arXiv subjects

J. Jiang

Publications and source records attributed to J. Jiang.

At least 91 records · Page 5Linked to original sources

arXiv2014

The effect of interdependence on the percolation of interdependent networks

Two stochastic models are proposed to generate a system composed of two interdependent scale-free (SF) or Erdős-Rényi (ER) networks where interdependent nodes are connected with exponential or power-law relation, as well as different dependence strength, respectively. Each subnetwork grows through the addition of new nodes with constant accelerating random attachment in the first model but with preferential attachment in the second model. Two subnetworks interact with multi-support and undirectional dependence links. The effect of dependence relations and strength between subnetworks are analyzed in the percolation behavior of fully interdependent networks against random failure, both theoretically and numerically, and as a result, for both relations: interdependent SF networks show a second-order percolation phase transition and increased dependence strength decreases the robustness of the system, whereas, interdependent ER networks show the opposite results. In addition, power-law relation between networks yields greater robustness than exponential one at given dependence strength.

physics.soc-ph↗

arXiv2014

Electronic Structure of Single Crystalline NdO$_{0.5}$F$_{0.5}$BiS$_{2}$ Studied by Angle-resolved Photoemission Spectroscopy

NdO$_{0.5}$F$_{0.5}$BiS$_{2}$ is a new layered superconductor. We have studied the low-lying electronic structure of a single crystalline NdO$_{0.5}$F$_{0.5}$BiS$_{2}$ superconductor, whose superconducting transition temperature is 4.87K, with angle-resolved photoemission spectroscopy. The Fermi surface consists of two small electron pockets around the X point and shows little warping along the $k_z$ direction. Our results demonstrate the multi-band and two-dimensional nature of the electronic structure. The good agreement between the photoemission data and the band calculations gives the renormalization factor of 1, indicating the rather weak electron correlations in this material. Moreover, we found that the actual electron doping level and Fermi surface size are much smaller than what are expected from the nominal composition, which could be largely explained by the bismuth dificiency. The small Fermi pocket size and the weak electron correlations found here put strong constraints on theory, and suggest that the BiS$_2$-based superconductors could be conventional BCS superconductors mediated by the electron-phonon coupling.

cond-mat.supr-con↗

arXiv2014

Optimizing a spin-flip Zeeman slower

We present a design of a spin-flip Zeeman slower controlled by a fast feedback circuit for a sodium Bose-Einstein condensate apparatus. We also demonstrate how the efficiency of the slower strongly depends on its intrinsic parameters, and compare these observations with a few theoretical models. Our findings lead to a simple three-step procedure of designing an optimal Zeeman slower for neutral atoms, especially for those atomic species with high initial velocities, such as sodium and lithium atoms.

cond-mat.quant-gas↗

arXiv2013

Long division unites - long union divides, a model for social network evolution

A remarkable phenomenon in the time evolution of many networks such as cultural, political, national and economic systems, is the recurrent transition between the states of union and division of nodes. In this work, we propose a phenomenological modeling, inspired by the maxim "long union divides and long division unites", in order to investigate the evolutionary characters of these networks composed of the entities whose behaviors are dominated by these two events. The nodes are endowed with quantities such as identity, ingredient, richness (power), openness (connections), age, distance, interaction etc. which determine collectively the evolution in a probabilistic way. Depending on a tunable parameter, the time evolution of this model is mainly an alternative domination of union or division state, with a possible state of final union dominated by one single node.

physics.soc-ph↗

arXiv2013

Dynamics in spinor condensates controlled by a microwave dressing field

We experimentally study spin dynamics in a sodium antiferromagnetic spinor condensate with off-resonant microwave pulses. In contrast to a magnetic field, a microwave dressing field enables us to explore rich spin dynamics under the influence of a negative net quadratic Zeeman shift $q_{\rm net}$. We find an experimental signature to determine the sign of $q_{\rm net}$, and observe harmonic spin population oscillations at every $q_{\rm net}$ except near each separatrix in phase space where spin oscillation period diverges. In the negative and positive $q_{\rm net}$ regions, we also observe a remarkably different relationship between each separatrix and the magnetization. Our data confirms an important prediction derived from the mean-field theory: spin-mixing dynamics in spin-1 condensates substantially depends on the sign of the ratio of $q_{\rm net}$ and the spin-dependent interaction energy. This work may thus be the first to use only one atomic species to reveal mean-field spin dynamics, especially the separatrix, which are predicted to appear differently in spin-1 antiferromagnetic and ferromagnetic spinor condensates.

