arXiv subjects

J. He

Publications and source records attributed to J. He.

At least 19 recordsLinked to original sources

arXiv2026

Dead-zone-free free-induction-decay alkali-metal atomic magnetometer

The detection dead zone is an important systematic limitation in scalar atomic magnetometers, constraining their practical utility. In this work, we demonstrate a sensitive dead zone free scalar magnetometer by integrating previously established techniques into a FID magnetometer based on Bell Bloom optical pumping. The dead zone is eliminated by inserting a reflecting mirror within a multipass cavity assisted atomic cell, which folds the optical beam into orthogonal paths. Our analysis reveals that interregion cross talk is essential for interpreting the resulted experimental signals. The sensor exhibits oscillation signal amplitude variations within a factor of three across all orientations in three dimensional space, and a field sensitivity better than 80 fT/Hz^(1/2) over the full space. We further characterize the heading error in the geomagnetic field range, where experimental results agree with theoretical predictions within 0.7 nT. Additionally, the sensor can operate in a closed loop mode by feeding back the real time frequency extracted from the FID signal to modulate the pump beam, we characterize the magnetic field slew rate of the sensor. This work paves the way towards a sensitive vector FID magnetometer.

physics.atom-ph↗

arXiv2026

Optimized Beamforming and Bandwidth Allocation in Multi-Antenna UAV-Assisted Vehicular Networks

Ensuring reliable communication for mission-critical vehicles in dynamic environments with limited infrastructure is a significant challenge due to interference and spectrum scarcity. This paper investigates a UAV-assisted vehicular communication framework that leverages multi-antenna beamforming and dynamic bandwidth allocation to provide prioritized and interference-mitigated wireless links. Vehicles are classified according to their service priority, with each class assigned a distinct frequency band to reduce interference. Within each class, optimized beamforming further minimizes transmission overlap and enhances spectral efficiency. The optimization problem is solved using an alternating optimization framework, incorporating two beamforming strategies: one based on successive convex approximation (SCA) and the other derived in closed form. Numerical results indicate that the proposed scheme outperforms baseline approaches that optimize only bandwidth allocation or beamforming in terms of overall system performance. Among the two joint optimization methods, the closed-form solution achieves higher sum rates and generally requires less transmit power, while also exhibiting lower computational complexity compared with the SCA-based approach.

eess.SP↗

arXiv2026

The GRB joint scientific analysis pipeline of the ECLAIRs and GRM instruments on board SVOM

The study of the prompt high-energy emission of Gamma-Ray Bursts (GRBs) with SVOM relies on the observations performed by ECLAIRs (4-150 keV) and the Gamma-Ray Monitor (GRM, 0.015-5 MeV), the two wide field-of-view instruments on board the satellite. In this article, we introduce the eclgrm pipelines running at the French Science Center of SVOM, which combine the ECLAIRs and GRM data to generate scientific data products describing the GRB broad-band temporal and spectral properties. The architecture of the pipelines is presented, as well as their activation following each onboard trigger, and their workflow. The statistical data analysis methods employed by the pipelines are described, along with the scientific data products that are created in real time or from the full event data. We also present the eclgrm-ui user interface which allows the scientists on shift to monitor the automated data processings in the pipelines, and to optimize the analysis results interactively.

astro-ph.HE↗

arXiv2026

Emergent superconductivity at 16.3 K in an altermagnetic candidate Na$_{2-x}$V$_2$Se$_2$O with broken inversion symmetry

Altermagnets (AMs), characterized by zero net magnetization and momentum-dependent spin splitting, are anticipated to hold significant potential for generating multiple exotic and uncommon superconducting states. However, superconductivity has not yet been realized in AMs to date. Recently, two-dimensional (2D) V$_2$Ch$_2$O (Ch = Se, Te) monolayers, as well as AV$_2$Ch$_2$O (A = K, Rb, Cs) crystals containing [V$_2$Ch$_2$O]$^{\delta -}$ building layers, have been predicted and/or demonstrated to be promising altermagnetic materials. Our preliminary attempts to explore superconductivity in these materials by applying pressure or chemical doping were unsuccessful. Here we report the discovery of superconductivity at a relatively high transition temperature of ~ 16.3 K in a newly synthesized layered compound, Na$_{2-x}$V$_2$Se$_2$O, a variant of AV$_2$Ch$_2$O. In this structure, the [V$_2$Ch$_2$O]$^{\delta -}$ layers are interspersed with double layers of Na$^+$ instead of a single layer of A$^+$, with sodium sites being only half-filled. This new family of layered vanadium oxychalcogenides, lacking inversion symmetry, represents an intriguing platform for exploring altermagnetic superconductors, and holds the potential to reveal novel phenomena, such as topological states, van Hove singularities, and finite-momentum superconductivity. Furthermore, this material acts as a "bridge" between the cuprate/nickelate and iron-pnictide high temperature superconductors, providing new hope and opportunity to expand the category of layered superconductors with higher critical temperatures (T$_c$) and enhancing our understanding of the underlying mechanisms in these systems.

