arXiv subjects

J. Fresnais

Publications and source records attributed to J. Fresnais.

12 recordsLinked to original sources

arXiv2014

Evidence of a two-step process and pathway dependency in the thermodynamics of poly(diallyldimethylammonium chloride)/poly(sodium acrylate) complexation

Recent studies have pointed the importance of polyelectrolyte assembly in the elaboration of innovative nanomaterials. Beyond their structures, many important questions on the thermodynamics of association remain to be answered. Here, we investigate the complexation between poly(diallyldimethylammonium chloride) (PDADMAC) and poly(sodium acrylate) (PANa) chains using a combination of three techniques: isothermal titration calorimetry (ITC), static and dynamic light scattering and electrophoresis. Upon addition of PDADMAC to PANa or vice-versa, the results obtained by the different techniques agree well with each other, and reveal a two-step process. The primary process is the formation of highly charged polyelectrolyte complexes of sizes 100 nm. The secondary process is the transition towards a coacervate phase made of rich and poor polymer droplets. The binding isotherms measured are accounted for using a phenomenological model that provides the thermodynamic parameters for each reaction. Small positive enthalpies and large positive entropies consistent with a counterion release scenario are found throughout this study. Beyond, this work stresses the importance of the underestimated formulation pathway or mixing order in polyelectrolyte complexation.

cond-mat.mtrl-sci↗

arXiv2013

Universal Scaling Law to Predict the Efficiency of Magnetic Nanoparticles as MRI T2-Contrast Agents

Magnetic particles are very efficient Magnetic Resonance Imaging (MRI) contrast agents. In the recent years, chemists have unleashed their imagination to design multi-functional nanoprobes for biomedical applications including MRI contrast enhancement. This study is focused on the direct relationship between the size and magnetization of the particles and their nuclear magnetic resonance relaxation properties, which condition their efficiency. Experimental relaxation results with maghemite particles exhibiting a wide range of sizes and magnetizations are compared to previously published data and to well-established relaxation theories with a good agreement. This allows deriving the experimental master curve of the transverse relaxivity versus particle size and to predict the MRI contrast efficiency of any type of magnetic nanoparticles. This prediction only requires the knowledge of the size of the particles impermeable to water protons and the saturation magnetization of the corresponding volume. To predict the T2 relaxation efficiency of magnetic single crystals, the crystal size and magnetization obtained through a single Langevin fit of a magnetization curve is the only information needed. For contrast agents made of several magnetic cores assembled into various geometries (dilute fractal aggregates, dense spherical clusters, core-shell micelles, hollow vesicles), one needs to know a third parameter, namely the intra-aggregate volume fraction occupied by the magnetic materials relatively to the whole (hydrodynamic) sphere. Finally a calculation of the maximum achievable relaxation effect and the size needed to reach this maximum is performed for different cases: maghemite single crystals and dense clusters, core-shell particles (oxide layer around a metallic core) and zinc manganese ferrite crystals.

cond-mat.mtrl-sci↗

arXiv2013

Interfacial activity of phosphonated-polyethylene glycol functionalized cerium oxide nanoparticles

In a recent publication, we have highlighted the potential of phosphonic acid terminated PEG oligomers to functionalize strong UV absorption cerium oxide nanoparticles[1], which yield suspensions that are stable in aqueous or organic solvents and are redispersible in different solvent after freeze-drying. In the present work, we highlight the interfacial activity of the functional ceria nanoparticles and their potential to modify hydrophobic surfaces. We first investigated Phosphonated-PEG amphiphilic oligomers behavior as strong surface active species forming irreversibly adsorbed layers. We then show that the oligomers interfacial properties translate to the functional nanoparticles. In particular, the addition of a small fraction of phosphonated-PEG oligomers with an extra C16 aliphatic chain (stickers) into the formulation enabled the tuning of i) the nanoparticles adsorption at the air/water, polystyrene/water, oil/water interfaces and ii) the particle/particle interaction in aqueous solutions. We also found that dense and closely packed two dimensional monolayers of nanoceria can be formed by spontaneous adsorption or surface compression using a Langmuir trough. A hexagonal organization controlled by reversible and repulsive repulsion has been characterized by GISAXS. Mono- or multilayers can also be stably formed or transferred on solid surfaces. Our results are key features in the field of polymer surface modification, solid stabilized emulsions (Pickering) or supracolloidal assemblies.

cond-mat.mtrl-sci↗

arXiv2012

Poly(acrylic acid)-coated iron oxide nanoparticles : quantitative evaluation of the coating properties and applications for the removal of a pollutant dye