cond-mat.quant-gas↗

arXiv2013

Limits to solar cycle predictability: Cross-equatorial flux plumes

Within the Babcock-Leighton framework for the solar dynamo, the strength of a cycle is expected to depend on the strength of the dipole moment or net hemispheric flux during the preceding minimum, which depends on how much flux was present in each hemisphere at the start of the previous cycle and how much net magnetic flux was transported across the equator during the cycle. Some of this transport is associated with the random walk of magnetic flux tubes subject to granular and supergranular buffeting, some of it is due to the advection caused by systematic cross-equatorial flows such as those associated with the inflows into active regions, and some crosses the equator during the emergence process. We aim to determine how much of the cross-equatorial transport is due to small-scale disorganized motions (treated as diffusion) compared with other processes such as emergence flux across the equator. We measure the cross-equatorial flux transport using Kitt Peak synoptic magnetograms, estimating both the total and diffusive fluxes. Occasionally a large sunspot group, with a large tilt angle emerges crossing the equator, with flux from the two polarities in opposite hemispheres. The largest of these events carry a substantial amount of flux across the equator (compared to the magnetic flux near the poles). We call such events cross-equatorial flux plumes. There are very few such large events during a cycle, which introduces an uncertainty into the determination of the amount of magnetic flux transported across the equator in any particular cycle. As the amount of flux which crosses the equator determines the amount of net flux in each hemisphere, it follows that the cross-equatorial plumes introduce an uncertainty in the prediction of the net flux in each hemisphere. This leads to an uncertainty in predictions of the strength of the following cycle.

astro-ph.SR↗

arXiv2013

Artificially engineered superlattices of pnictide superconductor

Significant progress has been achieved in fabricating high quality bulk and thinfilm iron-based superconductors. In particular, artificial layered pnictide superlattices offer the possibility of tailoring the superconducting properties and understanding the mechanism of the superconductivity itself. For high field applications, large critical current densities (Jc) and irreversibility fields (Hirr) are indispensable along all crystal directions. On the other hand, the development of superconducting devices such as tunnel junctions requires multilayered heterostructures. Here we show that artificially engineered undoped Ba-122 / Co doped Ba-122 compositionally modulated superlattices produce ab-aligned nanoparticle arrays. These layer and self-assemble along c-axis aligned defects, and combine to produce very large Jc and Hirr enhancements over a wide angular range. We also demonstrate a structurally modulated SrTiO3 (STO) / Co doped Ba-122 superlattice with sharp interfaces. Success in superlattice fabrication involving pnictides will aid the progress of heterostructured systems exhibiting novel interfacial phenomena and device applications.

cond-mat.supr-con↗

arXiv2013

Electrodynamics of BaFe2As2 from infrared measurements under pressure

We report on an infrared study on the undoped compound BaFe2As2 as a function of both pressure (up to about 10 GPa) at three temperatures (300, 160, and 110 K). The evolution with pressure and temperature of the optical conductivity shows that, by increasing pressure, the mid-infrared absorptions associated with magnetic order are lowered while the Drude term increases, indicating the evolution towards a conventional metallic state. We evaluate the spectral weight dependence on pressure comparing it to that previously found upon doping. The whole optical results indicate that lattice modifications can not be recognized as the only parameter determining the low-energy electrodynamics in these compounds.

cond-mat.str-el↗

arXiv2013

Observation of in-gap surface states in the Kondo insulator SmB6 by photoemission

Kondo insulators (KIs) are strongly correlated materials in which the interactions between 4f and conduction electrons lead to a hybridization gap opening at low temperature 1-2. SmB6 is a typical KI, but its resistivity does not diverge at low temperatures, which was attributed to some in-gap states 3-10. However after several decades of research, the nature and origin of the in-gap states remain unclear. Recent band calculation and transport measurements suggest that the in-gap states could actually be ascribed to topological surface states. SmB6 thus might be the first realization of topological Kondo insulator (TKI) 13, the strongly correlated version of topological insulator (TI) 11,12. Here by performing angle-resolved photoemission spectroscopy (ARPES), we directly observed several dispersive states within the hybridization gap of SmB6, which cross the Fermi level and show negligible kz dependence, indicative of their surface origin. Furthermore, the circular dichroism (CD) ARPES results of the in-gap states suggest the chirality of orbital momentum, and temperature dependent measurements have shown that the in-gap states vanish simultaneously with the hybridization gap around 150 K. These strongly suggest their possible topological origin.