cond-mat.supr-con↗

arXiv2025

Reconstruction of neutrino events in the Accelerator Neutrino Neutron Interaction Experiment: Part I

The Accelerator Neutrino Neutron Interaction Experiment (ANNIE) was designed to reconstruct neutrino events from the Fermilab Booster Neutrino Beam (BNB) with the parallel goals of measuring neutron production in interactions with oxygen and serving as a testbed for new technology. The ANNIE detector consists of a 26-ton water Cherenkov target tank instrumented with conventional photomultiplier tubes (PMTs), a downstream tracking muon spectrometer, and an upstream double wall of plastic scintillator to serve to veto charged particles incoming from neutrino events that occur upstream of the experimental setup. ANNIE has also deployed multiple Large-Area Picosecond PhotoDetectors (LAPPDs) and a test vessel of water-based liquid scintillator (WbLS). This paper describes the event reconstruction performance of the detector before implementation of these novel technologies, which will serve as a baseline against which their impact can be measured. That said, even the techniques used for event reconstruction using only the conventional PMT array and muon spectrometer are significantly different than those used in other water Cherenkov detectors due to the small size of ANNIE (which makes nanosecond-scale timing not as useful as in a large detector) and the availability of reconstruction information from the tracking muon spectrometer. We demonstrate that combining the information from these two elements into a single fit using only pattern recognition yields a muon vertex uncertainty of 60 cm, a directional uncertainty of 13.2 degrees, and energy reconstruction uncertainty of about 10\% for BNB muon neutrino Charged Current Zero Pion (CC0pi) events.

hep-ex↗

arXiv2025

First Light from Beam Neutrinos on an LAPPD in ANNIE

The Accelerator Neutrino Neutron Interaction Experiment (ANNIE) is both a physics experiment and a technology testbed for next-generation light-based neutrino detection. In this paper, we report the first demonstration of a fully integrated Large Area Picosecond Photodetector (LAPPD) operating in a running neutrino beam experiment. Particular focus is given to the design, commissioning, and successful deployment of the Packaged ANNIE LAPPD (PAL), a waterproof, self-triggering module incorporating fast waveform digitization and precision timing synchronized to the ANNIE detector subsystems. We identify beam-correlated LAPPD data frames consistent with charged-current neutrino interactions observed in multiple detector subsystems, establishing the first detection of neutrino-induced Cherenkov light with an LAPPD. These results validate the system-level performance of LAPPDs under realistic experimental conditions-including long-term stability, timing synchronization, and event matching with conventional PMT and muon detector systems-marking a critical step toward their deployment in future large-scale neutrino and particle detectors.

hep-ex↗

arXiv2025

Automated segmentation of pediatric neuroblastoma on multi-modal MRI: Results of the SPPIN challenge at MICCAI 2023