In this work, 6 to 12 nm iron oxide nanoparticles were synthesized and coated with poly(acrylic acid) chains of molecular weight 2100 g/mol. Based on a quantitative evaluation of the dispersions, the bare and coated particles were thoroughly characterized. The number densities of polymers adsorbed at the particle surface and of available chargeable groups were found to be 1.9 +/- 0.3 nm-2 and 26 +/- 4 nm-2, respectively. Occurring via a multi-site binding mechanism, the electrostatic coupling leads to a solid and resilient anchoring of the chains. To assess the efficacy of the particles for pollutant remediation, the adsorption isotherm of methylene blue molecules, a model of pollutant, was determined. The excellent agreement between the predicted and measured amounts of adsorbed dyes suggests that most carboxylates participate to the complexation and adsorption mechanisms. An adsorption of 830 mg/g was obtained. This quantity compares well with the highest values available for this dye.

cond-mat.mtrl-sci↗

arXiv2011

Magnetic nanowires generated via the waterborne desalting transition pathway

We report a simple and versatile waterborne synthesis of magnetic nanowires following the innovative concept of electrostatic "desalting transition". Highly persistent superparamagnetic nanowires are generated from the controlled assembly of oppositely charged nanoparticles and commercially available polyelectrolytes. The wires have diameters around 200 nm and lengths comprised between 1 μm and 1/2 mm, with either positive or negative charges on their surface. Beyond, we show that this soft-chemistry assembly approach is a general phenomenon independent of the feature of the macromolecular building blocks, opening significant perspectives for the design of multifunctional materials.

cond-mat.mtrl-sci↗

arXiv2010

Growth mechanism of nanostructured superparamagnetic rods obtained by electrostatic co-assembly

We report on the growth of nanostructured rods fabricated by electrostatic co-assembly between iron oxide nanoparticles and polymers. The nanoparticles put under scrutiny, γ-Fe2O3 or maghemite, have diameter of 6.7 nm and 8.3 nm and narrow polydispersity. The co-assembly is driven by i) the electrostatic interactions between the polymers and the particles, and by ii) the presence of an externally applied magnetic field. The rods are characterized by large anisotropy factors, with diameter 200 nm and length comprised between 1 and 100 μm. In the present work, we provide for the first time the morphology diagram for the rods as a function of ionic strength and concentration. We show the existence of a critical nanoparticle concentration and of a critical ionic strength beyond which the rods do not form. In the intermediate regimes, only tortuous and branched aggregates are detected. At higher concentrations and lower ionic strengths, linear and stiff rods with superparamagnetic properties are produced. Based on these data, a mechanism for the rod formation is proposed. The mechanism proceeds in two steps : the formation and growth of spherical clusters of particles, and the alignment of the clusters induced by the magnetic dipolar interactions. As far as the kinetics of these processes is concerned, the clusters growth and their alignment occur concomitantly, leading to a continuous accretion of particles or small clusters, and a welding of the rodlike structure.

cond-mat.mtrl-sci↗

arXiv2010

Nanoparticle aggregation controlled by desalting kinetics

We report the formation of stable nanoparticle-polymer clusters obtained by electrostatic complexation. The nanoparticles placed under scrutiny are nanoceria (CeO2) coated by short poly(acrylic acid) moieties, whereas the polymers are cationic-neutral block copolymers. The cluster formation was monitored using different formulation pathways, including direct mixing, dialysis, dilution and quenching. In the first process, the hybrids were obtained by mixing stock solutions of polymers and nanoparticles. Dialysis and dilution were based on controlled desalting kinetics according to methods developed in molecular biology. The fourth process consisted in a rapid dilution of the salted dispersions and as such it was regarded as a quench of the cluster kinetics. We have found that one key parameter that controls the kinetics of formation of electrostatic clusters is the rate dIS/dt at which the salt is removed from the solution, where IS denotes the ionic strength. With decreasing IS, the electrostatically screened polymers and nanoparticles system undergo an abrupt transition between an unassociated and a clustered state. By tuning the desalting kinetics, the size of the clusters was varied from 100 nm to over 1 micrometer. At low ionic strength, the clusters were found to be kinetically frozen. It is proposed that the onset of aggregation is driven by the desorption-adsorption transition of the polymers onto the surfaces of the particles.

cond-mat.mtrl-sci↗

arXiv2009

Electrosteric enhanced stability of functional sub-10 nm cerium and iron oxide particles in cell culture medium

