arXiv subjects

J. D. Moody

Publications and source records attributed to J. D. Moody.

12 recordsLinked to original sources

arXiv2026

Spherical compression of an applied magnetic field in inertial confinement fusion

Applying an external magnetic field to laser-driven inertial confinement fusion implosions is a promising approach for enhancing fusion yield. The field is compressed with the plasma, producing a magnetized hotspot that anisotropically suppresses thermal losses and traps alpha particles, making performance sensitive to the compressed field orientation. We derive a simple, readily applicable analytic model that enables rapid evaluation of the compressed field topology and show that ablation into the hotspot amplifies the central field, while the ablated ice near the hotspot edge develops a decaying, radially bent field, with a discontinuity in the field direction. The radially bent field renders thermal insulation at the hotspot edge negligible and largely independent of the applied field strength, whereas insulation in the hotspot core still depends strongly on the applied field. Applying the model to non-axial initial field configurations, we find that an initially applied mirror field provides the greatest suppression, followed by the standard axial field.

physics.plasm-ph↗

arXiv2026

Integrated Radiation-Magneto-Hydrodynamic Simulations of Magnetized Burning Plasmas. I. Magnetizing Ignition-Class Designs

Motivated by breakthroughs in inertial confinement fusion (ICF), first achieving ignition conditions in National Ignition Facility (NIF) shot N210808 and then laser energy breakeven in N221204, modeling efforts here investigate the effect of imposed magnetic fields on integrated hohlraum simulations of igniting systems. Previous NIF experiments have shown yield and hotspot temperature to increase in magnetized, gas-filled capsules in line with scalings. In this work, we use the 2D radiation-magnetohydrodynamics code Lasnex with a Livermore ICF common model. Simulations are tuned to closely approximate data from unmagnetized experiments. Investigated here is the effect of imposed axial fields of up to 100 T on the fusion output of high-performing ICF shots, specifically the record BigFoot shot N180128, and HYBRID-E shots N210808 and N221204. The main observed effect is an increase in the hotspot temperature due to magnetic insulation. Namely, electron heat flow is constrained perpendicular to the magnetic field and alpha trajectories transition to gyro-orbits, enhancing energy deposition. In addition, we investigate the impact of applied magnetic fields to future NIF designs, specifically an example Enhanced Yield Capability design with 3 MJ of laser energy as well as a high-\r{ho}R, low implosion velocity "Pushered Single Shell" design. In conclusion, magnetization with field strengths of 5-75 T is found to increase the burn-averaged ion temperature by 50% and the neutron yield by 2-12. Specifically, we see yield enhancement of at least 50% with only a 5-10 T applied magnetic field for N221204, while a 65 T field on N210808 with symmetrization gives an 8 increase in yield. This is all without further design optimization to best take advantage of an applied B field, which promises even greater improvements for designs tailored specifically towards magnetization.

physics.plasm-ph↗

arXiv2025

Magnetized ICF implosions: ignition at low laser energy using designs with more ablator mass remaining

This paper is the first work to redesign a spherical ICF implosion to best utilize the benefits of applying an external magnetic field. The sub-ignition experiment N170601 is taken as the baseline design, which used 1.57MJ of laser energy. The optimum magnetized design benefits from increasing the shell thickness by 14$μ$m and decreasing the ice thickness by 18$μ$m, resulting in a neutron yield of 8.9$\times$10$^{17}$. This is 34$\times$ greater than the unmagnetized simulation of the same design, and 18.5$\times$ the greatest unmagnetized simulation across all designs simulated. The resultant implosion velocity for the magnetized design is lower, which would also reduce ablation front instability growth. This design was found by using a simplified 1D magnetization model, then validated against full 2D extended-MHD capsule simulations with radiation asymmetries applied to correct the shape.

physics.plasm-ph↗

arXiv2025

Hot-spot model for inertial confinement fusion implosions with an applied magnetic field

Imposing a magnetic field on inertial confinement fusion (ICF) implosions magnetizes the electrons in the compressed fuel; this suppresses thermal losses which increases temperature and fusion yield. Indirect-drive experiments at the National Ignition Facility (NIF) with 12 T and 26 T applied magnetic fields demonstrate up to $40\%$ increase in temperature, 3x increase in fusion yield, and indicate that magnetization alters the radial temperature profile [J.D. Moody $\mathrm{\textit{et al.}}$, Phys. Rev. Lett. $\mathrm{\textbf{129}}$, 195002 (2022), B. Lahmann et al., APS DPP 2022]. In this work, we develop a semi-analytic hot-spot model which accounts for the 2D Braginskii anisotropic heat flow due to an applied axial magnetic field. Firstly, we show that hot-spot magnetization alters the radial temperature profile, increasing the central peakedness which is most pronounced for moderately magnetized implosions (with 8-14 T applied field), compared to both unmagnetized (with no applied field) and highly magnetized (with 26 T or higher applied field) implosions. This model explains the trend in the experimental data which finds a similarly altered temperature profile in the 12 T experiment. Next, we derive the hot-spot model for gas-filled (Symcap) implosions, accounting for the effects of magnetization on the thermal conduction and in changing the radial temperature (and density) profiles. Using this model, we compute predicted central temperature amplification and yield enhancement scaling with the applied magnetic field. The central temperature fits the experimental data accurately, and the discrepancy in the yield suggests a systematic (independent of applied field) degradation such as mix, and additional degradation in the reference unmagnetized shot such as reduced laser drive, increased implosion asymmetry, or the magnetic field suppressing ablator mixing into the hot-spot.

