Searcharxiv⌕ Search

arXiv subjects

J. E. Campagne

Publications and source records attributed to J. E. Campagne.

11 recordsLinked to original sources

The N5K Challenge: Non-Limber Integration for LSST Cosmology

The rapidly increasing statistical power of cosmological imaging surveys requires us to reassess the regime of validity for various approximations that accelerate the calculation of relevant theoretical predictions. In this paper, we present the results of the 'N5K non-Limber integration challenge', the goal of which was to quantify the performance of different approaches to calculating the angular power spectrum of galaxy number counts and cosmic shear data without invoking the so-called 'Limber approximation', in the context of the Rubin Observatory Legacy Survey of Space and Time (LSST). We quantify the performance, in terms of accuracy and speed, of three non-Limber implementations: ${\tt FKEM (CosmoLike)}$, ${\tt Levin}$, and ${\tt matter}$, themselves based on different integration schemes and approximations. We find that in the challenge's fiducial 3x2pt LSST Year 10 scenario, ${\tt FKEM (CosmoLike)}$ produces the fastest run time within the required accuracy by a considerable margin, positioning it favourably for use in Bayesian parameter inference. This method, however, requires further development and testing to extend its use to certain analysis scenarios, particularly those involving a scale-dependent growth rate. For this and other reasons discussed herein, alternative approaches such as ${\tt matter}$ and ${\tt Levin}$ may be necessary for a full exploration of parameter space. We also find that the usual first-order Limber approximation is insufficiently accurate for LSST Year 10 3x2pt analysis on $\ell=200-1000$, whereas invoking the second-order Limber approximation on these scales (with a full non-Limber method at smaller $\ell$) does suffice.

astro-ph.CO↗

Scaling pair count to next galaxy surveys

Counting pairs of galaxies or stars according to their distance is at the core of real-space correlation analyzes performed in astrophysics and cosmology. Upcoming galaxy surveys (LSST, Euclid) will measure properties of billions of galaxies challenging our ability to perform such counting in a minute-scale time relevant for the usage of simulations. The problem is only limited by efficient access to the data, hence belongs to the big data category. We use the popular Apache Spark framework to address it and design an efficient high-throughput algorithm to deal with hundreds of millions to billions of input data. To optimize it, we revisit the question of nonhierarchical sphere pixelization based on cube symmetries and develop a new one dubbed the "Similar Radius Sphere Pixelization" (SARSPix) with very close to square pixels. It provides the most adapted indexing over the sphere for all distance-related computations. Using LSST-like fast simulations, we compute autocorrelation functions on tomographic bins containing between a hundred million to one billion data points. In each case we achieve the construction of a standard pair-distance histogram in about 2 minutes, using a simple algorithm that is shown to scale, over a moderate number of nodes (16 to 64). This illustrates the potential of this new techniques in the field of astronomy where data access is becoming the main bottleneck. They can be easily adapted to other use-cases as nearest-neighbors search, catalog cross-match or cluster finding. The software is publicly available from https://github.com/astrolabsoftware/SparkCorr.

astro-ph.IM↗

Analyzing billion-objects catalog interactively: Apache Spark for physicists

Apache Spark is a Big Data framework for working on large distributed datasets. Although widely used in the industry, it remains rather limited in the academic community or often restricted to software engineers. The goal of this paper is to show with practical uses-cases that the technology is mature enough to be used without excessive programming skills by astronomers or cosmologists in order to perform standard analyses over large datasets, as those originating from future galaxy surveys. To demonstrate it, we start from a realistic simulation corresponding to 10 years of LSST data taking (6 billions of galaxies). Then, we design, optimize and benchmark a set of Spark python algorithms in order to perform standard operations as adding photometric redshift errors, measuring the selection function or computing power spectra over tomographic bins. Most of the commands execute on the full 110 GB dataset within tens of seconds and can therefore be performed interactively in order to design full-scale cosmological analyses. A jupyter notebook summarizing the analysis is available at https://github.com/astrolabsoftware/1807.03078.

