arXiv subjects

J. Kilkenny

Publications and source records attributed to J. Kilkenny.

5 recordsLinked to original sources

arXiv2026

Indirect-Drive Fusion Target Design for Commercial Fusion Energy

This paper presents the physics basis for commercially relevant laser indirect-drive (LID) (radiation-driven) inertial fusion energy (IFE) using a 10 MJ laser driver. To date, this approach, proven at the National Ignition Facility (NIF), remains the first and only controlled fusion method to demonstrate the key physics required for fusion energy production, including a self-sustained burning plasma, substantially de-risking the path to commercial fusion energy. Building directly on these results, we present scaled designs to larger target sizes and fusion gains relevant for commercial power generation ($G\sim 26$--$43$). The designs remain close to experimentally demonstrated ignition physics, modifying target components to improve scalability, manufacturability, and cost-effectiveness for fusion energy applications while preserving ignition-relevant implosion physics and fusion power plant compatibility. The baseline platform retains a high-density carbon ablator and clean cryogenic DT fuel layering while extending ignition platforms to substantially larger fuel masses (exceeding 10 times that of current ignition experiments at the NIF) and higher burn fractions ($\sim$40\%) with total areal densities at stagnation of $\sim$3~g/cm$^2$. Benchmarked simulations anchored to NIF ignition experiments (using HYDRA and LASNEX) predict that these designs achieve robust ignition and propagating burn at substantially higher fusion yields (265--427~MJ) with significant ignition margin (2--4$\times$ relative to NIF) against hydrodynamic instabilities and representative power-plant non-idealities, including low-mode asymmetry, polycrystalline DT ice roughness, HDC ablator voids, and target-support and fill-hole perturbations. We also show that implosion symmetry and laser-plasma interactions (LPI) can be controlled with our novel multi-beam configuration using thousands of laser beam-lines.

physics.plasm-ph↗

arXiv2026

Absolute Calibration of a Time-Resolved High Resolution X-ray Spectrometer for the National Ignition Facility (invited)

A high resolution, Diagnostic Instrument Manipulator (DIM)-based x-ray Bragg crystal spectrometer has been calibrated for and deployed at the National Ignition Facility (NIF) to diagnose plasma conditions in ignition capsules near stagnation times. The spectrometer has two conical crystals in the Hall geometry focusing rays from the Kr He$α$, Ly$α$, and He$β$ complexes onto a streak camera, with the physics objectives of measuring time-resolved electron density and temperature through observing Stark broadening and the relative intensities of dielectronic satellites. A third von Hámos crystal that time-integrates the Kr He$α$, He$β$ and intervening energy range provides in-situ calibration for the streak camera signals. The spectrometer has been absolutely calibrated using a microfocus x-ray source, an array of CCD and single-photon-counting detectors, and multiple K- and L-absorption edge filters at the Princeton Plasma Physics Laboratory (PPPL) x-ray laboratory. Measurements of the integrated reflectivity, energy range, and energy resolution for each crystal are discussed. These calibration data provide absolute x-ray signal levels for NIF measurements, enabling precise filter selection and comparisons to simulations.

physics.plasm-ph↗

arXiv2026

Hot Spot Evolution Measured by High-Resolution X-Ray Spectroscopy at the National Ignition Facility

Evolution of the hot spot plasma conditions was measured using high-resolution x-ray spectroscopy at the National Ignition Facility (NIF). The capsules were filled with DD gas with trace levels of Kr, and had either a high-density-carbon (HDC) ablator or a tungsten (W)-doped HDC ablator. Time-resolved measurement of the Kr He$β$ spectra, absolutely calibrated by a simultaneous time-integrated measurement, allows inference of the electron density and temperature through observing Stark broadening and the relative intensities of dielectronic satellites. By matching the calculated hot spot emission using a collisional-radiative code to experimental observations, the hot spot size and areal density are determined. These advanced spectroscopy techniques further reveal the effect of W dopant in the ablator on the hot spot parameters for their improved implosion performance.

physics.plasm-ph↗

arXiv2021

Experiments conducted in the burning plasma regime with inertial fusion implosions

An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into x-ray radiation which in turn drives the DT fuel filled capsule causing it to implode. Previous experiments reported DT fuel gain exceeding unity [O.A. Hurricane et al., Nature 506, 343 (2014)] and then exceeding the kinetic energy of the imploding fuel [S. Le Pape et al., Phys. Rev. Lett. 120, 245003 (2018)]. We report on recent experiments that have achieved record fusion neutron yields on NIF, greater than 100 kJ with momentary fusion powers exceeding 1PW, and have for the first time entered the burning plasma regime where fusion alpha-heating of the fuel exceeds the energy delivered to the fuel via compression. This was accomplished by increasing the size of the high-density carbon (HDC) capsule, increasing energy coupling, while controlling symmetry and implosion design parameters. Two tactics were successful in controlling the radiation flux symmetry and therefore the implosion symmetry: transferring energy between laser cones via plasma waves, and changing the shape of the hohlraum. In conducting these experiments, we controlled for known sources of degradation. Herein we show how these experiments were performed to produce record performance, and demonstrate the data fidelity leading us to conclude that these shots have entered the burning plasma regime.

physics.plasm-ph↗

arXiv2018

Inference of the electron temperature in ICF implosions from the hard X-ray spectral continuum

Using the free-free continuum self-emission spectrum at photon energies above 15 keV is one of the most promising concepts for assessing the electron temperature in ICF experiments. However, these photons are due to suprathermal electrons whose mean-free-path is much larger than thermal, making their distribution deviate from Maxwellian in a finite-size hot-spot. The first study of the free-free X-ray emission from an ICF implosion is conducted with the kinetic modifications to the electron distribution accounted for. These modifications are found to result in qualitatively new features in the hard X-ray spectral continuum. Inference of the electron temperature as if the emitting electrons are Maxwellian is shown to give a lower value than the actual one.

physics.plasm-ph↗