physics.plasm-ph↗

arXiv2024

Magnetized ICF implosions: Non-axial magnetic field topologies

This paper explores 4 different magnetic field topologies for application to spherical inertial confinement fusion implosions: axial, mirror, cusp and closed field lines. A mirror field is found to enhance the impact of magnetization over an axial field; this is because the mirror field more closely follows the hot-spot surface. A cusp field, while simple to generate, is not found to have any benefits over the tried-and-tested axial field. Closed field lines are found to be of the greatest benefit to hot-spot performance, with the simulated design undergoing a 2x increase in ion temperature before alpha-heating is considered. The plasma properties of the simulation with closed field lines are radically different from the unmagnetized counterpart, with electron temperatures in excess of 100 keV, suggesting that a fundamental redesign of the capsule implosion is possible if this method is pursued.

physics.plasm-ph↗

arXiv2024

Burn Propagation in Magnetized High-Yield Inertial Fusion

Recent experiments at the National Ignition Facility (NIF) have demonstrated ignition for the first time in an inertial confinement fusion (ICF) experiment, a major milestone allowing the possibility of high energy gain through burn propagation. Use of external magnetic fields, applied primarily to reduce thermal losses, could increase hotspot temperature and ease requirements for ignition, opening up the capsule design space for high energy gain. However, this same restriction of thermal transport has the potential to inhibit burn propagation, which is vital in the attainment of high gain. In this work, radiation-magnetohydrodynamics (MHD) simulations carried out using the code Chimera are used to investigate the effect of a pre-imposed magnetic field on ignition and burn propagation. This paper studies the propagation of burn using both an idealized planar model and in fully-integrated 2D MHD simulations of an igniting NIF capsule. A study of magnetised burn propagation in the idealized planar model identifies three regimes of magnetized burn propagation: (1) thermal conduction driven; (2) alpha transport driven; and (3) fully suppressed burn. Simulations of NIF shot N210808 with an applied 40T axial field show clear indication of burn suppression perpendicular to field lines, with rapid burn observed along field lines. Implosion shape is altered by the field, and anisotropic conduction causes significant modification to the rate of ablation during stagnation. These results highlight the fundamental changes to implosion dynamics in high yield magnetized ICF and motivate further study to better optimize future magnetized target designs for high gain.

physics.plasm-ph↗

arXiv2024

Design and Modeling of Indirectly-Driven Magnetized Implosions on the NIF

The use of magnetic fields to improve the performance of hohlraum-driven implosions on the National Ignition Facility (NIF) is discussed. The focus is on magnetically insulated inertial confinement fusion (ICF), where the primary field effect is to reduce electron-thermal and alpha-particle loss from the compressed hotspot (magnetic pressure is of secondary importance). We summarize the requirements to achieve this state. The design of recent NIF magnetized hohlraum experiments is presented. These are close to earlier shots in the three-shock, high-adiabat (BigFoot) campaign, subject to the constraints that magnetized NIF targets must be fielded at room-temperature, and use < 1 MJ of laser energy to avoid risk of optics damage from stimulated Brillouin scattering. We present results from the original magnetized hohlraum platform, as well as a later variant which gives higher hotspot temperature. In both platforms, imposed fields (at the capsule center) of up to 28 T increase the fusion yield and hotspot temperature. Integrated radiation-magneto-hydrodynamic (rad-MHD) modeling with the Lasnex code of these shots is shown, where laser power multipliers and a saturation clamp on cross-beam energy transfer (CBET) are developed to match the time of peak capsule emission and the P2 Legendre moment of the hotspot x-ray image. The resulting fusion yield and ion temperature agree decently with the measured relative effects of the field, although the absolute simulated yields are higher than the data by 2.0-2.7X. The tuned parameters and yield discrepancy are comparable for experiments with and without an imposed field, indicating the model adequately captures the field effects. Self-generated and imposed fields are added sequentially to simulations of one BigFoot NIF shot to understand how they alter target dynamics.