astro-ph.IM↗

21 cm observation of LSS at z~1 Instrument sensitivity and foreground subtraction

Large Scale Structures (LSS) in the universe can be traced using the neutral atomic hydrogen HI through its 21cm emission. Such a 3D matter distribution map can be used to test the Cosmological model and to constrain the Dark Energy properties or its equation of state. A novel approach, called intensity mapping can be used to map the HI distribution, using radio interferometers with large instantaneous field of view and waveband. In this paper, we study the sensitivity of different radio interferometer configurations, or multi-beam instruments for the observation of large scale structures and BAO oscillations in 21cm and we discuss the problem of foreground removal. For each configuration, we determine instrument response by computing the (u,v) or Fourier angular frequency plane coverage using visibilities. The (u,v) plane response is the noise power spectrum, hence the instrument sensitivity for LSS P(k) measurement. We describe also a simple foreground subtraction method to separate LSS 21 cm signal from the foreground due to the galactic synchrotron and radio sources emission. We have computed the noise power spectrum for different instrument configuration as well as the extracted LSS power spectrum, after separation of 21cm-LSS signal from the foregrounds. We have also obtained the uncertainties on the Dark Energy parameters for an optimized 21 cm BAO survey. We show that a radio instrument with few hundred simultaneous beams and a collecting area of ~10000 m^2 will be able to detect BAO signal at redshift z ~ 1 and will be competitive with optical surveys.

astro-ph.CO↗

BAORadio : Cartographie 3D de la distribution de gaz H$_I$ dans l'Univers

3D mapping of matter distribution in the universe through the 21 cm radio emission of atomic hydrogen is a complementary approach to optical surveys for the study of the Large Scale Structures, in particular for measuring the BAO (Baryon Acoustic Oscillation) scale up to redshifts z <~ 3 and constrain dark energy. We propose to carry such a survey through a novel method, called intensity mapping, without detecting individual galaxies radio emission. This method requires a wide band instrument, 100 MHz or larger, and multiple beams, while a rather modest angular resolution of 10 arcmin would be sufficient. The instrument would have a few thousand square meters of collecting area and few hundreds of simultaneous beams. These constraints could be fulfilled with a dense array of receivers in interferometric mode, or a phased array at the focal plane of a large antenna.

astro-ph.IM↗

PARISROC, a Photomultiplier Array Integrated Readout Chip

PARISROC is a complete read out chip, in AMS SiGe 0.35 micron technology [1], for photomultipliers array. It allows triggerless acquisition for next generation neutrino experiments and it belongs to an R&D program funded by the French national agency for research (ANR) called PMm2: Innovative electronics for photodetectors array used in High Energy Physics and Astroparticles [2] (ref.ANR-06-BLAN- 0186). The ASIC integrates 16 independent and auto triggered channels with variable gain and provides charge and time measurement by a Wilkinson ADC and a 24-bit Counter. The charge measurement should be performed from 1 up to 300 photo-electrons (p.e.) with a good linearity. The time measurement allowed to a coarse time with a 24-bit counter at 10 MHz and a fine time on a 100ns ramp to achieve a resolution of 1 ns. The ASIC sends out only the relevant data through network cables to the central data storage. This paper describes the front-end electronics ASIC called PARISROC.

physics.ins-det↗

The LAGUNA design study- towards giant liquid based underground detectors for neutrino physics and astrophysics and proton decay searches

The feasibility of a next generation neutrino observatory in Europe is being considered within the LAGUNA design study. To accommodate giant neutrino detectors and shield them from cosmic rays, a new very large underground infrastructure is required. Seven potential candidate sites in different parts of Europe and at several distances from CERN are being studied: Boulby (UK), Canfranc (Spain), Fréjus (France/Italy), Pyhäsalmi (Finland), Polkowice-Sieroszowice (Poland), Slanic (Romania) and Umbria (Italy). The design study aims at the comprehensive and coordinated technical assessment of each site, at a coherent cost estimation, and at a prioritization of the sites within the summer 2010.