Surgery plays an important role within the treatment for neuroblastoma, a common pediatric cancer. This requires careful planning, often via magnetic resonance imaging (MRI)-based anatomical 3D models. However, creating these models is often time-consuming and user dependent. We organized the Surgical Planning in Pediatric Neuroblastoma (SPPIN) challenge, to stimulate developments on this topic, and set a benchmark for fully automatic segmentation of neuroblastoma on multi-model MRI. The challenge started with a training phase, where teams received 78 sets of MRI scans from 34 patients, consisting of both diagnostic and post-chemotherapy MRI scans. The final test phase, consisting of 18 MRI sets from 9 patients, determined the ranking of the teams. Ranking was based on the Dice similarity coefficient (Dice score), the 95th percentile of the Hausdorff distance (HD95) and the volumetric similarity (VS). The SPPIN challenge was hosted at MICCAI 2023. The final leaderboard consisted of 9 teams. The highest-ranking team achieved a median Dice score 0.82, a median HD95 of 7.69 mm and a VS of 0.91, utilizing a large, pretrained network called STU-Net. A significant difference for the segmentation results between diagnostic and post-chemotherapy MRI scans was observed (Dice = 0.89 vs Dice = 0.59, P = 0.01) for the highest-ranking team. SPPIN is the first medical segmentation challenge in extracranial pediatric oncology. The highest-ranking team used a large pre-trained network, suggesting that pretraining can be of use in small, heterogenous datasets. Although the results of the highest-ranking team were high for most patients, segmentation especially in small, pre-treated tumors were insufficient. Therefore, more reliable segmentation methods are needed to create clinically applicable models to aid surgical planning in pediatric neuroblastoma.

cs.CV↗

arXiv2025

Asymmetry analysis of Autler-Townes doublet in the trap-loss fluorescence spectroscopy of cesium MOT with single step Rydberg excitation

Autler-Townes (AT) doublet, a fundamental manifestation of quantum interference effects, serves as a critical tool for studying the dynamic behavior of Rydberg atoms. Here, we investigate the asymmetry of the Autler-Townes (AT) doublet in trap-loss fluorescence spectroscopy (TLFS) of cesium (Cs) atoms confined in a magneto-optical trap (MOT) with single-step Rydberg excitation using a 319-nm ultraviolet (UV) laser. A V-type three-level system involving the ground state $6\text{S}_{1/2}$ ($\text{F}$=4), excited state $6\text{P}_{3/2}$ ($\text{F}^{'}$=5) , and Rydberg state ($n\text{P}_{3/2}$ ($\text{m}_\text{J}$=+3/2)) is theoretically modeled to analyze the nonlinear dependence of the AT doublet's asymmetry and interval on the cooling laser detuning. Experiments reveal that as the cooling laser detuning $\Delta_1$ decreases from $-$15 MHz to $-$10 MHz, the AT doublet exhibits increasing symmetry, while its interval shows a nonlinear decrease. Theoretical simulations based on the density matrix equation and Lindblad master equation align closely with experimental data, confirming the model's validity. This study provides insights into quantum interference dynamics in multi-level systems and offers a systematic approach for optimizing precision measurements in cold atom spectroscopy.

physics.atom-ph↗

arXiv2024

Ferroelectric domain walls for environmental sensors

Domain walls in ferroelectric oxides provide fertile ground for the development of next-generation nanotechnology. Examples include domain-wall-based memory, memristors, and diodes, where the unusual electronic properties and the quasi-2D nature of the walls are leveraged to emulate the behavior of electronic components at ultra-small length scales. Here, we demonstrate atmosphere-related reversible changes in the electronic conduction at neutral ferroelectric domain walls in Er(Mn,Ti)O$_3$. By exposing the system to reducing and oxidizing conditions, we drive the domain walls from insulating to conducting, and vice versa, translating the environmental changes into current signals. Density functional theory calculations show that the effect is predominately caused by charge carrier density modulations, which arise as oxygen interstitials accumulate at the domain walls. The work introduces an innovative concept for domain-wall based environmental sensors, giving an additional dimension to the field of domain wall nanoelectronics and sensor technology in general.

cond-mat.mtrl-sci↗

arXiv2024

Challenges and Insights in Growing Epitaxial FeSn Thin Films on GaAs(111) substrate Using Molecular Beam Epitaxy

FeSn is a room-temperature antiferromagnet composed of alternating Fe3Sn kagome layers and honeycomb Sn layers. Its distinctive lattice allows the formation of linearly dispersing Dirac bands and topological flat bands in its electronic band structure, positioning FeSn as an ideal candidate for investigating the interplay between magnetism and topology. In this study, we investigate the epitaxial growth of FeSn thin films on GaAs(111) substrates by molecular beam epitaxy. A significant challenge in this growth process is the diffusion of Ga and As from the substrate into the deposited films and the diffusion of Fe into the substrate. This diffusion complicates the formation of a pure FeSn phase. Through a comprehensive analysis-including reflection high energy electron diffraction, high-resolution X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and vibrating sample magnetometry-we demonstrate that the Sn evaporation temperature plays a critical role in influencing the crystallinity, surface morphology, and magnetic behaviour of the films. Our results show that while it is difficult to grow a single-phase FeSn film on GaAs due to diffusion, optimizing the Sn evaporation temperature can enhance the dominance of the FeSn phase, partially overcoming these challenges.

