SearcharxivSearch

arXiv subjects

J. Dinis

Publications and source records attributed to J. Dinis.

At least 19 recordsLinked to original sources

Euclid preparation. Review of forecast constraints on dark energy and modified gravity

The Euclid mission has been designed to provide, as one of its main deliverables, information on the nature of the gravitational interaction, which determines the expansion of the Universe and the formation of structures. Thus, Euclid has the potential to test deviations from general relativity that will allow us to shed light on long-lasting problems in the standard cosmological model, $\Lambda$CDM. Euclid will mainly do this by using two complementary probes: weak gravitational lensing and galaxy clustering. In this paper we review pre-launch Euclid analyses for dark energy and modified gravity. These include forecast constraints with future Euclid data on cosmological parameters for different cosmological models, such as a time-varying dark energy component, phenomenological modifications of the perturbation sector and specific modified gravity models, with further extensions that include neutrino physics and the coupling to the electromagnetic sector through the fine-structure constant. We review the study of the impact of nonlinear clustering methods on beyond-$\Lambda$CDM constraints with Euclid. This is of fundamental importance to efficiently predict the large-scale clustering of matter and dark matter halos, given that we will have access to a wealth of information on scales beyond the linear regime. We inspect the extension of theoretical predictions for observable quantities in alternative cosmologies to $\Lambda$CDM at fully nonlinear scales by means of $N$-body simulations. We discuss the impact of relativistic corrections in extended cosmological models. Overall, this review highlights the significant potential of the Euclid mission to tightly constrain parameters of dark energy and modified gravity models, or perhaps to detect possible signatures of a $\Lambda$CDM failure.

astro-ph.CO

Euclid: Methodology for derivation of IPC-corrected conversion gain of nonlinear CMOS APS

We introduce a fast method to measure the conversion gain in Complementary Metal-Oxide-Semiconductors (CMOS) Active Pixel Sensors (APS), which accounts for nonlinearity and interpixel capacitance (IPC). The standard 'mean-variance' method is biased because it assumes pixel values depend linearly on signal, and existing methods to correct for nonlinearity are still introducing significant biases. While current IPC correction methods are prohibitively slow for a per-pixel application, our new method uses separate measurements of the IPC kernel to make an almost instantaneous calculation of gain. Validated using test data from a flight detector from the ESA Euclid mission, the IPC correction recovers the results of slower methods within 0.1% accuracy. Meanwhile the nonlinearity correction ensures an estimation of the gain that is independent of signal, correcting a bias of more than 2.5% on gain estimation.

physics.ins-det

Euclid preparation. LXXIV. Euclidised observations of Hubble Frontier Fields and CLASH galaxy clusters

We present HST2EUCLID, a novel Python code to generate Euclid realistic mock images in the $H_{\rm E}$, $J_{\rm E}$, $Y_{\rm E}$, and $I_{\rm E}$ photometric bands based on panchromatic Hubble Space Telescope observations. The software was used to create a simulated database of Euclid images for the 27 galaxy clusters observed during the Cluster Lensing And Supernova survey with Hubble (CLASH) and the Hubble Frontier Fields (HFF) program. Since the mock images were generated from real observations, they incorporate, by construction, all the complexity of the observed galaxy clusters. The simulated Euclid data of the galaxy cluster MACS J0416.1$-$2403 were then used to explore the possibility of developing strong lensing models based on the Euclid data. In this context, complementary photometric or spectroscopic follow-up campaigns are required to measure the redshifts of multiple images and cluster member galaxies. By Euclidising six parallel blank fields obtained during the HFF program, we provide an estimate of the number of galaxies detectable in Euclid images per ${\rm deg}^2$ per magnitude bin (number counts) and the distribution of the galaxy sizes. Finally, we present a preview of the Chandra Deep Field South that will be observed during the Euclid Deep Survey and two examples of galaxy-scale strong lensing systems residing in regions of the sky covered by the Euclid Wide Survey. The methodology developed in this work lends itself to several additional applications, as simulated Euclid fields based on HST (or JWST) imaging with extensive spectroscopic information can be used to validate the feasibility of legacy science cases or to train deep learning techniques in advance, thus preparing for a timely exploitation of the Euclid Survey data.

