arXiv subjects

J. Johansson

Publications and source records attributed to J. Johansson.

72 records · Page 4Linked to original sources

arXiv2011

Probing High Frequency Noise with Macroscopic Resonant Tunneling

We have developed a method for extracting the high-frequency noise spectral density of an rf-SQUID flux qubit from macroscopic resonant tunneling (MRT) rate measurements. The extracted noise spectral density is consistent with that of an ohmic environment up to frequencies ~ 4 GHz. We have also derived an expression for the MRT lineshape expected for a noise spectral density consisting of such a broadband ohmic component and an additional strongly peaked low-frequency component. This hybrid model provides an excellent fit to experimental data across a range of tunneling amplitudes and temperatures.

cond-mat.supr-con↗

arXiv2010

On the spectral resolution of the MILES stellar library

Empirical stellar libraries are extensively used to extract stellar kinematics in galaxies and to build stellar population models. An accurate knowledge of the spectral resolution of these libraries is critical to avoid propagation errors and uncertain estimates of the intrinsic stellar velocity dispersion of galaxies. In this research note we re-assess the spectral resolution of the MILES stellar library and of the stellar population models based on it. This exercise was performed, because of a recent controversy over the exact MILES resolution. We perform our test through the comparison of MILES stellar spectra with three different sets of higher-resolution templates, one fully theoretical - the MARCS library - and two empirical ones, namely the Indo-U.S. and ELODIE v3.1 libraries. The theoretical template has a well-defined very high (R=20000) resolution. Hence errors on this theoretical value do not affect our conclusions. Our approach based on the MARCS library was crucial to constrain the values of the resolution also for the other two empirical templates. We find that the MILES resolution has previously been slightly overestimated. We derive a new spectral resolution of 2.54 A FWHM, instead of the nominal 2.3 A. The reason for this difference is due to an overestimation of the resolution for the Indo-U.S. library that was previously used for estimates of the MILES resolution. For the Indo-U.S. we obtain a new value of 1.35 A FWHM. Most importantly, the results derived from the MARCS and ELODIE libraries are in very good agreement. These results are important for users of the MILES spectra library and for further development of stellar population models aimed to obtain accurate stellar kinematics in galaxies.

astro-ph.CO↗

arXiv2010

A scalable readout system for a superconducting adiabatic quantum optimization system

We have designed, fabricated and tested an XY-addressable readout system that is specifically tailored for the reading of superconducting flux qubits in an integrated circuit that could enable adiabatic quantum optimization. In such a system, the flux qubits only need to be read at the end of an adiabatic evolution when quantum mechanical tunneling has been suppressed, thus simplifying many aspects of the readout process. The readout architecture for an $N$-qubit adiabatic quantum optimization system comprises $N$ hysteretic dc SQUIDs and $N$ rf SQUID latches controlled by $2\sqrt{N} + 2$ bias lines. The latching elements are coupled to the qubits and the dc SQUIDs are then coupled to the latching elements. This readout scheme provides two key advantages: First, the latching elements provide exceptional flux sensitivity that significantly exceeds what may be achieved by directly coupling the flux qubits to the dc SQUIDs using a practical mutual inductance. Second, the states of the latching elements are robust against the influence of ac currents generated by the switching of the hysteretic dc SQUIDs, thus allowing one to interrogate the latching elements repeatedly so as to mitigate the effects of stochastic switching of the dc SQUIDs. We demonstrate that it is possible to achieve single qubit read error rates of $<10^{-6}$ with this readout scheme. We have characterized the system-level performance of a 128-qubit readout system and have measured a readout error probability of $8\times10^{-5}$ in the presence of optimal latching element bias conditions.

cond-mat.supr-con↗

arXiv2010

Experimental Investigation of an Eight Qubit Unit Cell in a Superconducting Optimization Processor

A superconducting chip containing a regular array of flux qubits, tunable interqubit inductive couplers, an XY-addressable readout system, on-chip programmable magnetic memory, and a sparse network of analog control lines has been studied. The architecture of the chip and the infrastructure used to control it were designed to facilitate the implementation of an adiabatic quantum optimization algorithm. The performance of an eight-qubit unit cell on this chip has been characterized by measuring its success in solving a large set of random Ising spin glass problem instances as a function of temperature. The experimental data are consistent with the predictions of a quantum mechanical model of an eight-qubit system coupled to a thermal environment. These results highlight many of the key practical challenges that we have overcome and those that lie ahead in the quest to realize a functional large scale adiabatic quantum information processor.