physics.plasm-ph↗

arXiv2023

Resistive Diffusion in Magnetized ICF Implosions: Reduced Magnetic Stabilization of the Richtmyer Meshkov Instability

Resistive diffusion is typically regarded to be negligible in magnetized ICF experiments, with magnetic flux effectively compressed during the implosion. In this work the Richtmyer Meshkov instability at the ice-ablator interface is taken as an example for investigating resistive effects. For a high temperature (approximately 100eV) interface with magnetic field applied perpendicular to shock propagation, perturbation growth is suppressed by magnetic tension. However, for lower temperature interfaces the resistive diffusion prevents substantial magnetic field twisting at small scales. ICF implosion simulations are then used to assess magnetic diffusivity at different interfaces; the ice-ablator interface is found to be too resistive for the magnetic fields to enhance stability. For Rayleigh-Taylor growth at the hot-spot edge, on the other hand, resistivity is estimated to only be a secondary effect, as seen in previous simulation studies.

physics.plasm-ph↗

arXiv2022

Observation of electromagnetic filamentary structures produced by the Weibel instability in laser-driven plasmas

We present experimental observations of electron-scale structures in an expanding high-energy-density (HED) plasma generated with a modest intensity $\sim 2 \times 10^{14}$ W/cm$^2$, $\sim1$ ns laser. The observed structures have wavelengths ($\sim 150-220 μm$) and growth rates ($\sim 0.4-1.0$ ns$^{-1}$) consistent with an electron-driven Weibel instability where the anisotropy in the electron distribution is small, $A\sim 0.002$. This instability is found to be a better match to the observed phenomena than other typical field-generation mechanisms found in HED plasmas, including counter-streaming ion Weibel and magnetothermal instabilities. These observations experimentally demonstrate for the first time that the electron Weibel instability must be considered alongside other magnetic field generation and amplification mechanisms in expanding ablation plasmas, which are ubiquitous in HED research. They also provide physics insight into the generation of magnetic fields in large-scale astrophysical plasmas. Additionally, inspection of the magnetic power spectrum shows a possible scaling match to analytic gyrokinetic predictions, $|B_k|^2\propto k^{-16/3}$, at scales below the electron Larmor radius.

physics.plasm-ph↗

arXiv2021

Magnetized ICF Implosions: Scaling of Temperature and Yield Enhancement

This paper investigates the impact of an applied magnetic field on the yield and hot-spot temperature of inertial confinement fusion implosions. A scaling of temperature amplification due to magnetization is shown to be in agreement with unperturbed 2-D extended-magnetohydrodynamic simulations. A perfectly spherical hot-spot with an axial magnetic field is predicted to have a maximum temperature amplification of 37%. However, elongation of the hot-spot along field lines raises this value by decreasing the hot-spot surface area along magnetic field lines. A scaling for yield amplification predicts that a magnetic field has the greatest benefit for low temperature implosions; this is in agreement with simplified 1-D simulations, but not 2-D simulations where the hot-spot pressure can be significantly reduced by heat-flow anisotropy. Simulations including a P2 drive asymmetry then show that the magnetized yield is a maximum when the capsule drive corrects the hot-spot shape to be round at neutron bang-time. The benefit of an applied field increases when the implosion is more highly perturbed. Increasing the magnetic field strength past the value required to magnetize the electrons is beneficial due to additional suppression of perturbations by magnetic tension.

physics.plasm-ph↗

arXiv2016

Effect of Laser-Plasma Interactions on Inertial Fusion Hydrodynamics

The effects of laser-plasma interactions (LPI) on the dynamics of inertial confinement fusion hohlraums is investigated via a new approach that self-consistently couples reduced LPI models into radiation-hydrodynamics numerical codes. The interplay between hydrodynamics and LPI -- specifically stimulated Raman scatter (SRS) and crossed-beam energy transfer (CBET) -- mostly occurs via momentum and energy deposition into Langmuir and ion acoustic waves. This spatially redistributes energy coupling to the target, which affects the background plasma conditions and thus modifies laser propagation. This model shows reduced CBET, and significant laser energy depletion by Langmuir waves, which reduce the discrepancy between modeling and data from hohlraum experiments on wall x-ray emission and capsule implosion shape.

physics.plasm-ph↗

arXiv2013

Raman backscatter as a remote laser power sensor in high-energy-density plasmas

Stimulated Raman backscatter (SRS) is used as a remote sensor to quantify the instantaneous laser power after transfer from outer to inner cones that cross in a National Ignition Facility (NIF) gas-filled hohlraum plasma. By matching SRS between a shot reducing outer vs a shot reducing inner power we infer that ~half of the incident outer-cone power is transferred to inner cones, for the specific time and wavelength configuration studied. This is the first instantaneous non-disruptive measure of power transfer in an indirect drive NIF experiment using optical measurements.

physics.plasm-ph↗