astro-ph.CO

Euclid preparation. Establishing the quality of the 2D reconstruction of the filaments of the cosmic web with DisPerSE using Euclid photometric redshifts

Cosmic filaments are prominent structures of the matter distribution of the Universe. Modern detection algorithms are an efficient way to identify filaments in large-scale observational surveys of galaxies. Many of these methods were originally designed to work with simulations and/or well-sampled spectroscopic surveys. When spectroscopic redshifts are not available, the filaments of the cosmic web can be detected in projection using photometric redshifts in slices along the Line of Sight, which enable the exploration of larger cosmic volumes. However, this comes at the expense of a lower redshift precision. It is therefore crucial to assess the differences between filaments extracted from exact redshifts and from photometric redshifts for a specific survey. We apply this analysis to capture the uncertainties and biases of filament extractions introduced by using the photometric sample of the Euclid Wide Survey. The question that we address in this work is how can we compare two filament samples derived with redshifts of different precisions in the Euclid Wide Survey context. We apply the cosmic web detection algorithm DisPerSE, in the redshift range $0.1 \leq z \leq 0.5$, to the GAlaxy Evolution and Assembly (GAEA) simulated galaxy sample which reproduces several characteristics of the Euclid Wide Survey. We develop a method to compare skeletons derived from photometric redshifts to those derived from true galaxy positions. This method expands the commonly used measure of distance between filaments to include geometrical (angles between filaments) and astrophysical considerations (galaxy mass gradients and connectivity-mass relations). We assess whether this approach strengthens our ability to correctly identify filaments in very large surveys such as the Euclid Wide Survey. [abridged]

astro-ph.CO

Euclid VI. NISP-P optical ghosts

The Near-Infrared Spectrometer and Photometer (NISP) onboard Euclid includes several optical elements in its path, which introduce artefacts into the data from non-nominal light paths. To ensure uncontaminated source photometry, these artefacts must be accurately accounted for. This paper focuses on two specific optical features in NISP's photometric data (NISP-P): ghosts caused by the telescope's dichroic beamsplitter, and the bandpass filters within the NISP fore-optics. Both ghost types exhibit a characteristic morphology and are offset from the originating stars. The offsets are well modelled using 2D polynomials, with only stars brighter than approximately 10 magnitudes in each filter producing significant ghost contributions. The masking radii for these ghosts depend on both the source-star brightness and the filter wavelength, ranging from 20 to 40 pixels. We present the final relations and models used in the near-infrared (NIR) data pipeline to mask these ghosts for Euclid's Quick Data Release (Q1).

astro-ph.IM

Euclid preparation. Estimating galaxy physical properties using CatBoost chained regressors with attention

Euclid will image ~14000 deg^2 of the extragalactic sky at visible and NIR wavelengths, providing a dataset of unprecedented size and richness that will facilitate a multitude of studies into the evolution of galaxies. In the vast majority of cases the main source of information will come from broad-band images and data products thereof. Therefore, there is a pressing need to identify or develop scalable yet reliable methodologies to estimate the redshift and physical properties of galaxies using broad-band photometry from Euclid, optionally including ground-based optical photometry also. To address this need, we present a novel method to estimate the redshift, stellar mass, star-formation rate, specific star-formation rate, E(B-V), and age of galaxies, using mock Euclid and ground-based photometry. The main novelty of our property-estimation pipeline is its use of the CatBoost implementation of gradient-boosted regression-trees, together with chained regression and an intelligent, automatic optimization of the training data. The pipeline also includes a computationally-efficient method to estimate prediction uncertainties, and, in the absence of ground-truth labels, provides accurate predictions for metrics of model performance up to z~2. We apply our pipeline to several datasets consisting of mock Euclid broad-band photometry and mock ground-based ugriz photometry, to evaluate the performance of our methodology for estimating the redshift and physical properties of galaxies detected in the Euclid Wide Survey. The quality of our photometric redshift and physical property estimates are highly competitive overall, validating our modeling approach. We find that the inclusion of ground-based optical photometry significantly improves the quality of the property estimation, highlighting the importance of combining Euclid data with ancillary ground-based optical data. (Abridged)

astro-ph.GA

Euclid preparation LXX. Forecasting detection limits for intracluster light in the Euclid Wide Survey

