arXiv subjects

J. Gunn

Publications and source records attributed to J. Gunn.

13 recordsLinked to original sources

arXiv2022

Constrained Vector-like quark model with perturbative unitarity

We propose a Vector-like quark (VLQ) model constrained by the requirement of perturbative unitarity. In this scenario, the neutral and charged couplings of the new heavy VLQs to SM quarks and bosons are strictly related. We derive the corresponding sum rules and display the definite structure of the couplings. We analyse, qualitatively, the phenomenological consequences of this model in terms of expected width, production mechanism and decay channels. We show that the upcoming LHC run 3 could have sensitivity to such particles but the search strategy should be adapted to cover wide resonances decaying mainly in the charged channel T(B) -> Wq.

hep-ph↗

arXiv2019

First heat flux estimation in the lower divertor of WEST with embedded thermal measurements

The present paper deals with the surface heat flux estimation with thermocouples (TC) and fiber Bragg grating (FBG) embedded in the plasma facing components (PFC) of the WEST tokamak. A 2D heat transfer model combined with the conjugate gradient method (CGM) and the adjoint state is used to estimate the plasma heat flux deposited on the PFC. The plasma heat flux is characterized by the time evolution of its amplitude and spatial shape on the target (heat flux decay length $λ^t_q$, power spreading in the private flux region $S^t$ and the strike point location $x_0$). As a first step, five ohmic pulses have been investigated with different magnetic configuration and divertor X-point height varying from 44 to 68 mm from the surface. Despite an outboard shift, the relative displacements of the outer strike point as well as the heat flux decay length derived from the TC/FBG systems are consistent with the magnetic equilibrium reconstruction.

physics.plasm-ph↗

arXiv2019

The Apache Point Observatory Galactic Evolution Experiment (APOGEE) Spectrographs

We describe the design and performance of the near-infrared (1.51--1.70 micron), fiber-fed, multi-object (300 fibers), high resolution (R = lambda/delta lambda ~ 22,500) spectrograph built for the Apache Point Observatory Galactic Evolution Experiment (APOGEE). APOGEE is a survey of ~ 10^5 red giant stars that systematically sampled all Milky Way populations (bulge, disk, and halo) to study the Galaxy's chemical and kinematical history. It was part of the Sloan Digital Sky Survey III (SDSS-III) from 2011 -- 2014 using the 2.5 m Sloan Foundation Telescope at Apache Point Observatory, New Mexico. The APOGEE-2 survey is now using the spectrograph as part of SDSS-IV, as well as a second spectrograph, a close copy of the first, operating at the 2.5 m du Pont Telescope at Las Campanas Observatory in Chile. Although several fiber-fed, multi-object, high resolution spectrographs have been built for visual wavelength spectroscopy, the APOGEE spectrograph is one of the first such instruments built for observations in the near-infrared. The instrument's successful development was enabled by several key innovations, including a "gang connector" to allow simultaneous connections of 300 fibers; hermetically sealed feedthroughs to allow fibers to pass through the cryostat wall continuously; the first cryogenically deployed mosaic volume phase holographic grating; and a large refractive camera that includes mono-crystalline silicon and fused silica elements with diameters as large as ~ 400 mm. This paper contains a comprehensive description of all aspects of the instrument including the fiber system, optics and opto-mechanics, detector arrays, mechanics and cryogenics, instrument control, calibration system, optical performance and stability, lessons learned, and design changes for the second instrument.

astro-ph.IM↗

arXiv2016

SUBARU prime focus spectrograph: integration, testing and performance for the first spectrograph

The Prime Focus Spectrograph (PFS) of the Subaru Measurement of Images and Redshifts (SuMIRe) project for Subaru telescope consists in four identical spectrographs fed by 600 fibers each. Each spectrograph is composed by an optical entrance unit that creates a collimated beam and distributes the light to three channels, two visibles and one near infrared. This paper presents the on-going effort for the tests & integration process for the first spectrograph channel: we have developed a detailed Assembly Integration and Test (AIT) plan, as well as the methods, detailed processes and I&T tools. We describe the tools we designed to assemble the parts and to test the performance of the spectrograph. We also report on the thermal acceptance tests we performed on the first visible camera unit. We also report on and discuss the technical difficulties that did appear during this integration phase. Finally, we detail the important logistic process that is require to transport the components from other country to Marseille.