cond-mat.str-el↗

arXiv2013

A simple and efficient all-optical production of spinor condensates

We present a simple and optimal experimental scheme for an all-optical production of a sodium spinor Bose-Einstein condensate (BEC). With this scheme, we demonstrate that the number of atoms in a pure BEC can be greatly boosted by a factor of 5 in a simple setup that includes a single-beam optical trap or a crossed optical trap. This optimal scheme avoids technical challenges associated with some all-optical BEC methods, and can be applied to other optically trappable atomic species. In addition, we find a good agreement between our theoretical model and data. The upper limit for the efficiency of evaporative cooling in all-optical BEC approaches is also discussed.

cond-mat.quant-gas↗

arXiv2013

Mechanochemical synthesis of pnictide compounds and superconducting Ba0.6K0.4Fe2As2 bulks with high critical current density

BaFe2As2 (Ba-122) and (Ba0.6K0.4)Fe2As2 (K-doped Ba-122) powders were successfully synthesized from the elements using a reaction method, which incorporates a mechanochemical reaction using high-impact ball milling. Mechanically-activated, self-sustaining reactions (MSR) were observed while milling the elements together to form these compounds. After the MSR, the Ba-122 phase had formed, the powder had an average grain size < 1 μm, and the material was effectively mixed. X-ray diffraction confirmed Ba-122 was the primary phase present after milling. Heat treatment of the K-doped MSR powder at high temperature and pressure yielded dense samples with high phase purity but only granular current flow could be visualized by magneto optical imaging. In contrast, a short, low temperature, heat treatment at ambient pressure resulted in global current flow throughout the bulk sample even though the density was lower and impurity phases were more prevalent. An optimized heat treatment involving a two-step, low temperature, heat treatment of the MSR powder produced bulk material with very high critical current density above 0.1 MAcm-2 (4.2 K, 0 T).

cond-mat.supr-con↗

arXiv2013

A transformative superconducting magnet technology for fields well above 30 T using isotropic round wire multifilament Bi2Sr2CaCu2O8-x conductor

We report here that magnetic fields of almost 34 T, far above the upper 24 T limit of Nb3Sn, can be generated using a multifilament round wire conductor made of the high temperature cuprate superconductor Bi2Sr2CaCu2O8-x (Bi-2212). A remarkable attribute of this Bi-2212 conductor is that it does not exhibit macroscopic texture and contains many high angle grain boundaries but nevertheless attains very high superconducting critical current densities Jc of 2500 A/mm2 at 20 T and 4.2 K. This Bi-2212 conductor does not possess the extreme texture that high Jc coated conductors of REBa2Cu3O7-x (REBCO) require, avoiding also its high aspect ratio, large superconducting anisotropy and the inherent sensitivity to defects of a single filament conductor. Bi-2212 wires can be wound or cabled into almost any type of superconducting magnet and will be especially valuable for very high field NMR magnets beyond the present 1 GHz proton resonance limit of Nb3Sn technology. This demonstration that grain boundary limits to high Jc can be practically overcome suggests the huge value of a renewed focus on grain boundary properties in non-ideal geometries, especially with the goal of translating the lessons of this Bi-2212 conductor into fabrication of multifilament round wire REBCO or Fe-based superconductors.

cond-mat.supr-con↗

arXiv2013

Modeling Solar Cycles 15 to 21 Using a Flux Transport Dynamo

Context: The Sun's polar fields and open flux around the time of activity minima have been considered to be strongly correlated with the strength of the subsequent maximum of solar activity. Aims: We aim to investigate the behavior of a Babcock-Leighton dynamo with a source poloidal term that is based on the observed sunspot areas and tilts. In particular, we investigate whether the toroidal fields at the base of convection zone from the model are correlated with the observed solar cycle activity maxima. Methods: We used a flux transport dynamo model that includes convective pumping and a poloidal source term based on the historical record of sunspot group areas, locations, and tilt angles to simulate solar cycles 15 to 21. Results: We find that the polar fields near minima and the toroidal flux at the base of the convection zone are both highly correlated with the subsequent maxima of solar activity levels (r = 0.85 and r = 0.93, respectively). Conclusions: The Babcock-Leighton dynamo is consistent with the observationally inferred correlations.

astro-ph.SR↗

arXiv2013

Role of internal gases and creep of Ag in controlling the critical current density of Ag-sheathed Bi2Sr2CaCu2Ox wires