The intracluster light (ICL) permeating galaxy clusters is a tracer of the cluster's assembly history, and potentially a tracer of their dark matter structure. In this work we explore the capability of the Euclid Wide Survey to detect ICL using H-band mock images. We simulate clusters across a range of redshifts (0.3-1.8) and halo masses ($10^{13.9}$-$10^{15.0}$ M$_\odot$), using an observationally motivated model of the ICL. We identify a 50-200 kpc circular annulus around the brightest cluster galaxy (BCG) in which the signal-to-noise ratio (S/N) of the ICL is maximised and use the S/N within this aperture as our figure of merit for ICL detection. We compare three state-of-the-art methods for ICL detection, and find that a method that performs simple aperture photometry after high-surface brightness source masking is able to detect ICL with minimal bias for clusters more massive than $10^{14.2}$ M$_\odot$. The S/N of the ICL detection is primarily limited by the redshift of the cluster, driven by cosmological dimming, rather than the mass of the cluster. Assuming the ICL in each cluster contains 15% of the stellar light, we forecast that Euclid will be able to measure the presence of ICL in up to $\sim80000$ clusters of $>10^{14.2}$ M$_\odot$ between $z=0.3$ and 1.5 with a S/N$>3$. Half of these clusters will reside below $z=0.75$ and the majority of those below $z=0.6$ will be detected with a S/N $>20$. A few thousand clusters at $1.3 10^{14.7}$ M$_\odot$. Euclid will detect the ICL at more than 500 kpc distance from the BCG, up to $z=0.7$, in several hundred of these massive clusters over its large survey volume.

astro-ph.GA

Euclid Quick Data Release (Q1) -- Data release overview

The first Euclid Quick Data Release, Q1, comprises 63.1 sq deg of the Euclid Deep Fields (EDFs) to nominal wide-survey depth. It encompasses visible and near-infrared space-based imaging and spectroscopic data, ground-based photometry in the u, g, r, i and z bands, as well as corresponding masks. Overall, Q1 contains about 30 million objects in three areas near the ecliptic poles around the EDF-North and EDF-South, as well as the EDF-Fornax field in the constellation of the same name. The purpose of this data release -- and its associated technical papers -- is twofold. First, it is meant to inform the community of the enormous potential of the Euclid survey data, to describe what is contained in these data, and to help prepare expectations for the forthcoming first major data release DR1. Second, it enables a wide range of initial scientific projects with wide-survey Euclid data, ranging from the early Universe to the Solar System. The Q1 data were processed with early versions of the processing pipelines, which already demonstrate good performance, with numerous improvements in implementation compared to pre-launch development. In this paper, we describe the sky areas released in Q1, the observations, a top-level view of the data processing of Euclid and associated external data, the Q1 photometric masks, and how to access the data. We also give an overview of initial scientific results obtained using the Q1 data set by Euclid Consortium scientists, and conclude with important caveats when using the data. As a complementary product, Q1 also contains observations of a star-forming area in Lynd's Dark Nebula 1641 in the Orion~A Cloud, observed for technical purposes during Euclid's performance-verification phase. This is a unique target, of a type not commonly found in Euclid's nominal sky survey.