astro-ph.IM↗

arXiv2014

The MaNGA Integral Field Unit Fiber Feed System for the Sloan 2.5 m Telescope

We describe the design, manufacture, and performance of bare-fiber integral field units (IFUs) for the SDSS-IV survey MaNGA (Mapping Nearby Galaxies at APO) on the the Sloan 2.5 m telescope at Apache Point Observatory (APO). MaNGA is a luminosity-selected integral-field spectroscopic survey of 10,000 local galaxies covering 360-1030 nm at R ~ 2200. The IFUs have hexagonal dense packing of fibers with packing regularity of 3 um (RMS), and throughput of 96+/-0.5% from 350 nm to 1 um in the lab. Their sizes range from 19 to 127 fibers (3-7 hexagonal layers) using Polymicro FBP 120:132:150 um core:clad:buffer fibers to reach a fill fraction of 56%. High throughput (and low focal-ratio degradation) is achieved by maintaining the fiber cladding and buffer intact, ensuring excellent surface polish, and applying a multi-layer AR coating of the input and output surfaces. In operations on-sky, the IFUs show only an additional 2.3% FRD-related variability in throughput despite repeated mechanical stressing during plate plugging (however other losses are present). The IFUs achieve on-sky throughput 5% above the single-fiber feeds used in SDSS-III/BOSS, attributable to equivalent performance compared to single fibers and additional gains from the AR coating. The manufacturing process is geared toward mass-production of high-multiplex systems. The low-stress process involves a precision ferrule with hexagonal inner shape designed to lead inserted fibers to settle in a dense hexagonal pattern. The ferrule inner diameter is tapered at progressively shallower angles toward its tip and the final 2 mm are straight and only a few um larger than necessary to hold the desired number of fibers. This process scales to accommodate other fiber sizes and to IFUs with substantially larger fiber count. (Abridged)

astro-ph.IM↗

arXiv2007

A Comparison of SDSS Standard Star Catalog for Stripe 82 with Stetson's Photometric Standards

We compare Stetson's photometric standards with measurements listed in a standard star catalog constructed using repeated SDSS imaging observations. The SDSS catalog includes over 700,000 candidate standard stars from the equatorial stripe 82 (|Dec|<1.266 deg) in the RA range 20h 34' to 4h 00', and with the $r$ band magnitudes in the range 14--21. The distributions of measurements for individual sources demonstrate that the SDSS photometric pipeline correctly estimates random photometric errors, which are below 0.01 mag for stars brighter than (19.5, 20.5, 20.5, 20, 18.5) in ugriz, respectively (about twice as good as for individual SDSS runs). We derive mean photometric transformations between the SDSS gri and the BVRI system using 1165 Stetson stars found in the equatorial stripe 82, and then study the spatial variation of the difference in zeropoints between the two catalogs. Using third order polynomials to describe the color terms, we find that photometric measurements for main-sequence stars can be transformed between the two systems with systematic errors smaller than a few millimagnitudes. The spatial variation of photometric zeropoints in the two catalogs typically does not exceed 0.01 magnitude. Consequently, the SDSS Standard Star Catalog for Stripe 82 can be used to calibrate new data in both the SDSS ugriz and the BVRI systems with a similar accuracy.

astro-ph↗

arXiv2007

SDSS spectroscopic survey of stars

In addition to optical photometry of unprecedented quality, the Sloan Digital Sky Survey (SDSS) is also producing a massive spectroscopic database. We discuss determination of stellar parameters, such as effective temperature, gravity and metallicity from SDSS spectra, describe correlations between kinematics and metallicity, and study their variation as a function of the position in the Galaxy. We show that stellar parameter estimates by Beers et al. show a good correlation with the position of a star in the g-r vs. u-g color-color diagram, thereby demonstrating their robustness as well as a potential for photometric parameter estimation methods. Using Beers et al. parameters, we find that the metallicity distribution of the Milky Way stars at a few kpc from the galactic plane is bimodal with a local minimum at [Z/Zo]~ -1.3. The median metallicity for the low-metallicity [Z/Zo]<-1.3 subsample is nearly independent of Galactic cylindrical coordinates R and z, while it decreases with z for the high-metallicity [Z/Zo]> -1.3 sample. We also find that the low-metallicity sample has ~2.5 times larger velocity dispersion and that it does not rotate (at the ~10 km/s level), while the rotational velocity of the high-metallicity sample decreases smoothly with the height above the galactic plane.

