arXiv subjects

J. H. Silber

Publications and source records attributed to J. H. Silber.

7 recordsLinked to original sources

arXiv2026

A Finely-Binned Measurement of the Connected Even-Parity Galaxy 4-Point Correlation Function of DESI Year 1 Luminous Red Galaxies

We present the connected even-parity galaxy 4-Point Correlation Function (4PCF) of DESI Year 1 (Y1) Luminous Red Galaxies (LRGs). This is one of the first measurements of the connected 4PCF on data, and shows a clear detection at $\sim$12 to 17$σ$ in the full-sky analysis. We test the robustness of the signal by varying three factors: hemisphere (north vs. south), redshift range (either the full range $0.4 < z < 1.1$ or the higher-number-density interval $0.4 < z < 0.8$), and sample completeness (the full sample vs. only the most complete regions within the number density-motivated cut). Finally, we cross-correlate different patches that are spatially well-separated, and thus should have largely independent noise. This approach, at leading order, is able to remove mismatch between the covariance matrix of the data and that of the mocks; however, in certain cases at the cost of sensitivity. We find $\sim$15$σ$ evidence for an even-parity 4PCF in this approach. Overall, the studies of the 4PCF presented here probe sensitively any mismatch between mock catalogs and data, and also open up the prospect of fitting a model, constraining cosmological parameters and galaxy biases, and searching for Baryon Acoustic Oscillation (BAO) features.

astro-ph.CO↗

arXiv2026

A measurement of $H_0$ from DESI DR1 using energy densities

We present a new measurement of the Hubble constant, independent of standard rulers and robust to pre-recombination modifications such as Early Dark Energy (EDE), obtained by calibrating the total energy density of the Universe. We start using the present-day photon density as an anchor, and use the baryon-to-photon ratio from Big Bang Nucleosynthesis based measurements and the baryon-to-matter ratio from the baryons' imprint on galaxy clustering to translate to a physical matter density at present day. We then compare this to measurements of the ratio of the matter density to the critical density ($Ω_{\mathrm{m}}$), calculated using the relative positions of the baryon acoustic oscillations, to measure the critical density of the universe and hence $H_0$. The important measurements of the evolution of the energy density all happen at low redshift, so we consider this a low-redshift measurement. We validate our method both on a suite of $N$-body mocks and on noiseless theory vectors generated across a wide range of Hubble parameters in both $Λ$CDM and EDE cosmologies. Using DESI DR1 data combined with the angular CMB acoustic scale and the latest BBN constraints, we find $H_0 = 69.0 \pm 2.5$ km s$^{-1}$ Mpc$^{-1}$, consistent with existing early and late-time determinations of the Hubble constant. We consider the impact of non-standard dark energy evolution on our measurement. Future data, including that from further iterations of DESI and from Euclid, will add to these results providing a powerful test of the Hubble tension.

astro-ph.CO↗

arXiv2026

Systematic uncertainties on DESI Tully-Fisher distances constrained with Integral Field Spectroscopy

The Tully--Fisher (TF) relation is an empirical tool for estimating distances to spiral galaxies. The Dark Energy Spectroscopic Instrument (DESI) Peculiar Velocity (PV) Survey uses \texttt{`tractor'} photometric position angles to place fibers along the galaxy's semi-major axis and infer maximum rotational velocities for $\approx$ 53,000 spirals. Systematic errors arise if the photometric PA differs from the kinematic PA from velocity fields. We quantify systematic uncertainties in DESI-TF distance estimates from photometric PAs and assess the impact of photometric--kinematic PA misalignments. We analyze 215 nearby galaxies from the PISCO and AMUSING surveys, estimating maximum rotational velocities at $0.4\,R_{26}$ for consistency with DESI-PV. Kinematic parameters are derived using \texttt{`PaFit'} from \texttt{`Cappellari Software'}. Global photometric parameters rely on Siena Galaxy Atlas SGA-2020 \texttt{`tractor'} data, with \texttt{`HostPhot'} as an alternative approach. Approximately $28\%$ of our sample exhibit photometric--kinematic PA misalignments $>10^\circ$. The median bias in distance is $\approx +1.98\,\mathrm{Mpc}$ with a skewed residual distribution of outliers. The overall distance standard deviation is $19.35\,\mathrm{Mpc}$, with misaligned galaxies showing twice the dispersion of aligned ones. The Mean Percentage Error is $2.8\% \pm 1.96$ (SE). High galaxy-to-galaxy scatter appears in DESI-TF distances, particularly for misaligned systems. Because DESI-TF targets lack kinematic PA measurements, we recommend a global fractional uncertainty of $\approx 3.5\%$. When kinematic information is available, aligned galaxies with offsets $<10^\circ$ are consistent with $\approx 1\%$ uncertainty, while strongly misaligned or incomplete systems warrant an upper threshold of $\approx 10\%$.

astro-ph.GA↗

arXiv2026

PAC in DESI. II. Galaxy-halo connection into the $10^{6}{\rm M}_{\odot}$ frontier