astro-ph.GA

Euclid Quick Data Release (Q1): VIS processing and data products

This paper describes the VIS Processing Function (VIS PF) of the Euclid ground segment pipeline, which processes and calibrates raw data from the VIS camera. We present the algorithms used in each processing element, along with a description of the on-orbit performance of VIS PF, based on Performance Verification (PV) and Q1 data. We demonstrate that the principal performance metrics (image quality, astrometric accuracy, photometric calibration) are within pre-launch specifications. The image-to-image photometric scatter is less than $0.8\%$, and absolute astrometric accuracy compared to Gaia is $5$ mas Image quality is stable over all Q1 images with a full width at half maximum (FWHM) of $0.\!^{\prime\prime}16$. The stacked images (combining four nominal and two short exposures) reach $I_\mathrm{E} = 25.6$ ($10\sigma$, measured as the variance of $1.\!^{\prime\prime}3$ diameter apertures). We also describe quality control metrics provided with each image, and an appendix provides a detailed description of the provided data products. The excellent quality of these images demonstrates the immense potential of Euclid VIS data for weak lensing. VIS data, covering most of the extragalactic sky, will provide a lasting high-resolution atlas of the Universe.

astro-ph.IM

Euclid Quick Data Release (Q1) Exploring galaxy properties with a multi-modal foundation model

Modern astronomical surveys, such as the Euclid mission, produce high-dimensional, multi-modal data sets that include imaging and spectroscopic information for millions of galaxies. These data serve as an ideal benchmark for large, pre-trained multi-modal models, which can leverage vast amounts of unlabelled data. In this work, we present the first exploration of Euclid data with AstroPT, an autoregressive multi-modal foundation model trained on approximately 300 000 optical and infrared Euclid images and spectral energy distributions (SEDs) from the first Euclid Quick Data Release. We compare self-supervised pre-training with baseline fully supervised training across several tasks: galaxy morphology classification; redshift estimation; similarity searches; and outlier detection. Our results show that: (a) AstroPT embeddings are highly informative, correlating with morphology and effectively isolating outliers; (b) including infrared data helps to isolate stars, but degrades the identification of edge-on galaxies, which are better captured by optical images; (c) simple fine-tuning of these embeddings for photometric redshift and stellar mass estimation outperforms a fully supervised approach, even when using only 1% of the training labels; and (d) incorporating SED data into AstroPT via a straightforward multi-modal token-chaining method improves photo-z predictions, and allow us to identify potentially more interesting anomalies (such as ringed or interacting galaxies) compared to a model pre-trained solely on imaging data.

astro-ph.GA

Euclid preparation. Spatially resolved stellar populations of local galaxies with Euclid: a proof of concept using synthetic images with the TNG50 simulation

The European Space Agency's Euclid mission will observe approximately 14,000 $\rm{deg}^{2}$ of the extragalactic sky and deliver high-quality imaging for many galaxies. The depth and high spatial resolution of the data will enable a detailed analysis of stellar population properties of local galaxies. In this study, we test our pipeline for spatially resolved SED fitting using synthetic images of Euclid, LSST, and GALEX generated from the TNG50 simulation. We apply our pipeline to 25 local simulated galaxies to recover their resolved stellar population properties. We produce 3 types of data cubes: GALEX + LSST + Euclid, LSST + Euclid, and Euclid-only. We perform the SED fitting tests with two SPS models in a Bayesian framework. Because the age, metallicity, and dust attenuation estimates are biased when applying only classical formulations of flat priors, we examine the effects of additional priors in the forms of mass-age-$Z$ relations, constructed using a combination of empirical and simulated data. Stellar-mass surface densities can be recovered well using any of the 3 data cubes, regardless of the SPS model and prior variations. The new priors then significantly improve the measurements of mass-weighted age and $Z$ compared to results obtained without priors, but they may play an excessive role compared to the data in determining the outcome when no UV data is available. The spatially resolved SED fitting method is powerful for mapping the stellar populations of galaxies with the current abundance of high-quality imaging data. Our study re-emphasizes the gain added by including multiwavelength data from ancillary surveys and the roles of priors in Bayesian SED fitting. With the Euclid data alone, we will be able to generate complete and deep stellar mass maps of galaxies in the local Universe, thus exploiting the telescope's wide field, NIR sensitivity, and high spatial resolution.

