together and mutually annihilate inside a thin current layer ($δ=0.6$ mm). Temporally and spatially resolved optical diagnostics, including interferometry, Faraday rotation imaging and Thomson scattering, allow us to determine the structure and dynamics of this layer, the nature of the inflows and outflows and the detailed energy partition during the reconnection process. We measure high electron and ion temperatures $(T_e=100$ eV, $T_i=600$ eV), far in excess of what can be attributed to classical (Spitzer) resistive and viscous dissipation. We observe the repeated formation and ejection of plasmoids, which we interpret as evidence of two-fluid effects in our experiment.

physics.plasm-ph↗