Applications of nanoparticles in biology require that the nanoparticles remain stable in solutions containing high concentrations of proteins and salts, as well as in cell culture media. In this work, we developed simple protocols for the coating of sub-10 nm nanoparticles and evaluated the colloidal stability of dispersions in various environments. Ligands (citric acid), oligomers (phosphonate-terminated poly(ethylene oxide)) and polymers (poly(acrylic acid)) were used as nanometer-thick adlayers for cerium (CeO2) and iron (gamma-Fe2O3) oxide nanoparticles. The organic functionalities were adsorbed on the particle surfaces via physical (electrostatic) forces. Stability assays at high ionic strength and in cell culture media were performed by static and dynamic light scattering. Among the three coating examined, we found that only poly(acrylic acid) fully preserved the dispersion stability on the long term (> weeks). The improved stability was explained by the multi-point attachments of the chains onto the particle surface, and by the adlayer-mediated electrosteric interactions. These results suggest that anionically charged polymers represent an effective alternative to conventional coating agents.

cond-mat.soft↗

arXiv2009

Universal scattering behavior of co-assembled nanoparticle-polymer clusters

Water-soluble clusters made from 7 nm inorganic nanoparticles have been investigated by small-angle neutron scattering. The internal structure factor of the clusters was derived and exhibited a universal behavior as evidenced by a correlation hole at intermediate wave-vectors. Reverse Monte-Carlo calculations were performed to adjust the data and provided an accurate description of the clusters in terms of interparticle distance and volume fraction. Additional parameters influencing the microstructure were also investigated, including the nature and thickness of the nanoparticle adlayer.

cond-mat.soft↗

arXiv2009

Electrostatic co-assembly of iron oxide nanoparticles and polymers : towards the generation of highly persistent superparamagnetic nanorods

A paradigm proposed recently by Boal et al. (A.K. Boal et al., Nature 404, 746-748, 2000) deals with the possibility to use inorganic nanoparticles as building blocks for the design and fabrication of colloidal and supracolloidal assemblies. It is anticipated that these constructs could be made of different shapes, patterns and functionalities and could constitute the components of future nanodevices including sensors, actuators or nanocircuits. Here we report a protocol that allowed us to fabricate such nanoparticle aggregates. The building blocks of the constructs were anionically coated iron oxide nanocrytals (superparamagnetic, size 7 nm) and cationic-neutral block copolymers. We have shown that the electrostatic interactions between charged species can be controlled by tuning the ionic strength of the dispersion. Under appropriate conditions, the control of electrostatics resulted in the elaboration of spherical or elongated aggregates at the micrometer length scale. The elongated aggregates were found to be rod-like, with diameters of a few hundred nanometers and lengths between 1 and 50 micrometers. In addition to their remarkable stiffness, the nanostructured rods were found to reorient along with an externally applied magnetic field, in agreement with the laws of superparamagnetism.

cond-mat.soft↗

arXiv2008

Reorientation kinetics of superparamagnetic nanostructured rods

The attractive interactions between oppositely charged species (colloids, macromolecules etc) dispersed in water are strong, and the direct mixing of solutions containing such species generally yields to a precipitation, or to a phase separation. We have recently developed means to control the electrostatically-driven attractions between nanoparticles and polymers in water, and at the same time to preserve the stability of the dispersions. We give here an account of the formation of supracolloidal aggregates obtained by co-assembly of 7 nm particles with copolymers. Nanostructured rods of length comprised between 5 and 50 microns and diameter 500 nm were investigated. By application of a magnetic field, the rods were found to reorient along with the magnetic field lines. The kinetics of reorientation was investigated using step changes of the magnetic field of amplitude 90 degrees. From the various results obtained, among which an exponential decay of the tangent of the angle made between the rod and the field, we concluded that the rods are superparamagnetic.

cond-mat.soft↗

arXiv2008

Redispersible Hybrid Nanopowders: Cerium Oxide Nanoparticle Complexes with Phosphonated-PEG Oligomers

Rare earth cerium oxide (ceria) nanoparticles are stabilized using end-functional phosphonated-PEG oligomers. The complexation process and structure of the resulting hybrid core-shell singlet nanocolloids are described, characterized and modeled using light and neutron scattering data. The adsorption mechanism is non-stoichiometric, yielding the number of adsorbed chains per particle Nads = 270 at saturation. Adsorption isotherms show a high affinity of the phosphonate head for the ceria surface (adsorption energy ~ -16 kT) suggesting an electrostatic driving force for the complexation. The ease, efficiency and integrity of the complexation is highlighted by the formation of nanometric sized cerium oxide particles covered with a well anchored PEG layer, maintaining the characteristics of the original sol. This solvating brush-like layer is sufficient to solubilize the particles and greatly expand the stability range of the original sol up to pH = 9. We underscore two key attributes of the tailored sol: i) strong UV absorption capability after functionalization and ii) ability to re-disperse after freeze-drying as powder in aqueous or organic solvents in varying concentrations as singlet nanocolloids. This robust platform enables translation of intrinsic properties of mineral oxide nanoparticles to critical end use.

cond-mat.soft↗