astro-ph.GA

Euclid Quick Data Release (Q1). LEMON -- Lens Modelling with Neural networks. Automated and fast modelling of Euclid gravitational lenses with a singular isothermal ellipsoid mass profile

The Euclid mission aims to survey around 14000 deg^{2} of extragalactic sky, providing around 10^{5} gravitational lens images. Modelling of gravitational lenses is fundamental to estimate the total mass of the lens galaxy, along with its dark matter content. Traditional modelling of gravitational lenses is computationally intensive and requires manual input. In this paper, we use a Bayesian neural network, LEns MOdelling with Neural networks (LEMON), to model Euclid gravitational lenses with a singular isothermal ellipsoid mass profile. Our method estimates key lens mass profile parameters, such as the Einstein radius, while also predicting the light parameters of foreground galaxies and their uncertainties. We validate LEMON's performance on both mock Euclid datasets, real lenses observed with Hubble Space Telescope (HST), and real Euclid lenses, demonstrating the ability of LEMON to predict parameters of both simulated and real lenses. Results show promising accuracy and reliability in predicting the Einstein radius, mass and light ellipticities, effective radius, S\'ersic index, lens magnitude, and unlensed source position for simulated lens galaxies. The application to real data, including the latest Quick Release 1 strong lens candidates, provides encouraging results in the recovery of the parameters for real lenses. We also verified that LEMON has the potential to accelerate traditional modelling methods, by giving to the classical optimiser the LEMON predictions as starting points, resulting in a speed-up of up to 26 times the original time needed to model a sample of gravitational lenses, a result that would be impossible with randomly initialised guesses. This work represents a significant step towards efficient, automated gravitational lens modelling, which is crucial for handling the large data volumes expected from Euclid.

astro-ph.CO

Euclid: Early Release Observations -- The Intracluster Light of Abell 2390

Intracluster light (ICL) provides a record of the dynamical interactions undergone by clusters, giving clues on cluster formation and evolution. Here, we analyse the properties of ICL in the massive cluster Abell 2390 at redshift z=0.228. Our analysis is based on the deep images obtained by the Euclid mission as part of the Early Release Observations in the near-infrared (Y, J, H bands), using the NISP instrument in a 0.75 deg$^2$ field. We subtracted a point--spread function (PSF) model and removed the Galactic cirrus contribution in each band after modelling it with the DAWIS software. We then applied three methods to detect, characterise, and model the ICL and the brightest cluster galaxy (BCG): the CICLE 2D multi-galaxy fitting; the DAWIS wavelet-based multiscale software; and a mask-based 1D profile fitting. We detect ICL out to 600 kpc. The ICL fractions derived by our three methods range between 18% and 36% (average of 24%), while the BCG+ICL fractions are between 21% and 41% (average of 29%), depending on the band and method. A galaxy density map based on 219 selected cluster members shows a strong cluster substructure to the south-east and a smaller feature to the north-west. Based on colours, the ICL (out to about 400 kpc) seems to be built by the accretion of small systems (M ~ $10^{9.5}$ solar mass), or from stars coming from the outskirts of Milky Way-type galaxies (M ~ $10^{10}$ solar mass). Though Abell 2390 does not seem to be undergoing a merger, it is not yet fully relaxed, since it has accreted two groups that have not fully merged with the cluster core. We estimate that the contributions to the inner 300 kpc of the ICL of the north-west and south-east subgroups are 21% and 9% respectively.

astro-ph.GA

Euclid: Galaxy morphology and photometry from bulge-disc decomposition of Early Release Observations

