arXiv subjects

J. Fujii

Publications and source records attributed to J. Fujii.

29 records · Page 2Linked to original sources

arXiv2018

Fermiology and Superconductivity of Topological Surface States in PdTe$_2$

We study the low-energy surface electronic structure of the transition-metal dichalcogenide superconductor PdTe$_2$ by spin- and angle-resolved photoemission, scanning tunneling microscopy, and density-functional theory-based supercell calculations. Comparing PdTe$_2$ with its sister compound PtSe$_2$, we demonstrate how enhanced inter-layer hopping in the Te-based material drives a band inversion within the anti-bonding p-orbital manifold well above the Fermi level. We show how this mediates spin-polarised topological surface states which form rich multi-valley Fermi surfaces with complex spin textures. Scanning tunneling spectroscopy reveals type-II superconductivity at the surface, and moreover shows no evidence for an unconventional component of its superconducting order parameter, despite the presence of topological surface states.

cond-mat.supr-con↗

arXiv2017

A Quasi-one-dimensional Analytic Model of Rotating Detonation Combustors

A quasi-one-dimensional analytic model is proposed for the internal fluid of rotating detonation combustors (RDCs). This model uses the shock-tube model that constrains the flow to have only a longitudinal component, while admitting the propagation of the detonation wave in the azimuthal direction. The proposed model is able to compute the thruster performance and two-dimensional distributions of gas properties. The calculation process of the model excludes iterative calculation or space discretization. The case calculations of the hydrogen-air RDC and the ethylene-oxygen RDC are conducted, and the results calculated by the analytic model are compared with those simulated by computational fluid dynamics (CFD). Good agreement has been observed between the results obtained with the proposed model and CFD, in terms of both of the qualitative and quantitative comparisons. The proposed model is simple and fast, and also maintains the fundamental characteristics of RDCs.

physics.flu-dyn↗

arXiv2017

Maximal Rashba-like spin splitting via kinetic energy-driven inversion symmetry breaking

Engineering and enhancing inversion symmetry breaking in solids is a major goal in condensed matter physics and materials science, as a route to advancing new physics and applications ranging from improved ferroelectrics for memory devices to materials hosting Majorana zero modes for quantum computing. Here, we uncover a new mechanism for realising a much larger energy scale of inversion symmetry breaking at surfaces and interfaces than is typically achieved. The key ingredient is a pronounced asymmetry of surface hopping energies, i.e. a kinetic energy-driven inversion symmetry breaking, whose energy scale is pinned at a significant fraction of the bandwidth. We show, from spin- and angle-resolved photoemission, how this enables surface states of 3d and 4d-based transition-metal oxides to surprisingly develop some of the largest Rashba-like spin splittings that are known. Our findings open new possibilities to produce spin textured states in oxides which exploit the full potential of the bare atomic spin-orbit coupling, raising exciting prospects for oxide spintronics. More generally, the core structural building blocks which enable this are common to numerous materials, providing the prospect of enhanced inversion symmetry breaking at judiciously-chosen surfaces of a plethora of compounds, and suggesting routes to interfacial control of inversion symmetry breaking in designer heterostructures.

cond-mat.str-el↗

arXiv2017

Ferroelectric control of the spin texture in germanium telluride

The electrical manipulation of spins in semiconductors, without magnetic fields or auxiliary ferromagnetic materials, represents the holy grail for spintronics. The use of Rashba effect is very attractive because the k-dependent spin-splitting is originated by an electric field. So far only tiny effects in two-dimensional electron gases (2DEG) have been exploited. Recently, GeTe has been predicted to have bulk bands with giant Rashba-like splitting, originated by the inversion symmetry breaking due to ferroelectric polarization. In this work, we show that GeTe(111) surfaces with inwards or outwards ferroelectric polarizations display opposite sense of circulation of spin in bulk Rashba bands, as seen by spin and angular resolved photoemission experiments. Our results represent the first experimental demonstration of ferroelectric control of the spin texture in a semiconductor, a fundamental milestone towards the exploitation of the non-volatile electrically switchable spin texture of GeTe in spintronic devices.

cond-mat.mtrl-sci↗

arXiv2017

Three-Dimensional Electronic Structure of type-II Weyl Semimetal WTe$_2$

By combining bulk sensitive soft-X-ray angular-resolved photoemission spectroscopy and accurate first-principles calculations we explored the bulk electronic properties of WTe$_2$, a candidate type-II Weyl semimetal featuring a large non-saturating magnetoresistance. Despite the layered geometry suggesting a two-dimensional electronic structure, we find a three-dimensional electronic dispersion. We report an evident band dispersion in the reciprocal direction perpendicular to the layers, implying that electrons can also travel coherently when crossing from one layer to the other. The measured Fermi surface is characterized by two well-separated electron and hole pockets at either side of the $Γ$ point, differently from previous more surface sensitive ARPES experiments that additionally found a significant quasiparticle weight at the zone center. Moreover, we observe a significant sensitivity of the bulk electronic structure of WTe$_2$ around the Fermi level to electronic correlations and renormalizations due to self-energy effects, previously neglected in first-principles descriptions.