cond-mat.mtrl-sci↗

arXiv2023

Deployment of Water-based Liquid Scintillator in the Accelerator Neutrino Neutron Interaction Experiment

The Accelerator Neutrino Neutron Interaction Experiment (ANNIE) is a 26-ton water Cherenkov neutrino detector installed on the Booster Neutrino Beam (BNB) at Fermilab. Its main physics goals are to perform a measurement of the neutron yield from neutrino-nucleus interactions, as well as a measurement of the charged-current cross section of muon neutrinos. An equally important focus is placed on the research and development of new detector technologies and target media. Specifically water-based liquid scintillator (WbLS) is of interest as a novel detector medium, as it allows for the simultaneous detection of scintillation and Cherenkov light. This paper presents the deployment of a 366L WbLS vessel in ANNIE in March 2023 and the subsequent detection of both Cherenkov light and scintillation from the WbLS. This proof-of-concept allows for the future development of reconstruction and particle identification algorithms in ANNIE, as well as dedicated analyses, such as the search for neutral current events and the hadronic scintillation component within the WbLS volume.

hep-ex↗

arXiv2023

Water ice: temperature-dependent refractive indexes and their astrophysical implications

Interstellar ices are largely composed of frozen water. It is important to derive fundamental parameters for H$_2$O ice such as absorption and scattering opacities for which accurate complex refractive indexes are needed. The primary goal of this work is to derive ice-grain opacities based on accurate H$_2$O ice complex refractive indexes and to assess their impact on the derivation of ice column densities and porosity in space. We use the \texttt{optool} code to derive ice-grain opacities values based on new mid-IR complex refractive index measurements of H$_2$O ice. Next, we use those opacities in the \texttt{RADMC-3D} code to run a radiative transfer simulation of a protostellar envelope containing H$_2$O ice. This is used to calculate water ice column densities. We find that the real refractive index in the mid-IR of H$_2$O ice at 30~K is $\sim$14\% lower than previously reported in the literature. This has a direct impact on the ice column densities derived from the simulations of embedded protostars. We find that ice porosity plays a significant role in the opacity of icy grains and that the H$_2$O libration mode can be used as a diagnostic tool to constrain the porosity level. Finally, the refractive indexes presented here allow us to estimate a grain size detection limit of 18~$\mu$m based on the 3~$\mu$m band whereas the 6~$\mu$m band allows tracing grain sizes larger than 20~$\mu$m. Based on radiative transfer simulations using new mid-IR refractive indexes, we conclude that H$_2$O ice leads to more absorption of infrared light than previously estimated. This implies that the 3 and 6~$\mu$m bands remain detectable in icy grains with sizes larger than 10~$\mu$m. Finally, we propose that also the H$_2$O ice libration band can be a diagnostic tool to constrain the porosity level of the interstellar ice, in addition to the OH dangling bond, which is routinely used for this purpose.

astro-ph.IM↗

arXiv2023

Quantifying memory in spin glasses

Rejuvenation and memory, long considered the distinguishing features of spin glasses, have recently been proven to result from the growth of multiple length scales. This insight, enabled by simulations on the Janus~II supercomputer, has opened the door to a quantitative analysis. We combine numerical simulations with comparable experiments to introduce two coefficients that quantify memory. A third coefficient has been recently presented by Freedberg et al. We show that these coefficients are physically equivalent by studying their temperature and waiting-time dependence.

cond-mat.dis-nn↗

arXiv2023

Acceptance tests of Hamamatsu R7081 photomultiplier tubes

Photomultiplier tubes (PMTs) are traditionally an integral part of large underground experiments as they measure the light emission from particle interactions within the enclosed detection media. The BUTTON experiment will utilise around 100 PMTs to measure the response of different media suitable for rare event searches. A subset of low-radioactivity 10-inch Hamamatsu R7081 PMTs were tested, characterised, and compared to manufacture certification. This manuscript describes the laboratory tests and analysis of gain, peak-to-valley ratio and dark rate of the PMTs to give an understanding of the charge response, signal-to-noise ratio and dark noise background as an acceptance test of the suitability of these PMTs for water-based detectors. Following the evaluation of these tests, the PMT performance agreed with the manufacturer specifications. These results are imperative for modeling the PMT response in detector simulations and providing confidence in the performance of the devices once installed in the detector underground.