physics.ins-det↗

PARISROC, a Photomultiplier Array Integrated Read Out Chip

PARISROC is a complete read out chip, in AMS SiGe 0.35 !m technology, for photomultipliers array. It allows triggerless acquisition for next generation neutrino experiments and it belongs to an R&D program funded by the French national agency for research (ANR) called PMm2: ?Innovative electronics for photodetectors array used in High Energy Physics and Astroparticles? (ref.ANR-06-BLAN-0186). The ASIC (Application Specific Integrated Circuit) integrates 16 independent and auto triggered channels with variable gain and provides charge and time measurement by a Wilkinson ADC (Analog to Digital Converter) and a 24-bit Counter. The charge measurement should be performed from 1 up to 300 photo- electrons (p.e.) with a good linearity. The time measurement allowed to a coarse time with a 24-bit counter at 10 MHz and a fine time on a 100ns ramp to achieve a resolution of 1 ns. The ASIC sends out only the relevant data through network cables to the central data storage. This paper describes the front-end electronics ASIC called PARISROC.

physics.ins-det↗

Detectors and flux instrumentation for future neutrino facilities

This report summarises the conclusions from the detector group of the International Scoping Study of a future Neutrino Factory and Super-Beam neutrino facility. The baseline detector options for each possible neutrino beam are defined as follows: 1. A very massive (Megaton) water Cherenkov detector is the baseline option for a sub-GeV Beta Beam and Super Beam facility. 2. There are a number of possibilities for either a Beta Beam or Super Beam (SB) medium energy facility between 1-5 GeV. These include a totally active scintillating detector (TASD), a liquid argon TPC or a water Cherenkov detector. 3. A 100 kton magnetized iron neutrino detector (MIND) is the baseline to detect the wrong sign muon final states (golden channel) at a high energy (20-50 GeV) neutrino factory from muon decay. A 10 kton hybrid neutrino magnetic emulsion cloud chamber detector for wrong sign tau detection (silver channel) is a possible complement to MIND, if one needs to resolve degeneracies that appear in the $δ$-$θ_{13}$ parameter space.

physics.ins-det↗

Physics potential of the CERN-MEMPHYS neutrino oscillation project

We consider the physics potential of CERN based neutrino oscillation experiments consisting of a Beta Beam (BB) and a Super Beam (SPL) sending neutrinos to MEMPHYS, a 440 kt water Čerenkov detector at Frejus, at a distance of 130 km from CERN. The $θ_{13}$ discovery reach and the sensitivity to CP violation are investigated, including a detailed discussion of parameter degeneracies and systematical errors. For SPL sensitivities similar to the ones of the phase II of the T2K experiment (T2HK) are obtained, whereas the BB may reach significantly better sensitivities, depending on the achieved number of total ion decays. The results for the CERN-MEMPHYS experiments are less affected by systematical uncertainties than T2HK. We point out that by a combination of data from BB and SPL a measurement with antineutrinos is not necessary and hence the same physics results can be obtained within about half of the measurement time compared to one single experiment. Furthermore, it is shown how including data from atmospheric neutrinos in the MEMPHYS detector allows to resolve parameter degeneracies and, in particular, provides sensitivity to the neutrino mass hierarchy and the octant of $θ_{23}$.

hep-ph↗

Opera-CNGS/Fréjus-SPL

The poster presented the OPERA experiment and the SPL-Fréjus neutrino super beam project. OPERA (1) is an experiment willing to see tau neutrino appearance. The detector is described in section 2 and the expected results are given. Section 3 is devoted to the SPL neutrino super beam (2), which search for $θ\_{13}$. An optimisation of the SPL energy is proposed.

hep-ex↗