Understanding dwarf galaxy formation is crucial for testing dark matter models and reionization physics. However, constructing stellar-mass complete spectroscopic samples at low masses is increasingly difficult, and the potential existence of a local void complicates studies in an average environment. The Photometric object Around Cosmic webs (PAC) method, which combines deep photometric and spectroscopic data to measure the excess surface density $\bar{n}_2w_{\rm{p}}(r_{\rm{p}})$ of photometric objects around spectroscopic tracers, offers a promising path forward. We model 349 $\bar{n}_2w_{\rm{p}}(r_{\rm{p}})$ measurements from DESI Y1 BGS and DECaLS, reaching $M_*=10^{6.4}\,{\rm M}_{\odot}$, using a stellar mass-halo mass relation (SHMR)-based subhalo abundance matching framework applied to two high-resolution $N$-body simulations from the Jiutian suite. The resulting SHMR is constrained down to $M_{\rm h}\simeq10^{8.0}\,h^{-1}{\rm M}_{\odot}$, revealing a clear upturn at $\sim10^{10.0}\,h^{-1}{\rm M}_{\odot}$ toward lower masses, indicating rising star-formation efficiency (SFE) in small haloes. This feature persists under extensions of the model that allow mass-dependent scatter, reionization-induced suppression of the halo occupation fraction, galaxy assembly bias, and alternative cosmologies. Combining with the results from Paper I, we find that central red galaxies dominate the low-mass regime. Our results motivate a hypothesis in which SFE is significantly higher than previously thought prior to reionization, enabling relatively massive galaxies to form in small haloes. These systems are subsequently quenched by the UV background, producing the central red dwarf galaxies observed. Finally, we obtain $3σ$ and $5σ$ upper mass bounds of $10^{8.80}\,h^{-1}{\rm M}_{\odot}$ and $10^{10.24}\,h^{-1}{\rm M}_{\odot}$ on the smallest haloes required to exist.

astro-ph.GA↗

arXiv2026

The DESI Y1 RR Lyrae catalog II: The metallicity dependency of pulsational properties, the shape of the RR Lyrae instability strip, and metal rich RR Lyrae

RR Lyrae stars (RRLs) are valuable probes of both Milky Way assembly and stellar-evolution physics. Using a sample 6,240 RRLs obtained in the first year of the Dark Energy Spectroscopic Instrument (DESI) survey, we investigate the metallicity of RRLs and its correlation with their pulsation properties. We find that (1) a clear correlation between period and [Fe/H] reinforces the view that the long-standing Oosterhoff dichotomy arises from the scarcity of intermediate-metallicity Galactic globular clusters hosting sizeable RRL samples; (2) high-amplitude short-period and small-amplitude short-period variables are comparatively metal-rich, with mean [Fe/H] = $-1.39 \pm 0.27$ and $-1.30 \pm 0.28$, respectively; (3) in double-mode pulsators (RRd) the metallicity declines smoothly with increasing fundamental-mode period, and anomalous RRd stars occupy a remarkably narrow [Fe/H] range relative to classical RRd stars; (4) this spectroscopic sample let us, for the first time, place empirical constraints on the metallicity-dependent topology of the instability strip using phase-corrected effective temperatures and a large number of RRLs, where we observe an instability strip that moves towards cooler $T_{\rm eff}$ with declining [Fe/H] with a width roughly consistent with stellar-evolution models; and (5) a subset of metal-rich RRLs exhibits orbits consistent with disk membership and halo kinematics. Our results confirm the tantalizing potential of DESI for Galactic and stellar astrophysics and highlight the importance of the even larger samples of RRLs and data-processing improvements forthcoming in future DESI data releases.

astro-ph.GA↗

arXiv2024

Constraining primordial non-Gaussianity from the large scale structure two-point and three-point correlation functions

Surveys of cosmological large-scale structure (LSS) are sensitive to the presence of local primordial non-Gaussianity (PNG), and may be used to constrain models of inflation. Local PNG, characterized by fNL, the amplitude of the quadratic correction to the potential of a Gaussian random field, is traditionally measured from LSS two-point and three-point clustering via the power spectrum and bi-spectrum. We propose a framework to measure fNL using the configuration space two-point correlation function (2pcf) monopole and three-point correlation function (3pcf) monopole of survey tracers. Our model estimates the effect of the scale-dependent bias induced by the presence of PNG on the 2pcf and 3pcf from the clustering of simulated dark matter halos. We describe how this effect may be scaled to an arbitrary tracer of the cosmological matter density. The 2pcf and 3pcf of this tracer are measured to constrain the value of fNL. Using simulations of luminous red galaxies observed by the Dark Energy Spectroscopic Instrument (DESI), we demonstrate the accuracy and constraining power of our model, and forecast the ability to constrainfNL to a precision of sigma(fNL) = 22 with one year of DESI survey data.

astro-ph.CO↗

arXiv2018

Mortality Rate Estimation and Standardization for Public Reporting: Medicare's Hospital Compare

Bayesian models are increasing fit to large administrative data sets and then used to make individualized recommendations. For instance, Medicare's Hospital Compare webpage provides information to patients about specific hospital mortality rates for a heart attack or Acute Myocardial Infarction (AMI). Hospital Compare's current recommendations are based on a random effects logit model with a random hospital indicator and patient risk factors. By checking the out of sample calibration of their individualized predictions against general empirical advice, we are led to substantial revisions of the Hospital Compare model for AMI mortality. As opposed to Hospital Compare, our revised models incorporate information about hospital volume, nursing staff, medical residents, and the hospital's ability to perform cardiovascular procedures, information that is clearly needed if a model is to make appropriately calibrated predictions. Additionally, we contrast several methods for summarizing a model's predictions for use by the public. We find that indirect standardization, as currently used by Hospital Compare, fails to adequately control for differences in patient risk factors, whereas direct standardization provides good control and is easy to interpret.

stat.AP↗