astro-ph↗

arXiv2004

Formation of convective cells in the scrape-off layer of the CASTOR tokamak

Understanding of the scrape-off layer (SOL) physics in tokamaks requires diagnostics with sufficient temporal and spatial resolution. This contribution describes results of experiments performed in the SOL of the CASTOR tokamak (R=40 cm, a = 6 cm) by means of a ring of 124 Langmuir probes surrounding the whole poloidal cross section. The individual probes measure either the ion saturation current of the floating potential with the spatial resolution up to 3 mm. Experiments are performed in a particular magnetic configuration, characterized by a long parallel connection length in the SOL, L_par ~q2piR. We report on measurements in discharges, where the edge electric field is modified by inserting a biased electrode into the edge plasma. In particular, a complex picture is observed, if the biased electrode is located inside the SOL. The poloidal distribution of the floating potential appears to be strongly non-uniform at biasing. The peaks of potential are observed at particular poloidal angles. This is interpreted as formation of a biased flux tube, which emanates from the electrode along the magnetic field lines and snakes q times around the torus. The resulting electric field in the SOL is 2-dimensional, having the radial as well as the poloidal component. It is demonstrated that the poloidal electric field E_pol convects the edge plasma radially due to the E_pol x B_T drift either inward or outward depending on its sign. The convective particle flux is by two orders of magnitude larger than the fluctuation-induced one and consequently dominates.

physics.plasm-ph↗

arXiv2004

Cosmological parameter analysis including SDSS Ly-alpha forest and galaxy bias: constraints on the primordial spectrum of fluctuations, neutrino mass, and dark energy

We combine the constraints from the recent Ly-alpha forest and bias analysis of the SDSS with previous constraints from SDSS galaxy clustering, the latest supernovae, and WMAP . Combining WMAP and the lya we find for the primordial slope n_s=0.98\pm 0.02. We see no evidence of running, dn/d\ln k=-0.003\pm 0.010, a factor of 3 improvement over previous constraints. We also find no evidence of tensors, r<0.36 (95% c.l.). A positive correlation between tensors and primordial slope disfavors chaotic inflation type models with steep slopes: V \propto ϕ^4 is outside the 3-sigma contour. For the amplitude we find sigma_8=0.90\pm 0.03 from the lyaf and WMAP alone. We find no evidence of neutrino mass: for the case of 3 massive neutrino families with an inflationary prior, \sum m_ν<0.42eV and the mass of lightest neutrino is m_1<0.13eV at 95% c.l. For the 3 massless + 1 massive neutrino case we find m_ν<0.79eV for the massive neutrino, excluding at 95% c.l. all neutrino mass solutions compatible with the LSND results. We explore dark energy constraints in models with a fairly general time dependence of dark energy equation of state, finding Omega_lambda=0.72\pm 0.02, w(z=0.3)=-0.98^{+0.10}_{-0.12}, the latter changing to w(z=0.3)=-0.92^{+0.09}_{-0.10} if tensors are allowed. We find no evidence for variation of the equation of state with redshift, w(z=1)=-1.03^{+0.21}_{-0.28}. These results rely on the current understanding of the lyaf and other probes, which need to be explored further both observationally and theoretically, but extensive tests reveal no evidence of inconsistency among different data sets used here.

astro-ph↗

arXiv2004

Cosmological parameters from SDSS and WMAP

We measure cosmological parameters using the three-dimensional power spectrum P(k) from over 200,000 galaxies in the Sloan Digital Sky Survey (SDSS) in combination with WMAP and other data. Our results are consistent with a ``vanilla'' flat adiabatic Lambda-CDM model without tilt (n=1), running tilt, tensor modes or massive neutrinos. Adding SDSS information more than halves the WMAP-only error bars on some parameters, tightening 1 sigma constraints on the Hubble parameter from h~0.74+0.18-0.07 to h~0.70+0.04-0.03, on the matter density from Omega_m~0.25+/-0.10 to Omega_m~0.30+/-0.04 (1 sigma) and on neutrino masses from <11 eV to <0.6 eV (95%). SDSS helps even more when dropping prior assumptions about curvature, neutrinos, tensor modes and the equation of state. Our results are in substantial agreement with the joint analysis of WMAP and the 2dF Galaxy Redshift Survey, which is an impressive consistency check with independent redshift survey data and analysis techniques. In this paper, we place particular emphasis on clarifying the physical origin of the constraints, i.e., what we do and do not know when using different data sets and prior assumptions. For instance, dropping the assumption that space is perfectly flat, the WMAP-only constraint on the measured age of the Universe tightens from t0~16.3+2.3-1.8 Gyr to t0~14.1+1.0-0.9 Gyr by adding SDSS and SN Ia data. Including tensors, running tilt, neutrino mass and equation of state in the list of free parameters, many constraints are still quite weak, but future cosmological measurements from SDSS and other sources should allow these to be substantially tightened.