High engineering critical current density JE of >500 A/mm2 at 20 T and 4.2 K can be regularly achieved in Ag-sheathed multifilamentary Bi2Sr2CaCu2Ox (Bi-2212) round wire when the sample length is several centimeters. However, JE(20 T) in Bi-2212 wires of several meters length, as well as longer pieces wound in coils, rarely exceeds 200 A/mm2. Moreover, long-length wires often exhibit signs of Bi-2212 leakage after melt processing that are rarely found in short, open-end samples. We studied the length dependence of JE of state-of-the-art powder-in-tube (PIT) Bi-2212 wires and gases released by them during melt processing using mass spectroscopy, confirming that JE degradation with length is due to wire swelling produced by high internal gas pressures at elevated temperatures [1,2]. We further modeled the gas transport in Bi-2212 wires and examined the wire expansion at critical stages of the melt processing of as-drawn PIT wires and the wires that received a degassing treatment or a cold-densification treatment before melt processing. These investigations showed that internal gas pressure in long-length wires drives creep of the Ag sheath during the heat treatment, causing wire to expand, lowering the density of Bi-2212 filaments, and therefore degrading the wire JE; the creep rupture of silver sheath naturally leads to the leakage of Bi-2212 liquid. Our work shows that proper control of such creep is the key to preventing Bi-2212 leakage and achieving high JE in long-length Bi-2212 conductors and coils.

cond-mat.supr-con↗

arXiv2013

MHD Simulation of the Inner-Heliospheric Magnetic Field

Maps of the radial magnetic field at a heliocentric distance of ten solar radii are used as boundary conditions in the MHD code CRONOS to simulate a 3D inner-heliospheric solar wind emanating from the rotating Sun out to 1 AU. The input data for the magnetic field are the result of solar surface flux transport modelling using observational data of sunspot groups coupled with a current sheet source surface model. Amongst several advancements, this allows for higher angular resolution than that of comparable observational data from synoptic magnetograms. The required initial conditions for the other MHD quantities are obtained following an empirical approach using an inverse relation between flux tube expansion and radial solar wind speed. The computations are performed for representative solar minimum and maximum conditions, and the corresponding state of the solar wind up to the Earths orbit is obtained. After a successful comparison of the latter with observational data, they can be used to drive outer-heliospheric models.

physics.space-ph↗

arXiv2013

Anisotropic but nodeless superconducting gap in the presence of spin density wave in iron-pnictide superconductor NaFe1-xCoxAs

The coexisting regime of spin density wave (SDW) and superconductivity in the iron pnictides represents a novel ground state. We have performed high resolution angle-resolved photoemission measurements on NaFe1-xCoxAs (x = 0.0175) in this regime and revealed its distinctive electronic structure, which provides some microscopic understandings of its behavior. The SDW signature and the superconducting gap are observed on the same bands, illustrating the intrinsic nature of the coexistence. However, because the SDW and superconductivity are manifested in different parts of the band structure, their competition is non-exclusive. Particularly, we found that the gap distribution is anisotropic and nodeless, in contrast to the isotropic superconducting gap observed in an SDW-free NaFe1-xCoxAs (x=0.045), which puts strong constraints on theory.

cond-mat.supr-con↗

arXiv2012

Artificial and self-assembled pinning centers in Ba(Fe1-xCox)2As2 thin films as a route to very high current density

We report on the superior vortex pinning of single and multilayer Ba(Fe1-xCox)2As2 thin films with self-assembled c-axis and artificially introduced ab-plane pins. Ba(Fe1-xCox)2As2 can accept a very high density of pins (15-20 vol%) without Tc suppression. The matching field is greater than 12 T, producing a significant enhancement of the critical current density Jc, an almost isotropic Jc (Theta,20T) > 10^5 A/cm2, and global pinning force density Fp of about 50 GN/m^3. This scenario strongly differs from the high temperature cuprates where the addition of pins without Tc suppression is limited to 2-4 vol%, leading to small HIrr enhancements and improved Jc only below 3-5 Tesla.

cond-mat.supr-con↗

arXiv2012

High intergrain critical current density in fine-grain (Ba0.6K0.4)Fe2As2 wires and bulks

The K- and Co-doped BaFe2As2 (Ba-122) superconducting compounds are potentially useful for applications because they have upper critical fields (Hc2) of well over 50 T, Hc2 anisotropy Gamma < 2, and thin film critical current densities exceeding 1 MAcm-2 at 4.2 K. However, thin-film bicrystals of Co-doped Ba-122 clearly exhibit weak link behavior for [001] tilt misorientations of more than about 5 degrees, suggesting that textured substrates would be needed for applications, as in the cuprates. Here we present a contrary and very much more positive result in which untextured polycrystalline (Ba0.6K0.4)Fe2As2 bulks and round wires with high grain boundary density have transport critical current densities well over 0.1 MAcm-2 (SF, 4.2 K), more than 10 times higher than that of any other ferropnictide wire. The enhanced grain connectivity is ascribed to their much improved phase purity and to the enhanced vortex stiffness of this low-anisotropy compound (Gamma ~ 1-2) compared to YBa2Cu3O7-x (Gamma ~ 5).

cond-mat.supr-con↗