cond-mat.mtrl-sci↗

arXiv2016

Observation of the Type-II Weyl Semimetal Phase in MoTe2

Topological Weyl semimetal (TWS), a new state of quantum matter, has sparked enormous research interest recently. Possessing unique Weyl fermions in the bulk and Fermi arcs on the surface, TWSs offer a rare platform for realizing many exotic physical phenomena. TWSs can be classified into type-I that respect Lorentz symmetry and type-II that do not. Here, we directly visualize the electronic structure of MoTe2, a recently proposed type-II TWS. Using angle-resolved photoemission spectroscopy (ARPES), we unravel the unique surface Fermi arcs, in good agreement with our ab-initio calculations. From spin-resolved ARPES measurements, we demonstrate the non-degenerate spin-texture of surface Fermi-arcs, thereby proving their non-trivial topological nature. Our work not only lead to new understandings of the unusual properties discovered in this family of compounds, but also allow for the further exploration of exotic properties and practical applications of type-II TWSs, as well as the interplay between superconductivity (MoTe2 was discovered to be superconducting recently) and their topological order.

cond-mat.mtrl-sci↗

arXiv2013

Electron sampling depth and saturation effects in perovskite films investigated by soft x-ray absorption spectroscopy

Knowledge of the electron sampling depth and related saturation effects is important for quantitative analysis of X-ray absorption spectroscopy data, yet for oxides with the perovskite structure no quantitative values are so far available. Here we study absorption saturation in films of two of the most-studied perovskites, LCMO and YBCO, at the L2,3 edge of Mn and Cu, respectively. By measuring the electron-yield intensity as a function of photon incidence angle and film thickness, the sampling depth d, photon attenuation length, lambda, and the ratio lambda/d have been independently determined between 50 and 300 K. The extracted sampling depth dLCMO=3 nm for LCMO at high temperatures in its polaronic insulator state (150-300K) is not much larger than values reported for pure transition metals (d Co or Ni=2-2.5nm) at room temperature, but it is smaller than dYBCO=3.9 nm for metallic YBCO that is in turn smaller than the value reported for Fe3O4 (d=4.5 nm) The measured dLCMO increases to 4.5 nm when LCMO is in the metallic state at low temperatures. These results indicate that a universal rule of thumb for the sampling depth in oxides cannot be assumed, and that it can be measurably influenced by electronic phase transitions that derive from strong correlations.

cond-mat.mtrl-sci↗

arXiv2013

Identifying the electronic character and role of the Mn states in the valence band of (Ga,Mn)As

We report high-resolution hard x-ray photoemission spectroscopy results on (Ga,Mn)As films as a function of Mn doping. Supported by theoretical calculations we identify, over the entire 1% to 13% Mn doping range, the electronic character of the states near the top of the valence band. Magnetization and temperature dependent core-level photoemission spectra reveal how the delocalized character of the Mn states enables the bulk ferromagnetic properties of (Ga,Mn)As.

cond-mat.str-el↗

arXiv2011

Graphene on Ir(111) characterized by angle-resolved photoemission

Angle resolved photoelectron spectroscopy (ARPES) is extensively used to characterize the dependence of the electronic structure of graphene on Ir(111) on the preparation process. ARPES findings reveal that temperature programmed growth alone or in combination with chemical vapor deposition leads to graphene displaying sharp electronic bands. The photoemission intensity of the Dirac cone is monitored as a function of the increasing graphene area. Electronic features of the moiré superstructure present in the system, namely minigaps and replica bands are examined and used as robust features to evaluate graphene uniformity. The overall dispersion of the pi-band is analyzed. Finally, by the variation of photon energy, relative changes of the pi- and sigma-band intensities are demonstrated.

cond-mat.mtrl-sci↗

arXiv2010

YBa$_2$Cu$_3$O$_7$/La$_{0.7}$Ca$_{0.3}$MnO$_3$ bilayers: Interface coupling and electric transport properties

Heteroepitaxially grown bilayers of ferromagnetic La$_{0.7}$Ca$_{0.3}$MnO$_3$ (LCMO) on top of superconducting YBa$_2$Cu$_3$O$_7$ (YBCO) thin films were investigated by focusing on electric transport properties as well as on magnetism and orbital occupation at the interface. Transport measurements on YBCO single layers and on YBCO/LCMO bilayers, with different YBCO thickness $d_Y$ and constant LCMO thickness $d_L=50$\,nm, show a significant reduction of the superconducting transition temperature $T_c$ only for $d_Y<10$\,nm,with only a slightly stronger $T_c$ suppression in the bilayers, as compared to the single layers. X-ray magnetic circular dichroism (XMCD) measurements confirm recently published data of an induced magnetic moment on the interfacial Cu by the ferromagnetically ordered Mn ions, with antiparallel alignment between Cu and Mn moments. However, we observe a significantely larger Cu moment than previously reported, indicating stronger coupling between Cu and Mn at the interface. This in turn could result in an interface with lower transparency, and hence smaller spin diffusion length, that would explain our electric transport data, i.e.smaller $T_c$ suppression. Moreover, linear dichroism measurements did not show any evidence for orbital reconstruction at the interface, indicating that a large change in orbital occupancies through hybridization is not necessary to induce a measurable ferromagnetic moment on the Cu atoms.

cond-mat.supr-con↗

arXiv2005

Measurement of spin waves and activation volumes in superparamagnetic Fe films on GaAs(100)

Spin wave frequencies are observed in ultra-thin Fe/GaAs(100) films at temperatures where the spontaneous zero field magnetization is zero. The films exhibit good cyrstalline structure, and the effect of magnetic anisotropies is apparent even though no zero field spin wave energy gap exists. An analysis is given in terms of a superparamagnetic model in which the film is treated as a network of non-interacting single domain magnetic islands. A spin wave analysis provides a means to separate measured values of anisotropy parameters from products involving anisotropy and island volume. In this way, a measure of the activation volume associated with superparamagnetic islands is obtained for different Fe film thicknesses. Results suggest that the island lateral area increases with increasing film thickness.

cond-mat.mtrl-sci↗