The background galaxies in Euclid ERO images of the Perseus cluster make up a remarkable sample in its combination of 0.57 deg$^2$ area, 25.3 and 23.2 AB mag depth, as well as 0.1" and 0.3" angular resolutions, in optical and near-IR bands, respectively. We perform a morphological analysis of 2445 and 12,786 galaxies with $I_E < 21$ and $I_E < 23$, respectively. We use single-S\'ersic profiles and the sums of a S\'ersic bulge and an exponential disc to model these galaxies with SourceXtractor++ and analyse their parameters in order to assess their consistencies and discrepancies. The fitted galaxies to $I_E < 21$ span the various Hubble types with ubiquitous bulge and disc components, and a bulge-to-total light ratio B/T taking all values from 0 to 1. The effective radius of the single-S\'ersic profile is an intermediate estimate of galaxy size, between the bulge and disc effective radii, depending on B/T. The axis ratio of the single-S\'ersic profile is higher than the disc axis ratio, increasingly so with B/T. The model impacts the photometry with -0.08 to 0.01 mag median systematic $I_E$ offsets between single-S\'ersic and bulge+disc total magnitudes, and a 0.05 to 0.15 mag dispersion, from low to high B/T. We measure a median $0.3$ mag bulge-disc colour difference in rest-frame $M_g - M_i$ that originates from the disc-dominated galaxies, whereas bulge-dominated galaxies have similar median colours for their components. We also measure redder-inside disc colour gradients based on 5 to 10$\%$ systematic variations of disc effective radii between the optical and near-IR bands. This analysis demonstrates the usefulness and limitations of single-S\'ersic profile modelling and the power of bulge-disc decomposition for characterising the morphology of lenticulars and spirals in Euclid images. We make available the catalogues of best-fit parameters for the morphological and SED fits.

astro-ph.GA

Euclid: Finding strong gravitational lenses in the Early Release Observations using convolutional neural networks

The Early Release Observations (ERO) from Euclid have detected several new galaxy-galaxy strong gravitational lenses, with the all-sky survey expected to find 170,000 new systems, greatly enhancing studies of dark matter, dark energy, and constraints on the cosmological parameters. As a first step, visual inspection of all galaxies in one of the ERO fields (Perseus) was carried out to identify candidate strong lensing systems and compared to the predictions from Convolutional Neural Networks (CNNs). However, the entire ERO data set is too large for expert visual inspection. In this paper, we therefore extend the CNN analysis to the whole ERO data set, using different CNN architectures and methodologies. Using five CNN architectures, we identified 8,469 strong gravitational lens candidates from IE-band cutouts of 13 Euclid ERO fields, narrowing them to 97 through visual inspection, including 14 grade A and 31 grade B candidates. We present the spectroscopic confirmation of a strong gravitational lensing candidate, EUCLJ081705.61+702348.8. The foreground lensing galaxy, an early-type system at redshift z = 0.335, and the background source, a star-forming galaxy at redshift z = 1.475 with [O II] emission, are both identified. Lens modeling using the Euclid strong lens modeling pipeline reveals two distinct arcs in a lensing configuration, with an Einstein radius of 1.18 \pm 0.03 arcseconds, confirming the lensing nature of the system. These findings highlight the importance of a broad CNN search to efficiently reduce candidates, followed by visual inspection to eliminate false positives and achieve a high-purity sample of strong lenses in Euclid.