cond-mat.supr-con↗

arXiv2010

Observation of Co-tunneling in Pairs of Coupled Flux Qubits

We report measurements of macroscopic resonant tunneling between the two lowest energy states of a pair of magnetically coupled rf-SQUID flux qubits. This technique provides a direct means of observing two-qubit dynamics and a probe of the environment coupled to the pair of qubits. Measurements of the tunneling rate as a function of qubit flux bias show a Gaussian line shape that is well matched to theoretical predictions. Moreover, the peak widths indicate that each qubit is coupled to a local environment whose fluctuations are uncorrelated with that of the other qubit.

cond-mat.supr-con↗

arXiv2010

A scalable control system for a superconducting adiabatic quantum optimization processor

We have designed, fabricated and operated a scalable system for applying independently programmable time-independent, and limited time-dependent flux biases to control superconducting devices in an integrated circuit. Here we report on the operation of a system designed to supply 64 flux biases to devices in a circuit designed to be a unit cell for a superconducting adiabatic quantum optimization system. The system requires six digital address lines, two power lines, and a handful of global analog lines.

quant-ph↗

arXiv2009

Experimental Demonstration of a Robust and Scalable Flux Qubit

A novel rf-SQUID flux qubit that is robust against fabrication variations in Josephson junction critical currents and device inductance has been implemented. Measurements of the persistent current and of the tunneling energy between the two lowest lying states, both in the coherent and incoherent regime, are presented. These experimental results are shown to be in agreement with predictions of a quantum mechanical Hamiltonian whose parameters were independently calibrated, thus justifying the identification of this device as a flux qubit. In addition, measurements of the flux and critical current noise spectral densities are presented that indicate that these devices with Nb wiring are comparable to the best Al wiring rf-SQUIDs reported in the literature thusfar, with a $1/f$ flux noise spectral density at $1 $Hz of $1.3^{+0.7}_{-0.5} μΦ_0/\sqrt{\text{Hz}}$. An explicit formula for converting the observed flux noise spectral density into a free induction decay time for a flux qubit biased to its optimal point and operated in the energy eigenbasis is presented.

cond-mat.supr-con↗

arXiv2009

A Compound Josephson Junction Coupler for Flux Qubits With Minimal Crosstalk

An improved tunable coupling element for building networks of coupled rf-SQUID flux qubits has been experimentally demonstrated. This new form of coupler, based upon the compound Josephson junction rf-SQUID, provides a sign and magnitude tunable mutual inductance between qubits with minimal nonlinear crosstalk from the coupler tuning parameter into the qubits. Quantitative agreement is shown between an effective one-dimensional model of the coupler's potential and measurements of the coupler persistent current and susceptibility.

cond-mat.supr-con↗

arXiv2009

Implementation of a Quantum Annealing Algorithm Using a Superconducting Circuit

A circuit consisting of a network of coupled compound Josephson junction rf-SQUID flux qubits has been used to implement an adiabatic quantum optimization algorithm. It is shown that detailed knowledge of the magnitude of the persistent current as a function of annealing parameters is key to implementation of the algorithm on this particular type of hardware. Experimental results contrasting two annealing protocols, one with and one without active compensation for the growth of the qubit persistent current during annealing, are presented in order to illustrate this point.

cond-mat.mes-hall↗

arXiv2009

Synchronization of Multiple Coupled rf-SQUID Flux Qubits

A practical strategy for synchronizing the properties of compound Josephson junction rf-SQUID qubits on a multiqubit chip has been demonstrated. The impacts of small ($\sim1%$) fabrication variations in qubit inductance and critical current can be minimized by the application of a custom tuned flux offset to the CJJ structure of each qubit. This strategy allows for simultaneous synchronization of the qubit persistent current and tunnel splitting over a range of external bias parameters that is relevant for the implementation of an adiabatic quantum processor.

cond-mat.mes-hall↗

arXiv2008

Geometrical dependence of low frequency noise in superconducting flux qubits

A general method for directly measuring the low-frequency flux noise (below 10 Hz) in compound Josephson junction superconducting flux qubits has been used to study a series of 85 devices of varying design. The variation in flux noise across sets of qubits with identical designs was observed to be small. However, the levels of flux noise systematically varied between qubit designs with strong dependence upon qubit wiring length and wiring width. Furthermore, qubits fabricated above a superconducting ground plane yielded lower noise than qubits without such a layer. These results support the hypothesis that localized magnetic impurities in the vicinity of the qubit wiring are a key source of low frequency flux noise in superconducting devices.