physics.ins-det↗

arXiv2023

Memory and Rejuvenation in Glassy Systems

The memory effect in a single crystal spin glass ($\mathrm{Cu}_{0.92}\mathrm{Mn}_{0.08}$) has been measured using \freq ac susceptibility techniques over a temperature range of $0.4 - 0.7 \, T_g$ and a model of the memory effect has been developed. A double-waiting-time protocol is carried out where the spin glass is first allowed to age at a temperature below $T_g$, followed by a second aging at a lower temperature, \Tw{2}, after it has fully rejuvenated. The model is based on calculating typical coincident growth of correlated regions at the two temperatures. It accounts for the absolute magnitude of the memory effect as a function of both waiting times and temperatures. The data can be explained by the memory loss being a function of the relative change in the correlated volume at the first waiting temperature because of the growth in the correlations at the second waiting temperature.

cond-mat.dis-nn↗

arXiv2023

Pressure-control of non-ferroelastic ferroelectric domains in ErMnO3

Mechanical pressure controls the structural, electric, and magnetic order in solid state systems, allowing to tailor and improve their physical properties. A well-established example is ferroelastic ferroelectrics, where the coupling between pressure and the primary symmetry breaking order parameter enables hysteretic switching of the strain state and ferroelectric domain engineering. Here, we study the pressure-driven response in a non-ferroelastic ferroelectric, ErMnO3, where the classical stress-strain coupling is absent, and the domain formation is governed by creation-annihilation processes of topological defects. By annealing ErMnO3 polycrystals under variable pressures in the MPa-regime, we transform non-ferroelastic vortex-like domains into stripe-like domains. The width of the stripe-like domains is determined by the applied pressure as we confirm by three-dimensional phase field simulations, showing that pressure leads to highly oriented layer-like periodic domains. Our work demonstrates the possibility to utilize mechanical pressure for domain engineering in non-ferroelastic ferroelectrics, providing a processing-accessible lever to control their dielectric, electromechanical, and piezoelectric response.

cond-mat.mtrl-sci↗

arXiv2023

Moir\'e Fringes in Conductive Atomic Force Microscopy

Moir\'e physics plays an important role for the characterization of functional materials and the engineering of physical properties in general, ranging from strain-driven transport phenomena to superconductivity. Here, we report the observation of moir\'e fringes in conductive atomic force microscopy (cAFM) scans gained on the model ferroelectric Er(Mn,Ti)O$_3$. By performing a systematic study of the impact of key experimental parameters on the emergent moir\'e fringes, such as scan angle and pixel density, we demonstrate that the observed fringes arise due to a superposition of the applied raster scanning and sample-intrinsic properties, classifying the measured modulation in conductance as a scanning moir\'e effect. Our findings are important for the investigation of local transport phenomena in moir\'e engineered materials by cAFM, providing a general guideline for distinguishing extrinsic from intrinsic moir\'e effects. Furthermore, the experiments provide a possible pathway for enhancing the sensitivity, pushing the resolution limit of local transport measurements by probing conductance variations at the spatial resolution limit via more long-ranged moir\'e patterns.

cond-mat.mtrl-sci↗

arXiv2022

Measurement of the total neutron cross section on argon in the 20 to 70 keV energy range

The cross section for neutron interactions on argon is an important design and operational parameter for a number of neutrino, dark matter, and neutrinoless double beta decay experiments which use liquid argon as a detection or shielding medium. There is a discrepancy between the evaluated total cross section in the $20$ to $70~\rm$\,keV neutron kinetic energy region given in the ENDF database and a single measurement conducted by an experiment with a thin target (0.2 atoms/barn) optimized for higher cross sections. This gives rise to significant uncertainty in the interaction length of neutrons in liquid argon. This discrepancy is now resolved by new results presented here from the Argon Resonance Transport Interaction Experiment (ARTIE), a thick target experiment (3.3 atoms/barn) optimized for the small cross sections in this energy region.

nucl-ex↗