astro-ph↗

arXiv2003

Superhumps in Cataclysmic Binaries. XXIV. Twenty More Dwarf Novae

We report precise measures of the orbital and superhump period in twenty more dwarf novae. For ten stars, we report new and confirmed spectroscopic periods - signifying the orbital period P_o - as well as the superhump period P_sh. These are GX Cas, HO Del, HS Vir, BC UMa, RZ Leo, KV Dra, KS UMa, TU Crt, QW Ser, and RZ Sge. For the remaining ten, we report a medley of P_o and P_sh measurements from photometry; most are new, with some confirmations of previous values. These are KV And, LL And, WX Cet, MM Hya, AO Oct, V2051 Oph, NY Ser, KK Tel, HV Vir, and RX J1155.4-5641. Periods, as usual, can be measured to high accuracy, and these are of special interest since they carry dynamical information about the binary. We still have not quite learned how to read the music, but a few things are clear. The fractional superhump excess epsilon [=(P_sh-P_o)/P_o] varies smoothly with P_o. The scatter of the points about that smooth curve is quite low, and can be used to limit the intrinsic scatter in M_1, the white dwarf mass, and the mass-radius relation of the secondary. The dispersion in M_1 does not exceed 24%, and the secondary-star radii scatter by no more than 11% from a fixed mass-radius relation. For the well-behaved part of epsilon(P_o) space, we estimate from superhump theory that the secondaries are 18+-6% larger than theoretical ZAMS stars. This affects some other testable predictions about the secondaries: at a fixed P_o, it suggests that the secondaries are (compared with ZAMS predictions) 40+-14% less massive, 12+-4% smaller, 19+-6% cooler, and less luminous by a factor 2.5(7). The presence of a well-defined mass-radius relation, reflected in a well-defined epsilon(P_o) relation, strongly limits effects of nuclear evolution in the secondaries.

astro-ph↗

arXiv2000

Optical and Infrared Colors of Stars Observed by 2MASS and SDSS

We discuss optical and infrared photometric properties of stars matched in the Two Micron All Sky Survey (2MASS) and the Sloan Digital Sky Survey (SDSS) commissioning data for 50 deg2 of sky. About 98% (63,000) of objects listed in the 2MASS Point Source Catalog in the analyzed area are matched within 2 arcsec to an SDSS source. The matched sources represent 8% of the about 800,000 SDSS sources in this area, and 15% of them are resolved in SDSS imaging data, although they are detected as point sources in 2MASS data. For about 14,000 stars with the smallest photometric errors (< 10%) in both surveys, we present optical and infrared color-magnitude and color-color diagrams. We use optical (SDSS) colors to identify the stellar spectral sequence and show that stars of different spectral types can have similar infrared colors, thus making the classification of stars based on only 2MASS data very difficult. However, a broad separation into ``early'' and ``late'' spectral types (relative to type K0) is possible with a reliability of about 95% even with 2MASS colors alone. The distributions of matched sources in color-magnitude and color-color diagrams are compared to the predictions of a stellar population synthesis code. We find that the models are in fair overall agreement with the data. The most significant discrepancies are found for the number ratio of ``early'' to ``late'' type stars (by about a factor of 2) and in the colors of M stars (up to 0.2 mag).

astro-ph↗

arXiv1998

The Sloan Digital Sky Survey Photometric Camera

We have constructed a large format mosaic CCD camera for the Sloan Digital Sky Survey. The camera consists of two arrays, a photometric array which uses 30 2048 x 2048 SITe/Tektronix CCDs (24 micron pixels) with an effective imaging area of 720 square cm, and an astrometric array which uses 24 400 x 2048 CCDs with the same pixel size, which will allow us to tie bright astrometric standard stars to the objects imaged in the photometric camera. The instrument will be used to carry out photometry essentially simultaneously in five color bands spanning the range accessible to silicon detectors on the ground in the time-delay- and-integrate (TDI) scanning mode. The photometric detectors are arrayed in the focal plane in six columns of five chips each such that two scans cover a filled stripe 2.5 degrees wide. This paper presents engineering and technical details of the camera.

astro-ph↗