cond-mat.mes-hall↗

arXiv2008

Landau-Zener Transitions in an Adiabatic Quantum Computer

We report an experimental measurement of Landau-Zener transitions on an individual flux qubit within a multi-qubit superconducting chip designed for adiabatic quantum computation. The method used isolates a single qubit, tunes its tunneling amplitude Delta into the limit where Delta is much less than both the temperature T and the decoherence-induced energy level broadening, and forces it to undergo a Landau-Zener transition. We find that the behavior of the qubit agrees to a high degree of accuracy with theoretical predictions for Landau-Zener transition probabilities for a double-well quantum system coupled to 1/f magnetic flux noise.

cond-mat.mes-hall↗

arXiv2008

Probing Noise in Flux Qubits via Macroscopic Resonant Tunneling

Macroscopic resonant tunneling between the two lowest lying states of a bistable RF-SQUID is used to characterize noise in a flux qubit. Measurements of the incoherent decay rate as a function of flux bias revealed a Gaussian shaped profile that is not peaked at the resonance point, but is shifted to a bias at which the initial well is higher than the target well. The r.m.s. amplitude of the noise, which is proportional to the decoherence rate 1/T_2^*, was observed to be weakly dependent on temperature below 70 mK. Analysis of these results indicates that the dominant source of low frequency (1/f) flux noise in this device is a quantum mechanical environment in thermal equilibrium.

cond-mat.mes-hall↗

arXiv2006

Levitated droplet dye laser

We present the first observation, to our knowledge, of lasing from a levitated, dye droplet. The levitated droplets are created by computer controlled pico-liter dispensing into one of the nodes of a standing ultrasonic wave (100 kHz), where the droplet is trapped. The free hanging droplet forms a high quality optical resonator. Our 750 nL lasing droplets consist of Rhodamine 6G dissolved in ethylene glycol, at a concentration of 0.02 M. The droplets are optically pumped at 532 nm light from a pulsed, frequency doubled Nd:YAG laser, and the dye laser emission is analyzed by a fixed grating spectrometer. With this setup we have achieved reproducible lasing spectra in the visible wavelength range from 610 nm to 650 nm. The levitated droplet technique has previously successfully been applied for a variety of bio-analytical applications at single cell level. In combination with the lasing droplets, the capability of this high precision setup has potential applications within highly sensitive intra-cavity absorbance detection.

physics.optics↗

arXiv2006

Enhanced spin accumulation in a superconductor

A lateral array of ferromagnetic tunnel junctions is used to inject and detect non-equilibrium quasi-particle spin distribution in a superconducting strip made of Al. The strip width and thickness is kept below the quasi particle spin diffusion length in Al. Non-local measurements in multiple parallel and antiparallel magnetic states of the detectors are used to in-situ determine the quasi-particle spin diffusion length. A very large increase in the spin accumulation in the superconducting state compared to that in the normal state is observed and is attributed to a diminishing of the quasi-particle population by opening of the gap below the transition temperature.

cond-mat.mes-hall↗

arXiv2005

Vacuum Rabi oscillations in a macroscopic superconducting qubit LC oscillator system

We have observed the coherent exchange of a single energy quantum between a flux qubit and a superconducting LC circuit acting as a quantum harmonic oscillator. The exchange of an energy quantum is known as the vacuum Rabi oscillations: the qubit is oscillating between the excited state and the ground state and the oscillator between the vacuum state and the first excited state. We have also obtained evidence of level quantization of the LC circuit by observing the change in the oscillation frequency when the LC circuit was not initially in the vacuum state.

cond-mat.supr-con↗

arXiv2004

Giant fluctuations of superconducting order parameter in Ferromagnet/superconductor single electron transistors

Spin dependent transport in a ferromagnet/superconductor/ferromagnet single electron transistor is studied theoretically with spin accumulation, spin relaxation, gap suppression, and charging effects taken into account. A strong dependence of the gap on the magnetic state of the outer electrodes is found, which gives rise to a negative magneto-resistance of up to 100 %. We predict that fluctuations of the spin accumulation due to tunneling of quasi-particles can play such an important role as to cause the island to fluctuate between the superconducting

cond-mat.mes-hall↗

arXiv2000

Random background charges and Coulomb blockade in one-dimensional tunnel junction arrays

We have numerically studied the behavior of one dimensional tunnel junction arrays when random background charges are included using the ``orthodox'' theory of single electron tunneling. Random background charge distributions are verified in both amplitude and density. The use of a uniform array as a transistor is discussed both with and without random background charges. An analytic expression for the gain near zero gate voltage in a uniform array with no background charges is derived. The gate modulation with background charges present is simulated.

cond-mat.mes-hall↗