astro-ph.GA

Euclid: A complete Einstein ring in NGC 6505

We report the discovery of a complete Einstein ring around the elliptical galaxy NGC 6505, at $z=0.042$. This is the first strong gravitational lens discovered in Euclid and the first in an NGC object from any survey. The combination of the low redshift of the lens galaxy, the brightness of the source galaxy ($I_\mathrm{E}=18.1$ lensed, $I_\mathrm{E}=21.3$ unlensed), and the completeness of the ring make this an exceptionally rare strong lens, unidentified until its observation by Euclid. We present deep imaging data of the lens from the Euclid Visible Camera (VIS) and Near-Infrared Spectrometer and Photometer (NISP) instruments, as well as resolved spectroscopy from the Keck Cosmic Web Imager (KCWI). The Euclid imaging in particular presents one of the highest signal-to-noise ratio optical/near-infrared observations of a strong gravitational lens to date. From the KCWI data we measure a source redshift of $z=0.406$. Using data from the Dark Energy Spectroscopic Instrument (DESI) we measure a velocity dispersion for the lens galaxy of $\sigma_\star=303\pm15\,\mathrm{kms}^{-1}$. We model the lens galaxy light in detail, revealing angular structure that varies inside the Einstein ring. After subtracting this light model from the VIS observation, we model the strongly lensed images, finding an Einstein radius of 2.5 arcsec, corresponding to $2.1\,\mathrm{kpc}$ at the redshift of the lens. This is small compared to the effective radius of the galaxy, $R_\mathrm{eff}\sim 12.3\,\mathrm{arcsec}$. Combining the strong lensing measurements with analysis of the spectroscopic data we estimate a dark matter fraction inside the Einstein radius of $f_\mathrm{DM} = (11.1_{-3.5}^{+5.4})\%$ and a stellar initial mass-function (IMF) mismatch parameter of $\alpha_\mathrm{IMF} = 1.26_{-0.08}^{+0.05}$, indicating a heavier-than-Chabrier IMF in the centre of the galaxy.

astro-ph.GA

Euclid preparation. 3-dimensional galaxy clustering in configuration space. Part I. 2-point correlation function estimation

The 2-point correlation function of the galaxy spatial distribution is a major cosmological observable that enables constraints on the dynamics and geometry of the Universe. The Euclid mission aims at performing an extensive spectroscopic survey of approximately 20--30 million H$\alpha$-emitting galaxies up to about redshift two. This ambitious project seeks to elucidate the nature of dark energy by mapping the 3-dimensional clustering of galaxies over a significant portion of the sky. This paper presents the methodology and software developed for estimating the 3-dimensional 2-point correlation function within the Euclid Science Ground Segment. The software is designed to overcome the significant challenges posed by the large and complex Euclid data set, which involves millions of galaxies. Key challenges include efficient pair counting, managing computational resources, and ensuring the accuracy of the correlation function estimation. The software leverages advanced algorithms, including kd-tree, octree, and linked-list data partitioning strategies, to optimise the pair-counting process. The implementation also includes parallel processing capabilities using shared-memory open multi-processing to further enhance performance and reduce computation times. Extensive validation and performance testing of the software are presented. The results indicate that the software is robust and can reliably estimate the 2-point correlation function, which is essential for deriving cosmological parameters with high precision. Furthermore, the paper discusses the expected performance of the software during different stages of the Euclid Wide Survey observations and forecasts how the precision of the correlation function measurements will improve over the mission's timeline, highlighting the software's capability to handle large data sets efficiently.

astro-ph.CO

Euclid preparation. LXVIII. Extracting physical parameters from galaxies with machine learning

The Euclid mission is generating a vast amount of imaging data in four broadband filters at high angular resolution. This will allow the detailed study of mass, metallicity, and stellar populations across galaxies, which will constrain their formation and evolutionary pathways. Transforming the Euclid imaging for large samples of galaxies into maps of physical parameters in an efficient and reliable manner is an outstanding challenge. We investigate the power and reliability of machine learning techniques to extract the distribution of physical parameters within well-resolved galaxies. We focus on estimating stellar mass surface density, mass-averaged stellar metallicity and age. We generate noise-free, synthetic high-resolution imaging data in the Euclid photometric bands for a set of 1154 galaxies from the TNG50 cosmological simulation. The images are generated with the SKIRT radiative transfer code, taking into account the complex 3D distribution of stellar populations and interstellar dust attenuation. We use a machine learning framework to map the idealised mock observational data to the physical parameters on a pixel-by-pixel basis. We find that stellar mass surface density can be accurately recovered with a $\leq 0.130 {\rm \,dex}$ scatter. Conversely, stellar metallicity and age estimates are, as expected, less robust, but still contain significant information which originates from underlying correlations at a sub-kpc scale between stellar mass surface density and stellar population properties.

astro-ph.GA